|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] problem using compiled kernel -- Sisu
Hi, Jeremy: Thanks for the reply. I'll try the .config file on website again.. Best! Yours, Sisu On Thu, Jul 29, 2010 at 7:35 PM, Jeremy Fitzhardinge <jeremy@xxxxxxxx> wrote: > ÂOn 07/29/2010 05:29 PM, Sisu Xi wrote: >> >> Hi, >> >> I reinstalled Fedora 13 on my machine, with my graphic card removed >> (using the integrated one on my motherboard). Still Xen would not >> start normally. My fedora was on /dev/sda3(sda1&2 are windows). I just >> used one volume without swap. Does Xen require swap as a must? > > No, Xen doesn't need swap at all. ÂLinux's requirement for swap is unchanged > under Xen (ie, if you don't need it native, you don't need it under Xen). > > In any case, your crashes have nothing to do with swap; you've managed to > get an entirely new failure-mode. ÂLooks like it might be something to do > with ACPI, but I'm not sure what. > >  ÂJ > >> Below is the serial console output: >> >> Thanks very much! >> >> Best! >> >> Yours, >> Sisu >> >> __ Â__      Â_ Â_  Â___  _       ____ >> Â\ \/ /___ _ __  | || | Â/ _ \ / |  _ __ ___| ___|  Â_ __ Â_ __ ___ >>  \ Â// _ \ '_ \ Â| || |_| | | || |__| '__/ __|___ \ __| '_ \| '__/ _ \ >>  / Â\ Â__/ | | | |__  _| |_| || |__| | | (__ ___) |__| |_) | | | Â__/ >> Â/_/\_\___|_| |_|  Â|_|(_)___(_)_| Â|_| Â\___|____/  | .__/|_| Â\___| >>                            Â|_| >> (XEN) Xen version 4.0.1-rc5-pre (xisisu@xxxxxxxxxxxxx) (gcc version >> 4.4.4 20100630 (Red Hat 4.4.4-10) (GCC) ) Thu Jul 29 11:28:19 EDT 2010 >> (XEN) Latest ChangeSet: Sun Jul 25 22:22:43 2010 +0100 21287:e6b5b2cb8146 >> (XEN) Console output is synchronous. >> (XEN) Command line: dom0_mem=1024M loglvl=all guest_loglvl=all >> sync_console console_to_ring com1=115200,8n1 console=com1 >> (XEN) Video information: >> (XEN) ÂVGA is text mode 80x25, font 8x16 >> (XEN) ÂVBE/DDC methods: V2; EDID transfer time: 1 seconds >> (XEN) Disc information: >> (XEN) ÂFound 1 MBR signatures >> (XEN) ÂFound 1 EDD information structures >> (XEN) Xen-e820 RAM map: >> (XEN) Â0000000000000000 - 00000000000a0000 (usable) >> (XEN) Â00000000000f0000 - 0000000000100000 (reserved) >> (XEN) Â0000000000100000 - 000000007f686c00 (usable) >> (XEN) Â000000007f686c00 - 000000007f688c00 (ACPI NVS) >> (XEN) Â000000007f688c00 - 000000007f68ac00 (ACPI data) >> (XEN) Â000000007f68ac00 - 0000000080000000 (reserved) >> (XEN) Â00000000f0000000 - 00000000f4000000 (reserved) >> (XEN) Â00000000fec00000 - 00000000fed00400 (reserved) >> (XEN) Â00000000fed20000 - 00000000feda0000 (reserved) >> (XEN) Â00000000fee00000 - 00000000fef00000 (reserved) >> (XEN) Â00000000ffb00000 - 0000000100000000 (reserved) >> (XEN) System RAM: 2038MB (2087064kB) >> (XEN) ACPI: RSDP 000FEB00, 0024 (r2 DELL Â) >> (XEN) ACPI: XSDT 000FD24F, 005C (r1 DELL  ÂGX620     Â7 ASL >> Â61) >> (XEN) ACPI: FACP 000FD347, 00F4 (r3 DELL  ÂGX620     Â7 ASL >> Â61) >> (XEN) ACPI: DSDT FFFD32F4, 3D69 (r1  DELL  Âdt_ex   1000 INTL >> 20050309) >> (XEN) ACPI: FACS 7F686C00, 0040 >> (XEN) ACPI: SSDT FFFD717C, 00AA (r1  DELL  Âst_ex   1000 INTL >> 20050309) >> (XEN) ACPI: APIC 000FD43B, 0072 (r1 DELL  ÂGX620     Â7 ASL >> Â61) >> (XEN) ACPI: BOOT 000FD4AD, 0028 (r1 DELL  ÂGX620     Â7 ASL >> Â61) >> (XEN) ACPI: ASF! 000FD4D5, 0067 (r16 DELL  ÂGX620     Â7 ASL >> Â61) >> (XEN) ACPI: MCFG 000FD53C, 003E (r1 DELL  ÂGX620     Â7 ASL >> Â61) >> (XEN) ACPI: HPET 000FD57A, 