Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.32-3-xen-amd64 (Debian 2.6.32-10) (maks@xxxxxxxxxx) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Sat Mar 6 11:38:35 UTC 2010 Command line: BOOT_IMAGE=//vmlinuz-2.6.32-3-xen-amd64 root=/dev/mapper/dl385--64-root64 ro console=ttyS0,115200n8 console=hvc0 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cfe3e000 (usable) BIOS-e820: 00000000cfe3e000 - 00000000cfe46000 (ACPI data) BIOS-e820: 00000000cfe46000 - 00000000cfe47000 (usable) BIOS-e820: 00000000cfe47000 - 00000000e0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000142ffff000 (usable) DMI 2.4 present. last_pfn = 0x142ffff max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-FFFFF write-back MTRR variable ranges enabled: 0 base 000000000000 mask FFFF80000000 write-back 1 base 000080000000 mask FFFFC0000000 write-back 2 base 0000C0000000 mask FFFFF0000000 write-back 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled TOM2: 0000001430000000 aka 82688M x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xcfe47 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 Using GB pages for direct mapping init_memory_mapping: 0000000000000000-00000000cfe47000 0000000000 - 00c0000000 page 1G 00c0000000 - 00cfe00000 page 2M 00cfe00000 - 00cfe47000 page 4k kernel direct mapping tables up to cfe47000 @ 8000-b000 init_memory_mapping: 0000000100000000-000000142ffff000 0100000000 - 1400000000 page 1G 1400000000 - 142fe00000 page 2M 142fe00000 - 142ffff000 page 4k kernel direct mapping tables up to 142ffff000 @ a000-d000 RAMDISK: 376f0000 - 37fefd82 ACPI: RSDP 00000000000f4f00 00024 (v02 HP ) ACPI: XSDT 00000000cfe3eec0 0009C (v01 HP ProLiant 00000002 Ò? 0000162E) ACPI: FACP 00000000cfe3efc0 000F4 (v03 HP ProLiant 00000002 Ò? 0000162E) ACPI: DSDT 00000000cfe3f0c0 0380A (v01 HP DSDT 00000001 INTL 20030228) ACPI: FACS 00000000cfe3e140 00040 ACPI: SPCR 00000000cfe3e180 00050 (v01 HP SPCRRBSU 00000001 Ò? 0000162E) ACPI: MCFG 00000000cfe3e200 0003C (v01 HP ProLiant 00000001 00000000) ACPI: HPET 00000000cfe3e240 00038 (v01 HP ProLiant 00000002 Ò? 0000162E) ACPI: SPMI 00000000cfe3e280 00040 (v05 HP ProLiant 00000001 Ò? 0000162E) ACPI: ERST 00000000cfe3e2c0 001D0 (v01 HP ProLiant 00000001 Ò? 0000162E) ACPI: APIC 00000000cfe3e4c0 000CA (v01 HP ProLiant 00000002 00000000) ACPI: SRAT 00000000cfe3e6c0 00190 (v01 AMD FAM_F_10 00000002 AMD 00000001) ACPI: FFFF 00000000cfe3eac0 00176 (v01 HP ProLiant 00000001 Ò? 0000162E) ACPI: BERT 00000000cfe3ec40 00030 (v01 HP ProLiant 00000001 Ò? 0000162E) ACPI: HEST 00000000cfe3ec80 0018C (v01 HP ProLiant 00000001 Ò? 0000162E) ACPI: FFFF 00000000cfe3ee40 00064 (v02 HP ProLiant 00000002 Ò? 0000162E) ACPI: SSDT 00000000cfe42900 002F7 (v03 HP pci0pcie 00000001 INTL 20061109) ACPI: SSDT 00000000cfe42c00 00125 (v03 HP CRSPCI0 00000002 HP 00000001) ACPI: SSDT 00000000cfe42d40 00086 (v03 HP CRSPCI1 00000002 HP 00000001) ACPI: Local APIC address 0xfee00000 SRAT: PXM 0 -> APIC 0 -> Node 0 SRAT: PXM 0 -> APIC 1 -> Node 0 SRAT: PXM 0 -> APIC 2 -> Node 0 SRAT: PXM 0 -> APIC 3 -> Node 0 SRAT: PXM 0 -> APIC 4 -> Node 0 SRAT: PXM 0 -> APIC 5 -> Node 0 SRAT: PXM 1 -> APIC 8 -> Node 1 SRAT: PXM 1 -> APIC 9 -> Node 1 SRAT: PXM 1 -> APIC 10 -> Node 1 SRAT: PXM 1 -> APIC 11 -> Node 1 SRAT: PXM 1 -> APIC 12 -> Node 1 SRAT: PXM 1 -> APIC 13 -> Node 1 SRAT: Node 0 PXM 0 0-a0000 SRAT: Node 0 PXM 0 100000-d0000000 SRAT: Node 0 PXM 0 100000000-a30000000 SRAT: Node 1 PXM 1 a30000000-1430000000 NUMA: Allocated memnodemap from c000 - 34640 NUMA: Using 20 for the hash shift. Bootmem setup node 0 0000000000000000-0000000a30000000 NODE_DATA [0000000000034640 - 000000000003c63f] bootmap [0000000000100000 - 0000000000245fff] pages 146 (9 early reservations) ==> bootmem [0000000000 - 0a30000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0001000000 - 000167cc14] TEXT DATA BSS ==> [0001000000 - 000167cc14] #3 [00376f0000 - 0037fefd82] RAMDISK ==> [00376f0000 - 0037fefd82] #4 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000] #5 [000167d000 - 000167d114] BRK ==> [000167d000 - 000167d114] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] #7 [000000a000 - 000000c000] PGTABLE ==> [000000a000 - 000000c000] #8 [000000c000 - 0000034640] MEMNODEMAP ==> [000000c000 - 0000034640] Bootmem setup node 1 0000000a30000000-000000142ffff000 NODE_DATA [0000000a30000000 - 0000000a30007fff] bootmap [0000000a30008000 - 0000000a30147fff] pages 140 (9 early reservations) ==> bootmem [0a30000000 - 142ffff000] #0 [0000000000 - 0000001000] BIOS data page #1 [0000006000 - 0000008000] TRAMPOLINE #2 [0001000000 - 000167cc14] TEXT DATA BSS #3 [00376f0000 - 0037fefd82] RAMDISK #4 [000009f400 - 0000100000] BIOS reserved #5 [000167d000 - 000167d114] BRK #6 [0000008000 - 000000a000] PGTABLE #7 [000000a000 - 000000c000] PGTABLE #8 [000000c000 - 0000034640] MEMNODEMAP found SMP MP-table at [ffff8800000f4f80] f4f80 [ffffea0000000000-ffffea001f1fffff] PMD -> [ffff880001800000-ffff88001fffffff] on node 0 [ffffea0023a80000-ffffea0023bfffff] potential offnode page_structs [ffffea001f200000-ffffea0023bfffff] PMD -> [ffff880028600000-ffff88002cffffff] on node 0 [ffffea0023c00000-ffffea003fffffff] PMD -> [ffff880a30200000-ffff880a4c5fffff] on node 1 [ffffea0040000000-ffffea0046bfffff] PMD -> [ffff880a4c800000-ffff880a533fffff] on node 1 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x0142ffff Movable zone start PFN for each node early_node_map[5] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x000cfe3e 0: 0x000cfe46 -> 0x000cfe47 0: 0x00100000 -> 0x00a30000 1: 0x00a30000 -> 0x0142ffff On node 0 totalpages: 10485214 DMA zone: 56 pages used for memmap DMA zone: 143 pages reserved DMA zone: 3800 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 833143 pages, LIFO batch:31 Normal zone: 131712 pages used for memmap Normal zone: 9502080 pages, LIFO batch:31 On node 1 totalpages: 10485759 Normal zone: 143360 pages used for memmap Normal zone: 10342399 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x920 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x08] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x09] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x0a] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x0b] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0c] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0d] enabled) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-15 ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[16]) IOAPIC[1]: apic_id 9, version 17, address 0xfec01000, GSI 16-31 ACPI: IOAPIC (id[0x0a] address[0xfec02000] gsi_base[32]) IOAPIC[2]: apic_id 10, version 17, address 0xfec02000, GSI 32-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x1166a201 base: 0xfed00000 SMP: Allowing 12 CPUs, 0 hotplug CPUs nr_irqs_gsi: 48 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 PM: Registered nosave memory: 00000000cfe3e000 - 00000000cfe46000 PM: Registered nosave memory: 00000000cfe47000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fee10000 PM: Registered nosave memory: 00000000fee10000 - 00000000ffc00000 PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000 Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000) Booting paravirtualized kernel on bare hardware NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:12 nr_node_ids:2 PERCPU: Embedded 29 pages/cpu @ffff880028200000 s89880 r8192 d20712 u262144 pcpu-alloc: s89880 r8192 d20712 u262144 alloc=1*2097152 pcpu-alloc: [0] 00 02 04 06 08 10 -- -- [1] 01 03 05 07 09 11 -- -- Built 2 zonelists in Zone order, mobility grouping on. Total pages: 20681422 Policy zone: Normal Kernel command line: BOOT_IMAGE=//vmlinuz-2.6.32-3-xen-amd64 root=/dev/mapper/dl385--64-root64 ro console=ttyS0,115200n8 console=hvc0 PID hash table entries: 4096 (order: 3, 32768 bytes) Initializing CPU#0 Checking aperture... No AGP bridge found Node 0: aperture @ 0 size 32 MB Memory: 82650980k/84672508k available (3054k kernel code, 788616k absent, 1232912k reserved, 1847k data, 584k init) SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=2 Hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:912 Extended CMOS year: 2000 spurious 8259A interrupt: IRQ7. Console: colour VGA+ 80x25 console [ttyS0] enabled hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Fast TSC calibration using PIT Detected 2600.686 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5201.35 BogoMIPS (lpj=10402716) Security Framework initialized SELinux: Disabled at boot. Dentry cache hash table entries: 16777216 (order: 15, 134217728 bytes) Inode-cache hash table entries: 8388608 (order: 14, 67108864 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0/0x0 -> Node 0 tseg: 0000000000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks using C1E aware idle routine Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f ACPI: Core revision 20090903 Setting APIC routing to physical flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Six-Core AMD Opteron(tm) Processor 2435 stepping 00 Booting processor 1 APIC 0x8 ip 0x6000 Initializing CPU#1 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1/0x8 -> Node 1 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 0 CPU1: Six-Core AMD Opteron(tm) Processor 2435 stepping 00 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Booting processor 2 APIC 0x1 ip 0x6000 Initializing CPU#2 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 2/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU2: Six-Core AMD Opteron(tm) Processor 2435 stepping 00 checking TSC synchronization [CPU#0 -> CPU#2]: passed. Booting processor 3 APIC 0x9 ip 0x6000 Initializing CPU#3 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 3/0x9 -> Node 1 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 1 CPU3: Six-Core AMD Opteron(tm) Processor 2435 stepping 00 checking TSC synchronization [CPU#0 -> CPU#3]: passed. Booting processor 4 APIC 0x2 ip 0x6000 Initializing CPU#4 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 4/0x2 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 CPU4: Six-Core AMD Opteron(tm) Processor 2435 stepping 00 checking TSC synchronization [CPU#0 -> CPU#4]: passed. Booting processor 5 APIC 0xa ip 0x6000 Initializing CPU#5 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 5/0xa -> Node 1 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 2 CPU5: Six-Core AMD Opteron(tm) Processor 2435 stepping 00 checking TSC synchronization [CPU#0 -> CPU#5]: passed. Booting processor 6 APIC 0x3 ip 0x6000 Initializing CPU#6 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 6/0x3 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 CPU6: Six-Core AMD Opteron(tm) Processor 2435 stepping 00 checking TSC synchronization [CPU#0 -> CPU#6]: passed. Booting processor 7 APIC 0xb ip 0x6000 Initializing CPU#7 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 7/0xb -> Node 1 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 3 CPU7: Six-Core AMD Opteron(tm) Processor 2435 stepping 00 checking TSC synchronization [CPU#0 -> CPU#7]: passed. Booting processor 8 APIC 0x4 ip 0x6000 Initializing CPU#8 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 8/0x4 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 4 CPU8: Six-Core AMD Opteron(tm) Processor 2435 stepping 00 checking TSC synchronization [CPU#0 -> CPU#8]: passed. Booting processor 9 APIC 0xc ip 0x6000 Initializing CPU#9 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 9/0xc -> Node 1 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 4 CPU9: Six-Core AMD Opteron(tm) Processor 2435 stepping 00 checking TSC synchronization [CPU#0 -> CPU#9]: passed. Booting processor 10 APIC 0x5 ip 0x6000 Initializing CPU#10 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 10/0x5 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 5 CPU10: Six-Core AMD Opteron(tm) Processor 2435 stepping 00 checking TSC synchronization [CPU#0 -> CPU#10]: passed. Booting processor 11 APIC 0xd ip 0x6000 Initializing CPU#11 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 11/0xd -> Node 1 CPU: Physical Processor ID: 1 CPU: Processor Core ID: 5 CPU11: Six-Core AMD Opteron(tm) Processor 2435 stepping 00 checking TSC synchronization [CPU#0 -> CPU#11]: passed. Brought up 12 CPUs Total of 12 processors activated (62405.07 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0,2,4,6,8,10 level MC groups: 0 2 4 6 8 10 domain 1: span 0-11 level NODE groups: 0,2,4,6,8,10 (cpu_power = 6144) 1,3,5,7,9,11 (cpu_power = 6144) CPU1 attaching sched-domain: domain 0: span 1,3,5,7,9,11 level MC groups: 1 3 5 7 9 11 domain 1: span 0-11 level NODE groups: 1,3,5,7,9,11 (cpu_power = 6144) 0,2,4,6,8,10 (cpu_power = 6144) CPU2 attaching sched-domain: domain 0: span 0,2,4,6,8,10 level MC groups: 2 4 6 8 10 0 domain 1: span 0-11 level NODE groups: 0,2,4,6,8,10 (cpu_power = 6144) 1,3,5,7,9,11 (cpu_power = 6144) CPU3 attaching sched-domain: domain 0: span 1,3,5,7,9,11 level MC groups: 3 5 7 9 11 1 domain 1: span 0-11 level NODE groups: 1,3,5,7,9,11 (cpu_power = 6144) 0,2,4,6,8,10 (cpu_power = 6144) CPU4 attaching sched-domain: domain 0: span 0,2,4,6,8,10 level MC groups: 4 6 8 10 0 2 domain 1: span 0-11 level NODE groups: 0,2,4,6,8,10 (cpu_power = 6144) 1,3,5,7,9,11 (cpu_power = 6144) CPU5 attaching sched-domain: domain 0: span 1,3,5,7,9,11 level MC groups: 5 7 9 11 1 3 domain 1: span 0-11 level NODE groups: 1,3,5,7,9,11 (cpu_power = 6144) 0,2,4,6,8,10 (cpu_power = 6144) CPU6 attaching sched-domain: domain 0: span 0,2,4,6,8,10 level MC groups: 6 8 10 0 2 4 domain 1: span 0-11 level NODE groups: 0,2,4,6,8,10 (cpu_power = 6144) 1,3,5,7,9,11 (cpu_power = 6144) CPU7 attaching sched-domain: domain 0: span 1,3,5,7,9,11 level MC groups: 7 9 11 1 3 5 domain 1: span 0-11 level NODE groups: 1,3,5,7,9,11 (cpu_power = 6144) 0,2,4,6,8,10 (cpu_power = 6144) CPU8 attaching sched-domain: domain 0: span 0,2,4,6,8,10 level MC groups: 8 10 0 2 4 6 domain 1: span 0-11 level NODE groups: 0,2,4,6,8,10 (cpu_power = 6144) 1,3,5,7,9,11 (cpu_power = 6144) CPU9 attaching sched-domain: domain 0: span 1,3,5,7,9,11 level MC groups: 9 11 1 3 5 7 domain 1: span 0-11 level NODE groups: 1,3,5,7,9,11 (cpu_power = 6144) 0,2,4,6,8,10 (cpu_power = 6144) CPU10 attaching sched-domain: domain 0: span 0,2,4,6,8,10 level MC groups: 10 0 2 4 6 8 domain 1: span 0-11 level NODE groups: 0,2,4,6,8,10 (cpu_power = 6144) 1,3,5,7,9,11 (cpu_power = 6144) CPU11 attaching sched-domain: domain 0: span 1,3,5,7,9,11 level MC groups: 11 1 3 5 7 9 domain 1: span 0-11 level NODE groups: 1,3,5,7,9,11 (cpu_power = 6144) 0,2,4,6,8,10 (cpu_power = 6144) devtmpfs: initialized regulator: core version 0.5 NET: Registered protocol family 16 node 0 link 0: io port [1000, 4fff] node 0 link 2: io port [5000, ffff] TOM: 00000000d0000000 aka 3328M Fam 10h mmconf [d0000000, dfffffff] node 0 link 0: mmio [e8000000, f7ffffff] node 0 link 2: mmio [f8000000, fdffffff] node 0 link 0: mmio [d0000000, d3ffffff] ==> none node 0 link 2: mmio [d4000000, dfffffff] ==> none node 0 link 0: mmio [a0000, bffff] TOM2: 0000001430000000 aka 82688M bus: [00,3f] on node 0 link 0 bus: 00 index 0 io port: [0, 4fff] bus: 00 index 1 mmio: [e0000000, f7ffffff] bus: 00 index 2 mmio: [a0000, bffff] bus: 00 index 3 mmio: [fe000000, ffffffff] bus: 00 index 4 mmio: [1430000000, fcffffffff] bus: [40,7f] on node 0 link 2 bus: 40 index 0 io port: [5000, ffff] bus: 40 index 1 mmio: [f8000000, fdffffff] ACPI: bus type pci registered PCI: MCFG configuration 0: base d0000000 segment 0 buses 0 - 255 PCI: MCFG area at d0000000 reserved in E820 PCI: Using MMCONFIG at d0000000 - dfffffff PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI Error: Field [CDW3] at 96 exceeds Buffer [NULL] size 64 (bits) (20090903/dsopcode-596) ACPI Error (psparse-0537): Method parse/execution failed [\_SB_._OSC] (Node ffff880a2fc236c0), AE_AML_BUFFER_LIMIT ACPI: Interpreter enabled ACPI: (supports S0 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:03.0: reg 10 32bit mmio pref: [0xe8000000-0xefffffff] pci 0000:00:03.0: reg 14 io port: [0x1000-0x10ff] pci 0000:00:03.0: reg 18 32bit mmio: [0xf3ef0000-0xf3efffff] pci 0000:00:03.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] pci 0000:00:03.0: supports D1 D2 pci 0000:00:04.0: reg 10 io port: [0x2800-0x28ff] pci 0000:00:04.0: reg 14 32bit mmio: [0xf3ee0000-0xf3ee01ff] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:04.2: reg 10 io port: [0x1400-0x14ff] pci 0000:00:04.2: reg 14 32bit mmio: [0xf3ed0000-0xf3ed07ff] pci 0000:00:04.2: reg 18 32bit mmio: [0xf3ec0000-0xf3ec3fff] pci 0000:00:04.2: reg 1c 32bit mmio: [0xf3e00000-0xf3e7ffff] pci 0000:00:04.2: reg 30 32bit mmio pref: [0x000000-0x00ffff] pci 0000:00:04.2: PME# supported from D0 D3hot D3cold pci 0000:00:04.2: PME# disabled pci 0000:00:04.4: reg 20 io port: [0x1800-0x181f] pci 0000:00:04.4: PME# supported from D0 D3hot D3cold pci 0000:00:04.4: PME# disabled pci 0000:00:04.6: reg 10 32bit mmio: [0xf3df0000-0xf3df00ff] pci 0000:00:04.6: PME# supported from D0 D3hot D3cold pci 0000:00:04.6: PME# disabled pci 0000:00:05.0: Enabling HT MSI Mapping pci 0000:00:07.0: reg 10 32bit mmio: [0xf3de0000-0xf3de0fff] pci 0000:00:07.0: reg 14 io port: [0x1c00-0x1cff] pci 0000:00:07.1: reg 10 32bit mmio: [0xf3dd0000-0xf3dd0fff] pci 0000:00:07.1: reg 14 io port: [0x3000-0x30ff] pci 0000:00:07.2: reg 10 32bit mmio: [0xf3dc0000-0xf3dc0fff] pci 0000:00:07.2: reg 14 io port: [0x3400-0x34ff] pci 0000:00:07.2: supports D1 D2 pci 0000:00:07.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:07.2: PME# disabled pci 0000:00:0f.0: PME# supported from D0 D3hot D3cold pci 0000:00:0f.0: PME# disabled pci 0000:00:10.0: PME# supported from D0 D3hot D3cold pci 0000:00:10.0: PME# disabled pci 0000:00:11.0: PME# supported from D0 D3hot D3cold pci 0000:00:11.0: PME# disabled pci 0000:00:12.0: PME# supported from D0 D3hot D3cold pci 0000:00:12.0: PME# disabled pci 0000:00:13.0: PME# supported from D0 D3hot D3cold pci 0000:00:13.0: PME# disabled PCI: peer root bus 00 res updated from pci conf pci 0000:01:0e.0: reg 10 io port: [0x4000-0x4007] pci 0000:01:0e.0: reg 14 io port: [0x4008-0x400b] pci 0000:01:0e.0: reg 18 io port: [0x4010-0x4017] pci 0000:01:0e.0: reg 1c io port: [0x4018-0x401b] pci 0000:01:0e.0: reg 20 io port: [0x4020-0x402f] pci 0000:01:0e.0: reg 24 32bit mmio: [0xf3ff0000-0xf3ff1fff] pci 0000:01:0e.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] pci 0000:00:05.0: bridge io port: [0x4000-0x4fff] pci 0000:00:05.0: bridge 32bit mmio: [0xf3f00000-0xf3ffffff] pci 0000:03:00.0: reg 10 64bit mmio: [0xf6000000-0xf7ffffff] pci 0000:03:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:03:00.1: reg 10 64bit mmio: [0xf4000000-0xf5ffffff] pci 0000:03:00.1: reg 30 32bit mmio pref: [0x000000-0x00ffff] pci 0000:03:00.1: PME# supported from D0 D3hot D3cold pci 0000:03:00.1: PME# disabled pci 0000:00:12.0: bridge 32bit mmio: [0xf4000000-0xf7ffffff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXB4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPXB._PRT] ACPI: PCI Root Bridge [PCI1] (0000:40) pci 0000:40:0f.0: PME# supported from D0 D3hot D3cold pci 0000:40:0f.0: PME# disabled pci 0000:40:10.0: PME# supported from D0 D3hot D3cold pci 0000:40:10.0: PME# disabled pci 0000:40:11.0: PME# supported from D0 D3hot D3cold pci 0000:40:11.0: PME# disabled pci 0000:40:12.0: PME# supported from D0 D3hot D3cold pci 0000:40:12.0: PME# disabled pci 0000:40:13.0: PME# supported from D0 D3hot D3cold pci 0000:40:13.0: PME# disabled PCI: peer root bus 40 res updated from pci conf pci 0000:48:00.0: reg 10 64bit mmio: [0xfdc00000-0xfdffffff] pci 0000:48:00.0: reg 18 64bit mmio: [0xfdbf0000-0xfdbf0fff] pci 0000:48:00.0: reg 20 io port: [0x5000-0x50ff] pci 0000:48:00.0: reg 30 32bit mmio pref: [0x000000-0x07ffff] pci 0000:48:00.0: supports D1 pci 0000:48:00.0: PME# supported from D0 pci 0000:48:00.0: PME# disabled pci 0000:40:11.0: bridge io port: [0x5000-0x5fff] pci 0000:40:11.0: bridge 32bit mmio: [0xfdb00000-0xfdffffff] pci 0000:41:00.0: reg 10 64bit mmio: [0xfa000000-0xfbffffff] pci 0000:41:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff] pci 0000:41:00.0: PME# supported from D0 D3hot D3cold pci 0000:41:00.0: PME# disabled pci 0000:41:00.1: reg 10 64bit mmio: [0xf8000000-0xf9ffffff] pci 0000:41:00.1: reg 30 32bit mmio pref: [0x000000-0x00ffff] pci 0000:41:00.1: PME# supported from D0 D3hot D3cold pci 0000:41:00.1: PME# disabled pci 0000:40:12.0: bridge 32bit mmio: [0xf8000000-0xfbffffff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.EXB0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.EXB1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.EXB2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.EXB3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.EXB4._PRT] ACPI: PCI Interrupt Link [IUSB] (IRQs *5) ACPI: PCI Interrupt Link [ISF0] (IRQs *14) ACPI: PCI Interrupt Link [IN00] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN01] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN02] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN03] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN04] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN05] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN06] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN07] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN08] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN09] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN10] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN11] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN12] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN13] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN14] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN15] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN16] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN17] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN18] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN19] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN20] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN21] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN22] (IRQs 7 *10 11) ACPI: PCI Interrupt Link [IN23] (IRQs *7 10 11) ACPI: PCI Interrupt Link [IN24] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN25] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN26] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN27] (IRQs 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [IN28] (IRQs *7 10 11) ACPI: PCI Interrupt Link [IN29] (IRQs 7 10 *11) ACPI: PCI Interrupt Link [IN30] (IRQs 7 *10 11) ACPI: PCI Interrupt Link [IN31] (IRQs 7 10 11) *0, disabled. xenbus_probe_backend_init bus registered ok xenbus_probe_frontend_init bus registered ok vgaarb: device added: PCI:0000:00:03.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded PCI: Using ACPI for IRQ routing hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered system 00:01: ioport range 0x408-0x40f has been reserved system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0x4d6-0x4d6 has been reserved system 00:01: ioport range 0x310-0x311 has been reserved system 00:01: ioport range 0x900-0x9fe has been reserved system 00:01: ioport range 0xc80-0xc83 has been reserved system 00:01: ioport range 0xcd4-0xcd7 has been reserved system 00:01: ioport range 0xf50-0xf58 has been reserved system 00:01: ioport range 0x520-0x520 has been reserved system 00:01: ioport range 0x580-0x59f has been reserved system 00:01: ioport range 0x700-0x703 has been reserved system 00:01: ioport range 0xc06-0xc07 has been reserved system 00:01: ioport range 0xc14-0xc14 has been reserved system 00:01: ioport range 0xc4a-0xc4a has been reserved system 00:01: ioport range 0xc50-0xc52 has been reserved system 00:01: ioport range 0xc6c-0xc6c has been reserved system 00:01: ioport range 0xc6f-0xc6f has been reserved system 00:01: ioport range 0xca0-0xca1 has been reserved system 00:01: ioport range 0xca4-0xca5 has been reserved system 00:01: ioport range 0x3f8-0x3ff has been reserved system 00:01: iomem range 0xd0000000-0xdfffffff has been reserved pci 0000:01:0d.0: PCI bridge, secondary bus 0000:02 pci 0000:01:0d.0: IO window: disabled pci 0000:01:0d.0: MEM window: disabled pci 0000:01:0d.0: PREFETCH window: disabled pci 0000:00:05.0: PCI bridge, secondary bus 0000:01 pci 0000:00:05.0: IO window: 0x4000-0x4fff pci 0000:00:05.0: MEM window: 0xf3f00000-0xf3ffffff pci 0000:00:05.0: PREFETCH window: 0xe0000000-0xe00fffff pci 0000:00:0f.0: PCI bridge, secondary bus 0000:04 pci 0000:00:0f.0: IO window: disabled pci 0000:00:0f.0: MEM window: disabled pci 0000:00:0f.0: PREFETCH window: disabled pci 0000:00:10.0: PCI bridge, secondary bus 0000:07 pci 0000:00:10.0: IO window: disabled pci 0000:00:10.0: MEM window: disabled pci 0000:00:10.0: PREFETCH window: disabled pci 0000:00:11.0: PCI bridge, secondary bus 0000:0a pci 0000:00:11.0: IO window: disabled pci 0000:00:11.0: MEM window: disabled pci 0000:00:11.0: PREFETCH window: disabled pci 0000:00:12.0: PCI bridge, secondary bus 0000:03 pci 0000:00:12.0: IO window: disabled pci 0000:00:12.0: MEM window: 0xf4000000-0xf7ffffff pci 0000:00:12.0: PREFETCH window: 0xe0100000-0xe01fffff pci 0000:00:13.0: PCI bridge, secondary bus 0000:0d pci 0000:00:13.0: IO window: disabled pci 0000:00:13.0: MEM window: disabled pci 0000:00:13.0: PREFETCH window: disabled alloc irq_desc for 42 on node 0 alloc kstat_irqs on node 0 pci 0000:00:0f.0: PCI INT A -> GSI 42 (level, low) -> IRQ 42 pci 0000:00:0f.0: setting latency timer to 64 alloc irq_desc for 38 on node 0 alloc kstat_irqs on node 0 pci 0000:00:10.0: PCI INT A -> GSI 38 (level, low) -> IRQ 38 pci 0000:00:10.0: setting latency timer to 64 alloc irq_desc for 39 on node 0 alloc kstat_irqs on node 0 pci 0000:00:11.0: PCI INT A -> GSI 39 (level, low) -> IRQ 39 pci 0000:00:11.0: setting latency timer to 64 alloc irq_desc for 40 on node 0 alloc kstat_irqs on node 0 pci 0000:00:12.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40 pci 0000:00:12.0: setting latency timer to 64 alloc irq_desc for 41 on node 0 alloc kstat_irqs on node 0 pci 0000:00:13.0: PCI INT A -> GSI 41 (level, low) -> IRQ 41 pci 0000:00:13.0: setting latency timer to 64 pci 0000:40:0f.0: PCI bridge, secondary bus 0000:42 pci 0000:40:0f.0: IO window: disabled pci 0000:40:0f.0: MEM window: disabled pci 0000:40:0f.0: PREFETCH window: disabled pci 0000:40:10.0: PCI bridge, secondary bus 0000:45 pci 0000:40:10.0: IO window: disabled pci 0000:40:10.0: MEM window: disabled pci 0000:40:10.0: PREFETCH window: disabled pci 0000:40:11.0: PCI bridge, secondary bus 0000:48 pci 0000:40:11.0: IO window: 0x5000-0x5fff pci 0000:40:11.0: MEM window: 0xfdb00000-0xfdffffff pci 0000:40:11.0: PREFETCH window: 0xfc000000-0xfc0fffff pci 0000:40:12.0: PCI bridge, secondary bus 0000:41 pci 0000:40:12.0: IO window: disabled pci 0000:40:12.0: MEM window: 0xf8000000-0xfbffffff pci 0000:40:12.0: PREFETCH window: 0xfc100000-0xfc1fffff pci 0000:40:13.0: PCI bridge, secondary bus 0000:4b pci 0000:40:13.0: IO window: disabled pci 0000:40:13.0: MEM window: disabled pci 0000:40:13.0: PREFETCH window: disabled alloc irq_desc for 36 on node 0 alloc kstat_irqs on node 0 pci 0000:40:0f.0: PCI INT A -> GSI 36 (level, low) -> IRQ 36 pci 0000:40:0f.0: setting latency timer to 64 alloc irq_desc for 32 on node 0 alloc kstat_irqs on node 0 pci 0000:40:10.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32 pci 0000:40:10.0: setting latency timer to 64 alloc irq_desc for 33 on node 0 alloc kstat_irqs on node 0 pci 0000:40:11.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33 pci 0000:40:11.0: setting latency timer to 64 alloc irq_desc for 34 on node 0 alloc kstat_irqs on node 0 pci 0000:40:12.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34 pci 0000:40:12.0: setting latency timer to 64 alloc irq_desc for 35 on node 0 alloc kstat_irqs on node 0 pci 0000:40:13.0: PCI INT A -> GSI 35 (level, low) -> IRQ 35 pci 0000:40:13.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0x4fff] pci_bus 0000:00: resource 1 mem: [0xe0000000-0xf7ffffff] pci_bus 0000:00: resource 2 mem: [0x0a0000-0x0bffff] pci_bus 0000:00: resource 3 mem: [0xfe000000-0xffffffff] pci_bus 0000:00: resource 4 mem: [0x1430000000-0xfcffffffff] pci_bus 0000:01: resource 0 io: [0x4000-0x4fff] pci_bus 0000:01: resource 1 mem: [0xf3f00000-0xf3ffffff] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xe00fffff] pci_bus 0000:03: resource 1 mem: [0xf4000000-0xf7ffffff] pci_bus 0000:03: resource 2 pref mem [0xe0100000-0xe01fffff] pci_bus 0000:40: resource 0 io: [0x5000-0xffff] pci_bus 0000:40: resource 1 mem: [0xf8000000-0xfdffffff] pci_bus 0000:48: resource 0 io: [0x5000-0x5fff] pci_bus 0000:48: resource 1 mem: [0xfdb00000-0xfdffffff] pci_bus 0000:48: resource 2 pref mem [0xfc000000-0xfc0fffff] pci_bus 0000:41: resource 1 mem: [0xf8000000-0xfbffffff] pci_bus 0000:41: resource 2 pref mem [0xfc100000-0xfc1fffff] NET: Registered protocol family 2 IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:00:03.0: Boot video device pci 0000:00:04.4: HCRESET not completed yet! pci 0000:00:06.0: disabled boot interrupts on device [1166:0205] Unpacking initramfs... Freeing initrd memory: 9215k freed PCI-DMA: Disabling AGP. PCI-DMA: More than 4GB of RAM and no IOMMU falling back to iommu=soft. More than 4GB of memory but GART IOMMU not available. falling back to iommu=soft. PCI-DMA: Using software bounce buffering for IO (SWIOTLB) DMA: Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 DMA: software IO TLB at phys 0x20000000 - 0x24000000 audit: initializing netlink socket (disabled) type=2000 audit(1268216623.245:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 32768 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) alloc irq_desc for 48 on node 0 alloc kstat_irqs on node 0 pcieport 0000:00:0f.0: irq 48 for MSI/MSI-X pcieport 0000:00:0f.0: setting latency timer to 64 alloc irq_desc for 49 on node 0 alloc kstat_irqs on node 0 pcieport 0000:00:10.0: irq 49 for MSI/MSI-X pcieport 0000:00:10.0: setting latency timer to 64 alloc irq_desc for 50 on node 0 alloc kstat_irqs on node 0 pcieport 0000:00:11.0: irq 50 for MSI/MSI-X pcieport 0000:00:11.0: setting latency timer to 64 alloc irq_desc for 51 on node 0 alloc kstat_irqs on node 0 pcieport 0000:00:12.0: irq 51 for MSI/MSI-X pcieport 0000:00:12.0: setting latency timer to 64 alloc irq_desc for 52 on node 0 alloc kstat_irqs on node 0 pcieport 0000:00:13.0: irq 52 for MSI/MSI-X pcieport 0000:00:13.0: setting latency timer to 64 alloc irq_desc for 53 on node 0 alloc kstat_irqs on node 0 pcieport 0000:40:0f.0: irq 53 for MSI/MSI-X pcieport 0000:40:0f.0: setting latency timer to 64 alloc irq_desc for 54 on node 0 alloc kstat_irqs on node 0 pcieport 0000:40:10.0: irq 54 for MSI/MSI-X pcieport 0000:40:10.0: setting latency timer to 64 alloc irq_desc for 55 on node 0 alloc kstat_irqs on node 0 pcieport 0000:40:11.0: irq 55 for MSI/MSI-X pcieport 0000:40:11.0: setting latency timer to 64 alloc irq_desc for 56 on node 0 alloc kstat_irqs on node 0 pcieport 0000:40:12.0: irq 56 for MSI/MSI-X pcieport 0000:40:12.0: setting latency timer to 64 alloc irq_desc for 57 on node 0 alloc kstat_irqs on node 0 pcieport 0000:40:13.0: irq 57 for MSI/MSI-X pcieport 0000:40:13.0: setting latency timer to 64 aer 0000:00:0f.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:00:10.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:00:11.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:00:12.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:00:13.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:40:0f.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:40:10.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:40:11.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:40:12.0:pcie02: AER service couldn't init device: no _OSC support aer 0000:40:13.0:pcie02: AER service couldn't init device: no _OSC support Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A input: Macintosh mouse button emulation as /devices/virtual/input/input0 PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:0a: RTC can wake from S4 rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu No iBFT detected. TCP cubic registered NET: Registered protocol family 10 lo: Disabled Privacy Extensions Mobile IPv6 NET: Registered protocol family 17 PM: Resume from disk failed. registered taskstats version 1 rtc_cmos 00:0a: setting system clock to 2010-03-10 10:23:47 UTC (1268216627) Freeing unused kernel memory: 584k freed Write protecting the kernel read-only data: 4188k input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.2 (Aug 21, 2009) bnx2 0000:03:00.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40 bnx2 0000:03:00.0: setting latency timer to 64 bnx2 0000:03:00.0: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw ACPI: PCI Interrupt Link [IUSB] enabled at IRQ 5 ehci_hcd 0000:00:07.2: PCI INT A -> Link[IUSB] -> GSI 5 (level, low) -> IRQ 5 ehci_hcd 0000:00:07.2: EHCI Host Controller bnx2 0000:03:00.0: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw ehci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f6000000, IRQ 40, node addr 18:a9:05:68:49:fe bnx2 0000:03:00.1: PCI INT B -> GSI 39 (level, low) -> IRQ 39 bnx2 0000:03:00.1: setting latency timer to 64 bnx2 0000:03:00.1: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw libata version 3.00 loaded. HP CISS Driver (v 3.6.20) cciss 0000:48:00.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33 bnx2 0000:03:00.1: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw alloc irq_desc for 58 on node 0 alloc kstat_irqs on node 0 cciss 0000:48:00.0: irq 58 for MSI/MSI-X alloc irq_desc for 59 on node 0 alloc kstat_irqs on node 0 cciss 0000:48:00.0: irq 59 for MSI/MSI-X alloc irq_desc for 60 on node 0 alloc kstat_irqs on node 0 cciss 0000:48:00.0: irq 60 for MSI/MSI-X alloc irq_desc for 61 on node 0 alloc kstat_irqs on node 0 cciss 0000:48:00.0: irq 61 for MSI/MSI-X sata_svw 0000:01:0e.0: version 2.3 ehci_hcd 0000:00:07.2: irq 5, io mem 0xf3dc0000 ACPI: PCI Interrupt Link [ISF0] enabled at IRQ 14 sata_svw 0000:01:0e.0: PCI INT A -> Link[ISF0] -> GSI 14 (level, low) -> IRQ 14 eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f4000000, IRQ 39, node addr 18:a9:05:68:4a:00 ehci_hcd 0000:00:07.2: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32-3-xen-amd64 ehci_hcd usb usb1: SerialNumber: 0000:00:07.2 IRQ 60/cciss0: IRQF_DISABLED is not guaranteed on shared IRQs cciss0: <0x323a> at PCI 0000:48:00.0 IRQ 60 using DAC usb usb1: configuration #1 chosen from 1 choice bnx2 0000:41:00.0: PCI INT A -> GSI 34 (level, low) -> IRQ 34 cciss/c0d0: p1 p2 hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected bnx2 0000:41:00.0: setting latency timer to 64 bnx2 0000:41:00.0: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw scsi0 : sata_svw scsi1 : sata_svw scsi2 : sata_svw scsi3 : sata_svw ata1: SATA max UDMA/133 mmio m8192@0xf3ff0000 port 0xf3ff0000 irq 14 ata2: SATA max UDMA/133 mmio m8192@0xf3ff0000 port 0xf3ff0100 irq 14 ata3: SATA max UDMA/133 mmio m8192@0xf3ff0000 port 0xf3ff0200 irq 14 ata4: SATA max UDMA/133 mmio m8192@0xf3ff0000 port 0xf3ff0300 irq 14 bnx2 0000:41:00.0: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw uhci_hcd: USB Universal Host Controller Interface driver alloc irq_desc for 45 on node 0 alloc kstat_irqs on node 0 uhci_hcd 0000:00:04.4: PCI INT B -> GSI 45 (level, low) -> IRQ 45 uhci_hcd 0000:00:04.4: UHCI Host Controller uhci_hcd 0000:00:04.4: new USB bus registered, assigned bus number 2 eth2: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem fa000000, IRQ 34, node addr 18:a9:05:68:49:fa uhci_hcd 0000:00:04.4: port count misdetected? forcing to 2 ports uhci_hcd 0000:00:04.4: HCRESET not completed yet! uhci_hcd 0000:00:04.4: irq 45, io base 0x00001800 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.32-3-xen-amd64 uhci_hcd usb usb2: SerialNumber: 0000:00:04.4 bnx2 0000:41:00.1: PCI INT B -> GSI 33 (level, low) -> IRQ 33 bnx2 0000:41:00.1: setting latency timer to 64 bnx2 0000:41:00.1: firmware: requesting bnx2/bnx2-mips-09-5.0.0.j3.fw usb usb2: configuration #1 chosen from 1 choice ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected bnx2 0000:41:00.1: firmware: requesting bnx2/bnx2-rv2p-09-5.0.0.j3.fw ohci_hcd 0000:00:07.0: PCI INT A -> Link[IUSB] -> GSI 5 (level, low) -> IRQ 5 ohci_hcd 0000:00:07.0: OHCI Host Controller ohci_hcd 0000:00:07.0: new USB bus registered, assigned bus number 3 eth3: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem f8000000, IRQ 33, node addr 18:a9:05:68:49:fc ohci_hcd 0000:00:07.0: irq 5, io mem 0xf3de0000 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 2.6.32-3-xen-amd64 ohci_hcd usb usb3: SerialNumber: 0000:00:07.0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ohci_hcd 0000:00:07.1: PCI INT A -> Link[IUSB] -> GSI 5 (level, low) -> IRQ 5 ohci_hcd 0000:00:07.1: OHCI Host Controller ohci_hcd 0000:00:07.1: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:07.1: irq 5, io mem 0xf3dd0000 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: OHCI Host Controller usb usb4: Manufacturer: Linux 2.6.32-3-xen-amd64 ohci_hcd usb usb4: SerialNumber: 0000:00:07.1 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATAPI: Optiarc DVD RW AD-7561S, AH52, max UDMA/100 ata1.00: configured for UDMA/100 scsi 0:0:0:0: CD-ROM Optiarc DVD RW AD-7561S AH52 PQ: 0 ANSI: 5 usb 2-1: new full speed USB device using uhci_hcd and address 2 usb 2-1: New USB device found, idVendor=03f0, idProduct=1027 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-1: Product: Virtual Keyboard usb 2-1: Manufacturer: HP usb 2-1: configuration #1 chosen from 1 choice ata2: SATA link down (SStatus 4 SControl 300) usb 4-1: new full speed USB device using ohci_hcd and address 2 usb 4-1: not running at top speed; connect to a high speed hub usb 4-1: New USB device found, idVendor=04b4, idProduct=6560 usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 usb 4-1: configuration #1 chosen from 1 choice hub 4-1:1.0: USB hub found hub 4-1:1.0: 4 ports detected ata3: SATA link down (SStatus 4 SControl 300) ata4: SATA link down (SStatus 4 SControl 300) Uniform Multi-Platform E-IDE driver usbcore: registered new interface driver hiddev input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:04.4/usb2/2-1/2-1:1.0/input/input3 generic-usb 0003:03F0:1027.0001: input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:00:04.4-1/input0 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:04.4/usb2/2-1/2-1:1.1/input/input4 generic-usb 0003:03F0:1027.0002: input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:00:04.4-1/input1 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver sr 0:0:0:0: Attached scsi CD-ROM sr0 sr 0:0:0:0: Attached scsi generic sg0 type 5 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. udev: starting version 151 processor LNXCPU:00: registered as cooling_device0 processor LNXCPU:01: registered as cooling_device1 processor LNXCPU:02: registered as cooling_device2 processor LNXCPU:03: registered as cooling_device3 processor LNXCPU:04: registered as cooling_device4 processor LNXCPU:05: registered as cooling_device5 processor LNXCPU:06: registered as cooling_device6 processor LNXCPU:07: registered as cooling_device7 processor LNXCPU:08: registered as cooling_device8 processor LNXCPU:09: registered as cooling_device9 processor LNXCPU:0a: registered as cooling_device10 processor LNXCPU:0b: registered as cooling_device11 input: PC Speaker as /devices/platform/pcspkr/input/input5 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 hpilo 0000:00:04.2: PCI INT B -> GSI 45 (level, low) -> IRQ 45 alloc irq_desc for 46 on node 0 alloc kstat_irqs on node 0 hpwdt 0000:00:04.0: PCI INT A -> GSI 46 (level, low) -> IRQ 46 hpwdt: New timer passed in is 30 seconds. hp Watchdog Timer Driver: 1.1.1, timer margin: 30 seconds (nowayout=0), allow kernel dump: OFF (default = 0/OFF), priority: LAST (default = 0/LAST). shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 logips2pp: Detected unknown logitech mouse model 2 input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input6 ipmi message handler version 39.2 EDAC MC: Ver: 2.1.0 Mar 6 2010 IPMI System Interface driver. piix4_smbus 0000:00:06.0: SMBus Host Controller at 0x580, revision 0 ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0 EDAC amd64_edac: Ver: 3.2.0 Mar 6 2010 EDAC amd64: ECC is enabled by BIOS. EDAC amd64: ECC is enabled by BIOS. EDAC MC: F10h CPU detected EDAC MC0: Giving out device to 'amd64_edac' 'Family 10h': DEV 0000:00:18.2 EDAC MC: F10h CPU detected EDAC MC1: Giving out device to 'amd64_edac' 'Family 10h': DEV 0000:00:19.2 EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED) [drm] Initialized drm 1.1.0 20060810 Error: Driver 'pcspkr' is already registered, aborting... ipmi: Found new BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11) IPMI kcs interface initialized ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [drm] radeon defaulting to userspace modesetting. alloc irq_desc for 44 on node 0 alloc kstat_irqs on node 0 pci 0000:00:03.0: PCI INT A -> GSI 44 (level, low) -> IRQ 44 ipmi_si: duplicate interface [drm] Initialized radeon 1.32.0 20080528 for 0000:00:03.0 on minor 0 ipmi_si 0000:00:04.6: PCI INT A -> GSI 46 (level, low) -> IRQ 46 ipmi_si: Trying PCI-specified kcs state machine at mem address 0xf3df0000, slave address 0x0, irq 46 IRQ 46/ipmi_si: IRQF_DISABLED is not guaranteed on shared IRQs Using irq 46 ipmi: interfacing existing BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11) IPMI kcs interface initialized EXT3 FS on dm-0, internal journal loop: module loaded kjournald starting. Commit interval 5 seconds EXT3 FS on cciss/c0d0p1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on dm-3, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 9764856k swap on /dev/mapper/dl385--64-swap0. Priority:-1 extents:1 across:9764856k alloc irq_desc for 62 on node 0 alloc kstat_irqs on node 0 bnx2 0000:03:00.0: irq 62 for MSI/MSI-X alloc irq_desc for 63 on node 0 alloc kstat_irqs on node 0 bnx2 0000:03:00.0: irq 63 for MSI/MSI-X alloc irq_desc for 64 on node 0 alloc kstat_irqs on node 0 bnx2 0000:03:00.0: irq 64 for MSI/MSI-X alloc irq_desc for 65 on node 0 alloc kstat_irqs on node 0 bnx2 0000:03:00.0: irq 65 for MSI/MSI-X alloc irq_desc for 66 on node 0 alloc kstat_irqs on node 0 bnx2 0000:03:00.0: irq 66 for MSI/MSI-X alloc irq_desc for 67 on node 0 alloc kstat_irqs on node 0 bnx2 0000:03:00.0: irq 67 for MSI/MSI-X alloc irq_desc for 68 on node 0 alloc kstat_irqs on node 0 bnx2 0000:03:00.0: irq 68 for MSI/MSI-X alloc irq_desc for 69 on node 0 alloc kstat_irqs on node 0 bnx2 0000:03:00.0: irq 69 for MSI/MSI-X alloc irq_desc for 70 on node 0 alloc kstat_irqs on node 0 bnx2 0000:03:00.0: irq 70 for MSI/MSI-X bnx2: eth0: using MSIX ADDRCONF(NETDEV_UP): eth0: link is not ready kvm: Nested Virtualization enabled kvm: Nested Paging enabled bnx2: eth0 NIC Copper Link is Up, 100 Mbps full duplex, receive & transmit flow control ON ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present