__ __ _ _ ___ ___ ___ \ \/ /___ _ __ | || | / _ \ / _ \ _ __ ___( _ ) \ // _ \ '_ \ | || |_| | | | | | |__| '__/ __/ _ \ / \ __/ | | | |__ _| |_| | |_| |__| | | (_| (_) | /_/\_\___|_| |_| |_|(_)___(_)___/ |_| \___\___/ (XEN) Xen version 4.0.0-rc8 (root@) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) Sat Apr 24 11:56:47 EDT 2010 (XEN) Latest ChangeSet: Fri Mar 26 10:29:38 2010 +0000 21074:542211ba675c (XEN) Console output is synchronous. (XEN) Command line: dummy=dummy dom0_mem=1024M vga=text-80x50 loglvl=all guest_loglvl=all sync_console console_to_rin1 (XEN) Video information: (XEN) VGA is text mode 80x50, font 8x8 (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds (XEN) EDID info not retrieved because of reasons unknown (XEN) Disc information: (XEN) Found 6 MBR signatures (XEN) Found 6 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009f800 (usable) (XEN) 000000000009f800 - 00000000000a0000 (reserved) (XEN) 00000000000f0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000afde0000 (usable) (XEN) 00000000afde0000 - 00000000afde3000 (ACPI NVS) (XEN) 00000000afde3000 - 00000000afdf0000 (ACPI data) (XEN) 00000000afdf0000 - 00000000afe00000 (reserved) (XEN) 00000000e0000000 - 00000000f0000000 (reserved) (XEN) 00000000fec00000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 0000000230000000 (usable) (XEN) ACPI: RSDP 000F75D0, 0014 (r0 GBT ) (XEN) ACPI: RSDT AFDE3000, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) (XEN) ACPI: FACP AFDE3040, 0074 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) (XEN) ACPI: DSDT AFDE30C0, 6E65 (r1 GBT GBTUACPI 1000 MSFT 3000000) (XEN) ACPI: FACS AFDE0000, 0040 (XEN) ACPI: HPET AFDEA000, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 98) (XEN) ACPI: MCFG AFDEA040, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101) (XEN) ACPI: TAMG AFDEA080, 030A (r1 GBT GBT B0 5455312E BG53450101) (XEN) ACPI: APIC AFDE9F40, 0084 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) (XEN) System RAM: 7433MB (7612124kB) (XEN) No NUMA configuration found (XEN) Faking a node at 0000000000000000-0000000230000000 (XEN) Domain heap initialised (XEN) found SMP MP-table at 000f5c30 (XEN) DMI 2.4 present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x4008 (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[4004,0], pm1x_evt[4000,0] (XEN) ACPI: wakeup_vec[afde000c], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) (XEN) Processor #0 0:4 APIC version 16 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) (XEN) Processor #1 0:4 APIC version 16 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) (XEN) Processor #2 0:4 APIC version 16 (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) (XEN) Processor #3 0:4 APIC version 16 (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) (XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) ACPI: HPET id: 0x10b9a201 base: 0xfed00000 (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 (XEN) PCI: MCFG area at e0000000 reserved in E820 (XEN) Using ACPI (MADT) for SMP configuration information (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 3013.821 MHz processor. (XEN) Initing memory sharing. (XEN) HVM: ASIDs enabled. (XEN) HVM: SVM enabled (XEN) HVM: Hardware Assisted Paging detected. (XEN) AMD Fam10h machine check reporting enabled (XEN) AMD-Vi: IOMMU not found! (XEN) I/O virtualisation disabled (XEN) Total of 4 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) TSC is reliable, synchronization unnecessary (XEN) Platform timer is 14.318MHz HPET �(XEN) Allocated console ring of 32 KiB. (XEN) do_IRQ: 1.231 No irq handler for vector (irq -1) (XEN) do_IRQ: 3.231 No irq handler for vector (irq -1) (XEN) microcode.c:73:d32767 microcode: CPU1 resumed (XEN) do_IRQ: 2.231 No irq handler for vector (irq -1) (XEN) microcode.c:73:d32767 microcode: CPU3 resumed (XEN) Brought up 4 CPUs (XEN) microcode.c:73:d32767 microcode: CPU2 resumed (XEN) HPET: 4 timers in total, 3 timers will be used for broadcast (XEN) ACPI sleep modes: S3 (XEN) MCA: Use hw thresholding to adjust polling frequency (XEN) mcheck_poll: Machine check polling timer started. (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1a72000 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 0000000210000000->0000000220000000 (196608 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff81000000->ffffffff81a72000 (XEN) Init. ramdisk: ffffffff81a72000->ffffffff8f7d1600 (XEN) Phys-Mach map: ffffffff8f7d2000->ffffffff8f9d2000 (XEN) Start info: ffffffff8f9d2000->ffffffff8f9d24b4 (XEN) Page tables: ffffffff8f9d3000->ffffffff8fa54000 (XEN) Boot stack: ffffffff8fa54000->ffffffff8fa55000 (XEN) TOTAL: ffffffff80000000->ffffffff8fc00000 (XEN) ENTRY ADDRESS: ffffffff81879200 (XEN) Dom0 has maximum 4 VCPUs (XEN) Scrubbing Free RAM: ..................................................................done. (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: All (XEN) Guest Loglevel: All (XEN) ********************************************** (XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS (XEN) ******* This option is intended to aid debugging of Xen by ensuring (XEN) ******* that all output is synchronously delivered on the serial line. (XEN) ******* However it can introduce SIGNIFICANT latencies and affect (XEN) ******* timekeeping. It is NOT recommended for production use! (XEN) ********************************************** (XEN) 3... 2... 