0038 (r1 DELL  ÂGX620     Â7 ASL >> Â61) >> (XEN) No NUMA configuration found >> (XEN) Faking a node at 0000000000000000-000000007f686000 >> (XEN) Xen heap: 8MB (8852kB) >> (XEN) Domain heap initialised >> (XEN) found SMP MP-table at 000fe710 >> (XEN) DMI 2.3 present. >> (XEN) Using APIC driver default >> (XEN) ACPI: PM-Timer IO Port: 0x808 >> (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0] >> (XEN) ACPI:         Âwakeup_vec[7f686c0c], vec_size[20] >> (XEN) ACPI: Local APIC address 0xfee00000 >> (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) >> (XEN) Processor #0 15:6 APIC version 20 >> (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) >> (XEN) Processor #1 15:6 APIC version 20 >> (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled) >> (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled) >> (XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) >> (XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) >> (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 >> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) >> (XEN) ACPI: IRQ0 used by override. >> (XEN) ACPI: IRQ2 used by override. >> (XEN) ACPI: IRQ9 used by override. >> (XEN) Enabling APIC mode: ÂFlat. ÂUsing 1 I/O APICs >> (XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000 >> (XEN) Using ACPI (MADT) for SMP configuration information >> (XEN) Using scheduler: SMP Credit Scheduler (credit) >> (XEN) Detected 3391.772 MHz processor. >> (XEN) CPU0: VMX disabled by BIOS. >> (XEN) VMX: failed to initialise. >> (XEN) CPU0: Intel Extended MCE MSRs (24) available >> (XEN) Intel machine check reporting enabled >> (XEN) I/O virtualisation disabled >> (XEN) CPU1: Intel Extended MCE MSRs (24) available >> (XEN) Total of 2 processors activated. >> (XEN) ENABLING IO-APIC IRQs >> (XEN) Â-> ÂUsing new ACK method >> (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 >> (XEN) checking TSC synchronization across 2 CPUs: passed. >> (XEN) Platform timer is 14.318MHz HPET >> Ë(XEN) Allocated console ring of 16 KiB. >> (XEN) Brought up 2 CPUs >> (XEN) microcode.c:73:d32767 microcode: CPU1 resumed >> (XEN) HPET: 3 timers in total, 0 timers will be used for broadcast >> (XEN) ACPI sleep modes: S3 >> (XEN) mcheck_poll: Machine check polling timer started. >> (XEN) *** LOADING DOMAIN 0 *** >> (XEN) ÂXen Âkernel: 32-bit, PAE, lsb >> (XEN) ÂDom0 kernel: 32-bit, PAE, lsb, paddr 0x400000 -> Â0xca9000 >> (XEN) PHYSICAL MEMORY ARRANGEMENT: >> (XEN) ÂDom0 alloc.:  0000000038000000->000000003c000000 (245760 pages >> to be allocated) >> (XEN) VIRTUAL MEMORY ARRANGEMENT: >> (XEN) ÂLoaded kernel: c0400000->c0ca9000 >> (XEN) ÂInit. ramdisk: c0ca9000->c22b9000 >> (XEN) ÂPhys-Mach map: c22b9000->c23b9000 >> (XEN) ÂStart info:  Âc23b9000->c23b947c >> (XEN) ÂPage tables:  c23ba000->c23d3000 >> (XEN) ÂBoot stack:  Âc23d3000->c23d4000 >> (XEN) ÂTOTAL:     c0000000->c2800000 >> (XEN) ÂENTRY ADDRESS: c0a25000 >> (XEN) Dom0 has maximum 2 VCPUs >> (XEN) Scrubbing Free RAM: .........done. >> (XEN) trace.c:89:d32767 calc_tinfo_first_offset: NR_CPUs 128, >> offset_in_bytes 258, t_info_first_offset 65 >> (XEN) Xen trace buffers: disabled >> (XEN) Std. Loglevel: All >> (XEN) Guest Loglevel: All >> (XEN) ********************************************** >> (XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS >> (XEN) ******* This option is intended to aid debugging of Xen by ensuring >> (XEN) ******* that all output is synchronously delivered on the serial >> line. >> (XEN) ******* However it can introduce SIGNIFICANT latencies and affect >> (XEN) ******* timekeeping. It is NOT recommended for production use! >> (XEN) ********************************************** >> (XEN) 3... 2... 1... >> (XEN) *** Serial input -> ÂDOM0 (type 'CTRL-a' three times to switch >> input to Xen) >> (XEN) Freed 160kB init memory. >> mapping kernel into physical memory >> Xen: setup ISA identity maps >> about to get started... >> Reserving virtual address space above 0xf5800000 >> Initializing cgroup subsys cpuset >> Initializing cgroup subsys cpu >> Linux version 2.6.32.16 (xisisu@xxxxxxxxxxxxxxxxxxxxxxxx) (gcc version >> 4.4.4 20100630 (Red Hat 4.4.4-10) (GCC) ) #2 SMP PREEMPT Thu Jul 29 >> 13:37:15 EDT 2010 >> KERNEL supported cpus: >>  Intel GenuineIntel >>  AMD AuthenticAMD >>  NSC Geode by NSC >>  Cyrix CyrixInstead >>  Centaur CentaurHauls >>  Transmeta GenuineTMx86 >>  Transmeta TransmetaCPU >>  UMC UMC UMC UMC >> released 0 pages of unused memory >> BIOS-provided physical RAM map: >> ÂXen: 0000000000000000 - 00000000000a0000 (usable) >> ÂXen: 00000000000a0000 - 0000000000100000 (reserved) >> ÂXen: 0000000000100000 - 0000000040000000 (usable) >> ÂXen: 000000007f686c00 - 000000007f688c00 (ACPI NVS) >> ÂXen: 000000007f688c00 - 000000007f68ac00 (ACPI data) >> ÂXen: 000000007f68ac00 - 0000000080000000 (reserved) >> ÂXen: 00000000f0000000 - 00000000f4000000 (reserved) >> ÂXen: 00000000fec00000 - 00000000fed00400 (reserved) >> ÂXen: 00000000fed20000 - 00000000feda0000 (reserved) >> ÂXen: 00000000fee00000 - 00000000fef00000 (reserved) >> ÂXen: 00000000ffb00000 - 0000000100000000 (reserved) >> bootconsole [xenboot0] enabled >> DMI 2.3 present. >> last_pfn = 0x40000 max_arch_pfn = 0x1000000 >> x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106 >> init_memory_mapping: 0000000000000000-000000002cdfe000 >> NX (Execute Disable) protection: active >> RAMDISK: 00ca9000 - 022b9000 >> ACPI: RSDP 000feb00 00024 (v02 DELL Â) >> ACPI: XSDT 000fd24f 0005C (v01 DELL  ÂGX620  00000007 ASL Â00000061) >> ACPI: FACP 000fd347 000F4 (v03 DELL  ÂGX620  00000007 ASL Â00000061) >> ACPI: DSDT fffd32f4 03D69 (v01  DELL  Âdt_ex 00001000 INTL 20050309) >> ACPI: FACS 7f686c00 00040 >> ACPI: SSDT fffd717c 000AA (v01  DELL  Âst_ex 00001000 INTL 20050309) >> ACPI: APIC 000fd43b 00072 (v01 DELL  ÂGX620  00000007 ASL Â00000061) >> ACPI: BOOT 000fd4ad 00028 (v01 DELL  ÂGX620  00000007 ASL Â00000061) >> ACPI: ASF! 000fd4d5 00067 (v16 DELL  ÂGX620  00000007 ASL Â00000061) >> ACPI: MCFG 000fd53c 0003E (v01 DELL  ÂGX620  00000007 ASL Â00000061) >> ACPI: HPET 000fd57a 00038 (v01 DELL  ÂGX620  00000007 ASL Â00000061) >> Node: 0, start_pfn: 0, end_pfn: 40000 >> Reserving total of a00 pages for numa KVA remap >> kva_start_pfn ~ 2c200 max_low_pfn ~ 2cdfe >> max_pfn = 40000 >> 306MB HIGHMEM available. >> 717MB LOWMEM available. >> 1 multicall(s) failed: cpu 0 >> Pid: 0, comm: swapper Not tainted 2.6.32.16 #2 >> Call Trace: >> Â[<c07b4cdf>] ? printk+0xf/0x18 >> Â[<c04045ca>] xen_mc_flush+0x137/0x1f4 >> Â[<c040530a>] xen_mc_issue+0x14/0x23 >> Â[<c04063fa>] xen_set_pmd_hyper+0x7c/0xa3 >> Â[<c042b8bb>] set_pmd_pfn+0xb3/0xc4 >> Â[<c0a3c6c9>] initmem_init+0x4db/0x5f6 >> Â[<c0a326e6>] ? __acpi_unmap_table+0x10/0x12 >> Â[<c0a4da08>] ? acpi_table_parse_madt+0x16/0x18 >> Â[<c0a3180e>] ? acpi_parse_lapic_addr_ovr+0x0/0x30 >> Â[<c0a2b0e2>] setup_arch+0x826/0xa64 >> Â[<c0442d04>] ? vprintk+0x35e/0x3a5 >> Â[<c0406b5c>] ? xen_restore_fl+0x2f/0x58 >> Â[<c0a255f9>] start_kernel+0xbc/0x38d >> Â[<c0a250af>] i386_start_kernel+0x9e/0xa5 >> Â[<c0a28571>] xen_start_kernel+0x5b7/0x5bf >> Â[<c04090a9>] ? signal_fault+0x45/0x92 >> ------------[ cut here ]------------ >> WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x1ec/0x1f4() >> Hardware name: OptiPlex GX620 >> Modules linked in: >> Pid: 0, comm: swapper Not tainted 2.6.32.16 #2 >> Call Trace: >> Â[<c0442140>] warn_slowpath_common+0x65/0x7c >> Â[<c040467f>] ? xen_mc_flush+0x1ec/0x1f4 >> Â[<c0442164>] warn_slowpath_null+0xd/0x10 >> Â[<c040467f>] xen_mc_flush+0x1ec/0x1f4 >> Â[<c040530a>] xen_mc_issue+0x14/0x23 >> Â[<c04063fa>] xen_set_pmd_hyper+0x7c/0xa3 >> Â[<c042b8bb>] set_pmd_pfn+0xb3/0xc4 >> Â[<c0a3c6c9>] initmem_init+0x4db/0x5f6 >> Â[<c0a326e6>] ? __acpi_unmap_table+0x10/0x12 >> Â[<c0a4da08>] ? acpi_table_parse_madt+0x16/0x18 >> Â[<c0a3180e>] ? acpi_parse_lapic_addr_ovr+0x0/0x30 >> Â[<c0a2b0e2>] setup_arch+0x826/0xa64 >> Â[<c0442d04>] ? vprintk+0x35e/0x3a5 >> Â[<c0406b5c>] ? xen_restore_fl+0x2f/0x58 >> Â[<c0a255f9>] start_kernel+0xbc/0x38d >> Â[<c0a250af>] i386_start_kernel+0x9e/0xa5 >> Â[<c0a28571>] xen_start_kernel+0x5b7/0x5bf >> Â[<c04090a9>] ? signal_fault+0x45/0x92 >> ---[ end trace a7919e7f17c0a725 ]--- >> 1 multicall(s) failed: cpu 0 >> Pid: 0, comm: swapper Tainted: G    ÂW Â2.6.32.16 #2 >> Call Trace: >> Â[<c07b4cdf>] ? printk+0xf/0x18 >> Â[<c04045ca>] xen_mc_flush+0x137/0x1f4 >> Â[<c040530a>] xen_mc_issue+0x14/0x23 >> Â[<c04063fa>] xen_set_pmd_hyper+0x7c/0xa3 >> Â[<c042b8bb>] set_pmd_pfn+0xb3/0xc4 >> Â[<c0a3c6c9>] initmem_init+0x4db/0x5f6 >> Â[<c0a326e6>] ? __acpi_unmap_table+0x10/0x12 >> Â[<c0a4da08>] ? acpi_table_parse_madt+0x16/0x18 >> Â[<c0a3180e>] ? acpi_parse_lapic_addr_ovr+0x0/0x30 >> Â[<c0a2b0e2>] setup_arch+0x826/0xa64 >> Â[<c0442d04>] ? vprintk+0x35e/0x3a5 >> Â[<c0406b5c>] ? xen_restore_fl+0x2f/0x58 >> Â[<c0a255f9>] start_kernel+0xbc/0x38d >> Â[<c0a250af>] i386_start_kernel+0x9e/0xa5 >> Â[<c0a28571>] xen_start_kernel+0x5b7/0x5bf >> Â[<c04090a9>] ? signal_fault+0x45/0x92 >> ------------[ cut here ]------------ >> WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x1ec/0x1f4() >> Hardware name: OptiPlex GX620 >> Modules linked in: >> Pid: 0, comm: swapper Tainted: G    ÂW Â2.6.32.16 #2 >> Call Trace: >> Â[<c0442140>] warn_slowpath_common+0x65/0x7c >> Â[<c040467f>] ? xen_mc_flush+0x1ec/0x1f4 >> Â[<c0442164>] warn_slowpath_null+0xd/0x10 >> Â[<c040467f>] xen_mc_flush+0x1ec/0x1f4 >> Â[<c040530a>] xen_mc_issue+0x14/0x23 >> Â[<c04063fa>] xen_set_pmd_hyper+0x7c/0xa3 >> Â[<c042b8bb>] set_pmd_pfn+0xb3/0xc4 >> Â[<c0a3c6c9>] initmem_init+0x4db/0x5f6 >> Â[<c0a326e6>] ? __acpi_unmap_table+0x10/0x12 >> Â[<c0a4da08>] ? acpi_table_parse_madt+0x16/0x18 >> Â[<c0a3180e>] ? acpi_parse_lapic_addr_ovr+0x0/0x30 >> Â[<c0a2b0e2>] setup_arch+0x826/0xa64 >> Â[<c0442d04>] ? vprintk+0x35e/0x3a5 >> Â[<c0406b5c>] ? xen_restore_fl+0x2f/0x58 >> Â[<c0a255f9>] start_kernel+0xbc/0x38d >> Â[<c0a250af>] i386_start_kernel+0x9e/0xa5 >> Â[<c0a28571>] xen_start_kernel+0x5b7/0x5bf >> Â[<c04090a9>] ? signal_fault+0x45/0x92 >> ---[ end trace a7919e7f17c0a726 ]--- >> 1 multicall(s) failed: cpu 0 >> Pid: 0, comm: swapper Tainted: G    ÂW Â2.6.32.16 #2 >> Call Trace: >> Â[<c07b4cdf>] ? printk+0xf/0x18 >> Â[<c04045ca>] xen_mc_flush+0x137/0x1f4 >> Â[<c040530a>] xen_mc_issue+0x14/0x23 >> Â[<c04063fa>] xen_set_pmd_hyper+0x7c/0xa3 >> Â[<c042b8bb>] set_pmd_pfn+0xb3/0xc4 >> Â[<c0a3c6c9>] initmem_init+0x4db/0x5f6 >> Â[<c0a326e6>] ? __acpi_unmap_table+0x10/0x12 >> Â[<c0a4da08>] ? acpi_table_parse_madt+0x16/0x18 >> Â[<c0a3180e>] ? acpi_parse_lapic_addr_ovr+0x0/0x30 >> Â[<c0a2b0e2>] setup_arch+0x826/0xa64 >> Â[<c0442d04>] ? vprintk+0x35e/0x3a5 >> Â[<c0406b5c>] ? xen_restore_fl+0x2f/0x58 >> Â[<c0a255f9>] start_kernel+0xbc/0x38d >> Â[<c0a250af>] i386_start_kernel+0x9e/0xa5 >> Â[<c0a28571>] xen_start_kernel+0x5b7/0x5bf >> Â[<c04090a9>] ? signal_fault+0x45/0x92 >> ------------[ cut here ]------------ >> WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x1ec/0x1f4() >> Hardware name: OptiPlex GX620 >> Modules linked in: >> Pid: 0, comm: swapper Tainted: G    ÂW Â2.6.32.16 #2 >> Call Trace: >> Â[<c0442140>] warn_slowpath_common+0x65/0x7c >> Â[<c040467f>] ? xen_mc_flush+0x1ec/0x1f4 >> Â[<c0442164>] warn_slowpath_null+0xd/0x10 >> Â[<c040467f>] xen_mc_flush+0x1ec/0x1f4 >> Â[<c040530a>] xen_mc_issue+0x14/0x23 >> Â[<c04063fa>] xen_set_pmd_hyper+0x7c/0xa3 >> Â[<c042b8bb>] set_pmd_pfn+0xb3/0xc4 >> Â[<c0a3c6c9>] initmem_init+0x4db/0x5f6 >> Â[<c0a326e6>] ? __acpi_unmap_table+0x10/0x12 >> Â[<c0a4da08>] ? acpi_table_parse_madt+0x16/0x18 >> Â[<c0a3180e>] ? acpi_parse_lapic_addr_ovr+0x0/0x30 >> Â[<c0a2b0e2>] setup_arch+0x826/0xa64 >> Â[<c0442d04>] ? vprintk+0x35e/0x3a5 >> Â[<c0406b5c>] ? xen_restore_fl+0x2f/0x58 >> Â[<c0a255f9>] start_kernel+0xbc/0x38d >> Â[<c0a250af>] i386_start_kernel+0x9e/0xa5 >> Â[<c0a28571>] xen_start_kernel+0x5b7/0x5bf >> Â[<c04090a9>] ? signal_fault+0x45/0x92 >> ---[ end trace a7919e7f17c0a727 ]--- >> 1 multicall(s) failed: cpu 0 >> Pid: 0, comm: swapper Tainted: G    ÂW Â2.6.32.16 #2 >> Call Trace: >> Â[<c07b4cdf>] ? printk+0xf/0x18 >> Â[<c04045ca>] xen_mc_flush+0x137/0x1f4 >> Â[<c040530a>] xen_mc_issue+0x14/0x23 >> Â[<c04063fa>] xen_set_pmd_hyper+0x7c/0xa3 >> Â[<c042b8bb>] set_pmd_pfn+0xb3/0xc4 >> Â[<c0a3c6c9>] initmem_init+0x4db/0x5f6 >> Â[<c0a326e6>] ? __acpi_unmap_table+0x10/0x12 >> Â[<c0a4da08>] ? acpi_table_parse_madt+0x16/0x18 >> Â[<c0a3180e>] ? acpi_parse_lapic_addr_ovr+0x0/0x30 >> Â[<c0a2b0e2>] setup_arch+0x826/0xa64 >> Â[<c0442d04>] ? vprintk+0x35e/0x3a5 >> Â[<c0406b5c>] ? xen_restore_fl+0x2f/0x58 >> Â[<c0a255f9>] start_kernel+0xbc/0x38d >> Â[<c0a250af>] i386_start_kernel+0x9e/0xa5 >> Â[<c0a28571>] xen_start_kernel+0x5b7/0x5bf >> Â[<c04090a9>] ? signal_fault+0x45/0x92 >> ------------[ cut here ]------------ >> WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x1ec/0x1f4() >> Hardware name: OptiPlex GX620 >> Modules linked in: >> Pid: 0, comm: swapper Tainted: G    ÂW Â2.6.32.16 #2 >> Call Trace: >> Â[<c0442140>] warn_slowpath_common+0x65/0x7c >> Â[<c040467f>] ? xen_mc_flush+0x1ec/0x1f4 >> Â[<c0442164>] warn_slowpath_null+0xd/0x10 >> Â[<c040467f>] xen_mc_flush+0x1ec/0x1f4 >> Â[<c040530a>] xen_mc_issue+0x14/0x23 >> Â[<c04063fa>] xen_set_pmd_hyper+0x7c/0xa3 >> Â[<c042b8bb>] set_pmd_pfn+0xb3/0xc4 >> Â[<c0a3c6c9>] initmem_init+0x4db/0x5f6 >> Â[<c0a326e6>] ? __acpi_unmap_table+0x10/0x12 >> Â[<c0a4da08>] ? acpi_table_parse_madt+0x16/0x18 >> Â[<c0a3180e>] ? acpi_parse_lapic_addr_ovr+0x0/0x30 >> Â[<c0a2b0e2>] setup_arch+0x826/0xa64 >> Â[<c0442d04>] ? vprintk+0x35e/0x3a5 >> Â[<c0406b5c>] ? xen_restore_fl+0x2f/0x58 >> Â[<c0a255f9>] start_kernel+0xbc/0x38d >> Â[<c0a250af>] i386_start_kernel+0x9e/0xa5 >> Â[<c0a28571>] xen_start_kernel+0x5b7/0x5bf >> Â[<c04090a9>] ? signal_fault+0x45/0x92 >> ---[ end