Thanks Konrad for your help. I tried your suggestion but see below:
Please let me know next steps..
grub entry:
title Xen 4.0 debug XenLinux 2.6
root (hd0,1)
kernel /boot/xen-4.0.0.gz noreboot
dom0_mem=max:1G loglvl=all com1=38400,8n1 console=com1 iommu=off guest_loglvl=all
module /boot/vmlinuz-2.6.32.13 ro root=/dev/sda2 console=hvc0 earlyprintk=xen nomodeset debug loglevel=10
module /boot/initrd-2.6.32.13.img
(XEN) ACPI: FACP BF7B8A88, 00F4 (r3 HPQOEM TYLSBURG 1 0)EN) ACPI: ACPI
SLEEP INFO: pm1x_cnt[f804,460], pm1x_evt[f800,0]
(XEN) ACPI: DSDT BF7B92D7, A73D (r1 COMPAQ DSDT_PRJ 1 MSFT 100000E) wakeup_vec[bf7b880c], vec_size[20]
(XEN) ACPI: FACS BF7B8800, 0040EN) ACPI: Local APIC address 0x
(XEN) ACPI: APIC
BF7B8B7C, 0114 (r1 HPQOEM TYLSBURG 1 0)[0x01] lapic_id[0x00] enabled)
(XEN) ACPI: ASF! BF7B8C90, 0063 (r32 HPQOEM TYLSBURG 1 0)
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
(XEN) ACPI: MCFG BF7B8CF3, 003C (r1 HPQOEM TYLSBURG 1 0)PIC
version 21
(XEN) ACPI: LAPIC (ac
(XEN) ACPI: TCPA BF7B8D2F, 0032 (r1 HPQOEM TYLSBURG 1 0)
(XEN) Processor #4 7:10 APIC version 21
(XEN) ACPI: DMAR BF7B8F0F, 01B8 (r1 HPQOEM TYLSBURG 1
0)
(XEN) ACPI: LAPIC (acpi_id[0x0
(XEN) ACPI: SSDT BF7C4EE6, 11FC (r1 INTEL PPM RCM 80000001 INTL 20061109)
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
(XEN) No NUMA configuration found
(XEN) ACPI: LAPIC
(XEN) Faking a node at 0000000000000000-00000000bf7a5000
(XEN) ACPI: LAPI
(XEN) Domain heap initialised] disabled)
(XEN) found SMP MP-table at 000f9bf0
(XEN) ACPI: LAPIC (acpi_id[0x0b]
(XEN) DMI 2.6 present.)
(XEN) Using APIC driver default
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
(XEN) ACPI: LAPIC_NMI (acpi_
(XEN) Processor #2 7:10 APIC version
21
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)nt[0x1])
(XEN) Processor #4 7:10 APIC version 21[0x04] high edge lint[
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)MI (acpi_id[0x07] high edge lint[0x1])
(XEN) ACPI:
LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)MI (acpi_id[0x08] high edge lint[0x1])
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)(id[0x01] address[0xfec00000] gsi_base[0])
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)C[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x00] disabled)
(XEN) ACPI: IOAPIC (id[0x02] address[0xfec1000
(XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x00] disabled)
(XEN) IOAPIC[1]: apic_id 2, version
(XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x00]
disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x00] disabled)NT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x00] disabled)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
(XEN) ACPI: IRQ9 used by overri
(XEN) ACPI: LAPIC_NMI
(acpi_id[0x02] high edge lint[0x1])mode: Flat. Using 3 I/O APICs
(XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])base: 0xfed00000
(XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0 se
(XEN) ACPI: LAPIC_NMI (acpi_id[0x06] high edge
lint[0x1])
(XEN) Using sch
(XEN) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
(XEN) Detected 2266.814 M
(XEN) ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])Initing memory sharing.
(XEN
(XEN) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
(XEN) - APIC MMIO
access virtualisation
(XEN) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
(XEN) - Extended Page Tables (EPT)
(XEN) ACPI: IOAPIC (id[0x02] address[0xfec10000] gsi_base[24])
(XEN) - Virtual N
(XEN) IOAPIC[1]: apic_id 2, version 32, address 0xfec10000, GSI 24-47
(XEN) HVM: ASIDs
enabled.
(XEN) TSC is reliable, synchroniz
(XEN) ACPI: IRQ2 used by override.
(
(XEN) ACPI: IRQ9 used by override.ET
(XEN) Enabling APIC mode: Flat. Using 3 I/O APICs
(XEN) microcode
(XEN) ACPI: HPET id: 0x8086a301
base: 0xfed00000
(XEN) mic
(XEN) PCI: MCFG configuration 0: base f0000000 se
(XEN) *** LOADING DOMAIN 0 ***
(XEN) - APIC MMIO access virtualisationernel: 64-bit, lsb, compat32
(XEN) - APIC TPR shadow
(XEN) Dom0 kernel:
(XEN) - Extended Page Tables (EPT)>
0x2768000
(XEN) - Virtual-Processor Identifiers (VPID)N) PHYSICAL MEMORY ARRANGEMENT:
(XEN) - Virtual NMI(XEN) Dom0 alloc.:
(XEN) - MSR direct-access bitmap00 (725348 pages to be all
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabl
ocated)
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK
method
(XEN) Phys
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1dfdd
(XEN) TSC is reliable, synchronization unnecessaryN) Start info: ffffffff831c8000->ffffffff831c8
(XEN) Platform timer is 14.318MHz HPET
üHòÆõ ÿþüiþ
ÿ(XEN) Allocated console ring of 32 KiB.
(XEN) Page tables:
ffffffff831c9000-
(XEN) microcode.c:73:d32767 microcode: CPU1 resumed
\ \/ /___ _ __ | || | / _
(XEN) microcode.c:73:d32767 microcode: CPU2 resumed
(XEN) ACPI sleep modes: S3f81a63200
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) Dom0 has maximum 4 VCPUs
(XEN) *** LOADING DOMAIN 0 ***XEN) Freed 156kB init memory.
(XEN) Xen kernel: 64-bit, lsb, compat32 kernel into physical memoryfer time: 1 s
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x2768000etup ISA identity maps
(XEN) Disc info
(XEN) PHYSICAL MEMORY ARRANGEMENT:d...
(XEN)
(XEN) Dom0 alloc.: 00000000b4000000->00000000b8000000 (725348 pages to be all
(XEN) Found 1 EDD info
Initializing cgroup
s
ocated)
(XEN)
(XEN) Phys-Mach map: ffffffff82c1f000->ffffffff831c7b20fsdffsfsfsfsfsdfdd
Xen: 0000000000095800 - 0000000000100000 (reserved)
hello fsdffsf
(XEN) Start info: ffffffff831c8000->ffffffff831c84b4fdd
Xen: 0000000000100000 - 00000000
üHòÆõ ÿþüiþ¿¯óÅÿçü __ __ (r2 HPQOEM)
(XEN) Page tables: ffffffff831c9000->ffffffff831e6000
Xen: 00000000bf7a5800 -
00000000c0000000 (reserved)PQ
\ \/ /___ _ __ | || | / _ 0)
/_/\_\___|_| |_| |_|(_)7010600070106
(XEN) ENTRY ADDRESS: ffffffff81a63200
(XE
initial memory mapped
(XEN) Xen version 4.0.0 (sun 1 0)
(XEN) Dom0 has maximum 4 VCPUs
(XEN) Freed 156kB init
memory.00000000000-00000000b5164000
(X
mapping kernel into physical memoryfer time: 1 secondsCPI: MCFG BF7B8CF3, 003C
Xen: setup ISA identity mapsge 4k 0)
(XEN) Disc info
k
about to get started...les up to b5164000 @ 10
(XEN) Found 1: TCPA BF7B8D2
Initializing cgroup subsys cpuset 1
(XEN) Found 1 EDD
info
Initializing cgroup s
Xen: 0000000000000000 - 0000000000095800 (usable)0000000)
(XEN) 00000000fed45000 - 0000000100000000 (rG 00000000bf7b8cf3 0003C (v01 HPQOEM TYLSBURG
Xen: 0000000000095800 - 0000000000100000
(reserved)
AC
(XEN) System RAM: 3033MB (3106320kB)HPQOEM TYLSBURG 00000001 000000
Xen: 0000000000100000 - 00000000b5164000 (usable)9010, 0024 (r2 HPQOEM)
ACPI: SLIC 00000000bf7b8d61 00176 (v01 HPQOEM SLIC-WKS 00000001
Xen: 00000000bf7a5800 - 00000000c0000000 (reserved)PQOEM SLIC-WKS 20091208 0)
ACPI: HPET 00000000bf7b8ed7 00038 (v01 HPQOEM
TYLS
x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106: Local APIC address 0xfee00000APIC address 0xfee00000
(XE
No
initial memory mapped : 0 - 20000000OEM TYLSBURG 1 0)0000000000000-00000000b5164000
(XEN)
init_memory_mapping: 0000000000000000-00000000b5164000b5164000
(XEN) ACPI: LAPIC
(acpi_id[0x02] la
(XEN) ACPI: MCFG BF7B8CF3, 003C008000 - 000000000001ffff]
0000000000 - 00b5164000 page 4k 0)
bootmap [0000000000020000 - 000000000
kernel direct mapping tables up to b5164000 @ 100000-6ad000ACPI: TCPA BF7B8D2F, 0032 (r1 HPQOEM TYLSBURG 10000000 - 00b5164000]or #4 7:10 APIC version 21
ACPI: MCFG 00000000bf7b8cf3 0003C (v01 HPQOEM TYLSBURG 00000001 00000000)002747680] ACPI: LAPIC
(acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: TCPA 00000000bf7b8d2f 00032 (v01 HPQOEM TYLSBURG 00000001 00000000)2c1ec00]0] disabled)
ACPI: SLIC 00000000bf7b8d61 00176 (v01 HPQOEM SLIC-WKS 00000001 00000000)c9000]
(XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[
ACPI: HPET 00000000bf7b8ed7 00038
(v01 HPQOEM TYLSRK
No NUMA configuration found
(XEN) ACPI: LAPIC (acpi_i
Faking a node at 0000000000000000-00000000b51640000] lapic_id[0x00] disabled)
(XEN) Process
Bootmem setup node 0 0000000000000000-00000000b5164000I (acpi_id
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0
NODE_DATA [0000000000008000 - 000000000001ffff]I: LAPIC_NMI (acpi_
(XEN) Processor #2 7:10 APIC
bootmap [0000000000020000 - 0000000000036a2f] pages 17PI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)nt[0x1])
(8 early reservations) ==> bootmem [0000000000 - 00b5164000]or #4 7:10 APIC version 21[0x04] high edge
lint[
#3 [0001000000 - 0002747680] TEXT DATA BSS ==> [0001000000 - 0002747680] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)C[0]: apic_id 1, version
#4 [0002768000 - 0002c1ec00] RAMDISK ==> [0002768000 - 0002c1ec00]0] disabled)
(XEN) ACPI: IOAPIC (id[0x02] address[0xfec1000
(XEN) A
#5 [0002c1f000 - 00031c9000] XEN START INFO ==> [0002c1f000 - 00031c9000]OAPIC[1]: apic_id 2, version
(XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x00]
#6 [0002748000 - 0002748120] BRK
(XEN) ACPI:
/_/\_\___|_| |_| |_|(_)___(_)___/
(XEN) ACPI: LAPIC_NMI (acpi_id[0
(XEN) Xen version 4.0.0 (@) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-44
(XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])mode: Flat. Using 3
)) Tue Jun 8 15:44:03 PDT 2010
(XEN) ACPI: LAPIC_NMI (acpi
(XEN) Latest ChangeSet: unavailable0xfed00000
(XEN) Command line: noreboot dom0_mem=max:1G loglvl=all com1ge lint[0
se
(XEN) Found 1 MBR signatureshigh edge lint[0x1])Initing m
(XEN) Found 1 EDD information structures
(XEN
(XEN) ACPI: IOAPIC (id[0x01] addre
(XEN) Xen-e820 RAM map:0])
(XEN)
(XEN) 0000000000000000 - 0000000000095800 (usable)IC[0]: apic_id 1, version 32, address 0xfec00000, G
(XEN) 0000000000095800 - 00000000000a0000 (reserved))
(XEN) ACPI: IOAPIC (id[0x02] ad
(XEN) 00000000000e8000 - 0000000000100000
(reserved)
(XEN) - Virtual N
(XEN) IOAPIC[
(XEN) 0000000000100000 - 00000000bf7a5800 (usable)4-47
(XEN) HVM: ASIDs enabled.
(XEN) 00000000bf7a5800 - 00000
(XEN) ACPI: APIC BF7B8B7C, 0114 (r1 HPQOEM TYLSBURG 1 0)microcode: CPU3 resumed
(XEN) Using ACPI (MADT) for SMP configuration infor
(XEN) ACPI: ASF! BF7B8C90, 0063 (r32 HPQOEM TYLSBURG
1 0)cheduler: SMP Credit Scheduler (credit)ast
(XEN) ACPI: MCFG BF7B8CF3, 003C (r1 HPQOEM TYLSBURG 1 0)
(XEN)
(XEN) Initing memory sharing.ling timer started.
(XEN) ACPI: TCPA BF7B8D2F, 0032 (r1 HPQOEM TYLSBURG 1 0)
(XEN) - APIC MMIO access virtualisationernel: 64-bit, lsb, compat32
(XEN) ACPI: SLIC BF7B8D61,
0176 (r1 HPQOEM SLIC-WKS 1 0) Page Tables (EPT)> 0x2768000
(XEN) - Virtual-Proc
(XEN) ACPI: HPET BF7B8ED7, 0038 (r1 HPQOEM TYLSBURG 1 0) - Virtual NMI(XEN) Dom0 alloc.:
(XEN) - MSR direct-access bitmap00 (725
(XEN) ACPI: DMAR BF7B8F0F, 01B8 (r1 HPQOEM TYLSBURG
(XEN) HVM: VMX enabl
ocated)
(XEN) ..TIMER: vector=0x
(XEN) DMI 2.6 present.=-1
pin2=-1
(XEN) Using APIC driver default ffffffff831c9
(XEN) TSC is re
(XEN) ACPI: PM-Timer IO Port: 0xf808
(XEN) Boot
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[f804,460], pm1x_evt[f800,0]
ÿ(XEN) Allocated console ring of 32 KiB.f
(XEN) ACPI: wakeup_vec[bf7b880c], vec_size[20]767 microcode: CPU1 resumedENTRY ADDRESS: ffffffff81a63200
(XEN) ACPI: Local APIC address 0xfee000007 microcode: CPU2
resumed
(XEN) Xen ke
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)Initializin
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr
(XEN) Processor #6 7:10 APIC version 21u
Linux v
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)080704 (Red Hat
(XEN) Dom0 alloc.: 00000000b40000
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)Thu May 20 17:22:39 PDT 2010
(XEN) Phys-Mach map: ffffffff82c1f000->ffffffff831
(XEN)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x00] disabled)
(XEN) Start info: ffffffff831c8000->ffffffff831c8
(XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x00] disabled)
(XEN) Page tables: ffffffff831c9000->ffffffff831e600
(XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x00] disabled)(XEN) Boot stack: ffffffff831e6000->ffffffff831e70000
(XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x00] disabled)EN) TOTAL: ffffffff80000000->ffffffff83400000580
(XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x00] disabled)) ENTRY ADDRESS: ffffffff81a63200000000f0000000 - 000000
(XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x00] disa
ma
(XEN) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
initial
Xen: setup ISA identity maps
(XEN) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])Initializing cgroup subsys cpuset
(XEN) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
Linux version 2.6.32.13 (root@host)
(XEN) ACPI: LAPIC_NMI (acpi_id[0x07] high edge
lint[0x1])
RAMDISK: 02768000 - 02c1ec00
(XEN) ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0024 (v02 HP
Xen: 00000000fed45000 - 0000000
(XEN) ACPI: IRQ9 used by override.0000bf7b8d61 00176 (v01 HPQOEM SLI
(XEN) Enabling APIC mode: Flat. Using 3 I/O APICs
DMI 2.6 present.
last_
(XEN) ACPI: HPET id: 0x8086a301 base: 0xfed00000M TYLSBURG 00000001
00000000)
x86 PAT ena
(XEN) PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127 00000000bf7b8f0f 001B8 (v01 HPQOEM TY
initial memory mapped : 0 -
(XEN) PCI: MCFG area at f0000000 reserved in E820_memory_mapping: 0000000000000000-00000000b516400
(XEN) Using ACPI (MADT) for SMP configuration information000000000 - 00b5164000 page 4k
(XEN) Using scheduler: SMP Credit Scheduler (credit)00000-6ad000
No NUMA co
(XEN) Detected 2266.801 MHz processor. 02c1ec00ing a node at 00000000000000
(XEN) Initing memory sharing.024 (v02
HP
(XEN) - MSR direct-access bitmap #0 [0000000000 - 0000001
ACPI: F
(XEN) HVM: ASIDs enabled.000 - 0000001000]
(XEN) HVM: VMX enabled00000bf7b8b7c 00114 (v
(XEN) HVM: Hardware Assisted Paging detected.031e6000] XEN PAGETABLES ==> [00031c9000 -
(XEN) Intel machine check reporting enabled00000bf7b8c90 00063 (v32 HPQOEM TYLSBURG 00
(XEN) I/O virtualisation disabled TRAMPOLINE ==> [0000006000 -
(XEN) Total of 4 processors activated.MCFG 00000000bf7b8cf3 0003C (v01 HPQOE
(XEN) ENABLING IO-APIC IRQs00000)02747680] TEXT DAT
(XEN) -> Using new ACK method
ÿ(XEN) Allocated console ring of 32 KiB.7b8ed7 00038 (v01 HPQOEM TYLSBURG 000000
(XEN) microcode.c:73:d32767 microcode: CPU1 resumed
#7
ACPI:
(XEN) microcode.c:73:d32767 microcode: CPU2 resumed0001 00000000)
(XEN) Brought up 4 CPUs _ _ ___ _
(XEN) microcode.c:73:d32767 microcode: CPU3 resumedM 80000001 INTL
20061109)
(XEN) Turbo Mode detected! | || |_| | | | | | |
(XEN) HPET: 4 timers in total, 0 timers will be used for broadcast |_|
No NUMA configuration found
/_/\_\___|_|
Faking
(XEN) ACPI sleep modes: S3-00000000b5164000
(8 early reservations) ==> bootmem [0000000000 - 00b5164000]
(XEN) PHYSICAL MEMORY ARRANGEMENT:
#0 [000000
(XEN) Dom0 alloc.: 00000000b4000000->00000000b8000000 (245760 pages to be allN) VGA is text mode 80x25, font
8x16
#1 [00031c9000 -
ocated)000]
(XEN) VIRTUAL MEMORY ARRANGEMENT:0031e6000]
(XEN) Loaded kernel: ffffffff81000000->ffffffff82768000#2 [0000006000 - 0000008000] TRAMPOLINE ==> [00000
(XEN) Init. ramdisk: ffffffff82768000->ffffffff82c1ec00ructures
#3 [0001000000
(XEN) Phys-Mach map: ffffffff82c1f000->ffffffff800000000000000 -
000
(XEN) 00000000f0000000 - 0
(XEN) ENTRY ADDRESS: ffffffff81a63200d000] PGTABLE ==> [0000100000
(XEN) Dom0 has maximum 4 VCPUs000000fed40000 (reserved)
(XEN) Scrubbing Free RAM: ....................done.N) 00000000fed45000 - 00
\ \/ /___ _ __ | || |
(XEN) Xen trace buffers: disabled
\ // _ \ '_ \
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All | |__ _| |_| | |_| |OE
(XEN) *** Serial input ->
DOM0 (type 'CTRL-a' three times to switch input to Xen HPQOEM SLIC-WKS 20091208
)
(XEN) C
Initializing cgroup subsys cpul com1=38400,8n1 console=com1
Linux version 2.6.32.13 (root@host) (gcc version 4.1.2 20080704 (Red Hat
est_loglvl=all
(XEN) Video information:
(XEN) AC
4.1.2-44)) #2 SMP Thu May 20 17:22:39 PDT 201016 1
0)
(XEN
Command line: ro root=/dev/sda2 console=hvc0 earlyprintk=xen nomodeset debug log (r1 HPQOEM TYLSBURG 1
(XEN) Disc information:
(XE
level=10 1 MBR s
KERNEL supported cpus:(XEN) ACPI: TCP
(XEN)
Intel GenuineIntelion structures 1
AMD AuthenticAMD
bootconsole [xenboot0] enabled
DMI 2.6 present.
last_pfn = 0x40000 max_arch_pfn = 0x400000000
x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106
initial memory mapped : 0 - 20000000
init_memory_mapping:
0000000000000000-0000000040000000
0000000000 - 0040000000 page 4k
kernel direct mapping tables up to 40000000 @ 100000-302000
RAMDISK: 02768000 - 02c1ec00
ACPI: RSDP 00000000000e9010 00024 (v02 HPQOEM)
ACPI: XSDT 00000000bf7b88e8 0006C (v01 HPQOEM SLIC-WKS 20091208 00000000)
ACPI: FACP 00000000bf7b8a88 000F4 (v03 HPQOEM TYLSBURG 00000001 00000000)
ACPI: DSDT 00000000bf7b92d7 0A73D (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E)
ACPI: FACS 00000000bf7b8800 00040
ACPI: APIC 00000000bf7b8b7c 00114 (v01 HPQOEM TYLSBURG 00000001 00000000)
ACPI: ASF! 00000000bf7b8c90 00063 (v32 HPQOEM TYLSBURG 00000001 00000000)
ACPI: MCFG 00000000bf7b8cf3 0003C (v01 HPQOEM TYLSBURG 00000001 00000000)
ACPI: TCPA 00000000bf7b8d2f 00032 (v01 HPQOEM TYLSBURG
00000001 00000000)
ACPI: SLIC 00000000bf7b8d61 00176 (v01 HPQOEM SLIC-WKS 00000001 00000000)
ACPI: HPET 00000000bf7b8ed7 00038 (v01 HPQOEM TYLSBURG 00000001 00000000)
ACPI: 00000000bf7b8f0f 001B8 (v01 HPQOEM TYLSBURG 00000001 00000000)
ACPI: SSDT 00000000bf7c4ee6 011FC (v01 INTEL PPM RCM 80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
No NUMA co
<stuck>
--- On
Tue, 6/15/10, Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx> wrote:
From: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
Subject: Re: [Xen-devel] boot Xen 4.0
To: "ccmail111" <ccmail111@xxxxxxxxx>
Cc: deshantm@xxxxxxxxx, "yingbin wang"
<yingbin.wangyb@xxxxxxxxx>, xen-devel@xxxxxxxxxxxxxxxxxxx
Date: Tuesday, June 15, 2010, 5:26 PM
> Linux version 2.6.32.13 (root@xyz) (gcc version 4.1.2 20080704 (Red Hat0095800 (usable)
> (XEN) 00000
> 4.1.2-44)) #2 SMP Thu May 20 17:22:39 PDT 2010
>
> Xen: 0000000000000000 - 0000000000095800
(usable)
> (XEN) 00000000fed45000 - 0000000100000000 (r
> Xen: 0000000000095800 - 0000000000100000 (reserved)
> (XEN) System RAM: 3033MB (3106320kB)
> Xen: 0000000000100000 - 00000000b5164000 (usable)9010, 0024 (r2 HPQOEM)
> Xen: 00000000bf7a5800 - 00000000c0000000 (reserved)PQOEM SLIC-WKS 20091208 0)
> Xen: 00000000f0000000 - 00000000f8000000 (reserved)
>
> last_pfn = 0xb5164 max_arch_pfn = 0x400000000
> (XEN) ACPI: APIC BF7B8B7C, 01
> x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106
> (XE
> initial memory mapped : 0 - 20000000OEM TYLSBURG
1 0)
> init_memory_mapping: 0000000000000000-00000000b5164000
> (XEN) ACPI: MCFG BF7B8CF3, 003C
> 0000000000 - 00b5164000 page 4k 0)
> kernel direct mapping tables up to b5164000 @ 100000-6ad000ACPI: TCPA BF7B8D2F, 0032 (r1 HPQOEM TYLSBURG 1
> RAMDISK: 02768000 - 02c1ec00
> ACPI: FACS 00000000bf7b8800 00040
> ACPI: APIC
00000000bf7b8b7c 00114 (v01 HPQOEM TYLSBURG 00000001 00000000)
> ACPI: ASF! 00000000bf7b8c90 00063 (v32 HPQOEM TYLSBURG 00000001 00000000)
> ACPI: MCFG 00000000bf7b8cf3 0003C (v01 HPQOEM TYLSBURG 00000001 00000000)
> ACPI: TCPA 00000000bf7b8d2f 00032 (v01 HPQOEM TYLSBURG 00000001 00000000)
> ACPI: SLIC 00000000bf7b8d61 00176 (v01 HPQOEM SLIC-WKS 00000001 00000000)
> ACPI: HPET 00000000bf7b8ed7 00038 (v01 HPQOEM TYLSBURG 00000001 00000000)
> ACPI: 00000000bf7b8f0f 001B8 (v01 HPQOEM TYLSBURG 00000001 00000000)
> ACPI: SSDT 00000000bf7c4ee6 011FC (v01 INTEL PPM RCM 80000001 INTL 20061109)
> ACPI: Local APIC address 0xfee00000
> No NUMA configuration
found
> Faking a node at 0000000000000000-00000000b5164000
> Bootmem setup node 0 0000000000000000-00000000b5164000
> NODE_DATA [0000000000008000 - 000000000001ffff]
> bootmap [0000000000020000 - 0000000000036a2f] pages 17
> (8 early reservations) ==> bootmem [0000000000 - 00b5164000]
> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
> #1 [00031c9000 - 00031e6000] XEN PAGETABLES ==> [00031c9000 - 00031e6000]
> #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
> #3 [0001000000 - 0002747680] TEXT DATA BSS ==> [0001000000 - 0002747680]
> #4 [0002768000 - 0002c1ec00] RAMDISK ==> [0002768000 - 0002c1ec00]
> #5 [0002c1f000 -
00031c9000] XEN START INFO ==> [0002c1f000 - 00031c9000]
> #6 [0002748000 - 0002748120] BRK ==> [0002748000 - 0002748120]
> #7 [0000100000 - 000068d000] PGTABLE ==> [0000100000
>
>
This points to the E820 being wacked, but I can't see how that is
possible considering Xen boots. Try forcing your domain to a smaller
memory amount. Use 'dom0_mem=max:1G' in your Xen command line.