1... (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 164kB init memory. mapping kernel into physical memory Xen: setup ISA identity maps about to get started... [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32.10 (root@grp-01-23-02) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #12 SMP Sat Apr0 [ 0.000000] Command line: root=/dev/mapper/vg--grp--01--23--02--2-LogVol00 dummy=dummy ro earlyprintk=xen console=hvt [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] xen_release_chunk: looking at area pfn 40000-afde0: 0 pages freed [ 0.000000] xen_release_chunk: looking at area pfn afe00-e0000: 0 pages freed [ 0.000000] xen_release_chunk: looking at area pfn f0000-fec00: 0 pages freed [ 0.000000] released 0 pages of unused memory [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] Xen: 000000000009f800 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 0000000040000000 (usable) [ 0.000000] Xen: 00000000afde0000 - 00000000afde3000 (ACPI NVS) [ 0.000000] Xen: 00000000afde3000 - 00000000afdf0000 (ACPI data) [ 0.000000] Xen: 00000000afdf0000 - 00000000afe00000 (reserved) [ 0.000000] Xen: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] Xen: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] bootconsole [xenboot0] enabled [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x40000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 0000000040000000 (usable) [ 0.000000] modified: 00000000afde0000 - 00000000afde3000 (ACPI NVS) [ 0.000000] modified: 00000000afde3000 - 00000000afdf0000 (ACPI data) [ 0.000000] modified: 00000000afdf0000 - 00000000afe00000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] init_memory_mapping: 0000000000000000-0000000040000000 [ 0.000000] RAMDISK: 01a72000 - 0f7d1600 [ 0.000000] ACPI: RSDP 00000000000f75d0 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000afde3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000afde3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000afde30c0 06E65 (v01 GBT GBTUACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000afde0000 00040 [ 0.000000] ACPI: HPET 00000000afdea000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000afdea040 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: TAMG 00000000afdea080 0030A (v01 GBT GBT B0 5455312E BG?? 53450101) [ 0.000000] ACPI: APIC 00000000afde9f40 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000040000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000040000000 [ 0.000000] NODE_DATA [0000000000008000 - 000000000000cfff] [ 0.000000] bootmap [000000000000d000 - 0000000000014fff] pages 8 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0040000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [000f9d3000 - 000fa54000] XEN PAGETABLES ==> [000f9d3000 - 000fa54000] [ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #3 [0001000000 - 0001a51864] TEXT DATA BSS ==> [0001000000 - 0001a51864] [ 0.000000] #4 [0001a72000 - 000f7d1600] RAMDISK ==> [0001a72000 - 000f7d1600] [ 0.000000] #5 [000f7d2000 - 000f9d3000] XEN START INFO ==> [000f7d2000 - 000f9d3000] [ 0.000000] #6 [0001a52000 - 0001a520fe] BRK ==> [0001a52000 - 0001a520fe] [ 0.000000] #7 [0000100000 - 000027e000] PGTABLE ==> [0000100000 - 000027e000] [ 0.000000] found SMP MP-table at [ffff8800000f5c30] f5c30 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00040000 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-0 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:6fde0000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.0.0-rc8 (preserve-AD) (dom0) [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88000fa8a000 s91416 r8192 d23272 u122880 [ 0.000000] pcpu-alloc: s91416 r8192 d23272 u122880 alloc=30*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Xen: using vcpu_info placement [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 258073 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=/dev/mapper/vg--grp--01--23--02--2-LogVol00 dummy=dummy ro earlyprintk=xen cont [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] DMA: Placing 64MB software IO TLB between ffff880010c3f000 - ffff880014c3f000 [ 0.000000] DMA: software IO TLB at phys 0x10c3f000 - 0x14c3f000 [ 0.000000] xen_swiotlb_fixup: buf=ffff880010c3f000 size=67108864 [ 0.000000] xen_swiotlb_fixup: buf=ffff880014c9f000 size=32768 [ 0.000000] Memory: 725700k/1048576k available (5523k kernel code, 408k absent, 322468k reserved, 3053k data, 800k i) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:1280 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=3 [ 0.000000] xen_allocate_pirq: returning irq 9 for gsi 9 [ 0.000000] Already setup the GSI :9 [ 0.000000] xen: acpi sci 9 [ 0.000000] Console: colour VGA+ 80x50 [ 0.000000] console [tty0] enabled, bootconsole disabled [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32.10 (root@grp-01-23-02) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #12 SMP Sat Apr0 [ 0.000000] Command line: root=/dev/mapper/vg--grp--01--23--02--2-LogVol00 dummy=dummy ro earlyprintk=xen console=hvt [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] xen_release_chunk: looking at area pfn 40000-afde0: 0 pages freed [ 0.000000] xen_release_chunk: looking at area pfn afe00-e0000: 0 pages freed [ 0.000000] xen_release_chunk: looking at area pfn f0000-fec00: 0 pages freed [ 0.000000] released 0 pages of unused memory [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] Xen: 000000000009f800 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 0000000040000000 (usable) [ 0.000000] Xen: 00000000afde0000 - 00000000afde3000 (ACPI NVS) [ 0.000000] Xen: 00000000afde3000 - 00000000afdf0000 (ACPI data) [ 0.000000] Xen: 00000000afdf0000 - 00000000afe00000 (reserved) [ 0.000000] Xen: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] Xen: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] bootconsole [xenboot0] enabled [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x40000 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable) [ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 0000000040000000 (usable) [ 0.000000] modified: 00000000afde0000 - 00000000afde3000 (ACPI NVS) [ 0.000000] modified: 00000000afde3000 - 00000000afdf0000 (ACPI data) [ 0.000000] modified: 00000000afdf0000 - 00000000afe00000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] init_memory_mapping: 0000000000000000-0000000040000000 [ 0.000000] RAMDISK: 01a72000 - 0f7d1600 [ 0.000000] ACPI: RSDP 00000000000f75d0 00014 (v00 GBT ) [ 0.000000] ACPI: RSDT 00000000afde3000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 00000000afde3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 00000000afde30c0 06E65 (v01 GBT GBTUACPI 00001000 MSFT 03000000) [ 0.000000] ACPI: FACS 00000000afde0000 00040 [ 0.000000] ACPI: HPET 00000000afdea000 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 00000000afdea040 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: TAMG 00000000afdea080 0030A (v01 GBT GBT B0 5455312E BG?? 53450101) [ 0.000000] ACPI: APIC 00000000afde9f40 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000040000000 [ 0.000000] Bootmem setup node 0 0000000000000000-0000000040000000 [ 0.000000] NODE_DATA [0000000000008000 - 000000000000cfff] [ 0.000000] bootmap [000000000000d000 - 0000000000014fff] pages 8 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0040000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [000f9d3000 - 000fa54000] XEN PAGETABLES ==> [000f9d3000 - 000fa54000] [ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #3 [0001000000 - 0001a51864] TEXT DATA BSS ==> [0001000000 - 0001a51864] [ 0.000000] #4 [0001a72000 - 000f7d1600] RAMDISK ==> [0001a72000 - 000f7d1600] [ 0.000000] #5 [000f7d2000 - 000f9d3000] XEN START INFO ==> [000f7d2000 - 000f9d3000] [ 0.000000] #6 [0001a52000 - 0001a520fe] BRK ==> [0001a52000 - 0001a520fe] [ 0.000000] #7 [0000100000 - 000027e000] PGTABLE ==> [0000100000 - 000027e000] [ 0.000000] found SMP MP-table at [ffff8800000f5c30] f5c30 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000001 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x00040000 [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-0 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:6fde0000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.0.0-rc8 (preserve-AD) (dom0) [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff88000fa8a000 s91416 r8192 d23272 u122880 [ 0.000000] pcpu-alloc: s91416 r8192 d23272 u122880 alloc=30*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Xen: using vcpu_info placement [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 258073 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=/dev/mapper/vg--grp--01--23--02--2-LogVol00 dummy=dummy ro earlyprintk=xen cont [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] DMA: Placing 64MB software IO TLB between ffff880010c3f000 - ffff880014c3f000 [ 0.000000] DMA: software IO TLB at phys 0x10c3f000 - 0x14c3f000 [ 0.000000] xen_swiotlb_fixup: buf=ffff880010c3f000 size=67108864 [ 0.000000] xen_swiotlb_fixup: buf=ffff880014c9f000 size=32768 [ 0.000000] Memory: 725700k/1048576k available (5523k kernel code, 408k absent, 322468k reserved, 3053k data, 800k i) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:1280 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] xen: sci override: source_irq=9 global_irq=9 trigger=c polarity=3 [ 0.000000] xen_allocate_pirq: returning irq 9 for gsi 9 [ 0.000000] Already setup the GSI :9 [ 0.000000] xen: acpi sci 9 [ 0.000000] Console: colour VGA+ 80x50 [ 0.000000] console [tty0] enabled, bootconsole disabled [ 0.000000] console [hvc0] enabled [ 0.000000] allocated 10485760 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] installing Xen timer for CPU 0 (XEN) traps.c:2309:d0 Domain attempted WRMSR 00000000c0010004 from 00000270:e8597444 to 00000000:00000000. (XEN) traps.c:2309:d0 Domain attempted WRMSR 00000000c0010000 from 00000000:00030076 to 00000000:00430076. [ 0.000000] Detected 3579879.094 MHz processor. [ 0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6027.64 BogoMIPS (lpj=3013820) [ 0.010031] Security Framework initialized [ 0.014199] SELinux: Disabled at boot. [ 0.018367] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.020085] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.027303] Mount-cache hash table entries: 256 [ 0.030138] Initializing cgroup subsys ns [ 0.034191] Initializing cgroup subsys cpuacct [ 0.038774] Initializing cgroup subsys memory [ 0.040000] Initializing cgroup subsys devices [ 0.040000] Initializing cgroup subsys freezer [ 0.040000] Initializing cgroup subsys net_cls [ 0.040025] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.047277] CPU: L2 Cache: 512K (64 bytes/line) [ 0.050000] CPU 0/0x0 -> Node 0 [ 0.050006] CPU: Physical Processor ID: 0 [ 0.054124] CPU: Processor Core ID: 0 [ 0.057947] Performance Events: AMD PMU driver. [ 0.060000] ------------[ cut here ]------------ [ 0.060000] WARNING: at arch/x86/xen/enlighten.c:722 xen_apic_write+0x1a/0x20() [ 0.060000] Hardware name: GA-MA790GP-UD4H [ 0.060000] Modules linked in: [ 0.060000] Pid: 0, comm: swapper Not tainted 2.6.32.10 #12 [ 0.060000] Call Trace: [ 0.060000] [] warn_slowpath_common+0x7b/0xc0 [ 0.060000] [] warn_slowpath_null+0x14/0x20 [ 0.060000] [] xen_apic_write+0x1a/0x20 [ 0.060000] [] perf_events_lapic_init+0x36/0x40 [ 0.060000] [] init_hw_perf_events+0x311/0x3ae [ 0.060000] [] identify_boot_cpu+0x3c/0x3e [ 0.060000] [] check_bugs+0x9/0x2d [ 0.060000] [] start_kernel+0x3d7/0x3f7 [ 0.060000] [] x86_64_start_reservations+0x125/0x129 [ 0.060000] [] xen_start_kernel+0x6ab/0x6b2 [ 0.060007] ---[ end trace a7919e7f17c0a725 ]--- [ 0.064773] ... version: 0 [ 0.068914] ... bit width: 48 [ 0.070000] ... generic registers: 4 [ 0.070000] ... value mask: 0000ffffffffffff [ 0.070000] ... max period: 00007fffffffffff [ 0.070000] ... fixed-purpose events: 0 [ 0.070000] ... event mask: 000000000000000f [ 0.070000] SMP alternatives: switching to UP code [ 0.070000] ACPI: Core revision 20090903 [ 0.080046] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.085906] ftrace: allocating 21751 entries in 86 pages [ 0.090081] cpu 0 spinlock event irq 1278 [ 0.095201] installing Xen timer for CPU 1 [ 0.099408] cpu 1 spinlock event irq 1272 [ 0.100021] SMP alternatives: switching to SMP code [ 0.000017] Initializing CPU#1 [ 0.000063] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.000065] CPU: L2 Cache: 512K (64 bytes/line) [ 0.000067] CPU 1/0x0 -> Node 0 [ 0.000069] CPU: Physical Processor ID: 0 [ 0.000070] CPU: Processor Core ID: 1 [ 0.110190] installing Xen timer for CPU 2 [ 0.120013] cpu 2 spinlock event irq 1266 [ 0.000014] Initializing CPU#2 [ 0.000066] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.000069] CPU: L2 Cache: 512K (64 bytes/line) [ 0.000071] CPU 2/0x0 -> Node 0 [ 0.000073] CPU: Physical Processor ID: 0 [ 0.000074] CPU: Processor Core ID: 3 [ 0.124284] installing Xen timer for CPU 3 [ 0.130013] cpu 3 spinlock event irq 1260 [ 0.000014] Initializing CPU#3 [ 0.000059] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.000062] CPU: L2 Cache: 512K (64 bytes/line) [ 0.000064] CPU 3/0x0 -> Node 0 [ 0.000066] CPU: Physical Processor ID: 0 [ 0.000067] CPU: Processor Core ID: 2 [ 0.134281] Brought up 4 CPUs [ 0.140143] devtmpfs: initialized [ 0.144593] Grant table initialized [ 0.148145] regulator: core version 0.5 [ 0.150000] Time: 23:47:59 Date: 05/04/10 [ 0.150039] NET: Registered protocol family 16 [ 0.154689] TOM: 00000000d0000000 aka 3328M [ 0.158954] TOM2: 0000000230000000 aka 8960M [ 0.160033] ACPI: bus type pci registered [ 0.164136] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.170000] PCI: MCFG area at e0000000 reserved in E820 [ 0.199638] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.200000] PCI: Using configuration type 1 for base access [ 0.200710] bio: create slab at 0 [ 0.205749] ERROR: Unable to locate IOAPIC for GSI 9 [ 0.219518] ACPI: Interpreter enabled [ 0.220000] ACPI: (supports S0 S1 S4 S5) [ 0.220000] ACPI: Using IOAPIC for interrupt routing [ 0.224951] ACPI: No dock devices found. [ 0.229090] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.230257] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.236426] pci 0000:00:0a.0: PME# disabled [ 0.240432] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.246533] pci 0000:00:12.2: PME# disabled [ 0.250288] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.256422] pci 0000:00:13.2: PME# disabled [ 0.260345] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.266527] pci 0000:00:14.2: PME# disabled [ 0.270791] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.277532] pci 0000:02:00.0: PME# disabled [ 0.280250] pci 0000:03:0e.0: PME# supported from D0 D1 D2 D3hot [ 0.286384] pci 0000:03:0e.0: PME# disabled [ 0.290038] pci 0000:00:14.4: transparent bridge (XEN) PCI add device 00:00.0 (XEN) PCI add device 00:01.0 (XEN) PCI add device 00:0a.0 (XEN) PCI add device 00:11.0 (XEN) PCI add device 00:12.0 (XEN) PCI add device 00:12.1 (XEN) PCI add device 00:12.2 (XEN) PCI add device 00:13.0 (XEN) PCI add device 00:13.1 (XEN) PCI add device 00:13.2 (XEN) PCI add device 00:14.0 (XEN) PCI add device 00:14.1 (XEN) PCI add device 00:14.2 (XEN) PCI add device 00:14.3 (XEN) PCI add device 00:14.4 (XEN) PCI add device 00:14.5 (XEN) PCI add device 00:18.0 (XEN) PCI add device 00:18.1 (XEN) PCI add device 00:18.2 (XEN) PCI add device 00:18.3 (XEN) PCI add device 00:18.4 (XEN) PCI add device 01:05.0 (XEN) PCI add device 01:05.1 (XEN) PCI add device 02:00.0 (XEN) PCI add device 03:0e.0 [ 0.367968] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.370083] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.377650] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.380080] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.387617] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.390080] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.397623] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.400081] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. [ 0.407668] xen_balloon: Initialising balloon driver with page order 0. [ 0.410069] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.418302] vgaarb: loaded [ 0.420098] SCSI subsystem initialized [ 0.424102] usbcore: registered new interface driver usbfs [ 0.429696] usbcore: registered new interface driver hub [ 0.430023] usbcore: registered new device driver usb [ 0.435271] ACPI: WMI: Mapper loaded [ 0.438914] PCI: Using ACPI for IRQ routing [ 0.440000] pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff] [ 0.440000] pci 0000:00:00.0: BAR 3: can't allocate resource [ 0.440075] NetLabel: Initializing [ 0.443576] NetLabel: domain hash size = 128 [ 0.448065] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.450000] NetLabel: unlabeled traffic allowed by default [ 0.450067] Switching to clocksource xen [ 0.454221] pnp: PnP ACPI init [ 0.454734] ACPI: bus type pnp registered [ 0.459856] xen_allocate_pirq: returning irq 8 for gsi 8 [ 0.465242] Already setup the GSI :8 [ 0.469085] xen_allocate_pirq: returning irq 13 for gsi 13 [ 0.474631] Already setup the GSI :13 [ 0.478937] xen_allocate_pirq: returning irq 4 for gsi 4 [ 0.484319] Already setup the GSI :4 [ 0.488148] xen_allocate_pirq: returning irq 12 for gsi 12 [ 0.493706] Already setup the GSI :12 [ 0.497548] xen_allocate_pirq: returning irq 1 for gsi 1 [ 0.502919] Already setup the GSI :1 [ 0.507005] pnp 00:0c: mem resource (0xd1c00-0xd3fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.512916] pnp 00:0c: mem resource (0xf0000-0xf7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.512916] pnp 00:0c: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.512916] pnp 00:0c: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.512916] pnp 00:0c: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.512916] pnp 00:0c: mem resource (0x100000-0xafddffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling [ 0.567842] pnp: PnP ACPI: found 13 devices [ 0.572091] ACPI: ACPI bus type pnp unregistered [ 0.576803] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.582083] system 00:01: ioport range 0x220-0x225 has been reserved [ 0.582083] system 00:01: ioport range 0x290-0x294 has been reserved [ 0.596331] system 00:02: ioport range 0x4100-0x411f has been reserved [ 0.603016] system 00:02: ioport range 0x228-0x22f has been reserved [ 0.606323] system 00:02: ioport range 0x40b-0x40b has been reserved [ 0.606323] system 00:02: ioport range 0x4d6-0x4d6 has been reserved [ 0.606323] system 00:02: ioport range 0xc00-0xc01 has been reserved [ 0.606323] system 00:02: ioport range 0xc14-0xc14 has been reserved [ 0.606323] system 00:02: ioport range 0xc50-0xc52 has been reserved [ 0.606323] system 00:02: ioport range 0xc6c-0xc6d has been reserved [ 0.606323] system 00:02: ioport range 0xc6f-0xc6f has been reserved [ 0.606323] system 00:02: ioport range 0xcd0-0xcd1 has been reserved [ 0.606323] system 00:02: ioport range 0xcd2-0xcd3 has been reserved [ 0.606323] system 00:02: ioport range 0xcd4-0xcdf has been reserved [ 0.606323] system 00:02: ioport range 0x4000-0x40fe has been reserved [ 0.606323] system 00:02: ioport range 0x4210-0x4217 has been reserved [ 0.606323] system 00:02: ioport range 0xb00-0xb0f has been reserved [ 0.606323] system 00:02: ioport range 0xb10-0xb1f has been reserved [ 0.700945] system 00:02: ioport range 0xb20-0xb3f has been reserved [ 0.707408] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved [ 0.714692] system 00:0c: iomem range 0xafde0000-0xafdfffff could not be reserved [ 0.722319] system 00:0c: iomem range 0xffff0000-0xffffffff has been reserved [ 0.724684] system 00:0c: iomem range 0xafef0000-0xcfeeffff has been reserved [ 0.724684] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.724684] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.724684] system 00:0c: iomem range 0xfff80000-0xfffeffff has been reserved [ 0.762269] PM-Timer failed consistency check (0x0xffffff) - aborting. [ 0.769036] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.770004] pci 0000:00:01.0: IO window: 0xe000-0xefff [ 0.770004] pci 0000:00:01.0: MEM window: 0xfde00000-0xfdffffff [ 0.770004] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.770004] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02 [ 0.770004] pci 0000:00:0a.0: IO window: 0xd000-0xdfff [ 0.770004] pci 0000:00:0a.0: MEM window: 0xfdd00000-0xfddfffff [ 0.770004] pci 0000:00:0a.0: PREFETCH window: 0x000000fda00000-0x000000fdafffff [ 0.770004] pci 0000:00:14.4: PCI bridge, secondary bus 0000:03 [ 0.770004] pci 0000:00:14.4: IO window: 0xc000-0xcfff [ 0.770004] pci 0000:00:14.4: MEM window: 0xfdc00000-0xfdcfffff [ 0.770004] pci 0000:00:14.4: PREFETCH window: 0xfdb00000-0xfdbfffff [ 0.845278] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.852161] NET: Registered protocol family 2 [ 0.856716] IP route cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.864551] TCP established hash table entries: 131072 (order: 9, 2097152 bytes) [ 0.872772] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.879884] TCP: Hash tables configured (established 131072 bind 65536) [ 0.882706] TCP reno registered [ 0.889969] NET: Registered protocol family 1 [ 0.924415] Trying to unpack rootfs image as initramfs... [ 1.130546] Freeing initrd memory: 226685k freed [ 1.229176] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.230046] DMA: Placing 64MB software IO TLB between ffff880010c3f000 - ffff880014c3f000 [ 1.230046] DMA: software IO TLB at phys 0x10c3f000 - 0x14c3f000 [ 1.250625] Scanning for low memory corruption every 60 seconds [ 1.256837] audit: initializing netlink socket (disabled) [ 1.262310] type=2000 audit(1273016881.682:1): initialized [ 1.273991] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.281733] VFS: Disk quotas dquot_6.5.2 [ 1.285789] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.292923] fuse init (API version 7.13) [ 1.296971] msgmni has been set to 1860 [ 1.301111] alg: No test for stdrng (krng) [ 1.305308] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.310887] io scheduler noop registered [ 1.310887] io scheduler anticipatory registered [ 1.310887] io scheduler deadline registered (default) [ 1.327003] io scheduler cfq registered [ 1.331295] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.337010] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.343932] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.352403] ACPI: Power Button [PWRB] [ 1.356273] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.363780] ACPI: Power Button [PWRF] [ 1.369700] Event-channel device installed. [ 1.377742] blktap_device_init: blktap device major 253 [ 1.383036] blktap_ring_init: blktap ring major: 252 [ 1.388828] registering netback [ 1.393379] hpet_acpi_add: no address or irqs in _CRS [ 1.398534] Linux agpgart interface v0.103 [ 1.402131] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.410263] brd: module loaded [ 1.413803] loop: module loaded [ 1.417122] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 1.425157] pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.432781] Fixed MDIO Bus: probed [ 1.436339] PPP generic driver version 2.4.2 [ 1.440770] tun: Universal TUN/TAP device driver, 1.6 [ 1.445900] tun: (C) 1999-2004 Max Krasnyansky [ 1.452314] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.459000] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.462246] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 1.471626] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.479226] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround [ 1.481597] ehci_hcd 0000:00:12.2: debug port 1 [ 1.481597] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000 [ 1.510037] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.515983] usb usb1: configuration #1 chosen from 1 choice [ 1.521700] hub 1-0:1.0: USB hub found [ 1.525557] hub 1-0:1.0: 6 ports detected [ 1.529766] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.531675] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 1.542439] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.550009] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround [ 1.557635] ehci_hcd 0000:00:13.2: debug port 1 [ 1.562355] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000 [ 1.580041] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.585974] usb usb2: configuration #1 chosen from 1 choice [ 1.591636] hub 2-0:1.0: USB hub found [ 1.595514] hub 2-0:1.0: 6 ports detected [ 1.599698] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.606018] xen_allocate_pirq: returning irq 16 for gsi 16 [ 1.611603] Already setup the GSI :16 [ 1.615358] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.621600] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 1.628062] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.635645] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000 [ 1.684112] usb usb3: configuration #1 chosen from 1 choice [ 1.689773] hub 3-0:1.0: USB hub found [ 1.693666] hub 3-0:1.0: 3 ports detected [ 1.697909] xen_allocate_pirq: returning irq 16 for gsi 16 [ 1.703488] Already setup the GSI :16 [ 1.707224] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.713483] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 1.719923] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 1.760108] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000 [ 1.824190] usb usb4: configuration #1 chosen from 1 choice [ 1.829953] hub 4-0:1.0: USB hub found [ 1.833860] hub 4-0:1.0: 3 ports detected [ 1.838107] xen_allocate_pirq: returning irq 18 for gsi 18 [ 1.843780] Already setup the GSI :18 [ 1.847576] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.853775] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.860628] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 1.900141] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000 [ 1.964199] usb usb5: configuration #1 chosen from 1 choice [ 1.969965] hub 5-0:1.0: USB hub found [ 1.973951] hub 5-0:1.0: 3 ports detected [ 1.978206] xen_allocate_pirq: returning irq 18 for gsi 18 [ 1.983878] Already setup the GSI :18 [ 1.987765] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.993874] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 2.000826] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 2.040121] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000 [ 2.104190] usb usb6: configuration #1 chosen from 1 choice [ 2.110005] hub 6-0:1.0: USB hub found [ 2.113995] hub 6-0:1.0: 3 ports detected [ 2.118353] xen_allocate_pirq: returning irq 18 for gsi 18 [ 2.124017] Already setup the GSI :18 [ 2.127888] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.134011] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 2.140853] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 2.180112] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000 [ 2.244195] usb usb7: configuration #1 chosen from 1 choice [ 2.250033] hub 7-0:1.0: USB hub found [ 2.254000] hub 7-0:1.0: 2 ports detected [ 2.258274] uhci_hcd: USB Universal Host Controller Interface driver [ 2.264988] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.273350] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.278456] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.283766] mice: PS/2 mouse device common for all mice [ 2.289239] rtc_cmos 00:05: RTC can wake from S4 [ 2.294095] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 2.300519] rtc0: alarms up to one month, 242 bytes nvram [ 2.306267] device-mapper: uevent: version 1.0.3 [ 2.311045] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx [ 2.319921] device-mapper: multipath: version 1.1.0 loaded [ 2.325539] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.332609] cpuidle: using governor ladder [ 2.336815] cpuidle: using governor menu [ 2.341098] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 2.341322] TCP cubic registered [ 2.341420] NET: Registered protocol family 10 [ 2.341867] lo: Disabled Privacy Extensions [ 2.342109] NET: Registered protocol family 17 [ 2.368274] powernow-k8: Found 1 AMD Phenom(tm) II X4 940 Processor processors (4 cpu cores) (version 2.20.00) [ 2.378629] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found. [ 2.378630] [Firmware Bug]: powernow-k8: Try again with latest BIOS. [ 2.393097] registered taskstats version 1 [ 2.397725] Magic number: 10:968:806 [ 2.401706] rtc_cmos 00:05: setting system clock to 2010-05-04 23:48:02 UTC (1273016882) [ 2.410082] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.411678] EDD information not available. [ 2.420862] Freeing unused kernel memory: 800k freed [ 2.426201] Write protecting the kernel read-only data: 7796k [ 2.466932] udev: starting version 151 [ 2.485935] md: linear personality registered for level -1 [ 2.531017] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 2.538168] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 2.540011] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 2.572272] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.578074] xen_allocate_pirq: returning irq 18 for gsi 18 [ 2.583868] Already setup the GSI :18 [ 2.587711] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.595713] eth0: RTL8168c/8111c at 0xffffc900001ee000, 00:24:1d:19:05:df, XID 1c4000c0 IRQ 1251 [ 2.608296] xen_allocate_pirq: returning irq 22 for gsi 22 [ 2.614107] Already setup the GSI :22 [ 2.617916] ohci1394 0000:03:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 2.633818] md: multipath personality registered for level -4 [ 2.642652] scsi0 : ahci [ 2.645423] scsi1 : ahci [ 2.648183] scsi2 : ahci [ 2.650992] scsi3 : ahci [ 2.653750] scsi4 : ahci [ 2.656424] scsi5 : ahci [ 2.659292] ata1: SATA max UDMA/133 irq_stat 0x00400000, PHY RDY changed irq 22 [ 2.666799] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 [ 2.674553] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 [ 2.682239] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 [ 2.689821] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 22 [ 2.691136] md: raid0 personality registered for level 0 [ 2.692230] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 22 [ 2.710642] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[fdcff000-fdcff7ff] Max Packet=[2048] IR/IT co] [ 2.722893] scsi6 : pata_atiixp [ 2.726262] scsi7 : pata_atiixp [ 2.730653] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14 [ 2.732343] md: raid1 personality registered for level 1 [ 2.740005] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15 [ 2.940512] ata7.01: ATAPI: HL-DT-STDVD-ROM GDR8164B, 0L06, max UDMA/33 [ 2.980480] ata7.01: configured for UDMA/33 [ 3.280065] ata2: softreset failed (device not ready) [ 3.285263] ata2: applying SB600 PMP SRST workaround and retrying [ 3.291611] ata4: softreset failed (device not ready) [ 3.291637] ata5: softreset failed (device not ready) [ 3.291640] ata5: applying SB600 PMP SRST workaround and retrying [ 3.291669] ata3: softreset failed (device not ready) [ 3.291671] ata3: applying SB600 PMP SRST workaround and retrying [ 3.291708] ata6: softreset failed (device not ready) [ 3.291710] ata6: applying SB600 PMP SRST workaround and retrying [ 3.301603] ata4: applying SB600 PMP SRST workaround and retrying [ 3.490054] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.490074] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.500059] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.500101] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.515570] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.522156] ata4.00: ATA-8: Hitachi HDT721025SLA380, STBOA31B, max UDMA/133 [ 3.522300] ata3.00: ATA-8: Hitachi HDT721025SLA380, STBOA31B, max UDMA/133 [ 3.522303] ata3.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 3.523434] ata3.00: configured for UDMA/133 [ 3.526116] ata6.00: ATA-8: Hitachi HDP725050GLA360, GM4OA5CA, max UDMA/133 [ 3.526118] ata6.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 3.527129] ata6.00: configured for UDMA/133 [ 3.542295] ata2.00: ATA-8: Hitachi HDT721025SLA380, STBOA31B, max UDMA/133 [ 3.542297] ata2.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 3.543399] ata2.00: configured for UDMA/133 [ 3.545940] ata5.00: ATA-8: Hitachi HDP725050GLA360, GM4OA5CA, max UDMA/133 [ 3.545942] ata5.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 3.546929] ata5.00: configured for UDMA/133 [ 3.532150] ata4.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 3.613341] ata4.00: configured for UDMA/133 [ 3.770050] ata1: softreset failed (device not ready) [ 3.775188] ata1: applying SB600 PMP SRST workaround and retrying [ 3.950042] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.982972] ata1.00: ATA-8: Hitachi HDT721025SLA380, STBOA31B, max UDMA/133 [ 3.990140] ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 3.998504] ata1.00: configured for UDMA/133 [ 4.020125] scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72102 STBO PQ: 0 ANSI: 5 [ 4.028570] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.034183] scsi 1:0:0:0: Direct-Access ATA Hitachi HDT72102 STBO PQ: 0 ANSI: 5 [ 4.035981] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 4.036027] sd 0:0:0:0: [sda] Write Protect is off [ 4.036052] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.036178] sda: [ 4.056980] sda1 sda2 sda3 [ 4.068876] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 4.068881] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 4.068924] sd 1:0:0:0: [sdb] Write Protect is off [ 4.068949] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.069060] sdb: [ 4.069148] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.091224] sdb1 sdb2 sdb3 [ 4.105355] scsi 2:0:0:0: Direct-Access ATA Hitachi HDT72102 STBO PQ: 0 ANSI: 5 [ 4.105424] sd 1:0:0:0: [sdb] Attached SCSI disk [ 4.118303] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 4.118310] sd 2:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 4.118352] sd 2:0:0:0: [sdc] Write Protect is off [ 4.118375] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.118493] sdc: sdc1 [ 4.147669] scsi 3:0:0:0: Direct-Access ATA Hitachi HDT72102 STBO PQ: 0 ANSI: 5 [ 4.147719] sd 2:0:0:0: [sdc] Attached SCSI disk [ 4.160577] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 4.160586] sd 3:0:0:0: [sdd] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 4.160628] sd 3:0:0:0: [sdd] Write Protect is off [ 4.160651] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.160771] sdd: sdd1 [ 4.189922] scsi 4:0:0:0: Direct-Access ATA Hitachi HDP72505 GM4O PQ: 0 ANSI: 5 [ 4.189994] sd 3:0:0:0: [sdd] Attached SCSI disk [ 4.202814] sd 4:0:0:0: Attached scsi generic sg4 type 0 [ 4.202824] sd 4:0:0:0: [sde] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 4.202866] sd 4:0:0:0: [sde] Write Protect is off [ 4.202889] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.203005] sde: sde1 sde2 sde3 [ 4.233036] scsi 5:0:0:0: Direct-Access ATA Hitachi HDP72505 GM4O PQ: 0 ANSI: 5 [ 4.233103] sd 4:0:0:0: [sde] Attached SCSI disk [ 4.246724] sd 5:0:0:0: [sdf] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 4.246724] sd 5:0:0:0: Attached scsi generic sg5 type 0 [ 4.260015] sd 5:0:0:0: [sdf] Write Protect is off [ 4.264930] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.274236] scsi 6:0:1:0: CD-ROM HL-DT-ST DVD-ROM GDR8164B 0L06 PQ: 0 ANSI: 5 [ 4.274340] sdf:sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray [ 4.296879] Uniform CD-ROM driver Revision: 3.20 [ 4.300375] sdf1 sdf2 sdf3 [ 4.304590] sr 6:0:1:0: Attached scsi generic sg6 type 5 [ 4.304617] sd 5:0:0:0: [sdf] Attached SCSI disk [ 4.476381] async_tx: api initialized (async) [ 4.482502] xor: automatically using best checksumming function: generic_sse [ 4.531271] generic_sse: 4952.800 MB/sec [ 4.532501] xor: using function: generic_sse (4952.800 MB/sec) [ 4.620552] md: bind [ 4.625595] md: bind [ 4.631938] raid1: raid set md3 active with 2 out of 2 mirrors [ 4.637911] md3: detected capacity change from 0 to 250056605696 [ 4.646749] md: bind [ 4.650471] md: bind [ 4.653337] md3: unknown partition table [ 4.658814] md: bind [ 4.662499] md: bind [ 4.665564] md: bind [ 4.672760] raid1: raid set md0 active with 2 out of 2 mirrors [ 4.678711] md0: detected capacity change from 0 to 526319616 [ 4.685618] md: bind [ 4.690493] md0: [ 4.698449] raid1: raid set md1 active with 2 out of 2 mirrors [ 4.704436] md: bind [ 4.704440] md1: detected capacity change from 0 to 19329318912 [ 4.711262] raid6: int64x1 2507 MB/s [ 4.717481] md: bind [ 4.720941] md: bind [ 4.726254] md1: unknown partition table [ 4.731241] raid1: raid set md2 active with 2 out of 2 mirrors [ 4.737236] md2: detected capacity change from 0 to 230200836096 [ 4.744078] md: bind [ 4.748474] md2: [ 4.751385] raid1: raid set md6 active with 2 out of 2 mirrors [ 4.757582] md6: detected capacity change from 0 to 483605217280 [ 4.757604] unknown partition table [ 4.770186] md6: unknown partition table [ 4.862989] md: bind [ 4.868452] raid1: raid set md4 active with 2 out of 2 mirrors [ 4.874499] md4: detected capacity change from 0 to 501612544 [ 4.880431] raid6: int64x2 3398 MB/s [ 4.884726] md: bind [ 4.888517] md4: unknown partition table [ 5.051267] raid6: int64x4 2662 MB/s [ 5.221275] raid6: int64x8 2355 MB/s [ 5.391269] raid6: sse2x1 3291 MB/s [ 5.561272] raid6: sse2x2 4935 MB/s [ 5.731269] raid6: sse2x4 4887 MB/s [ 5.733771] raid6: using algorithm sse2x2 (4935 MB/s) [ 5.746352] md: raid6 personality registered for level 6 [ 5.751576] raid1: raid set md5 active with 2 out of 2 mirrors [ 5.751612] md5: detected capacity change from 0 to 15998058496 [ 5.751554] md: raid5 personality registered for level 5 [ 5.768322] md: raid4 personality registered for level 4 [ 5.776364] md5: unknown partition table [ 5.790764] md: raid10 personality registered for level 10 [ 6.119867] EXT4-fs (dm-0): INFO: recovery required on readonly filesystem [ 6.126841] EXT4-fs (dm-0): write access will be enabled during recovery [ 6.447532] EXT4-fs (dm-0): recovery complete [ 6.476769] EXT4-fs (dm-0): mounted filesystem with ordered data mode [ 11.382063] ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f] [ 11.495395] shpchp 0000:00:01.0: Cannot reserve MMIO region fsck from util-linux-ng 2.17.2 fsck from util-linux-ng 2.17.2 init: procps main process (555) terminated with status 255 /dev/mapper/vg--grp--01--23--02--2-LogVol00: clean, 434432/29523968 files, 14057053/118067200 blocks /dev/md4 has been mounted 38 times without being checked, check forced. init: eucalyptus-network (lo) main process (1150) killed by TERM signal init: eucalyptus-network (eth0) main process (1334) killed by TERM signal /dev/md4: 220/122880 files (9.1% non-contiguous), 205802/489856 blocks init: ureadahead-other main process (1448) terminated with status 4 init: tftpd-hpa main process (1459) terminated with status 66 init: tftpd-hpa main process ended, respawning Loading the saved-state of the serial devices... /dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A [ OK ]ting sensors limits ** (process:1593): WARNING **: Could not parse config file: Could not open config file /etc/nbd-server/config. ** Message: Nothing to do! Bye! nbd-server. [ OK ]rting internet superserver inetd * Starting Postfix Mail Transport Agent postfix [ 39.003931] XENBUS: Unable to read cpu state [ 39.008413] XENBUS: Unable to read cpu state [ 39.020015] XENBUS: Unable to read cpu state [ 39.024573] XENBUS: Unable to read cpu state GR: minutes elapse until this prompt shows up: Ubuntu lucid (development branch) grp-01-23-02 hvc0 grp-01-23-02 login: