Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.32-3-xen-amd64 (Debian 2.6.32-10) (maks@xxxxxxxxxx) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Sat Mar 6 11:38:35 UTC 2010 Command line: root=/dev/mapper/dl385--64-root64 ro console=ttyS0,115200n8 console=hvc0 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000000009f400 (usable) Xen: 000000000009f400 - 0000000000100000 (reserved) Xen: 0000000000100000 - 00000000cfe3e000 (usable) Xen: 00000000cfe3e000 - 00000000cfe46000 (ACPI data) Xen: 00000000cfe46000 - 00000000cfe47000 (usable) Xen: 00000000cfe47000 - 00000000e0000000 (reserved) Xen: 00000000fec00000 - 00000000fee10000 (reserved) Xen: 00000000ffc00000 - 0000000100000000 (reserved) Xen: 0000000100000000 - 0000000800000000 (usable) DMI 2.4 present. last_pfn = 0x800000 max_arch_pfn = 0x400000000 last_pfn = 0xcfe47 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 init_memory_mapping: 0000000000000000-00000000cfe47000 0000000000 - 00cfe47000 page 4k kernel direct mapping tables up to cfe47000 @ 100000-785000 init_memory_mapping: 0000000100000000-0000000800000000 0100000000 - 0800000000 page 4k kernel direct mapping tables up to 800000000 @ ceb4000-10ed5000 RAMDISK: 0169d000 - 03047a00 ACPI: RSDP 00000000000f4f00 00024 (v02 HP ) ACPI: XSDT 00000000cfe3eec0 0009C (v01 HP ProLiant 00000002 Ò? 0000162E) ACPI: FACP 00000000cfe3efc0 000F4 (v03 HP ProLiant 00000002 Ò? 0000162E) ACPI: DSDT 00000000cfe3f0c0 0380A (v01 HP DSDT 00000001 INTL 20030228) ACPI: FACS 00000000cfe3e140 00040 ACPI: SPCR 00000000cfe3e180 00050 (v01 HP SPCRRBSU 00000001 Ò? 0000162E) ACPI: MCFG 00000000cfe3e200 0003C (v01 HP ProLiant 00000001 00000000) ACPI: HPET 00000000cfe3e240 00038 (v01 HP ProLiant 00000002 Ò? 0000162E) ACPI: SPMI 00000000cfe3e280 00040 (v05 HP ProLiant 00000001 Ò? 0000162E) ACPI: ERST 00000000cfe3e2c0 001D0 (v01 HP ProLiant 00000001 Ò? 0000162E) ACPI: APIC 00000000cfe3e4c0 000CA (v01 HP ProLiant 00000002 00000000) ACPI: SRAT 00000000cfe3e6c0 00190 (v01 AMD FAM_F_10 00000002 AMD 00000001) ACPI: FFFF 00000000cfe3eac0 00176 (v01 HP ProLiant 00000001 Ò? 0000162E) ACPI: BERT 00000000cfe3ec40 00030 (v01 HP ProLiant 00000001 Ò? 0000162E) ACPI: HEST 00000000cfe3ec80 0018C (v01 HP ProLiant 00000001 Ò? 0000162E) ACPI: FFFF 00000000cfe3ee40 00064 (v02 HP ProLiant 00000002 Ò? 0000162E) ACPI: SSDT 00000000cfe42900 002F7 (v03 HP pci0pcie 00000001 INTL 20061109) ACPI: SSDT 00000000cfe42c00 00125 (v03 HP CRSPCI0 00000002 HP 00000001) ACPI: SSDT 00000000cfe42d40 00086 (v03 HP CRSPCI1 00000002 HP 00000001) ACPI: Local APIC address 0xfee00000 SRAT: PXM 0 -> APIC 0 -> Node 0 SRAT: PXM 0 -> APIC 1 -> Node 0 SRAT: PXM 0 -> APIC 2 -> Node 0 SRAT: PXM 0 -> APIC 3 -> Node 0 SRAT: PXM 0 -> APIC 4 -> Node 0 SRAT: PXM 0 -> APIC 5 -> Node 0 SRAT: PXM 1 -> APIC 8 -> Node 1 SRAT: PXM 1 -> APIC 9 -> Node 1 SRAT: PXM 1 -> APIC 10 -> Node 1 SRAT: PXM 1 -> APIC 11 -> Node 1 SRAT: PXM 1 -> APIC 12 -> Node 1 SRAT: PXM 1 -> APIC 13 -> Node 1 SRAT: Node 0 PXM 0 0-a0000 SRAT: Node 0 PXM 0 100000-d0000000 SRAT: Node 0 PXM 0 100000000-a30000000 SRAT: Node 1 PXM 1 a30000000-1430000000 NUMA: Allocated memnodemap from 8000 - 30640 NUMA: Using 20 for the hash shift. Bootmem setup node 0 0000000000000000-0000000800000000 NODE_DATA [0000000000030640 - 000000000003863f] bootmap [0000000000717000 - 0000000000816fff] pages 100 (10 early reservations) ==> bootmem [0000000000 - 0800000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [000ce49000 - 000ceb4000] XEN PAGETABLES ==> [000ce49000 - 000ceb4000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #3 [0001000000 - 000167cc14] TEXT DATA BSS ==> [0001000000 - 000167cc14] #4 [000169d000 - 0003047a00] RAMDISK ==> [000169d000 - 0003047a00] #5 [0003048000 - 000ce49000] XEN START INFO ==> [0003048000 - 000ce49000] #6 [000167d000 - 000167d114] BRK ==> [000167d000 - 000167d114] #7 [0000100000 - 0000717000] PGTABLE ==> [0000100000 - 0000717000] #8 [000ceb4000 - 00106d0000] PGTABLE ==> [000ceb4000 - 00106d0000] #9 [0000008000 - 0000030640] MEMNODEMAP ==> [0000008000 - 0000030640] found SMP MP-table at [ffff8800000f4f80] f4f80 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00800000 Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x000cfe3e 0: 0x000cfe46 -> 0x000cfe47 0: 0x00100000 -> 0x00800000 On node 0 totalpages: 8191454 DMA zone: 56 pages used for memmap DMA zone: 1602 pages reserved DMA zone: 2341 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 833143 pages, LIFO batch:31 Normal zone: 100352 pages used for memmap Normal zone: 7239680 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x920 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x08] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x09] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x0a] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x0b] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0c] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0d] enabled) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-0 ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[16]) IOAPIC[1]: apic_id 9, version 0, address 0xfec01000, GSI 16-16 ACPI: IOAPIC (id[0x0a] address[0xfec02000] gsi_base[32]) IOAPIC[2]: apic_id 10, version 0, address 0xfec02000, GSI 32-32 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ERROR: Unable to locate IOAPIC for GSI 2 ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ERROR: Unable to locate IOAPIC for GSI 9 Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x1166a201 base: 0xfed00000 SMP: Allowing 12 CPUs, 0 hotplug CPUs nr_irqs_gsi: 288 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 PM: Registered nosave memory: 00000000cfe3e000 - 00000000cfe46000 PM: Registered nosave memory: 00000000cfe47000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fee10000 PM: Registered nosave memory: 00000000fee10000 - 00000000ffc00000 PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000 Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000) Booting paravirtualized kernel on Xen Xen version: 3.4 (preserve-AD) (dom0) NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:12 nr_node_ids:2 PERCPU: Embedded 29 pages/cpu @ffff88002804f000 s89880 r8192 d20712 u118784 pcpu-alloc: s89880 r8192 d20712 u118784 alloc=29*4096 pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07 pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 trying to map vcpu_info 0 at ffff88002805a020, mfn 10d025a, offset 32 cpu 0 using vcpu_info at ffff88002805a020 trying to map vcpu_info 1 at ffff880028077020, mfn 10d0277, offset 32 cpu 1 using vcpu_info at ffff880028077020 trying to map vcpu_info 2 at ffff880028094020, mfn 10d0294, offset 32 cpu 2 using vcpu_info at ffff880028094020 trying to map vcpu_info 3 at ffff8800280b1020, mfn 10d02b1, offset 32 cpu 3 using vcpu_info at ffff8800280b1020 trying to map vcpu_info 4 at ffff8800280ce020, mfn 10d02ce, offset 32 cpu 4 using vcpu_info at ffff8800280ce020 trying to map vcpu_info 5 at ffff8800280eb020, mfn 10d02eb, offset 32 cpu 5 using vcpu_info at ffff8800280eb020 trying to map vcpu_info 6 at ffff880028108020, mfn 10d0308, offset 32 cpu 6 using vcpu_info at ffff880028108020 trying to map vcpu_info 7 at ffff880028125020, mfn 10d0325, offset 32 cpu 7 using vcpu_info at ffff880028125020 trying to map vcpu_info 8 at ffff880028142020, mfn 10d0342, offset 32 cpu 8 using vcpu_info at ffff880028142020 trying to map vcpu_info 9 at ffff88002815f020, mfn 10d035f, offset 32 cpu 9 using vcpu_info at ffff88002815f020 trying to map vcpu_info 10 at ffff88002817c020, mfn 10d037c, offset 32 cpu 10 using vcpu_info at ffff88002817c020 trying to map vcpu_info 11 at ffff880028199020, mfn 10d0399, offset 32 cpu 11 using vcpu_info at ffff880028199020 Xen: using vcpu_info placement Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8075164 Policy zone: Normal Kernel command line: root=/dev/mapper/dl385--64-root64 ro console=ttyS0,115200n8 console=hvc0 PID hash table entries: 4096 (order: 3, 32768 bytes) Initializing CPU#0 DMA: Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 DMA: software IO TLB at phys 0x20000000 - 0x24000000 xen_swiotlb_fixup: buf=ffff880020000000 size=67108864 xen_swiotlb_fixup: buf=ffff880024060000 size=32768 Memory: 31990144k/33554432k available (3054k kernel code, 788616k absent, 775672k reserved, 1847k data, 584k init) SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=2 Hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:3072 xen: registering gsi 0 triggering 1 polarity 0 xen: --> irq=0 Already setup the GSI :0 xen: registering gsi 1 triggering 1 polarity 0 xen: --> irq=1 Already setup the GSI :1 xen: registering gsi 2 triggering 1 polarity 0 xen: --> irq=2 Already setup the GSI :2 xen: registering gsi 3 triggering 1 polarity 0 xen: --> irq=3 Already setup the GSI :3 xen: registering gsi 4 triggering 1 polarity 0 xen: --> irq=4 Already setup the GSI :4 xen: registering gsi 5 triggering 1 polarity 0 xen: --> irq=5 Already setup the GSI :5 xen: registering gsi 6 triggering 1 polarity 0 xen: --> irq=6 Already setup the GSI :6 xen: registering gsi 7 triggering 1 polarity 0 xen: --> irq=7 Already setup the GSI :7 xen: registering gsi 8 triggering 1 polarity 0 xen: --> irq=8 Already setup the GSI :8 xen: registering gsi 9 triggering 1 polarity 0 xen: --> irq=9 Already setup the GSI :9 xen: registering gsi 10 triggering 1 polarity 0 xen: --> irq=10 Already setup the GSI :10 xen: registering gsi 11 triggering 1 polarity 0 xen: --> irq=11 Already setup the GSI :11 xen: registering gsi 12 triggering 1 polarity 0 xen: --> irq=12 Already setup the GSI :12 xen: registering gsi 13 triggering 1 polarity 0 xen: --> irq=13 Already setup the GSI :13 xen: registering gsi 14 triggering 1 polarity 0 xen: --> irq=14 Already setup the GSI :14 xen: registering gsi 15 triggering 1 polarity 0 xen: --> irq=15 Already setup the GSI :15 Console: colour VGA+ 80x25 console [hvc0] enabled console [ttyS0] enabled Xen: using vcpuop timer interface installing Xen timer for CPU 0 alloc irq_desc for 288 on node 0 alloc kstat_irqs on node 0 Detected 626332.437 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5200.18 BogoMIPS (lpj=10400368) Security Framework initialized SELinux: Disabled at boot. Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0/0x0 -> Node 0 tseg: 0000000000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 Performance Events: AMD PMU driver. ------------[ cut here ]------------ WARNING: at /home/blank/debian/kernel/dists/sid/linux-2.6/debian/build/source_amd64_xen/arch/x86/xen/enlighten.c:722 init_hw_perf_events+0x2fe/0x39e() Hardware name: ProLiant DL385 G6 Modules linked in: Pid: 0, comm: swapper Not tainted 2.6.32-3-xen-amd64 #1 Call Trace: [] ? init_hw_perf_events+0x2fe/0x39e [] ? init_hw_perf_events+0x2fe/0x39e [] ? warn_slowpath_common+0x77/0xa3 [] ? init_hw_perf_events+0x2fe/0x39e [] ? identify_cpu+0x2ff/0x308 [] ? xen_restore_fl_direct_end+0x0/0x1 [] ? kmem_cache_alloc+0x8c/0xf0 [] ? identify_boot_cpu+0x15/0x3e [] ? check_bugs+0x9/0x2e [] ? start_kernel+0x3c1/0x3dc [] ? xen_start_kernel+0x638/0x63e ---[ end trace a7919e7f17c0a725 ]--- ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f SMP alternatives: switching to UP code ACPI: Core revision 20090903 alloc irq_desc for 289 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 290 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 291 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 292 on node 0 alloc kstat_irqs on node 0 installing Xen timer for CPU 1 alloc irq_desc for 293 on node 0 alloc kstat_irqs on node 0 SMP alternatives: switching to SMP code alloc irq_desc for 294 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 295 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 296 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 297 on node 0 alloc kstat_irqs on node 0 Initializing CPU#1 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1/0x0 -> Node 0 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 0 installing Xen timer for CPU 2 alloc irq_desc for 298 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 299 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 300 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 301 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 302 on node 0 alloc kstat_irqs on node 0 Initializing CPU#2 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 2/0x0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 installing Xen timer for CPU 3 alloc irq_desc for 303 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 304 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 305 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 306 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 307 on node 0 alloc kstat_irqs on node 0 Initializing CPU#3 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 3/0x0 -> Node 0 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 1 installing Xen timer for CPU 4 alloc irq_desc for 308 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 309 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 310 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 311 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 312 on node 0 alloc kstat_irqs on node 0 Initializing CPU#4 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 4/0x0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 installing Xen timer for CPU 5 alloc irq_desc for 313 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 314 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 315 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 316 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 317 on node 0 alloc kstat_irqs on node 0 Initializing CPU#5 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 5/0x0 -> Node 0 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 2 installing Xen timer for CPU 6 alloc irq_desc for 318 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 319 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 320 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 321 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 322 on node 0 alloc kstat_irqs on node 0 Initializing CPU#6 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 6/0x0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 installing Xen timer for CPU 7 alloc irq_desc for 323 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 324 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 325 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 326 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 327 on node 0 alloc kstat_irqs on node 0 Initializing CPU#7 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 7/0x0 -> Node 0 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 3 installing Xen timer for CPU 8 alloc irq_desc for 328 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 329 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 330 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 331 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 332 on node 0 alloc kstat_irqs on node 0 Initializing CPU#8 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 8/0x0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 4 installing Xen timer for CPU 9 alloc irq_desc for 333 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 334 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 335 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 336 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 337 on node 0 alloc kstat_irqs on node 0 Initializing CPU#9 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 9/0x0 -> Node 0 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 4 installing Xen timer for CPU 10 alloc irq_desc for 338 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 339 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 340 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 341 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 342 on node 0 alloc kstat_irqs on node 0 Initializing CPU#10 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 10/0x0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 5 installing Xen timer for CPU 11 alloc irq_desc for 343 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 344 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 345 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 346 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 347 on node 0 alloc kstat_irqs on node 0 Initializing CPU#11 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 11/0x0 -> Node 0 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 5 Brought up 12 CPUs CPU0 attaching sched-domain: domain 0: span 0-11 level CPU groups: 0 1 2 3 4 5 6 7 8 9 10 11 domain 1: span 0-11 level NODE groups: 0-11 (cpu_power = 12288) CPU1 attaching sched-domain: domain 0: span 0-11 level CPU groups: 1 2 3 4 5 6 7 8 9 10 11 0 domain 1: span 0-11 level NODE groups: 0-11 (cpu_power = 12288) CPU2 attaching sched-domain: domain 0: span 0-11 level CPU groups: 2 3 4 5 6 7 8 9 10 11 0 1 domain 1: span 0-11 level NODE groups: 0-11 (cpu_power = 12288) CPU3 attaching sched-domain: domain 0: span 0-11 level CPU groups: 3 4 5 6 7 8 9 10 11 0 1 2 domain 1: span 0-11 level NODE groups: 0-11 (cpu_power = 12288) CPU4 attaching sched-domain: domain 0: span 0-11 level CPU groups: 4 5 6 7 8 9 10 11 0 1 2 3 domain 1: span 0-11 level NODE groups: 0-11 (cpu_power = 12288) CPU5 attaching sched-domain: domain 0: span 0-11 level CPU groups: 5 6 7 8 9 10 11 0 1 2 3 4 domain 1: span 0-11 level NODE groups: 0-11 (cpu_power = 12288) CPU6 attaching sched-domain: domain 0: span 0-11 level CPU groups: 6 7 8 9 10 11 0 1 2 3 4 5 domain 1: span 0-11 level NODE groups: 0-11 (cpu_power = 12288) CPU7 attaching sched-domain: domain 0: span 0-11 level CPU groups: 7 8 9 10 11 0 1 2 3 4 5 6 domain 1: span 0-11 level NODE groups: 0-11 (cpu_power = 12288) CPU8 attaching sched-domain: domain 0: span 0-11 level CPU groups: 8 9 10 11 0 1 2 3 4 5 6 7 domain 1: span 0-11 level NODE groups: 0-11 (cpu_power = 12288) CPU9 attaching sched-domain: domain 0: span 0-11 level CPU groups: 9 10 11 0 1 2 3 4 5 6 7 8 domain 1: span 0-11 level NODE groups: 0-11 (cpu_power = 12288) CPU10 attaching sched-domain: domain 0: span 0-11 level CPU groups: 10 11 0 1 2 3 4 5 6 7 8 9 domain 1: span 0-11 level NODE groups: 0-11 (cpu_power = 12288) CPU11 attaching sched-domain: domain 0: span 0-11 level CPU groups: 11 0 1 2 3 4 5 6 7 8 9 10 domain 1: span 0-11 level NODE groups: 0-11 (cpu_power = 12288) devtmpfs: initialized Grant table initialized regulator: core version 0.5 NET: Registered protocol family 16 alloc irq_desc for 348 on node 0 alloc kstat_irqs on node 0 xenbus_probe_init ok node 0 link 0: io port [1000, 4fff] node 0 link 2: io port [5000, ffff] TOM: 00000000d0000000 aka 3328M Fam 10h mmconf [d0000000, dfffffff] node 0 link 0: mmio [e8000000, f7ffffff] node 0 link 2: mmio [f8000000, fdffffff] node 0 link 0: mmio [d0000000, d3ffffff] ==> none node 0 link 2: mmio [d4000000, dfffffff] ==> none node 0 link 0: mmio [a0000, bffff] TOM2: 0000001430000000 aka 82688M bus: [00,3f] on node 0 link 0 bus: 00 index 0 io port: [0, 4fff] bus: 00 index 1 mmio: [e0000000, f7ffffff] bus: 00 index 2 mmio: [a0000, bffff] bus: 00 index 3 mmio: [fe000000, ffffffff] bus: 00 index 4 mmio: [1430000000, fcffffffff] bus: [40,7f] on node 0 link 2 bus: 40 index 0 io port: [5000, ffff] bus: 40 index 1 mmio: [f8000000, fdffffff] ACPI: bus type pci registered PCI: MCFG configuration 0: base d0000000 segment 0 buses 0 - 255 PCI: MCFG area at d0000000 reserved in E820 PCI: Using MMCONFIG at d0000000 - dfffffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI Error: Field [CDW3] at 96 exceeds Buffer [NULL] size 64 (bits) (20090903/dsopcode-596) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_._OSC] (Node ffff8807ffc376c0), AE_AML_BUFFER_LIMIT ACPI: Interpreter enabled ACPI: (supports S0 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:03.0: reg 10 32bit mmio pref: [0xe8000000-0xefffffff] pci 0000:00:03.0: reg 14 io port: [0x1000-0x10ff] pci 0000:00:03.0: reg 18 32bit mmio: [0xf3ef0000-0xf3efffff] pci 0000:00:03.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] pci 0000:00:03.0: supports D1 D2 pci 0000:00:04.0: reg 10 io port: [0x2800-0x28ff] pci 0000:00:04.0: reg 14 32bit mmio: [0xf3ee0000-0xf3ee01ff] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:04.2: reg 10 io port: [0x1400-0x14ff] pci 0000:00:04.2: reg 14 32bit mmio: [0xf3ed0000-0xf3ed07ff] pci 0000:00:04.2: reg 18 32bit mmio: [0xf3ec0000-0xf3ec3fff] pci 0000:00:04.2: reg 1c 32bit mmio: [0xf3e00000-0xf3e7ffff] pci 0000:00:04.2: reg 30 32bit mmio pref: [0x000000-0x00ffff] pci 0000:00:04.2: PME# supported from D0 D3hot D3cold pci 0000:00:04.2: PME# disabled pci 0000:00:04.4: reg 20 io port: [0x1800-0x181f] pci 0000:00:04.4: PME# supported from D0 D3hot D3cold pci 0000:00:04.4: PME# disabled pci 0000:00:04.6: reg 10 32bit mmio: [0xf3df0000-0xf3df00ff] pci 0000:00:04.6: PME# supported from D0 D3hot D3cold pci 0000:00:04.6: PME# disabled pci 0000:00:05.0: Enabling HT MSI Mapping pci 0000:00:07.0: reg 10 32bit mmio: [0xf3de0000-0xf3de0fff] pci 0000:00:07.0: reg 14 io port: [0x1c00-0x1cff] pci 0000:00:07.1: reg 10 32bit mmio: [0xf3dd0000-0xf3dd0fff] pci 0000:00:07.1: reg 14 io port: [0x3000-0x30ff] pci 0000:00:07.2: reg 10 32bit mmio: [0xf3dc0000-0xf3dc0fff] pci 0000:00:07.2: reg 14 io port: [0x3400-0x34ff] pci 0000:00:07.2: supports D1 D2 pci 0000:00:07.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:07.2: PME# disabled pci 0000:00:0f.0: PME# supported from D0 D3hot D3cold pci 0000:00:0f.0: PME# disabled pci 0000:00:10.0: PME# supported from D0 D3hot D3cold pci 0000:00:10.0: PME# disabled pci 0000:00:11.0: PME# supported from D0 D3hot D3cold pci 0000:00:11.0: PME# disabled pci 0000:00:12.0: PME# supported from D0 D3hot D3cold pci 0000:00:12.0: PME# disabled pci 0000:00:13.0: PME# supported from D0 D3hot D3cold pci 0000:00:13.0: PME# disabled PCI: peer root bus 00 res updated from pci conf pci 0000:01:0e.0: reg 10 io port: [0x4000-0x4007] pci 0000:01:0e.0: reg 14 io port: [0x4008-0x400b] pci 0000:01:0e.0: reg 18 io port: [0x4010-0x4017] pci 0000:01:0e.0: reg 1c io port: [0x4018-0x401b] pci 0000:01:0e.0: reg 20 io port: [0x4020-0x402f] pci 0000:01:0e.0: reg 24 32bit mmio: [0xf3ff0000-0xf3ff1fff] pci 0000:01:0e.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] pci 0000:00:05.0: bridge io port: [0x4000-0x4fff] pci 0000:00:05.0: bridge 32bit mmio: [0xf3f00000-0xf3ffffff] pci 0000:03:00.0: reg 10 64bit mmio: [0xf6000000-0xf7ffffff] pci 0000:03:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:03:00.1: reg 10 64bit mmio: [0xf4000000-0xf5ffffff] pci 0000:03:00.1: reg 30 32bit mmio pref: [0x000000-0x00ffff] pci 0000:03:00.1: PME# supported from D0 D3hot D3cold pci 0000:03:00.1: PME# disabled pci 0000:00:12.0: bridge 32bit mmio: [0xf4000000-0xf7ffffff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPXB._PRT] ACPI: PCI Root Bridge [PCI1] (0000:40) pci 0000:40:0f.0: PME# supported from D0 D3hot D3cold pci 0000:40:0f.0: PME# disabled pci 0000:40:10.0: PME# supported from D0 D3hot D3cold pci 0000:40:10.0: PME# disabled pci 0000:40:11.0: PME# supported from D0 D3hot D3cold pci 0000:40:11.0: PME# disabled pci 0000:40:12.0: PME# supported from D0 D3hot D3cold pci 0000:40:12.0: PME# disabled pci 0000:40:13.0: PME# supported from D0 D3hot D3cold pci 0000:40:13.0: PME# disabled PCI: peer root bus 40 res updated from pci conf pci 0000:48:00.0: reg 10 64bit mmio: [0xfdc00000-0xfdffffff] pci 0000:48:00.0: reg 18 64bit mmio: [0xfdbf0000-0xfdbf0fff] pci 0000:48:00.0: reg 20 io port: [0x5000-0x50ff] pci 0000:48:00.0: reg 30 32bit mmio pref: [0x000000-0x07ffff] pci 0000:48:00.0: supports D1 pci 0000:48:00.0: PME# supported from D0 pci 0000:48:00.0: PME# disabled pci 0000:40:11.0: bridge io port: [0x5000-0x5fff] pci 0000:40:11.0: bridge 32bit mmio: [0xfdb00000-0xfdffffff] pci 0000:41:00.0: reg 10 64bit mmio: [0xfa000000-0xfbffffff] pci 0000:41:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] pci 0000:41:00.0: PME# supported from D0 D3hot D3cold pci 0000:41:00.0: PME# disabled pci 0000:41:00.1: reg 10 64bit mmio: [0xf8000000-0xf9ffffff] pci 0000:41:00.1: reg 30 32bit mmio pref: [0x000000-0x00ffff] pci 0000:41:00.1: PME# supported from D0 D3hot D3cold pci 0000:41:00.1: PME# disabled pci 0000:40:12.0: bridge 32bit mmio: [0xf8000000-0xfbffffff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.EXB0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.EXB1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.EXB2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.EXB3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.EXB4._PRT] ACPI: PCI Interrupt Link [IUSB] (IRQs *5) ACPI: PCI Interrupt Link [ISF0] (IRQs *14) ACPI: PCI Interrupt Link [IN00] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN01] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN02] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN03] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN04] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN05] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN06] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN07] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN08] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN09] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN10] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN11] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN12] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN13] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN14] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN15] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN16] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN17] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN18] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN19] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN20] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN21] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN22] (IRQs 7 *10 11) ACPI: PCI Interrupt Link [IN23] (IRQs *7 10 11) ACPI: PCI Interrupt Link [IN24] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN25] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN26] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN27] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN28] (IRQs *7 10 11) ACPI: PCI Interrupt Link [IN29] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN30] (IRQs 7 *10 11) ACPI: PCI Interrupt Link [IN31] (IRQs 7 10 11) *0, disabled. xenbus_probe_backend_init bus registered ok xenbus_probe_frontend_init bus registered ok xen_balloon: Initialising balloon driver with page order 0. vgaarb: device added: PCI:0000:00:03.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded PCI: Using ACPI for IRQ routing Switching to clocksource xen pnp: PnP ACPI init ACPI: bus type pnp registered xen: registering gsi 1 triggering 1 polarity 0 xen_allocate_pirq: returning irq 1 for gsi 1 xen: --> irq=1 Already setup the GSI :1 xen: registering gsi 12 triggering 1 polarity 0 xen_allocate_pirq: returning irq 12 for gsi 12 xen: --> irq=12 Already setup the GSI :12 xen: registering gsi 3 triggering 1 polarity 0 xen_allocate_pirq: returning irq 3 for gsi 3 xen: --> irq=3 Already setup the GSI :3 pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered system 00:01: ioport range 0x408-0x40f has been reserved system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0x4d6-0x4d6 has been reserved system 00:01: ioport range 0x310-0x311 has been reserved system 00:01: ioport range 0x900-0x9fe has been reserved system 00:01: ioport range 0xc80-0xc83 has been reserved system 00:01: ioport range 0xcd4-0xcd7 has been reserved system 00:01: ioport range 0xf50-0xf58 has been reserved system 00:01: ioport range 0x520-0x520 has been reserved system 00:01: ioport range 0x580-0x59f has been reserved system 00:01: ioport range 0x700-0x703 has been reserved system 00:01: ioport range 0xc06-0xc07 has been reserved system 00:01: ioport range 0xc14-0xc14 has been reserved system 00:01: ioport range 0xc4a-0xc4a has been reserved system 00:01: ioport range 0xc50-0xc52 has been reserved system 00:01: ioport range 0xc6c-0xc6c has been reserved system 00:01: ioport range 0xc6f-0xc6f has been reserved system 00:01: ioport range 0xca0-0xca1 has been reserved system 00:01: ioport range 0xca4-0xca5 has been reserved system 00:01: ioport range 0x3f8-0x3ff has been reserved system 00:01: iomem range 0xd0000000-0xdfffffff has been reserved pci 0000:01:0d.0: PCI bridge, secondary bus 0000:02 pci 0000:01:0d.0: IO window: disabled pci 0000:01:0d.0: MEM window: disabled pci 0000:01:0d.0: PREFETCH window: disabled pci 0000:00:05.0: PCI bridge, secondary bus 0000:01 pci 0000:00:05.0: IO window: 0x4000-0x4fff pci 0000:00:05.0: MEM window: 0xf3f00000-0xf3ffffff pci 0000:00:05.0: PREFETCH window: 0xe0000000-0xe00fffff pci 0000:00:0f.0: PCI bridge, secondary bus 0000:04 pci 0000:00:0f.0: IO window: disabled pci 0000:00:0f.0: MEM window: disabled pci 0000:00:0f.0: PREFETCH window: disabled pci 0000:00:10.0: PCI bridge, secondary bus 0000:07 pci 0000:00:10.0: IO window: disabled pci 0000:00:10.0: MEM window: disabled pci 0000:00:10.0: PREFETCH window: disabled pci 0000:00:11.0: PCI bridge, secondary bus 0000:0a pci 0000:00:11.0: IO window: disabled pci 0000:00:11.0: MEM window: disabled pci 0000:00:11.0: PREFETCH window: disabled pci 0000:00:12.0: PCI bridge, secondary bus 0000:03 pci 0000:00:12.0: IO window: disabled pci 0000:00:12.0: MEM window: 0xf4000000-0xf7ffffff pci 0000:00:12.0: PREFETCH window: 0xe0100000-0xe01fffff pci 0000:00:13.0: PCI bridge, secondary bus 0000:0d pci 0000:00:13.0: IO window: disabled pci 0000:00:13.0: MEM window: disabled pci 0000:00:13.0: PREFETCH window: disabled xen: registering gsi 42 triggering 0 polarity 1 alloc irq_desc for 42 on node 0 alloc kstat_irqs on node 0 xen: --> irq=42 pci 0000:00:0f.0: PCI INT A -> GSI 42 (level, low) -> IRQ 42 pci 0000:00:0f.0: setting latency timer to 64 xen: registering gsi 38 triggering 0 polarity 1 alloc irq_desc for 38 on node 0 alloc kstat_irqs on node 0 xen: --> irq=38 pci 0000:00:10.0: PCI INT A -> GSI 38 (level, low) -> IRQ 38 pci 0000:00:10.0: setting latency timer to 64 xen: registering gsi 39 triggering 0 polarity 1 alloc irq_desc for 39 on node 0 alloc kstat_irqs on node 0 xen: --> irq=39 pci 0000:00:11.0: PCI INT A -> GSI 39 (level, low) -> IRQ 39 pci 0000:00:11.0: setting latency timer to 64 xen: registering gsi 40 triggering 0 polarity 1 alloc irq_desc for 40 on node 0 alloc kstat_irqs on node 0 xen: --> irq=40 pci 0000:00:12.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40 pci 0000:00:12.0: setting latency timer to 64 xen: registering gsi 41 triggering 0 polarity 1 alloc irq_desc for 41 on node 0 alloc kstat_irqs on node 0 xen: --> irq=41 pci 0000:00:13.0: PCI INT A -> GSI 41 (level, low) -> IRQ 41 pci 0000:00:13.0: setting latency timer to 64 pci 0000:40:0f.0: PCI bridge, secondary bus 0000:42 pci 0000:40:0f.0: IO window: disabled pci 0000:40:0f.0: MEM window: disabled pci 0000:40:0f.0: PREFETCH window: disabled pci 0000:40:10.0: PCI bridge, secondary bus 0000:45 pci 0000:40:10.0: IO window: disabled pci 0000:40:10.0: MEM window: disabled pci 0000:40:10.0: PREFETCH window: disabled pci 0000:40:11.0: PCI bridge, secondary bus 0000:48 pci 0000:40:11.0: IO window: 0x5000-0x5fff pci 0000:40:11.0: MEM window: 0xfdb00000-0xfdffffff pci 0000:40:11.0: PREFETCH window: 0xfc000000-0xfc0fffff pci 0000:40:12.0: PCI bridge, secondary bus 0000:41 pci 0000:40:12.0: IO window: disabled pci 0000:40:12.0: MEM window: 0xf8000000-0xfbffffff pci 0000:40:12.0: PREFETCH window: 0xfc100000-0xfc1fffff pci 0000:40:13.0: PCI bridge, secondary bus 0000:4b pci 0000:40:13.0: IO window: disabled pci 0000:40:13.0: MEM window: disabled pci 0000:40:13.0: PREFETCH window: disabled xen: registering gsi 36 triggering 0 polarity 1 alloc irq_desc for 36 on node 0 alloc kstat_irqs on node 0 xen: --> irq=36 pci 0000:40:0f.0: PCI INT A -> GSI 36 (level, low) -> IRQ 36 pci 0000:40:0f.0: setting latency timer to 64 xen: registering gsi 32 triggering 0 polarity 1 alloc irq_desc for 32 on node 0 alloc kstat_irqs on node 0 xen: --> irq=32 pci 0000:40:10.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32 pci 0000:40:10.0: setting latency timer to 64 xen: registering gsi 33 triggering 0 polarity 1 alloc irq_desc for 33 on node 0 alloc kstat_irqs on node 0 xen: --> irq=33 pci 0000:40:11.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33 pci 0000:40:11.0: setting latency timer to 64 xen: registering gsi 34 triggering 0 polarity 1 alloc irq_desc for 34 on node 0 alloc kstat_irqs on node 0 xen: --> irq=34 pci 0000:40:12.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34 pci 0000:40:12.0: setting latency timer to 64 xen: registering gsi 35 triggering 0 polarity 1 alloc irq_desc for 35 on node 0 alloc kstat_irqs on node 0 xen: --> irq=35 pci 0000:40:13.0: PCI INT A -> GSI 35 (level, low) -> IRQ 35 pci 0000:40:13.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0x4fff] pci_bus 0000:00: resource 1 mem: [0xe0000000-0xf7ffffff] pci_bus 0000:00: resource 2 mem: [0x0a0000-0x0bffff] pci_bus 0000:00: resource 3 mem: [0xfe000000-0xffffffff] pci_bus 0000:00: resource 4 mem: [0x1430000000-0xfcffffffff] pci_bus 0000:01: resource 0 io: [0x4000-0x4fff] pci_bus 0000:01: resource 1 mem: [0xf3f00000-0xf3ffffff] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xe00fffff] pci_bus 0000:03: resource 1 mem: [0xf4000000-0xf7ffffff] pci_bus 0000:03: resource 2 pref mem [0xe0100000-0xe01fffff] pci_bus 0000:40: resource 0 io: [0x5000-0xffff] pci_bus 0000:40: resource 1 mem: [0xf8000000-0xfdffffff] pci_bus 0000:48: resource 0 io: [0x5000-0x5fff] pci_bus 0000:48: resource 1 mem: [0xfdb00000-0xfdffffff] pci_bus 0000:48: resource 2 pref mem [0xfc000000-0xfc0fffff] pci_bus 0000:41: resource 1 mem: [0xf8000000-0xfbffffff] pci_bus 0000:41: resource 2 pref mem [0xfc100000-0xfc1fffff] NET: Registered protocol family 2 IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:00:03.0: Boot video device pci 0000:00:04.4: HCRESET not completed yet! pci 0000:00:06.0: disabled boot interrupts on device [1166:0205] Unpacking initramfs... Freeing initrd memory: 26282k freed PCI-DMA: Using software bounce buffering for IO (SWIOTLB) DMA: Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 DMA: software IO TLB at phys 0x20000000 - 0x24000000 audit: initializing netlink socket (disabled) type=2000 audit(1268215727.959:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 32768 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) alloc irq_desc for 349 on node 0 alloc kstat_irqs on node 0 pcieport 0000:00:0f.0: setting latency timer to 64 alloc irq_desc for 350 on node 0 alloc kstat_irqs on node 0 pcieport 0000:00:10.0: setting latency timer to 64 alloc irq_desc for 351 on node 0 alloc kstat_irqs on node 0 pcieport 0000:00:11.0: setting latency timer to 64 alloc irq_desc for 352 on node 0 alloc kstat_irqs on node 0 pcieport 0000:00:12.0: setting latency timer to 64 alloc irq_desc for 353 on node 0 alloc kstat_irqs on node 0 pcieport 0000:00:13.0: setting latency timer to 64 alloc irq_desc for 354 on node 0 alloc kstat_irqs on node 0 pcieport 0000:40:0f.0: setting latency timer to 64 alloc irq_desc for 355 on node 0 alloc kstat_irqs on node 0 pcieport 0000:40:10.0: setting latency timer to 64 alloc irq_desc for 356 on node 0 alloc kstat_irqs on node 0 pcieport 0000:40:11.0: setting latency timer to 64 alloc irq_desc for 357 on node 0 alloc kstat_irqs on node 0 pcieport 0000:40:12.0: setting latency timer to 64 alloc irq_desc for 358 on node 0 alloc kstat_irqs on node 0 pcieport 0000:40:13.0: setting latency timer to 64 aer 0000:00:0f.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:00:10.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:00:11.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:00:12.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:00:13.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:40:0f.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:40:10.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:40:11.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:40:12.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:40:13.0:pcie02: AER service couldn't init device: no _OSC support registering netback alloc irq_desc for 359 on node 0 alloc kstat_irqs on node 0 hpet_acpi_add: no address or irqs in _CRS Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A input: Macintosh mouse button emulation as /devices/virtual/input/input0 PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:0a: RTC can wake from S4 rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram cpuidle: using governor ladder cpuidle: using governor menu No iBFT detected. TCP cubic registered NET: Registered protocol family 10 lo: Disabled Privacy Extensions Mobile IPv6 NET: Registered protocol family 17 PM: Resume from disk failed. registered taskstats version 1 rtc_cmos 00:0a: setting system clock to 2010-03-10 10:08:48 UTC (1268215728) Freeing unused kernel memory: 584k freed Write protecting the kernel read-only data: 4188k input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.2 (Aug 21, 2009) xen: registering gsi 40 triggering 0 polarity 1 xen_allocate_pirq: returning irq 40 for gsi 40 xen: --> irq=40 Already setup the GSI :40 bnx2 0000:03:00.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40 bnx2 0000:03:00.0: setting latency timer to 64 bnx2 0000:03:00.0: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw ACPI: PCI Interrupt Link [IUSB] enabled at IRQ 5 xen: registering gsi 5 triggering 0 polarity 1 xen_allocate_pirq: returning irq 5 for gsi 5 xen: --> irq=5 Already setup the GSI :5 ehci_hcd 0000:00:07.2: PCI INT A -> Link[IUSB] -> GSI 5 (level, low) -> IRQ 5 ehci_hcd 0000:00:07.2: EHCI Host Controller ehci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:07.2: irq 5, io mem 0xf3dc0000 SCSI subsystem initialized ehci_hcd 0000:00:07.2: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32-3-xen-amd64 ehci_hcd usb usb1: SerialNumber: 0000:00:07.2 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected libata version 3.00 loaded. sata_svw 0000:01:0e.0: version 2.3 ACPI: PCI Interrupt Link [ISF0] enabled at IRQ 14 xen: registering gsi 14 triggering 0 polarity 1 xen_allocate_pirq: returning irq 14 for gsi 14 xen: --> irq=14 Already setup the GSI :14 sata_svw 0000:01:0e.0: PCI INT A -> Link[ISF0] -> GSI 14 (level, low) -> IRQ 14 scsi0 : sata_svw scsi1 : sata_svw scsi2 : sata_svw scsi3 : sata_svw ata1: SATA max UDMA/133 mmio m8192@0xf3ff0000 port 0xf3ff0000 irq 14 ata2: SATA max UDMA/133 mmio m8192@0xf3ff0000 port 0xf3ff0100 irq 14 ata3: SATA max UDMA/133 mmio m8192@0xf3ff0000 port 0xf3ff0200 irq 14 ata4: SATA max UDMA/133 mmio m8192@0xf3ff0000 port 0xf3ff0300 irq 14 bnx2 0000:03:00.0: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver xen: registering gsi 5 triggering 0 polarity 1 xen_allocate_pirq: returning irq 5 for gsi 5 xen: --> irq=5 Already setup the GSI :5 ohci_hcd 0000:00:07.0: PCI INT A -> Link[IUSB] -> GSI 5 (level, low) -> IRQ 5 ohci_hcd 0000:00:07.0: OHCI Host Controller ohci_hcd 0000:00:07.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:07.0: irq 5, io mem 0xf3de0000 eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f6000000, IRQ 40, node addr 18:a9:05:68:49:fe xen: registering gsi 39 triggering 0 polarity 1 xen_allocate_pirq: returning irq 39 for gsi 39 xen: --> irq=39 Already setup the GSI :39 bnx2 0000:03:00.1: PCI INT B -> GSI 39 (level, low) -> IRQ 39 bnx2 0000:03:00.1: setting latency timer to 64 bnx2 0000:03:00.1: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw uhci_hcd: USB Universal Host Controller Interface driver bnx2 0000:03:00.1: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw HP CISS Driver (v 3.6.20) xen: registering gsi 33 triggering 0 polarity 1 xen_allocate_pirq: returning irq 33 for gsi 33 xen: --> irq=33 Already setup the GSI :33 cciss 0000:48:00.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33 alloc irq_desc for 360 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 361 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 362 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 363 on node 0 alloc kstat_irqs on node 0 IRQ 362/cciss0: IRQF_DISABLED is not guaranteed on shared IRQs cciss0: <0x323a> at PCI 0000:48:00.0 IRQ 362 using DAC cciss/c0d0: p1 p2 eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f4000000, IRQ 39, node addr 18:a9:05:68:4a:00 xen: registering gsi 34 triggering 0 polarity 1 xen_allocate_pirq: returning irq 34 for gsi 34 xen: --> irq=34 Already setup the GSI :34 bnx2 0000:41:00.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34 bnx2 0000:41:00.0: setting latency timer to 64 bnx2 0000:41:00.0: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.32-3-xen-amd64 ohci_hcd usb usb2: SerialNumber: 0000:00:07.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected xen: registering gsi 45 triggering 0 polarity 1 alloc irq_desc for 45 on node 0 alloc kstat_irqs on node 0 xen: --> irq=45 uhci_hcd 0000:00:04.4: PCI INT B -> GSI 45 (level, low) -> IRQ 45 uhci_hcd 0000:00:04.4: UHCI Host Controller uhci_hcd 0000:00:04.4: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:04.4: port count misdetected? forcing to 2 ports uhci_hcd 0000:00:04.4: HCRESET not completed yet! uhci_hcd 0000:00:04.4: irq 45, io base 0x00001800 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.32-3-xen-amd64 uhci_hcd usb usb3: SerialNumber: 0000:00:04.4 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected xen: registering gsi 5 triggering 0 polarity 1 xen_allocate_pirq: returning irq 5 for gsi 5 xen: --> irq=5 Already setup the GSI :5 ohci_hcd 0000:00:07.1: PCI INT A -> Link[IUSB] -> GSI 5 (level, low) -> IRQ 5 ohci_hcd 0000:00:07.1: OHCI Host Controller ohci_hcd 0000:00:07.1: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:07.1: irq 5, io mem 0xf3dd0000 bnx2 0000:41:00.0: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw eth2: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem fa000000, IRQ 34, node addr 18:a9:05:68:49:fa xen: registering gsi 33 triggering 0 polarity 1 xen_allocate_pirq: returning irq 33 for gsi 33 xen: --> irq=33 Already setup the GSI :33 bnx2 0000:41:00.1: PCI INT B -> GSI 33 (level, low) -> IRQ 33 bnx2 0000:41:00.1: setting latency timer to 64 bnx2 0000:41:00.1: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw bnx2 0000:41:00.1: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: OHCI Host Controller usb usb4: Manufacturer: Linux 2.6.32-3-xen-amd64 ohci_hcd usb usb4: SerialNumber: 0000:00:07.1 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected eth3: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f8000000, IRQ 33, node addr 18:a9:05:68:49:fc ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATAPI: Optiarc DVD RW AD-7561S, AH52, max UDMA/100 ata1.00: configured for UDMA/100 usb 3-1: new full speed USB device using uhci_hcd and address 2 usb 3-1: New USB device found, idVendor=03f0, idProduct=1027 usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 3-1: Product: Virtual Keyboard usb 3-1: Manufacturer: HP usb 3-1: configuration #1 chosen from 1 choice usb 4-1: new full speed USB device using ohci_hcd and address 2 ata1.00: qc timeout (cmd 0xa0) ata1.00: TEST_UNIT_READY failed (err_mask=0x5) ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ohci_hcd 0000:00:07.1: Unlink after no-IRQ? Controller is probably using the wrong IRQ. ata1.00: configured for UDMA/100 ata1.00: qc timeout (cmd 0xa0) ata1.00: TEST_UNIT_READY failed (err_mask=0x5) ata1: limiting SATA link speed to 1.5 Gbps ata1.00: limiting speed to UDMA/100:PIO3 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1.00: configured for UDMA/100 ata1.00: qc timeout (cmd 0xa0) ata1.00: TEST_UNIT_READY failed (err_mask=0x5) ata1.00: disabled ata1: hard resetting link ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata1: EH complete ata2: SATA link down (SStatus 4 SControl 300) ata3: SATA link down (SStatus 4 SControl 300) ata4: SATA link down (SStatus 4 SControl 300) Uniform Multi-Platform E-IDE driver usbcore: registered new interface driver hiddev input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:04.4/usb3/3-1/3-1:1.0/input/input3 generic-usb 0003:03F0:1027.0001: input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:00:04.4-1/input0 input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:04.4/usb3/3-1/3-1:1.1/input/input4 generic-usb 0003:03F0:1027.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:00:04.4-1/input1 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. udev: starting version 151 xen: registering gsi 46 triggering 0 polarity 1 alloc irq_desc for 46 on node 0 alloc kstat_irqs on node 0 xen: --> irq=46 hpwdt 0000:00:04.0: PCI INT A -> GSI 46 (level, low) -> IRQ 46 hpwdt: New timer passed in is 30 seconds. hp Watchdog Timer Driver: 1.1.1, timer margin: 30 seconds (nowayout=0), allow kernel dump: OFF (default = 0/OFF), priority: LAST (default = 0/LAST). xen: registering gsi 45 triggering 0 polarity 1 xen_allocate_pirq: returning irq 45 for gsi 45 xen: --> irq=45 Already setup the GSI :45 hpilo 0000:00:04.2: PCI INT B -> GSI 45 (level, low) -> IRQ 45 piix4_smbus 0000:00:06.0: SMBus Host Controller at 0x580, revision 0 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ipmi message handler version 39.2 [drm] Initialized drm 1.1.0 20060810 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 IPMI System Interface driver. ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0 input: PC Speaker as /devices/platform/pcspkr/input/input5 [drm] radeon defaulting to userspace modesetting. xen: registering gsi 44 triggering 0 polarity 1 alloc irq_desc for 44 on node 0 alloc kstat_irqs on node 0 xen: --> irq=44 pci 0000:00:03.0: PCI INT A -> GSI 44 (level, low) -> IRQ 44 [drm] Initialized radeon 1.32.0 20080528 for 0000:00:03.0 on minor 0 EDAC MC: Ver: 2.1.0 Mar 6 2010 ipmi: Found new BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11) IPMI kcs interface initialized ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: duplicate interface EDAC amd64_edac: Ver: 3.2.0 Mar 6 2010 EDAC amd64: ECC is enabled by BIOS. EDAC amd64: ECC is enabled by BIOS. EDAC MC: F10h CPU detected EDAC MC0: Giving out device to 'amd64_edac' 'Family 10h': DEV 0000:00:18.2 EDAC MC: F10h CPU detected EDAC MC1: Giving out device to 'amd64_edac' 'Family 10h': DEV 0000:00:19.2 EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED) logips2pp: Detected unknown logitech mouse model 2 xen: registering gsi 46 triggering 0 polarity 1 xen_allocate_pirq: returning irq 46 for gsi 46 xen: --> irq=46 Already setup the GSI :46 ipmi_si 0000:00:04.6: PCI INT A -> GSI 46 (level, low) -> IRQ 46 ipmi_si: Trying PCI-specified kcs state machine at mem address 0xf3df0000, slave address 0x0, irq 46 Error: Driver 'pcspkr' is already registered, aborting... IRQ 46/ipmi_si: IRQF_DISABLED is not guaranteed on shared IRQs Using irq 46 input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input6 ipmi: interfacing existing BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11) IPMI kcs interface initialized EXT3 FS on dm-0, internal journal loop: module loaded kjournald starting. Commit interval 5 seconds EXT3 FS on cciss/c0d0p1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-3, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 9764856k swap on /dev/mapper/dl385--64-swap0. Priority:-1 extents:1 across:9764856k alloc irq_desc for 364 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 365 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 366 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 367 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 368 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 369 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 370 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 371 on node 0 alloc kstat_irqs on node 0 alloc irq_desc for 372 on node 0 alloc kstat_irqs on node 0 bnx2: eth0: using MSIX ADDRCONF(NETDEV_UP): eth0: link is not ready bnx2: eth0 NIC Copper Link is Up, 100 Mbps full duplex, receive & transmit flow control ON ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present INFO: task usb_id:696 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. usb_id D ffff88002809e5c0 0 696 1 0x00000000 ffff8807f8c4cdb0 0000000000000282 ffff8807f9a2bd48 ffff8807f9a2bd44 ffff8807f89d1428 ffff8807f9a2bfd8 000000000000f8a0 ffff8807f9a2bfd8 00000000000155c0 00000000000155c0 ffff8807f89d0e20 ffff8807f89d1118 Call Trace: [] ? schedule_timeout+0x2e/0xdd [] ? __alloc_pages_nodemask+0x10f/0x5ce [] ? __down_common+0x8d/0xde [] ? usb_sg_init+0x2dd/0x42e [usbcore] [] ? down+0x27/0x39 [] ? show_manufacturer+0x1e/0x4c [usbcore] [] ? dev_attr_show+0x1f/0x42 [] ? sysfs_read_file+0xa7/0x125 [] ? check_events+0x12/0x20 [] ? vfs_read+0xa6/0xff [] ? xen_restore_fl_direct_end+0x0/0x1 [] ? sys_read+0x45/0x6e [] ? system_call_fastpath+0x16/0x1b INFO: task khubd:297 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. khubd D 0000000000000000 0 297 2 0x00000000 ffffffff814551f0 0000000000000246 0000000000000000 0000000000000000 ffffffff813a51c4 0d2e51524920676e 000000000000f8a0 ffff8807f8527fd8 00000000000155c0 00000000000155c0 ffff8807f9ccbf90 ffff8807f9ccc288 Call Trace: [] ? usb_kill_urb+0x9d/0xbb [usbcore] [] ? autoremove_wake_function+0x0/0x2e [] ? usb_start_wait_urb+0x7e/0xb7 [usbcore] [] ? usb_control_msg+0x112/0x135 [usbcore] [] ? kmem_cache_alloc+0x8c/0xf0 [] ? hub_port_init+0x30f/0x6de [usbcore] [] ? hub_thread+0xa45/0x117e [usbcore] [] ? __switch_to+0x160/0x297 [] ? autoremove_wake_function+0x0/0x2e [] ? hub_thread+0x0/0x117e [usbcore] [] ? kthread+0x79/0x81 [] ? child_rip+0xa/0x20 [] ? int_ret_from_sys_call+0x7/0x1b [] ? retint_restore_args+0x5/0x6 [] ? child_rip+0x0/0x20 INFO: task usb_id:696 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. usb_id D ffff88002809e5c0 0 696 1 0x00000000 ffff8807f8c4cdb0 0000000000000282 ffff8807f9a2bd48 ffff8807f9a2bd44 ffff8807f89d1428 ffff8807f9a2bfd8 000000000000f8a0 ffff8807f9a2bfd8 00000000000155c0 00000000000155c0 ffff8807f89d0e20 ffff8807f89d1118 Call Trace: [] ? schedule_timeout+0x2e/0xdd [] ? __alloc_pages_nodemask+0x10f/0x5ce [] ? __down_common+0x8d/0xde [] ? usb_sg_init+0x2dd/0x42e [usbcore] [] ? down+0x27/0x39 [] ? show_manufacturer+0x1e/0x4c [usbcore] [] ? dev_attr_show+0x1f/0x42 [] ? sysfs_read_file+0xa7/0x125 [] ? check_events+0x12/0x20 [] ? vfs_read+0xa6/0xff [] ? xen_restore_fl_direct_end+0x0/0x1 [] ? sys_read+0x45/0x6e [] ? system_call_fastpath+0x16/0x1b INFO: task khubd:297 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. khubd D 0000000000000000 0 297 2 0x00000000 ffffffff814551f0 0000000000000246 0000000000000000 0000000000000000 ffffffff813a51c4 0d2e51524920676e 000000000000f8a0 ffff8807f8527fd8 00000000000155c0 00000000000155c0 ffff8807f9ccbf90 ffff8807f9ccc288 Call Trace: [] ? usb_kill_urb+0x9d/0xbb [usbcore] [] ? autoremove_wake_function+0x0/0x2e [] ? usb_start_wait_urb+0x7e/0xb7 [usbcore] [] ? usb_control_msg+0x112/0x135 [usbcore] [] ? kmem_cache_alloc+0x8c/0xf0 [] ? hub_port_init+0x30f/0x6de [usbcore] [] ? hub_thread+0xa45/0x117e [usbcore] [] ? __switch_to+0x160/0x297 [] ? autoremove_wake_function+0x0/0x2e [] ? hub_thread+0x0/0x117e [usbcore] [] ? kthread+0x79/0x81 [] ? child_rip+0xa/0x20 [] ? int_ret_from_sys_call+0x7/0x1b [] ? retint_restore_args+0x5/0x6 [] ? child_rip+0x0/0x20 INFO: task usb_id:696 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. usb_id D ffff88002809e5c0 0 696 1 0x00000000 ffff8807f8c4cdb0 0000000000000282 ffff8807f9a2bd48 ffff8807f9a2bd44 ffff8807f89d1428 ffff8807f9a2bfd8 000000000000f8a0 ffff8807f9a2bfd8 00000000000155c0 00000000000155c0 ffff8807f89d0e20 ffff8807f89d1118 Call Trace: [] ? schedule_timeout+0x2e/0xdd [] ? __alloc_pages_nodemask+0x10f/0x5ce [] ? __down_common+0x8d/0xde [] ? usb_sg_init+0x2dd/0x42e [usbcore] [] ? down+0x27/0x39 [] ? show_manufacturer+0x1e/0x4c [usbcore] [] ? dev_attr_show+0x1f/0x42 [] ? sysfs_read_file+0xa7/0x125 [] ? check_events+0x12/0x20 [] ? vfs_read+0xa6/0xff [] ? xen_restore_fl_direct_end+0x0/0x1 [] ? sys_read+0x45/0x6e [] ? system_call_fastpath+0x16/0x1b INFO: task khubd:297 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. khubd D 0000000000000000 0 297 2 0x00000000 ffffffff814551f0 0000000000000246 0000000000000000 0000000000000000 ffffffff813a51c4 0d2e51524920676e 000000000000f8a0 ffff8807f8527fd8 00000000000155c0 00000000000155c0 ffff8807f9ccbf90 ffff8807f9ccc288 Call Trace: [] ? usb_kill_urb+0x9d/0xbb [usbcore] [] ? autoremove_wake_function+0x0/0x2e [] ? usb_start_wait_urb+0x7e/0xb7 [usbcore] [] ? usb_control_msg+0x112/0x135 [usbcore] [] ? kmem_cache_alloc+0x8c/0xf0 [] ? hub_port_init+0x30f/0x6de [usbcore] [] ? hub_thread+0xa45/0x117e [usbcore] [] ? __switch_to+0x160/0x297 [] ? autoremove_wake_function+0x0/0x2e [] ? hub_thread+0x0/0x117e [usbcore] [] ? kthread+0x79/0x81 [] ? child_rip+0xa/0x20 [] ? int_ret_from_sys_call+0x7/0x1b [] ? retint_restore_args+0x5/0x6 [] ? child_rip+0x0/0x20 INFO: task usb_id:696 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. usb_id D ffff88002809e5c0 0 696 1 0x00000000 ffff8807f8c4cdb0 0000000000000282 ffff8807f9a2bd48 ffff8807f9a2bd44 ffff8807f89d1428 ffff8807f9a2bfd8 000000000000f8a0 ffff8807f9a2bfd8 00000000000155c0 00000000000155c0 ffff8807f89d0e20 ffff8807f89d1118 Call Trace: [] ? schedule_timeout+0x2e/0xdd [] ? __alloc_pages_nodemask+0x10f/0x5ce [] ? __down_common+0x8d/0xde [] ? usb_sg_init+0x2dd/0x42e [usbcore] [] ? down+0x27/0x39 [] ? show_manufacturer+0x1e/0x4c [usbcore] [] ? dev_attr_show+0x1f/0x42 [] ? sysfs_read_file+0xa7/0x125 [] ? check_events+0x12/0x20 [] ? vfs_read+0xa6/0xff [] ? xen_restore_fl_direct_end+0x0/0x1 [] ? sys_read+0x45/0x6e [] ? system_call_fastpath+0x16/0x1b INFO: task khubd:297 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. khubd D 0000000000000000 0 297 2 0x00000000 ffffffff814551f0 0000000000000246 0000000000000000 0000000000000000 ffffffff813a51c4 0d2e51524920676e 000000000000f8a0 ffff8807f8527fd8 00000000000155c0 00000000000155c0 ffff8807f9ccbf90 ffff8807f9ccc288 Call Trace: [] ? usb_kill_urb+0x9d/0xbb [usbcore] [] ? autoremove_wake_function+0x0/0x2e [] ? usb_start_wait_urb+0x7e/0xb7 [usbcore] [] ? usb_control_msg+0x112/0x135 [usbcore] [] ? kmem_cache_alloc+0x8c/0xf0 [] ? hub_port_init+0x30f/0x6de [usbcore] [] ? hub_thread+0xa45/0x117e [usbcore] [] ? __switch_to+0x160/0x297 [] ? autoremove_wake_function+0x0/0x2e [] ? hub_thread+0x0/0x117e [usbcore] [] ? kthread+0x79/0x81 [] ? child_rip+0xa/0x20 [] ? int_ret_from_sys_call+0x7/0x1b [] ? retint_restore_args+0x5/0x6 [] ? child_rip+0x0/0x20 INFO: task usb_id:696 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. usb_id D ffff88002809e5c0 0 696 1 0x00000000 ffff8807f8c4cdb0 0000000000000282 ffff8807f9a2bd48 ffff8807f9a2bd44 ffff8807f89d1428 ffff8807f9a2bfd8 000000000000f8a0 ffff8807f9a2bfd8 00000000000155c0 00000000000155c0 ffff8807f89d0e20 ffff8807f89d1118 Call Trace: [] ? schedule_timeout+0x2e/0xdd [] ? __alloc_pages_nodemask+0x10f/0x5ce [] ? __down_common+0x8d/0xde [] ? usb_sg_init+0x2dd/0x42e [usbcore] [] ? down+0x27/0x39 [] ? show_manufacturer+0x1e/0x4c [usbcore] [] ? dev_attr_show+0x1f/0x42 [] ? sysfs_read_file+0xa7/0x125 [] ? check_events+0x12/0x20 [] ? vfs_read+0xa6/0xff [] ? xen_restore_fl_direct_end+0x0/0x1 [] ? sys_read+0x45/0x6e [] ? system_call_fastpath+0x16/0x1b