[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32.12 (root@grp-01-23-02) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #2 SMP Thu May 6 14:59:13 EDT 2010 [ 0.000000] Command line: dummy=dummy root=/dev/mapper/vg--grp--01--23--02--2-LogVol00 ro earlyprintk=xen console=hvc0,115200n8 console=tty0,115200n8 nomodeset text [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] released 0 pages of unused memory [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] Xen: 000000000009f800 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 0000000040000000 (usable) [ 0.000000] Xen: 00000000afde0000 - 00000000afde3000 (ACPI NVS) [ 0.000000] Xen: 00000000afde3000 - 00000000afdf0000 (ACPI data) [ 0.000000] Xen: 00000000afdf0000 - 00000000afe00000 (reserved) [ 0.000000] Xen: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] Xen: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] bootconsole [xenboot0] enabled [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x40000 max_arch_pfn = 0x400000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 0000000040000000 (usable) [ 0.000000] modified: 00000000afde0000 - 00000000afde3000 (ACPI NVS) [ 0.000000] modified: 00000000afde3000 - 00000000afdf0000 (ACPI data) [ 0.000000] modified: 00000000afdf0000 - 00000000afe00000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000040000000 [ 0.000000] 0000000000 - 0040000000 page 4k [ 0.000000] kernel direct mapping tables up to 40000000 @ 100000-302000 [ 0.000000] RAMDISK: 01a76000 - 0f7e5400 [ 0.000000] ACPI: RSDP 00000000000f75d0 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000afde3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000afde3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000afde30c0 06E65 (v01 GBT GBTUACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000afde0000 00040 [ 0.000000] ACPI: HPET 00000000afdea000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000afdea040 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: TAMG 00000000afdea080 0030A (v01 GBT GBT B0 5455312E BG?? 53450101) [ 0.000000] ACPI: APIC 00000000afde9f40 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000040000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000040000000 [ 0.000000] NODE_DATA [0000000000008000 - 000000000000cfff] [ 0.000000] bootmap [000000000000d000 - 0000000000014fff] pages 8 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0040000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [000f9e7000 - 000fa68000] XEN PAGETABLES ==> [000f9e7000 - 000fa68000] [ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #3 [0001000000 - 0001a558e4] TEXT DATA BSS ==> [0001000000 - 0001a558e4] [ 0.000000] #4 [0001a76000 - 000f7e5400] RAMDISK ==> [0001a76000 - 000f7e5400] [ 0.000000] #5 [000f7e6000 - 000f9e7000] XEN START INFO ==> [000f7e6000 - 000f9e7000] [ 0.000000] #6 [0001a56000 - 0001a560fe] BRK ==> [0001a56000 - 0001a560fe] [ 0.000000] #7 [0000100000 - 000027e000] PGTABLE ==> [0000100000 - 000027e000] [ 0.000000] found SMP MP-table at [ffff8800000f5c30] f5c30 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00040000 [ 0.000000] On node 0 totalpages: 262042 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 385 pages reserved [ 0.000000] DMA zone: 3553 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3528 pages used for memmap [ 0.000000] DMA32 zone: 254520 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-0 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 256 [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:6fde0000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.0.0-rc8 (preserve-AD) (dom0) [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88000fa9e000 s91416 r8192 d23272 u122880 [ 0.000000] pcpu-alloc: s91416 r8192 d23272 u122880 alloc=30*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] trying to map vcpu_info 0 at ffff88000faa9020, mfn 21faa9, offset 32 [ 0.000000] cpu 0 using vcpu_info at ffff88000faa9020 [ 0.000000] trying to map vcpu_info 1 at ffff88000fac7020, mfn 21fac7, offset 32 [ 0.000000] cpu 1 using vcpu_info at ffff88000fac7020 [ 0.000000] trying to map vcpu_info 2 at ffff88000fae5020, mfn 21fae5, offset 32 [ 0.000000] cpu 2 using vcpu_info at ffff88000fae5020 [ 0.000000] trying to map vcpu_info 3 at ffff88000fb03020, mfn 21fb03, offset 32 [ 0.000000] cpu 3 using vcpu_info at ffff88000fb03020 [ 0.000000] Xen: using vcpu_info placement [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 258073 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: dummy=dummy root=/dev/mapper/vg--grp--01--23--02--2-LogVol00 ro earlyprintk=xen console=hvc0,115200n8 console=tty0,115200n8 nomodeset text [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] DMA: Placing 64MB software IO TLB between ffff880010c53000 - ffff880014c53000 [ 0.000000] DMA: software IO TLB at phys 0x10c53000 - 0x14c53000 [ 0.000000] xen_swiotlb_fixup: buf=ffff880010c53000 size=67108864 [ 0.000000] xen_swiotlb_fixup: buf=ffff880014cb3000 size=32768 [ 0.000000] Memory: 725620k/1048576k available (5532k kernel code, 408k absent, 322548k reserved, 3061k data, 800k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:1280 [ 0.000000] xen: --> irq=0 [ 0.000000] xen: --> irq=1 [ 0.000000] xen: --> irq=2 [ 0.000000] xen: --> irq=3 [ 0.000000] xen: --> irq=4 [ 0.000000] xen: --> irq=5 [ 0.000000] xen: --> irq=6 [ 0.000000] xen: --> irq=7 [ 0.000000] xen: --> irq=8 [ 0.000000] xen: --> irq=9 [ 0.000000] xen: --> irq=10 [ 0.000000] xen: --> irq=11 [ 0.000000] xen: --> irq=12 [ 0.000000] xen: --> irq=13 [ 0.000000] xen: --> irq=14 [ 0.000000] xen: --> irq=15 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=3 [ 0.000000] xen: registering gsi 9 triggering 0 polarity 1 [ 0.000000] xen_allocate_pirq: returning irq 9 for gsi 9 [ 0.000000] xen: --> irq=9 [ 0.000000] Already setup the GSI :9 [ 0.000000] xen: acpi sci 9 [ 0.000000] Console: colour VGA+ 80x50 [ 0.000000] console [tty0] enabled, bootconsole disabled [ 0.000000] console [hvc0] enabled [ 0.000000] allocated 10485760 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Xen: using vcpuop timer interface [ 0.000000] installing Xen timer for CPU 0 [ 0.000000] alloc irq_desc for 1279 on node 0 [ 0.000000] alloc kstat_irqs on node 0 [ 0.000000] Detected 667544.254 MHz processor. [ 0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6027.59 BogoMIPS (lpj=30137980) [ 0.010029] Security Framework initialized [ 0.014330] SELinux: Disabled at boot. [ 0.018511] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.020034] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.027277] Mount-cache hash table entries: 256 [ 0.030132] Initializing cgroup subsys ns [ 0.034229] Initializing cgroup subsys cpuacct [ 0.038849] Initializing cgroup subsys memory [ 0.040000] Initializing cgroup subsys devices [ 0.040000] Initializing cgroup subsys freezer [ 0.040000] Initializing cgroup subsys net_cls [ 0.040025] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.047502] CPU: L2 Cache: 512K (64 bytes/line) [ 0.050000] CPU 0/0x0 -> Node 0 [ 0.050004] tseg: 00afe00000 [ 0.050006] CPU: Physical Processor ID: 0 [ 0.054252] CPU: Processor Core ID: 0 [ 0.058137] mce: CPU supports 6 MCE banks [ 0.060014] Performance Events: AMD PMU driver. [ 0.064781] ------------[ cut here ]------------ [ 0.069587] WARNING: at arch/x86/xen/enlighten.c:731 xen_apic_write+0x1a/0x20() [ 0.070000] Hardware name: GA-MA790GP-UD4H [ 0.070000] Modules linked in: [ 0.070000] Pid: 0, comm: swapper Not tainted 2.6.32.12 #2 [ 0.070000] Call Trace: [ 0.070000] [] warn_slowpath_common+0x7b/0xc0 [ 0.070000] [] warn_slowpath_null+0x14/0x20 [ 0.070000] [] xen_apic_write+0x1a/0x20 [ 0.070000] [] perf_events_lapic_init+0x36/0x40 [ 0.070000] [] init_hw_perf_events+0x34f/0x3ec [ 0.070000] [] identify_boot_cpu+0x3c/0x3e [ 0.070000] [] check_bugs+0x9/0x2d [ 0.070000] [] start_kernel+0x3e3/0x403 [ 0.070000] [] x86_64_start_reservations+0x125/0x129 [ 0.070000] [] xen_start_kernel+0x6ab/0x6b2 [ 0.070000] ---[ end trace a7919e7f17c0a725 ]--- [ 0.070000] ... version: 0 [ 0.070000] ... bit width: 48 [ 0.070000] ... generic registers: 4 [ 0.070000] ... value mask: 0000ffffffffffff [ 0.070000] ... max period: 00007fffffffffff [ 0.070000] ... fixed-purpose events: 0 [ 0.070000] ... event mask: 000000000000000f [ 0.070000] SMP alternatives: switching to UP code [ 0.070000] ACPI: Core revision 20090903 [ 0.080046] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.085920] ftrace: allocating 21787 entries in 86 pages [ 0.090066] alloc irq_desc for 1278 on node 0 [ 0.090069] alloc kstat_irqs on node 0 [ 0.090080] cpu 0 spinlock event irq 1278 [ 0.094268] alloc irq_desc for 1277 on node 0 [ 0.094269] alloc kstat_irqs on node 0 [ 0.094273] alloc irq_desc for 1276 on node 0 [ 0.094274] alloc kstat_irqs on node 0 [ 0.094278] alloc irq_desc for 1275 on node 0 [ 0.094280] alloc kstat_irqs on node 0 [ 0.094285] alloc irq_desc for 1274 on node 0 [ 0.094286] alloc kstat_irqs on node 0 [ 0.094470] installing Xen timer for CPU 1 [ 0.099502] alloc irq_desc for 1273 on node 0 [ 0.099504] alloc kstat_irqs on node 0 [ 0.099508] alloc irq_desc for 1272 on node 0 [ 0.099510] alloc kstat_irqs on node 0 [ 0.099513] cpu 1 spinlock event irq 1272 [ 0.100021] SMP alternatives: switching to SMP code [ 0.110000] alloc irq_desc for 1271 on node 0 [ 0.110000] alloc kstat_irqs on node 0 [ 0.110006] alloc irq_desc for 1270 on node 0 [ 0.110007] alloc kstat_irqs on node 0 [ 0.110011] alloc irq_desc for 1269 on node 0 [ 0.110013] alloc kstat_irqs on node 0 [ 0.110016] alloc irq_desc for 1268 on node 0 [ 0.110017] alloc kstat_irqs on node 0 [ 0.000016] Initializing CPU#1 [ 0.000064] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.000066] CPU: L2 Cache: 512K (64 bytes/line) [ 0.000068] CPU 1/0x0 -> Node 0 [ 0.000070] CPU: Physical Processor ID: 0 [ 0.000071] CPU: Processor Core ID: 1 [ 0.110201] installing Xen timer for CPU 2 [ 0.120002] alloc irq_desc for 1267 on node 0 [ 0.120004] alloc kstat_irqs on node 0 [ 0.120008] alloc irq_desc for 1266 on node 0 [ 0.120009] alloc kstat_irqs on node 0 [ 0.120012] cpu 2 spinlock event irq 1266 [ 0.124172] alloc irq_desc for 1265 on node 0 [ 0.124174] alloc kstat_irqs on node 0 [ 0.124178] alloc irq_desc for 1264 on node 0 [ 0.124179] alloc kstat_irqs on node 0 [ 0.124183] alloc irq_desc for 1263 on node 0 [ 0.124185] alloc kstat_irqs on node 0 [ 0.124188] alloc irq_desc for 1262 on node 0 [ 0.124189] alloc kstat_irqs on node 0 [ 0.000014] Initializing CPU#2 [ 0.000068] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.000070] CPU: L2 Cache: 512K (64 bytes/line) [ 0.000072] CPU 2/0x0 -> Node 0 [ 0.000074] CPU: Physical Processor ID: 0 [ 0.000075] CPU: Processor Core ID: 3 [ 0.124355] installing Xen timer for CPU 3 [ 0.130002] alloc irq_desc for 1261 on node 0 [ 0.130004] alloc kstat_irqs on node 0 [ 0.130008] alloc irq_desc for 1260 on node 0 [ 0.130009] alloc kstat_irqs on node 0 [ 0.130012] cpu 3 spinlock event irq 1260 [ 0.134274] alloc irq_desc for 1259 on node 0 [ 0.134275] alloc kstat_irqs on node 0 [ 0.134279] alloc irq_desc for 1258 on node 0 [ 0.134281] alloc kstat_irqs on node 0 [ 0.134284] alloc irq_desc for 1257 on node 0 [ 0.134286] alloc kstat_irqs on node 0 [ 0.134289] alloc irq_desc for 1256 on node 0 [ 0.134291] alloc kstat_irqs on node 0 [ 0.000017] Initializing CPU#3 [ 0.000063] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.000065] CPU: L2 Cache: 512K (64 bytes/line) [ 0.000067] CPU 3/0x0 -> Node 0 [ 0.000069] CPU: Physical Processor ID: 0 [ 0.000070] CPU: Processor Core ID: 2 [ 0.134404] Brought up 4 CPUs [ 0.140000] CPU0 attaching sched-domain: [ 0.140000] domain 0: span 0-3 level CPU [ 0.140000] groups: 0 1 2 3 [ 0.140000] CPU1 attaching sched-domain: [ 0.140000] domain 0: span 0-3 level CPU [ 0.140000] groups: 1 2 3 0 [ 0.140000] CPU2 attaching sched-domain: [ 0.140000] domain 0: span 0-3 level CPU [ 0.140000] groups: 2 3 0 1 [ 0.140000] CPU3 attaching sched-domain: [ 0.140000] domain 0: span 0-3 level CPU [ 0.140000] groups: 3 0 1 2 [ 0.140079] devtmpfs: initialized [ 0.144569] Grant table initialized [ 0.144569] regulator: core version 0.5 [ 0.147695] Time: 1:59:06 Date: 05/07/10 [ 0.150034] NET: Registered protocol family 16 [ 0.154716] alloc irq_desc for 1255 on node 0 [ 0.154718] alloc kstat_irqs on node 0 [ 0.154740] node 0 link 0: io port [c000, ffff] [ 0.154740] TOM: 00000000d0000000 aka 3328M [ 0.154740] Fam 10h mmconf [e0000000, e00fffff] [ 0.154740] node 0 link 0: mmio [a0000, bffff] [ 0.154740] node 0 link 0: mmio [d0000000, dfffffff] [ 0.154740] node 0 link 0: mmio [f0000000, fe02ffff] [ 0.154740] node 0 link 0: mmio [e0000000, e03fffff] ==> [e0100000, e03fffff] [ 0.154740] TOM2: 0000000230000000 aka 8960M [ 0.158913] bus: [00,03] on node 0 link 0 [ 0.158915] bus: 00 index 0 io port: [0, ffff] [ 0.158916] bus: 00 index 1 mmio: [a0000, bffff] [ 0.158918] bus: 00 index 2 mmio: [d0000000, dfffffff] [ 0.158920] bus: 00 index 3 mmio: [e0400000, ffffffff] [ 0.158921] bus: 00 index 4 mmio: [e0100000, e03fffff] [ 0.158923] bus: 00 index 5 mmio: [230000000, fcffffffff] [ 0.160032] ACPI: bus type pci registered [ 0.164286] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.170000] PCI: MCFG area at e0000000 reserved in E820 [ 0.199854] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.200000] PCI: Using configuration type 1 for base access [ 0.200595] bio: create slab at 0 [ 0.204195] ERROR: Unable to locate IOAPIC for GSI 9 [ 0.210006] ACPI: EC: Look up EC in DSDT [ 0.219602] ACPI: Interpreter enabled [ 0.220000] ACPI: (supports S0 S1 S4 S5) [ 0.220000] ACPI: Using IOAPIC for interrupt routing [ 0.224965] ACPI: No dock devices found. [ 0.229147] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.230000] pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff] [ 0.230000] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.230000] pci 0000:00:0a.0: PME# disabled [ 0.230054] pci 0000:00:11.0: reg 10 io port: [0xff00-0xff07] [ 0.230065] pci 0000:00:11.0: reg 14 io port: [0xfe00-0xfe03] [ 0.230074] pci 0000:00:11.0: reg 18 io port: [0xfd00-0xfd07] [ 0.230083] pci 0000:00:11.0: reg 1c io port: [0xfc00-0xfc03] [ 0.230091] pci 0000:00:11.0: reg 20 io port: [0xfb00-0xfb0f] [ 0.230100] pci 0000:00:11.0: reg 24 32bit mmio: [0xfe02f000-0xfe02f3ff] [ 0.230172] pci 0000:00:12.0: reg 10 32bit mmio: [0xfe02e000-0xfe02efff] [ 0.230247] pci 0000:00:12.1: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff] [ 0.230347] pci 0000:00:12.2: reg 10 32bit mmio: [0xfe02c000-0xfe02c0ff] [ 0.230420] pci 0000:00:12.2: supports D1 D2 [ 0.230421] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.236587] pci 0000:00:12.2: PME# disabled [ 0.240000] pci 0000:00:13.0: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff] [ 0.240000] pci 0000:00:13.1: reg 10 32bit mmio: [0xfe02a000-0xfe02afff] [ 0.240000] pci 0000:00:13.2: reg 10 32bit mmio: [0xfe029000-0xfe0290ff] [ 0.240000] pci 0000:00:13.2: supports D1 D2 [ 0.240000] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.240000] pci 0000:00:13.2: PME# disabled [ 0.240039] pci 0000:00:14.1: reg 10 io port: [0x00-0x07] [ 0.240048] pci 0000:00:14.1: reg 14 io port: [0x00-0x03] [ 0.240056] pci 0000:00:14.1: reg 18 io port: [0x00-0x07] [ 0.240065] pci 0000:00:14.1: reg 1c io port: [0x00-0x03] [ 0.240074] pci 0000:00:14.1: reg 20 io port: [0xfa00-0xfa0f] [ 0.240164] pci 0000:00:14.2: reg 10 64bit mmio: [0xfe024000-0xfe027fff] [ 0.240224] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.246559] pci 0000:00:14.2: PME# disabled [ 0.250000] pci 0000:00:14.5: reg 10 32bit mmio: [0xfe028000-0xfe028fff] [ 0.250198] pci 0000:01:05.0: reg 10 32bit mmio pref: [0xd0000000-0xdfffffff] [ 0.250204] pci 0000:01:05.0: reg 14 io port: [0xee00-0xeeff] [ 0.250210] pci 0000:01:05.0: reg 18 32bit mmio: [0xfdfe0000-0xfdfeffff] [ 0.250223] pci 0000:01:05.0: reg 24 32bit mmio: [0xfde00000-0xfdefffff] [ 0.250246] pci 0000:01:05.0: supports D1 D2 [ 0.250280] pci 0000:01:05.1: reg 10 32bit mmio: [0xfdffc000-0xfdffffff] [ 0.250321] pci 0000:01:05.1: supports D1 D2 [ 0.250384] pci 0000:00:01.0: bridge io port: [0xe000-0xefff] [ 0.250388] pci 0000:00:01.0: bridge 32bit mmio: [0xfde00000-0xfdffffff] [ 0.250394] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.250442] pci 0000:02:00.0: reg 10 io port: [0xde00-0xdeff] [ 0.250463] pci 0000:02:00.0: reg 18 64bit mmio pref: [0xfdaff000-0xfdafffff] [ 0.250477] pci 0000:02:00.0: reg 20 64bit mmio pref: [0xfdae0000-0xfdaeffff] [ 0.250486] pci 0000:02:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] [ 0.250527] pci 0000:02:00.0: supports D1 D2 [ 0.250529] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.257361] pci 0000:02:00.0: PME# disabled [ 0.260000] pci 0000:00:0a.0: bridge io port: [0xd000-0xdfff] [ 0.260000] pci 0000:00:0a.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff] [ 0.260000] pci 0000:00:0a.0: bridge 64bit mmio pref: [0xfda00000-0xfdafffff] [ 0.260000] pci 0000:03:0e.0: reg 10 32bit mmio: [0xfdcff000-0xfdcff7ff] [ 0.260000] pci 0000:03:0e.0: reg 14 32bit mmio: [0xfdcf8000-0xfdcfbfff] [ 0.260000] pci 0000:03:0e.0: supports D1 D2 [ 0.260000] pci 0000:03:0e.0: PME# supported from D0 D1 D2 D3hot [ 0.260000] pci 0000:03:0e.0: PME# disabled [ 0.260000] pci 0000:00:14.4: transparent bridge [ 0.260000] pci 0000:00:14.4: bridge io port: [0xc000-0xcfff] [ 0.260000] pci 0000:00:14.4: bridge 32bit mmio: [0xfdc00000-0xfdcfffff] [ 0.260000] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfdb00000-0xfdbfffff] [ 0.260000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.260336] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.260464] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] [ 0.260526] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.335522] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.340085] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.347747] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.350083] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.357756] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.360082] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.367757] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.370089] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.377826] sync cpu 0 get result 1 max_id 3 [ 0.377832] sync cpu 1 get result 1 max_id 3 [ 0.377838] sync cpu 2 get result 1 max_id 3 [ 0.377845] sync cpu 3 get result 1 max_id 3 [ 0.377851] alloc irq_desc for 1254 on node 0 [ 0.377853] alloc kstat_irqs on node 0 [ 0.377884] xen_balloon: Initialising balloon driver with page order 0. [ 0.380067] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.388495] vgaarb: loaded [ 0.390098] SCSI subsystem initialized [ 0.393999] libata version 3.00 loaded. [ 0.393999] usbcore: registered new interface driver usbfs [ 0.395663] usbcore: registered new interface driver hub [ 0.400026] usbcore: registered new device driver usb [ 0.405203] ACPI: WMI: Mapper loaded [ 0.405203] PCI: Using ACPI for IRQ routing [ 0.408115] pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff] [ 0.410000] pci 0000:00:00.0: BAR 3: can't allocate resource [ 0.410074] NetLabel: Initializing [ 0.413606] NetLabel: domain hash size = 128 [ 0.418147] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.420000] NetLabel: unlabeled traffic allowed by default [ 0.420057] Switching to clocksource xen [ 0.424063] pnp: PnP ACPI init [ 0.424712] ACPI: bus type pnp registered [ 0.429892] xen: registering gsi 8 triggering 1 polarity 0 [ 0.429895] xen_allocate_pirq: returning irq 8 for gsi 8 [ 0.435392] xen: --> irq=8 [ 0.435403] Already setup the GSI :8 [ 0.439331] xen: registering gsi 13 triggering 1 polarity 0 [ 0.439333] xen_allocate_pirq: returning irq 13 for gsi 13 [ 0.445078] xen: --> irq=13 [ 0.445086] Already setup the GSI :13 [ 0.449470] xen: registering gsi 4 triggering 1 polarity 0 [ 0.449472] xen_allocate_pirq: returning irq 4 for gsi 4 [ 0.454966] xen: --> irq=4 [ 0.454973] Already setup the GSI :4 [ 0.458853] xen: registering gsi 12 triggering 1 polarity 0 [ 0.458855] xen_allocate_pirq: returning irq 12 for gsi 12 [ 0.464517] xen: --> irq=12 [ 0.464523] Already setup the GSI :12 [ 0.468375] xen: registering gsi 1 triggering 1 polarity 0 [ 0.468377] xen_allocate_pirq: returning irq 1 for gsi 1 [ 0.473924] xen: --> irq=1 [ 0.473931] Already setup the GSI :1 [ 0.478040] pnp 00:0c: mem resource (0xd1c00-0xd3fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.483927] pnp 00:0c: mem resource (0xf0000-0xf7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.483927] pnp 00:0c: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.483927] pnp 00:0c: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.483927] pnp 00:0c: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.483927] pnp 00:0c: mem resource (0x100000-0xafddffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.539754] pnp: PnP ACPI: found 13 devices [ 0.544115] ACPI: ACPI bus type pnp unregistered [ 0.548974] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.555504] system 00:01: ioport range 0x220-0x225 has been reserved [ 0.558962] system 00:01: ioport range 0x290-0x294 has been reserved [ 0.568623] system 00:02: ioport range 0x4100-0x411f has been reserved [ 0.575489] system 00:02: ioport range 0x228-0x22f has been reserved [ 0.578618] system 00:02: ioport range 0x40b-0x40b has been reserved [ 0.578618] system 00:02: ioport range 0x4d6-0x4d6 has been reserved [ 0.578618] system 00:02: ioport range 0xc00-0xc01 has been reserved [ 0.578618] system 00:02: ioport range 0xc14-0xc14 has been reserved [ 0.578618] system 00:02: ioport range 0xc50-0xc52 has been reserved [ 0.578618] system 00:02: ioport range 0xc6c-0xc6d has been reserved [ 0.578618] system 00:02: ioport range 0xc6f-0xc6f has been reserved [ 0.578618] system 00:02: ioport range 0xcd0-0xcd1 has been reserved [ 0.578618] system 00:02: ioport range 0xcd2-0xcd3 has been reserved [ 0.578618] system 00:02: ioport range 0xcd4-0xcdf has been reserved [ 0.578618] system 00:02: ioport range 0x4000-0x40fe has been reserved [ 0.578618] system 00:02: ioport range 0x4210-0x4217 has been reserved [ 0.578618] system 00:02: ioport range 0xb00-0xb0f has been reserved [ 0.578618] system 00:02: ioport range 0xb10-0xb1f has been reserved [ 0.674811] system 00:02: ioport range 0xb20-0xb3f has been reserved [ 0.681421] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved [ 0.688828] system 00:0c: iomem range 0xafde0000-0xafdfffff could not be reserved [ 0.691414] system 00:0c: iomem range 0xffff0000-0xffffffff has been reserved [ 0.691414] system 00:0c: iomem range 0xafef0000-0xcfeeffff has been reserved [ 0.691414] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.691414] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.691414] system 00:0c: iomem range 0xfff80000-0xfffeffff has been reserved [ 0.734484] pciback 0000:00:00.0: probing... [ 0.734528] pciback 0000:00:01.0: probing... [ 0.734563] pciback 0000:00:0a.0: probing... [ 0.734597] pciback 0000:00:11.0: probing... [ 0.734630] pciback 0000:00:12.0: probing... [ 0.734666] pciback 0000:00:12.1: probing... [ 0.734702] pciback 0000:00:12.2: probing... [ 0.734737] pciback 0000:00:13.0: probing... [ 0.734771] pciback 0000:00:13.1: probing... [ 0.734805] pciback 0000:00:13.2: probing... [ 0.734841] pciback 0000:00:14.0: probing... [ 0.734876] pciback 0000:00:14.1: probing... [ 0.734910] pciback 0000:00:14.2: probing... [ 0.734946] pciback 0000:00:14.3: probing... [ 0.734980] pciback 0000:00:14.4: probing... [ 0.735017] pciback 0000:00:14.5: probing... [ 0.735051] pciback 0000:00:18.0: probing... [ 0.735086] pciback 0000:00:18.1: probing... [ 0.735120] pciback 0000:00:18.2: probing... [ 0.735154] pciback 0000:00:18.3: probing... [ 0.735190] pciback 0000:00:18.4: probing... [ 0.735225] pciback 0000:01:05.0: probing... [ 0.735259] pciback 0000:01:05.1: probing... [ 0.735293] pciback 0000:02:00.0: probing... [ 0.735327] pciback 0000:03:0e.0: probing... [ 0.737734] PM-Timer failed consistency check (0x0xffffff) - aborting. [ 0.744653] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.745320] pci 0000:00:01.0: IO window: 0xe000-0xefff [ 0.745320] pci 0000:00:01.0: MEM window: 0xfde00000-0xfdffffff [ 0.745320] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.745320] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02 [ 0.745320] pci 0000:00:0a.0: IO window: 0xd000-0xdfff [ 0.745320] pci 0000:00:0a.0: MEM window: 0xfdd00000-0xfddfffff [ 0.745320] pci 0000:00:0a.0: PREFETCH window: 0x000000fda00000-0x000000fdafffff [ 0.745320] pci 0000:00:14.4: PCI bridge, secondary bus 0000:03 [ 0.745320] pci 0000:00:14.4: IO window: 0xc000-0xcfff [ 0.745320] pci 0000:00:14.4: MEM window: 0xfdc00000-0xfdcfffff [ 0.745320] pci 0000:00:14.4: PREFETCH window: 0xfdb00000-0xfdbfffff [ 0.745320] xen: registering gsi 18 triggering 0 polarity 1 [ 0.745320] alloc irq_desc for 18 on node 0 [ 0.745320] alloc kstat_irqs on node 0 [ 0.822177] xen: --> irq=18 [ 0.822188] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.829109] pci 0000:00:0a.0: setting latency timer to 64 [ 0.829119] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.829121] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.829123] pci_bus 0000:01: resource 0 io: [0xe000-0xefff] [ 0.829125] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdffffff] [ 0.829127] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.829129] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff] [ 0.829131] pci_bus 0000:02: resource 1 mem: [0xfdd00000-0xfddfffff] [ 0.829133] pci_bus 0000:02: resource 2 pref mem [0xfda00000-0xfdafffff] [ 0.829136] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff] [ 0.829138] pci_bus 0000:03: resource 1 mem: [0xfdc00000-0xfdcfffff] [ 0.829140] pci_bus 0000:03: resource 2 pref mem [0xfdb00000-0xfdbfffff] [ 0.829142] pci_bus 0000:03: resource 3 io: [0x00-0xffff] [ 0.829144] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.829172] NET: Registered protocol family 2 [ 0.833860] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.841902] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 0.850288] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.857528] TCP: Hash tables configured (established 131072 bind 65536) [ 0.860007] TCP reno registered [ 0.860007] NET: Registered protocol family 1 [ 1.020130] pci 0000:01:05.0: Boot video device [ 1.020202] Trying to unpack rootfs image as initramfs... [ 1.228490] Freeing initrd memory: 226749k freed [ 1.326952] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.330012] DMA: Placing 64MB software IO TLB between ffff880010c53000 - ffff880014c53000 [ 1.330012] DMA: software IO TLB at phys 0x10c53000 - 0x14c53000 [ 1.348873] Scanning for low memory corruption every 60 seconds [ 1.355204] audit: initializing netlink socket (disabled) [ 1.360772] type=2000 audit(1273197548.595:1): initialized [ 1.372676] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.380655] VFS: Disk quotas dquot_6.5.2 [ 1.384780] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.391988] fuse init (API version 7.13) [ 1.396101] msgmni has been set to 1860 [ 1.400479] alg: No test for stdrng (krng) [ 1.404681] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.412402] io scheduler noop registered [ 1.414609] io scheduler anticipatory registered [ 1.414609] io scheduler deadline registered (default) [ 1.426833] io scheduler cfq registered [ 1.431150] alloc irq_desc for 1253 on node 0 [ 1.431152] alloc kstat_irqs on node 0 [ 1.431182] pcieport 0000:00:0a.0: setting latency timer to 64 [ 1.431267] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.437034] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.444020] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.452565] ACPI: Power Button [PWRB] [ 1.456501] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.464149] ACPI: Power Button [PWRF] [ 1.470196] Event-channel device installed. [ 1.474546] pciback: pcistub_init_devices_late [ 1.478352] blktap_device_init: blktap device major 253 [ 1.483680] blktap_ring_init: blktap ring major: 252 [ 1.489641] registering netback [ 1.492961] xen-platform-pcifailed backend handshake: unrecognised magic value [ 1.500524] alloc irq_desc for 1252 on node 0 [ 1.500526] alloc kstat_irqs on node 0 [ 1.501458] alloc irq_desc for 1251 on node 0 [ 1.501460] alloc kstat_irqs on node 0 [ 1.501789] hpet_acpi_add: no address or irqs in _CRS [ 1.506963] Linux agpgart interface v0.103 [ 1.511273] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.518864] brd: module loaded [ 1.522389] loop: module loaded [ 1.525723] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 1.534007] xen: registering gsi 16 triggering 0 polarity 1 [ 1.534017] alloc irq_desc for 16 on node 0 [ 1.534019] alloc kstat_irqs on node 0 [ 1.534022] xen: --> irq=16 [ 1.534035] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.541900] Fixed MDIO Bus: probed [ 1.545475] PPP generic driver version 2.4.2 [ 1.550010] tun: Universal TUN/TAP device driver, 1.6 [ 1.555212] tun: (C) 1999-2004 Max Krasnyansky [ 1.561802] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.568692] xen: registering gsi 17 triggering 0 polarity 1 [ 1.568695] alloc irq_desc for 17 on node 0 [ 1.568697] alloc kstat_irqs on node 0 [ 1.568700] xen: --> irq=17 [ 1.568707] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.576085] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 1.581487] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.589280] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround [ 1.591459] ehci_hcd 0000:00:12.2: debug port 1 [ 1.591459] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000 [ 1.607704] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.613725] usb usb1: configuration #1 chosen from 1 choice [ 1.619454] hub 1-0:1.0: USB hub found [ 1.623362] hub 1-0:1.0: 6 ports detected [ 1.627723] xen: registering gsi 19 triggering 0 polarity 1 [ 1.627727] alloc irq_desc for 19 on node 0 [ 1.627728] alloc kstat_irqs on node 0 [ 1.627731] xen: --> irq=19 [ 1.627738] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.635094] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 1.637705] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.637705] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround [ 1.637705] ehci_hcd 0000:00:13.2: debug port 1 [ 1.637705] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000 [ 1.666676] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.672776] usb usb2: configuration #1 chosen from 1 choice [ 1.678600] hub 2-0:1.0: USB hub found [ 1.682590] hub 2-0:1.0: 6 ports detected [ 1.686883] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.693329] xen: registering gsi 16 triggering 0 polarity 1 [ 1.693331] xen_allocate_pirq: returning irq 16 for gsi 16 [ 1.699035] xen: --> irq=16 [ 1.699037] Already setup the GSI :16 [ 1.702911] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.710299] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 1.715794] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.720280] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000 [ 1.774119] usb usb3: configuration #1 chosen from 1 choice [ 1.779908] hub 3-0:1.0: USB hub found [ 1.783869] hub 3-0:1.0: 3 ports detected [ 1.788159] xen: registering gsi 16 triggering 0 polarity 1 [ 1.788161] xen_allocate_pirq: returning irq 16 for gsi 16 [ 1.793807] xen: --> irq=16 [ 1.793818] Already setup the GSI :16 [ 1.797706] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.803812] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 1.810768] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.818532] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000 [ 1.874118] usb usb4: configuration #1 chosen from 1 choice [ 1.879935] hub 4-0:1.0: USB hub found [ 1.883921] hub 4-0:1.0: 3 ports detected [ 1.888196] xen: registering gsi 18 triggering 0 polarity 1 [ 1.888198] xen_allocate_pirq: returning irq 18 for gsi 18 [ 1.893845] xen: --> irq=18 [ 1.893852] Already setup the GSI :18 [ 1.897643] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.903849] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.910616] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.918397] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000 [ 1.974123] usb usb5: configuration #1 chosen from 1 choice [ 1.979969] hub 5-0:1.0: USB hub found [ 1.983961] hub 5-0:1.0: 3 ports detected [ 1.988316] xen: registering gsi 18 triggering 0 polarity 1 [ 1.988318] xen_allocate_pirq: returning irq 18 for gsi 18 [ 1.993966] xen: --> irq=18 [ 1.993975] Already setup the GSI :18 [ 1.997778] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.003970] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 2.003970] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 2.003970] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000 [ 2.054108] usb usb6: configuration #1 chosen from 1 choice [ 2.059975] hub 6-0:1.0: USB hub found [ 2.063928] hub 6-0:1.0: 3 ports detected [ 2.068237] xen: registering gsi 18 triggering 0 polarity 1 [ 2.068239] xen_allocate_pirq: returning irq 18 for gsi 18 [ 2.073952] xen: --> irq=18 [ 2.073960] Already setup the GSI :18 [ 2.077840] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.083956] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 2.090898] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 2.098676] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000 [ 2.154110] usb usb7: configuration #1 chosen from 1 choice [ 2.159892] hub 7-0:1.0: USB hub found [ 2.163779] hub 7-0:1.0: 2 ports detected [ 2.167990] uhci_hcd: USB Universal Host Controller Interface driver [ 2.174662] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.183025] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.188162] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.193425] mice: PS/2 mouse device common for all mice [ 2.198955] rtc_cmos 00:05: RTC can wake from S4 [ 2.203352] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 2.210117] rtc0: alarms up to one month, 242 bytes nvram [ 2.215877] device-mapper: uevent: version 1.0.3 [ 2.220774] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx [ 2.229572] device-mapper: multipath: version 1.1.0 loaded [ 2.235205] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.242372] cpuidle: using governor ladder [ 2.246602] cpuidle: using governor menu [ 2.251825] TCP cubic registered [ 2.255316] NET: Registered protocol family 10 [ 2.260025] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 2.260360] lo: Disabled Privacy Extensions [ 2.260601] NET: Registered protocol family 17 [ 2.278060] powernow-k8: Found 1 AMD Phenom(tm) II X4 940 Processor processors (4 cpu cores) (version 2.20.00) [ 2.280003] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found. [ 2.280003] [Firmware Bug]: powernow-k8: Try again with latest BIOS. [ 2.302933] PM: Resume from disk failed. [ 2.302944] registered taskstats version 1 [ 2.307635] Magic number: 10:64:963 [ 2.311561] rtc_cmos 00:05: setting system clock to 2010-05-07 01:59:09 UTC (1273197549) [ 2.319921] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.321532] EDD information not available. [ 2.330670] Freeing unused kernel memory: 800k freed [ 2.336094] Write protecting the kernel read-only data: 7812k [ 2.377901] udev: starting version 151 [ 2.434300] scsi0 : pata_atiixp [ 2.437684] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.443612] xen: registering gsi 18 triggering 0 polarity 1 [ 2.443615] xen_allocate_pirq: returning irq 18 for gsi 18 [ 2.449301] xen: --> irq=18 [ 2.449309] Already setup the GSI :18 [ 2.453116] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.460360] r8169 0000:02:00.0: setting latency timer to 64 [ 2.460407] alloc irq_desc for 1250 on node 0 [ 2.460409] alloc kstat_irqs on node 0 [ 2.461073] eth0: RTL8168c/8111c at 0xffffc900001ea000, 00:24:1d:19:05:df, XID 1c4000c0 IRQ 1250 [ 2.473401] scsi1 : pata_atiixp [ 2.474826] md: linear personality registered for level -1 [ 2.502807] md: multipath personality registered for level -4 [ 2.519018] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 [ 2.526363] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 [ 2.533939] xen: registering gsi 22 triggering 0 polarity 1 [ 2.533959] alloc irq_desc for 22 on node 0 [ 2.533964] alloc kstat_irqs on node 0 [ 2.533975] xen: --> irq=22 [ 2.533997] ohci1394 0000:03:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 2.543434] ahci 0000:00:11.0: version 3.0 [ 2.543451] xen: registering gsi 22 triggering 0 polarity 1 [ 2.543454] xen_allocate_pirq: returning irq 22 for gsi 22 [ 2.549068] xen: --> irq=22 [ 2.549071] Already setup the GSI :22 [ 2.551284] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 2.560166] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 2.568601] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 2.578077] scsi2 : ahci [ 2.580845] scsi3 : ahci [ 2.582197] md: raid0 personality registered for level 0 [ 2.589128] scsi4 : ahci [ 2.591862] scsi5 : ahci [ 2.594547] scsi6 : ahci [ 2.597269] scsi7 : ahci [ 2.600088] ata3: SATA max UDMA/133 irq_stat 0x00400000, PHY RDY changed irq 22 [ 2.607669] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 [ 2.610003] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 [ 2.610003] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 [ 2.610003] ata7: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22 [ 2.610003] ata8: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22 [ 2.646400] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[fdcff000-fdcff7ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 2.730506] ata1.01: ATAPI: HL-DT-STDVD-ROM GDR8164B, 0L06, max UDMA/33 [ 2.770452] ata1.01: configured for UDMA/33 [ 2.779025] scsi 0:0:1:0: CD-ROM HL-DT-ST DVD-ROM GDR8164B 0L06 PQ: 0 ANSI: 5 [ 2.795469] sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray [ 2.801673] Uniform CD-ROM driver Revision: 3.20 [ 2.806468] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 2.806537] sr 0:0:1:0: Attached scsi generic sg0 type 5 [ 3.170048] ata7: softreset failed (device not ready) [ 3.170055] ata4: softreset failed (device not ready) [ 3.170058] ata4: applying SB600 PMP SRST workaround and retrying [ 3.170081] ata6: softreset failed (device not ready) [ 3.170084] ata6: applying SB600 PMP SRST workaround and retrying [ 3.170111] ata8: softreset failed (device not ready) [ 3.170114] ata8: applying SB600 PMP SRST workaround and retrying [ 3.170141] ata5: softreset failed (device not ready) [ 3.170144] ata5: applying SB600 PMP SRST workaround and retrying [ 3.180021] ata7: applying SB600 PMP SRST workaround and retrying [ 3.350064] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.350068] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.350098] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.350129] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.372764] ata5.00: ATA-8: Hitachi HDT721025SLA380, STBOA31B, max UDMA/133 [ 3.372766] ata5.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 3.373859] ata5.00: configured for UDMA/133 [ 3.374992] ata4.00: ATA-8: Hitachi HDT721025SLA380, STBOA31B, max UDMA/133 [ 3.374994] ata4.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 3.376093] ata4.00: configured for UDMA/133 [ 3.377275] ata6.00: ATA-8: Hitachi HDT721025SLA380, STBOA31B, max UDMA/133 [ 3.377277] ata6.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 3.378371] ata6.00: configured for UDMA/133 [ 3.440103] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.461124] ata8.00: ATA-8: Hitachi HDP725050GLA360, GM4OA5CA, max UDMA/133 [ 3.468367] ata8.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 3.471836] ata7.00: ATA-8: Hitachi HDP725050GLA360, GM4OA5CA, max UDMA/133 [ 3.471838] ata7.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 3.472813] ata7.00: configured for UDMA/133 [ 3.495903] ata8.00: configured for UDMA/133 [ 3.620037] ata3: softreset failed (device not ready) [ 3.625291] ata3: applying SB600 PMP SRST workaround and retrying [ 3.800046] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.833760] ata3.00: ATA-8: Hitachi HDT721025SLA380, STBOA31B, max UDMA/133 [ 3.840997] ata3.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 3.849458] ata3.00: configured for UDMA/133 [ 3.880141] scsi 2:0:0:0: Direct-Access ATA Hitachi HDT72102 STBO PQ: 0 ANSI: 5 [ 3.888541] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 3.888547] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 3.888590] sd 2:0:0:0: [sda] Write Protect is off [ 3.888592] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.888613] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.888774] sda: sda1 sda2 sda3 [ 3.919815] scsi 3:0:0:0: Direct-Access ATA Hitachi HDT72102 STBO PQ: 0 ANSI: 5 [ 3.919919] sd 2:0:0:0: [sda] Attached SCSI disk [ 3.933204] sd 3:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 3.933221] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 3.933354] scsi 4:0:0:0: Direct-Access ATA Hitachi HDT72102 STBO PQ: 0 ANSI: 5 [ 3.933470] sd 4:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 3.933496] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 3.933516] sd 4:0:0:0: [sdc] Write Protect is off [ 3.933518] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 3.933594] scsi 5:0:0:0: Direct-Access ATA Hitachi HDT72102 STBO PQ: 0 ANSI: 5 [ 3.933694] sd 5:0:0:0: [sdd] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 3.933706] sd 5:0:0:0: Attached scsi generic sg4 type 0 [ 3.933744] sd 5:0:0:0: [sdd] Write Protect is off [ 3.933746] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 3.933757] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.933770] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.933925] sdc: [ 3.933953] sdd: [ 3.933992] scsi 6:0:0:0: Direct-Access ATA Hitachi HDP72505 GM4O PQ: 0 ANSI: 5 [ 3.934086] sd 6:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 3.934101] sd 6:0:0:0: Attached scsi generic sg5 type 0 [ 3.934127] sd 6:0:0:0: [sde] Write Protect is off [ 3.934129] sd 6:0:0:0: [sde] Mode Sense: 00 3a 00 00 [ 3.934181] scsi 7:0:0:0: Direct-Access ATA Hitachi HDP72505 GM4O PQ: 0 ANSI: 5 [ 3.934275] sd 7:0:0:0: [sdf] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 3.934294] sd 7:0:0:0: Attached scsi generic sg6 type 0 [ 3.934317] sd 7:0:0:0: [sdf] Write Protect is off [ 3.934318] sd 7:0:0:0: [sdf] Mode Sense: 00 3a 00 00 [ 3.934362] sd 7:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.934367] sd 6:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.934503] sdf: [ 3.934513] sde: sdc1 [ 4.095402] sdf1 [ 4.095437] sd 3:0:0:0: [sdb] Write Protect is off [ 4.095439] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 4.095460] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.100120] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001ab1780000241d] [ 4.101251] sdf2 sdf3 [ 4.114440] sdd1 [ 4.116485] sde1 sde2 sde3 [ 4.119659] sdb: [ 4.119676] sd 6:0:0:0: [sde] Attached SCSI disk [ 4.119744] sd 7:0:0:0: [sdf] Attached SCSI disk [ 4.131130] sd 4:0:0:0: [sdc] Attached SCSI disk [ 4.131173] sd 5:0:0:0: [sdd] Attached SCSI disk [ 4.157276] sdb1 sdb2 sdb3 [ 4.160380] sd 3:0:0:0: [sdb] Attached SCSI disk [ 4.172851] md: raid1 personality registered for level 1 [ 4.184930] async_tx: api initialized (async) [ 4.190811] xor: automatically using best checksumming function: generic_sse [ 4.240015] generic_sse: 4929.200 MB/sec [ 4.243771] xor: using function: generic_sse (4929.200 MB/sec) [ 4.318454] md: bind [ 4.325096] md: bind [ 4.331112] raid1: raid set md3 active with 2 out of 2 mirrors [ 4.337250] md3: detected capacity change from 0 to 250056605696 [ 4.345257] md: bind [ 4.349354] md: bind [ 4.351176] md3: unknown partition table [ 4.357714] md: bind [ 4.416566] md: bind [ 4.420029] md: bind [ 4.420034] raid6: int64x1 2508 MB/s [ 4.427111] md: bind [ 4.447733] md: bind [ 4.451271] md: bind [ 4.456521] raid1: raid set md6 active with 2 out of 2 mirrors [ 4.462518] md6: detected capacity change from 0 to 483605217280 [ 4.469274] raid1: raid set md5 active with 2 out of 2 mirrors [ 4.475269] md5: detected capacity change from 0 to 15998058496 [ 4.482757] md6: [ 4.484562] md5: unknown partition table [ 4.489284] unknown partition table [ 4.545684] md: bind [ 4.549068] md: bind [ 4.590007] raid6: int64x2 3502 MB/s [ 4.760024] raid6: int64x4 2689 MB/s [ 4.930014] raid6: int64x8 2353 MB/s [ 5.100021] raid6: sse2x1 3317 MB/s [ 5.270015] raid6: sse2x2 5026 MB/s [ 5.448014] raid6: sse2x4 5248 MB/s [ 5.451883] raid6: using algorithm sse2x4 (5248 MB/s) [ 5.457372] raid1: raid set md1 active with 2 out of 2 mirrors [ 5.457379] raid1: raid set md0 active with 2 out of 2 mirrors [ 5.457404] md0: detected capacity change from 0 to 526319616 [ 5.472698] md: raid6 personality registered for level 6 [ 5.472700] md: raid5 personality registered for level 5 [ 5.472702] md: raid4 personality registered for level 4 [ 5.492106] md1: detected capacity change from 0 to 19329318912 [ 5.499096] md: bind [ 5.502037] md: bind [ 5.505356] md0: [ 5.509949] md1: unknown partition table [ 5.514663] raid1: raid set md4 active with 2 out of 2 mirrors [ 5.520610] md4: detected capacity change from 0 to 501612544 [ 5.529304] md4: unknown partition table [ 5.534764] raid1: raid set md2 active with 2 out of 2 mirrors [ 5.540914] md2: detected capacity change from 0 to 230200836096 [ 5.549484] md2: unknown partition table [ 5.557663] md: raid10 personality registered for level 10 [ 5.985409] EXT4-fs (dm-1): INFO: recovery required on readonly filesystem [ 5.992487] EXT4-fs (dm-1): write access will be enabled during recovery [ 6.998484] EXT4-fs (dm-1): recovery complete [ 7.027954] EXT4-fs (dm-1): mounted filesystem with ordered data mode [ 13.361407] udev: starting version 151 [ 13.438708] Adding 15622136k swap on /dev/mapper/vg--grp--01--23--02--1-LogVol00. Priority:-1 extents:1 across:15622136k [ 13.498375] Adding 18841592k swap on /dev/mapper/VolGroup00-LogVol00. Priority:-2 extents:1 across:18841592k [ 13.659203] ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f] [ 13.660808] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 13.880296] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 0 ss_did 0 [ 13.880301] shpchp 0000:00:01.0: Cannot reserve MMIO region [ 13.886202] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 14.018078] EDAC MC: Ver: 2.1.0 May 6 2010 [ 14.453529] EDAC amd64_edac: Ver: 3.2.0 May 6 2010 [ 14.453645] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). [ 14.453661] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 14.453662] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 14.453664] (Note that use of the override may cause unknown side effects.) [ 14.453681] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 14.959017] Bridge firewalling registered [ 14.969220] device eth0 entered promiscuous mode [ 14.971470] r8169: eth0: link up [ 14.971485] r8169: eth0: link up [ 14.980755] br0: port 1(eth0) entering learning state [ 15.211165] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4 [ 15.258949] lp: driver loaded but no devices found [ 15.287297] kjournald starting. Commit interval 5 seconds [ 15.313133] EXT3 FS on md4, internal journal [ 15.313141] EXT3-fs: mounted filesystem with ordered data mode. [ 15.423576] [drm] Initialized drm 1.1.0 20060810 [ 15.480316] ttyS0: LSR safety check engaged! [ 15.481673] ttyS0: LSR safety check engaged!