trace a7919e7f17c0a728 ]--- >> 1 multicall(s) failed: cpu 0 >> Pid: 0, comm: swapper Tainted: G    ÂW Â2.6.32.16 #2 >> Call Trace: >> Â[<c07b4cdf>] ? printk+0xf/0x18 >> Â[<c04045ca>] xen_mc_flush+0x137/0x1f4 >> Â[<c040530a>] xen_mc_issue+0x14/0x23 >> Â[<c04063fa>] xen_set_pmd_hyper+0x7c/0xa3 >> Â[<c042b8bb>] set_pmd_pfn+0xb3/0xc4 >> Â[<c0a3c6c9>] initmem_init+0x4db/0x5f6 >> Â[<c0a326e6>] ? __acpi_unmap_table+0x10/0x12 >> Â[<c0a4da08>] ? acpi_table_parse_madt+0x16/0x18 >> Â[<c0a3180e>] ? acpi_parse_lapic_addr_ovr+0x0/0x30 >> Â[<c0a2b0e2>] setup_arch+0x826/0xa64 >> Â[<c0442d04>] ? vprintk+0x35e/0x3a5 >> Â[<c0406b5c>] ? xen_restore_fl+0x2f/0x58 >> Â[<c0a255f9>] start_kernel+0xbc/0x38d >> Â[<c0a250af>] i386_start_kernel+0x9e/0xa5 >> Â[<c0a28571>] xen_start_kernel+0x5b7/0x5bf >> Â[<c04090a9>] ? signal_fault+0x45/0x92 >> ------------[ cut here ]------------ >> WARNING: at arch/x86/xen/multicalls.c:182 xen_mc_flush+0x1ec/0x1f4() >> Hardware name: OptiPlex GX620 >> Modules linked in: >> Pid: 0, comm: swapper Tainted: G    ÂW Â2.6.32.16 #2 >> Call Trace: >> Â[<c0442140>] warn_slowpath_common+0x65/0x7c >> Â[<c040467f>] ? xen_mc_flush+0x1ec/0x1f4 >> Â[<c0442164>] warn_slowpath_null+0xd/0x10 >> Â[<c040467f>] xen_mc_flush+0x1ec/0x1f4 >> Â[<c040530a>] xen_mc_issue+0x14/0x23 >> Â[<c04063fa>] xen_set_pmd_hyper+0x7c/0xa3 >> Â[<c042b8bb>] set_pmd_pfn+0xb3/0xc4 >> Â[<c0a3c6c9>] initmem_init+0x4db/0x5f6 >> Â[<c0a326e6>] ? __acpi_unmap_table+0x10/0x12 >> Â[<c0a4da08>] ? acpi_table_parse_madt+0x16/0x18 >> Â[<c0a3180e>] ? acpi_parse_lapic_addr_ovr+0x0/0x30 >> Â[<c0a2b0e2>] setup_arch+0x826/0xa64 >> Â[<c0442d04>] ? vprintk+0x35e/0x3a5 >> Â[<c0406b5c>] ? xen_restore_fl+0x2f/0x58 >> Â[<c0a255f9>] start_kernel+0xbc/0x38d >> Â[<c0a250af>] i386_start_kernel+0x9e/0xa5 >> Â[<c0a28571>] xen_start_kernel+0x5b7/0x5bf >> Â[<c04090a9>] ? signal_fault+0x45/0x92 >> ---[ end trace a7919e7f17c0a729 ]--- >>  mapped low ram: 0 - 2cdfe000 >>  low ram: 0 - 2cdfe000 >>  node 0 low ram: 00000000 - 2cdfe000 >>  node 0 bootmap 00007000 - 0000c9c0 >> (12 early reservations) ==> Âbootmem [0000000000 - 002cdfe000] >>  #0 [0000000000 - 0000001000]  BIOS data page ==> Â[0000000000 - >> 0000001000] >>  #1 [00023ba000 - 00023d3000]  XEN PAGETABLES ==> Â[00023ba000 - >> 00023d3000] >>  #2 [0000001000 - 0000002000]  ÂEX TRAMPOLINE ==> Â[0000001000 - >> 0000002000] >>  #3 [0000006000 - 0000007000]    TRAMPOLINE ==> Â[0000006000 - >> 0000007000] >>  #4 [0000400000 - 0000b83dd8]  ÂTEXT DATA BSS ==> Â[0000400000 - >> 0000b83dd8] >>  #5 [0000ca9000 - 00022b9000]     ÂRAMDISK ==> Â[0000ca9000 - >> 00022b9000] >>  #6 [00022b9000 - 00023ba000]  XEN START INFO ==> Â[00022b9000 - >> 00023ba000] >>  #7 [0000b84000 - 0000b841cc]       ÂBRK ==> Â[0000b84000 - >> 0000b841cc] >>  #8 [0000100000 - 0000252000]     ÂPGTABLE ==> Â[0000100000 - >> 0000252000] >>  #9 [003f600000 - 0040000000]     ÂKVA RAM >>  #10 [002c200000 - 002cc00000]      KVA PG ==> Â[002c200000 - >> 002cc00000] >>  #11 [0000007000 - 000000d000]     ÂBOOTMAP ==> Â[0000007000 - >> 000000d000] >> found SMP MP-table at [c00fe710] fe710 >> Zone PFN ranges: >>  DMA   Â0x00000000 -> Â0x00001000 >>  Normal  0x00001000 -> Â0x0002cdfe >>  HighMem Â0x0002cdfe -> Â0x00040000 >> Movable zone start PFN for each node >> early_node_map[2] active PFN ranges >>   0: 0x00000000 -> Â0x000000a0 >>   0: 0x00000100 -> Â0x0003f600 >> Using APIC driver default >> ACPI: PM-Timer IO Port: 0x808 >> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) >> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) >> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled) >> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled) >> ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) >> ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) >> IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-0 >> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >> ERROR: Unable to locate IOAPIC for GSI 2 >> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) >> ERROR: Unable to locate IOAPIC for GSI 9 >> Using ACPI (MADT) for SMP configuration information >> ACPI: HPET id: 0x8086a201 base: 0xfed00000 >> SMP: Allowing 2 CPUs, 0 hotplug CPUs >> PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 >> Allocating PCI resources starting at 80000000 (gap: 80000000:70000000) >> Booting paravirtualized kernel on Xen >> Xen version: 4.0.1-rc5-pre (preserve-AD) (dom0) >> NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:8 >> PERCPU: Embedded 15 pages/cpu @c23db000 s38264 r0 d23176 u65536 >> pcpu-alloc: s38264 r0 d23176 u65536 alloc=16*4096 >> pcpu-alloc: [0] 0 [0] 1 >> Xen: using vcpu_info placement >> Built 1 zonelists in Zone order, mobility grouping on. ÂTotal pages: >> 257459 >> Policy zone: HighMem >> Kernel command line: ro root=UUID=4f54a506-cd89-4abd-810b-c2a326982413 >> console=hvc0 earlyprintk=xen nomodeset >> PID hash table entries: 4096 (order: 2, 16384 bytes) >> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) >> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) >> Enabling fast FPU save and restore... done. >> Enabling unmasked SIMD FPU exception support... done. >> Initializing CPU#0 >> allocated 5191680 bytes of page_cgroup >> please try 'cgroup_disable=memory' option if you don't want memory cgroups >> DMA: Placing 64MB software IO TLB between c29b3000 - c69b3000 >> DMA: software IO TLB at phys 0x29b3000 - 0x69b3000 >> xen_swiotlb_fixup: buf=c29b3000 size=67108864 >> xen_swiotlb_fixup: buf=c6a13000 size=32768 >> Initializing HighMem for node 0 (0002cdfe:0003f600) >> Memory: 922944k/1048576k available (3819k kernel code, 115004k >> reserved, 2471k data, 484k init, 303112k highmem) >> virtual kernel memory layout: >>   fixmap Â: 0xf52d5000 - 0xf57ff000  (5288 kB) >>   pkmap  : 0xf4e00000 - 0xf5000000  (2048 kB) >>   vmalloc : 0xed5fe000 - 0xf4dfe000  ( 120 MB) >>   lowmem Â: 0xc0000000 - 0xecdfe000  ( 717 MB) >>    .init : 0xc0a25000 - 0xc0a9e000  ( 484 kB) >>    .data : 0xc07baea2 - 0xc0a24ea0  (2471 kB) >>    .text : 0xc0400000 - 0xc07baea2  (3819 kB) >> SLUB: Genslabs=14, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=8 >> Hierarchical RCU implementation. >> NR_IRQS:1536 >> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) >> xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=1 >> xen_allocate_pirq: returning irq 9 for gsi 9 >> xen: acpi sci 9 >> Console: colour VGA+ 80x25 >> console [hvc0] enabled, bootconsole disabled >> >> console [hvc0] enabled, bootconsole disabled >> installing Xen timer for CPU 0 >> >> Detected 3391.772 MHz processor. >> >> Calibrating delay loop (skipped), value calculated using timer >> frequency.. 6783.54 BogoMIPS (lpj=3391772) >> >> Security Framework initialized >> >> SELinux: ÂInitializing. >> >> Mount-cache hash table entries: 512 >> >> Initializing cgroup subsys debug >> >> Initializing cgroup subsys ns >> >> Initializing cgroup subsys cpuacct >> >> Initializing cgroup subsys memory >> >> Initializing cgroup subsys devices >> >> Initializing cgroup subsys freezer >> >> Initializing cgroup subsys net_cls >> >> CPU: Trace cache: 12K uops, L1 D cache: 16K >> >> CPU: L2 cache: 2048K >> >> CPU: Physical Processor ID: 0 >> >> CPU: Processor Core ID: 0 >> >> mce: CPU supports 4 MCE banks >> >> Performance Events: no PMU driver, software events only. >> >> SMP alternatives: switching to UP code >> >> ACPI: Core revision 20090903 >> >> installing Xen timer for CPU 1 >> >> SMP alternatives: switching to SMP code >> >> Initializing CPU#1 >> >> CPU: Trace cache: 12K uops, L1 D cache: 16K >> >> CPU: L2 cache: 2048K >> >> CPU: Physical Processor ID: 0 >> >> CPU: Processor Core ID: 1 >> >> Brought up 2 CPUs >> >> BUG: unable to handle kernel NULL pointer dereference at (null) >> >> IP: [<c0436583>] cpu_attach_domain+0x54/0x159 >> >> *pdpt = 0000000000aa4001 *pde = 0000000000000000 >> >> Oops: 0000 [#1] PREEMPT SMP >> >> last sysfs file: >> >> Modules linked in: >> >> >> >> Pid: 1, comm: swapper Tainted: G    ÂW Â(2.6.32.16 #2) OptiPlex >> GX620 >> >> EIP: 0061:[<c0436583>] EFLAGS: 00010206 CPU: 0 >> >> EIP is at cpu_attach_domain+0x54/0x159 >> >> EAX: 0000042f EBX: c23df358 ECX: 00000000 EDX: c23df548 >> >> ESI: c23e4000 EDI: c23df640 EBP: ebc4ff50 ESP: ebc4ff2c >> >> ÂDS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: e021 >> >> Process swapper (pid: 1, ti=ebc4e000 task=ebc50000 task.ti=ebc4e000) >> >> Stack: >> >> Âc23df548 ebc98000 0000042f 00000000 0000102f ebc18060 ebc18060 00000000 >> >> <0> Âc0a98358 ebc4ffac c043a021 00000000 c23ef728 c0a98640 c0a9872c >> 00000020 >> >> <0> Â00000000 00000001 ebc4ffa4 00000000 00000008 00000000 00000002 >> 00000002 >> >> Call Trace: >> >> Â[<c043a021>] ? __build_sched_domains+0x637/0x689 >> >> Â[<c0a3d168>] ? sched_init_smp+0xa7/0x148 >> >> Â[<c0a252e8>] ? kernel_init+0xd3/0x164 >> >> Â[<c0a25215>] ? kernel_init+0x0/0x164 >> >> Â[<c040aaa7>] ? kernel_thread_helper+0x7/0x10 >> >> Code: 38 89 45 ec 8b 47 38 89 45 e4 8b 87 e8 00 00 00 89 55 dc e8 18 >> 15 19 00 8b 55 dc 48 74 4a 8b 47 38 a9 8f 02 00 00 74 0b 8b 4f 08<3b> >> 09 0f 85 ca 00 00 00 a8 20 0f 85 c2 00 00 00 eb 2b 8b 4f 08 >> >> EIP: [<c0436583>] cpu_attach_domain+0x54/0x159 SS:ESP e021:ebc4ff2c >> >> CR2: 0000000000000000 >> >> ---[ end trace a7919e7f17c0a72a ]--- >> >> Kernel panic - not syncing: Attempted to kill init! >> >> Pid: 1, comm: swapper Tainted: G   ÂD W Â2.6.32.16 #2 >> >> Call Trace: >> >> Â[<c07b4cdf>] ? printk+0xf/0x18 >> >> Â[<c07b4c27>] panic+0x43/0xec >> >> Â[<c0445765>] do_exit+0x5c/0x5dd >> >> Â[<c07b4cdf>] ? printk+0xf/0x18 >> >> Â[<c07b798e>] oops_end+0x99/0xa1 >> >> Â[<c042793b>] no_context+0x136/0x140 >> >> Â[<c0427a2c>] __bad_area_nosemaphore+0xe7/0xef >> >> Â[<c07b8a3f>] ? do_page_fault+0x0/0x2a8 >> >> Â[<c0427a41>] bad_area_nosemaphore+0xd/0x10 >> >> Â[<c07b8b86>] do_page_fault+0x147/0x2a8 >> >> Â[<c07b8a3f>] ? do_page_fault+0x0/0x2a8 >> >> Â[<c07b705b>] error_code+0x73/0x78 >> >> Â[<c043007b>] ? ftrace_define_fields_sched_switch+0x10/0xfc >> >> Â[<c0436583>] ? cpu_attach_domain+0x54/0x159 >> >> Â[<c043a021>] __build_sched_domains+0x637/0x689 >> >> Â[<c0a3d168>] sched_init_smp+0xa7/0x148 >> >> Â[<c0a252e8>] kernel_init+0xd3/0x164 >> >> Â[<c0a25215>] ? kernel_init+0x0/0x164 >> >> Â[<c040aaa7>] kernel_thread_helper+0x7/0x10 >> > > _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |