[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] Re: pv_ops dom0 kernel vga text console line offset problem



On Tue, Dec 15, 2009 at 11:08:16AM -0800, Jeremy Fitzhardinge wrote:
> On 12/13/2009 08:31 AM, Pasi Kärkkäinen wrote:
>> My newer x86_64 testbox shows a problem with vga text console, basicly
>> when drm is initialized (without modesetting, kernel has "nomodeset" 
>> parameter),
>> all the text gets some offset, ie. the text doesn't start from the
>> beginning of the line, but from the middle of the screen.
>>
>> This happens with pv_ops dom0 kernel, using Xen 3.4.x hypervisor. The
>> same kernel binary works OK without problems on baremetal (without Xen).
>>
>> I recorded a video of this behaviour, it's easiest to check it out:
>> http://pasik.reaktio.net/xen/pv_ops-dom0-debug/xen_pvops_dom0_vga_console_line_offset_problem-xvid.avi
>>
>> Any ideas?
>>
>> Hardware is Supermicro Intel motherboard with ATI ES1000 graphics.
>>    
>
> Yes, that's very odd.  Are you using any ATI-specific drivers, or is  
> this being used as plain generic VGA hardware?  You have radeon drm;  
> what happens if you disable that?
>

I just hacked the initrd image to not load radeon/drm/ttm modules, 
and also blacklisted them in modprobe.d so that udev can't load them.

And the offset-problem still happens.. It looks like it happens when
USB modules are loaded.. ?

(I verified after the system started that no radeon/drm/ttm modules were 
loaded).

> I guess there's some register state which isn't being either set up  
> properly, or read back properly, so the kernel driver is out of sync  
> with the actual hardware state.  But I'm not sure where I'd start  
> looking for the problem.
>

Hmm.. I wonder if it's actually related to the other USB problem I have:
http://pasik.reaktio.net/xen/pv_ops-dom0-debug/dmesg-2.6.31.6-vga-text-console-line-offset-problem2.txt

usb 1-5: new high speed USB device using ehci_hcd and address 2

======================================================
[ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ]
2.6.31.6 #8
------------------------------------------------------
khubd/42 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
 (&retval->lock){......}, at: [<ffffffff811298c4>] dma_pool_alloc+0x45/0x321

and this task is already holding:
 (&ehci->lock){-.....}, at: [<ffffffff813db662>] ehci_urb_enqueue+0xb4/0xd7a
which would create a new lock dependency:
 (&ehci->lock){-.....} -> (&retval->lock){......}

but this new dependency connects a HARDIRQ-irq-safe lock:
 (&ehci->lock){-.....}
... which became HARDIRQ-irq-safe at:
  [<ffffffff81099a1d>] __lock_acquire+0x254/0xc0e
  [<ffffffff8109a4c5>] lock_acquire+0xee/0x12e
  [<ffffffff815138f7>] _spin_lock+0x45/0x8e
  [<ffffffff813da270>] ehci_irq+0x41/0x441
  [<ffffffff813beef6>] usb_hcd_irq+0x59/0xcc
  [<ffffffff810c8834>] handle_IRQ_event+0x62/0x148
  [<ffffffff810cadc7>] handle_level_irq+0x90/0xf9
  [<ffffffff81018014>] handle_irq+0x9a/0xba
  [<ffffffff8130a929>] xen_evtchn_do_upcall+0x10c/0x1bd
  [<ffffffff810162fe>] xen_do_hypervisor_callback+0x1e/0x30
  [<ffffffffffffffff>] 0xffffffffffffffff

to a HARDIRQ-irq-unsafe lock:
 (purge_lock){+.+...}
... which became HARDIRQ-irq-unsafe at:
...  [<ffffffff81099a91>] __lock_acquire+0x2c8/0xc0e
  [<ffffffff8109a4c5>] lock_acquire+0xee/0x12e
  [<ffffffff815138f7>] _spin_lock+0x45/0x8e
  [<ffffffff811229b4>] __purge_vmap_area_lazy+0x63/0x198
  [<ffffffff81124280>] vm_unmap_aliases+0x18f/0x1b2
  [<ffffffff8100e594>] xen_alloc_ptpage+0x47/0x75
  [<ffffffff8100e5ff>] xen_alloc_pte+0x13/0x15
  [<ffffffff81117bdb>] __pte_alloc_kernel+0x6f/0xdd
  [<ffffffff811237ad>] vmap_page_range_noflush+0x1c5/0x315
  [<ffffffff8112393e>] map_vm_area+0x41/0x6b
  [<ffffffff81123a97>] __vmalloc_area_node+0x12f/0x167
  [<ffffffff81123b5f>] __vmalloc_node+0x90/0xb5
  [<ffffffff81123dd6>] __vmalloc+0x28/0x3e
  [<ffffffff81a2db10>] alloc_large_system_hash+0x12c/0x1f8
  [<ffffffff81a30190>] vfs_caches_init+0xb8/0x140
  [<ffffffff81a08629>] start_kernel+0x3ef/0x44c
  [<ffffffff81a07930>] x86_64_start_reservations+0xbb/0xd6
  [<ffffffff81a0be20>] xen_start_kernel+0x5dc/0x5e3
  [<ffffffffffffffff>] 0xffffffffffffffff

other info that might help us debug this:

2 locks held by khubd/42:
 #0:  (usb_address0_mutex){+.+...}, at: [<ffffffff813b9f1f>] 
hub_port_init+0x8c/0x7ec
 #1:  (&ehci->lock){-.....}, at: [<ffffffff813db662>] 
ehci_urb_enqueue+0xb4/0xd7a

the HARDIRQ-irq-safe lock's dependencies:
-> (&ehci->lock){-.....} ops: 0 {
   IN-HARDIRQ-W at:
                        [<ffffffff81099a1d>] __lock_acquire+0x254/0xc0e
                        [<ffffffff8109a4c5>] lock_acquire+0xee/0x12e
                        [<ffffffff815138f7>] _spin_lock+0x45/0x8e
                        [<ffffffff813da270>] ehci_irq+0x41/0x441
                        [<ffffffff813beef6>] usb_hcd_irq+0x59/0xcc
                        [<ffffffff810c8834>] handle_IRQ_event+0x62/0x148
                        [<ffffffff810cadc7>] handle_level_irq+0x90/0xf9
                        [<ffffffff81018014>] handle_irq+0x9a/0xba
                        [<ffffffff8130a929>] xen_evtchn_do_upcall+0x10c/0x1bd
                        [<ffffffff810162fe>] 
xen_do_hypervisor_callback+0x1e/0x30
                        [<ffffffffffffffff>] 0xffffffffffffffff
   INITIAL USE at:
                       [<ffffffff81099b08>] __lock_acquire+0x33f/0xc0e
                       [<ffffffff8109a4c5>] lock_acquire+0xee/0x12e
                       [<ffffffff81513aca>] _spin_lock_irqsave+0x5d/0xab
                       [<ffffffff813d8e35>] ehci_endpoint_reset+0x5a/0x12b
                       [<ffffffff813be299>] usb_hcd_reset_endpoint+0x35/0x84
                       [<ffffffff813c22d5>] usb_enable_endpoint+0x52/0xa6
                       [<ffffffff813c2374>] usb_enable_interface+0x4b/0x74
                       [<ffffffff813c44b1>] usb_set_configuration+0x479/0x6af
                       [<ffffffff813ce7d1>] generic_probe+0x6c/0xcb
                       [<ffffffff813c5102>] usb_probe_device+0x6c/0xb4
                       [<ffffffff8135f5b3>] driver_probe_device+0xed/0x22a
                       [<ffffffff8135f7e3>] __device_attach+0x4d/0x68
                       [<ffffffff8135e40d>] bus_for_each_drv+0x68/0xb3
                       [<ffffffff8135f8c5>] device_attach+0x75/0xa0
                       [<ffffffff8135e1d1>] bus_probe_device+0x3a/0x65
                       [<ffffffff8135c0bd>] device_add+0x3db/0x586
                       [<ffffffff813bb91e>] usb_new_device+0x169/0x232
                       [<ffffffff813c01b4>] usb_add_hcd+0x4be/0x6a8
                       [<ffffffff813cfe2a>] usb_hcd_pci_probe+0x263/0x3bd
                       [<ffffffff8129601f>] local_pci_probe+0x2a/0x42
                       [<ffffffff8107e88f>] do_work_for_cpu+0x27/0x50
                       [<ffffffff81083bcc>] kthread+0xac/0xb4
                       [<ffffffff810161aa>] child_rip+0xa/0x20
                       [<ffffffffffffffff>] 0xffffffffffffffff
 }
 ... key      at: [<ffffffff82674fe8>] __key.35644+0x0/0x8
 -> (hcd_urb_list_lock){......} ops: 0 {
    INITIAL USE at:
                         [<ffffffff81099b08>] __lock_acquire+0x33f/0xc0e
                         [<ffffffff8109a4c5>] lock_acquire+0xee/0x12e
                         [<ffffffff815138f7>] _spin_lock+0x45/0x8e
                         [<ffffffff813bf2a0>] usb_hcd_link_urb_to_ep+0x37/0xc8
                         [<ffffffff813c0a11>] usb_hcd_submit_urb+0x308/0xa03
                         [<ffffffff813c17e1>] usb_submit_urb+0x258/0x2eb
                         [<ffffffff813c3145>] usb_start_wait_urb+0x71/0x1d4
                         [<ffffffff813c3543>] usb_control_msg+0x10c/0x144
                         [<ffffffff813c4812>] usb_get_descriptor+0x83/0xc9
                         [<ffffffff813c48dd>] 
usb_get_device_descriptor+0x85/0xc8
                         [<ffffffff813c0168>] usb_add_hcd+0x472/0x6a8
                         [<ffffffff813cfe2a>] usb_hcd_pci_probe+0x263/0x3bd
                         [<ffffffff8129601f>] local_pci_probe+0x2a/0x42
                         [<ffffffff8107e88f>] do_work_for_cpu+0x27/0x50
                         [<ffffffff81083bcc>] kthread+0xac/0xb4
                         [<ffffffff810161aa>] child_rip+0xa/0x20
                         [<ffffffffffffffff>] 0xffffffffffffffff
  }
  ... key      at: [<ffffffff817edc38>] hcd_urb_list_lock+0x18/0x40
 ... acquired at:
   [<ffffffff8109a242>] __lock_acquire+0xa79/0xc0e
   [<ffffffff8109a4c5>] lock_acquire+0xee/0x12e
   [<ffffffff815138f7>] _spin_lock+0x45/0x8e
   [<ffffffff813bf2a0>] usb_hcd_link_urb_to_ep+0x37/0xc8
   [<ffffffff813db67b>] ehci_urb_enqueue+0xcd/0xd7a
   [<ffffffff813c0f76>] usb_hcd_submit_urb+0x86d/0xa03
   [<ffffffff813c17e1>] usb_submit_urb+0x258/0x2eb
   [<ffffffff813c3145>] usb_start_wait_urb+0x71/0x1d4
   [<ffffffff813c3543>] usb_control_msg+0x10c/0x144
   [<ffffffff813ba1ac>] hub_port_init+0x319/0x7ec
   [<ffffffff813bd7f9>] hub_events+0x94d/0x11e6
   [<ffffffff813be0d8>] hub_thread+0x46/0x1d2
   [<ffffffff81083bcc>] kthread+0xac/0xb4
   [<ffffffff810161aa>] child_rip+0xa/0x20
   [<ffffffffffffffff>] 0xffffffffffffffff


the HARDIRQ-irq-unsafe lock's dependencies:
-> (purge_lock){+.+...} ops: 0 {
   HARDIRQ-ON-W at:
                        [<ffffffff81099a91>] __lock_acquire+0x2c8/0xc0e
                        [<ffffffff8109a4c5>] lock_acquire+0xee/0x12e
                        [<ffffffff815138f7>] _spin_lock+0x45/0x8e
                        [<ffffffff811229b4>] __purge_vmap_area_lazy+0x63/0x198
                        [<ffffffff81124280>] vm_unmap_aliases+0x18f/0x1b2
                        [<ffffffff8100e594>] xen_alloc_ptpage+0x47/0x75
                        [<ffffffff8100e5ff>] xen_alloc_pte+0x13/0x15
                        [<ffffffff81117bdb>] __pte_alloc_kernel+0x6f/0xdd
                        [<ffffffff811237ad>] vmap_page_range_noflush+0x1c5/0x315
                        [<ffffffff8112393e>] map_vm_area+0x41/0x6b
                        [<ffffffff81123a97>] __vmalloc_area_node+0x12f/0x167
                        [<ffffffff81123b5f>] __vmalloc_node+0x90/0xb5
                        [<ffffffff81123dd6>] __vmalloc+0x28/0x3e
                        [<ffffffff81a2db10>] alloc_large_system_hash+0x12c/0x1f8
                        [<ffffffff81a30190>] vfs_caches_init+0xb8/0x140
                       <ffffffff81123dd6>] __vmalloc+0x28/0x3e
                        [<ffffffff81a2db10>] alloc_large_system_hash+0x12c/0x1f8
                        [<ffffffff81a30190>] vfs_caches_init+0xb8/0x140
                        [<ffffffff81a08629>] start_kernel+0x3ef/0x44c
                        [<ffffffff81a07930>] x86_64_start_reservations+0xbb/0xd6
                        [<ffffffff81a0be20>] xen_start_kernel+0x5dc/0x5e3
                        [<ffffffffffffffff>] 0xffffffffffffffff
   INITIAL USE at:
                       [<ffffffff81099b08>] __lock_acquire+0x33f/0xc0e
                       [<ffffffff8109a4c5>] lock_acquire+0xee/0x12e
                       [<ffffffff815138f7>] _spin_lock+0x45/0x8e
                       [<ffffffff811229b4>] __purge_vmap_area_lazy+0x63/0x198
                       [<ffffffff81124280>] vm_unmap_aliases+0x18f/0x1b2
                       [<ffffffff8100e594>] xen_alloc_ptpage+0x47/0x75
                       [<ffffffff8100e5ff>] xen_alloc_pte+0x13/0x15
                       [<ffffffff81117bdb>] __pte_alloc_kernel+0x6f/0xdd
                       [<ffffffff811237ad>] vmap_page_range_noflush+0x1c5/0x315
                       [<ffffffff8112393e>] map_vm_area+0x41/0x6b
                       [<ffffffff81123a97>] __vmalloc_area_node+0x12f/0x167
                       [<ffffffff81123b5f>] __vmalloc_node+0x90/0xb5
                       [<ffffffff81123dd6>] __vmalloc+0x28/0x3e
                       [<ffffffff81a2db10>] alloc_large_system_hash+0x12c/0x1f8
                       [<ffffffff81a30190>] vfs_caches_init+0xb8/0x140
                       [<ffffffff81a08629>] start_kernel+0x3ef/0x44c
                       [<ffffffff81a07930>] x86_64_start_reservations+0xbb/0xd6
                       [<ffffffff81a0be20>] xen_start_kernel+0x5dc/0x5e3
                       [<ffffffffffffffff>] 0xffffffffffffffff
 }
 ... key      at: [<ffffffff817b59c8>] purge_lock.26578+0x18/0x40
 -> (vmap_area_lock){+.+...} ops: 0 {
    HARDIRQ-ON-W at:
                          [<ffffffff81099a91>] __lock_acquire+0x2c8/0xc0e
      x14a/0x20a
                          [<ffffffff81123b46>] __vmalloc_node+0x77/0xb5
                          [<ffffffff81123dd6>] __vmalloc+0x28/0x3e
                          [<ffffffff81a2db10>] 
alloc_large_system_hash+0x12c/0x1f8
                          [<ffffffff81a30190>] vfs_caches_init+0xb8/0x140
                          [<ffffffff81a08629>] start_kernel+0x3ef/0x44c
                          [<ffffffff81a07930>] 
x86_64_start_reservations+0xbb/0xd6
                          [<ffffffff81a0be20>] xen_start_kernel+0x5dc/0x5e3
                          [<ffffffffffffffff>] 0xffffffffffffffff
    SOFTIRQ-ON-W at:
                          [<ffffffff81099ab2>] __lock_acquire+0x2e9/0xc0e
                          [<ffffffff8109a4c5>] lock_acquire+0xee/0x12e
                          [<ffffffff815138f7>] _spin_lock+0x45/0x8e
                          [<ffffffff81122cee>] alloc_vmap_area+0x116/0x28a
                          [<ffffffff81122fac>] __get_vm_area_node+0x14a/0x20a
                          [<ffffffff81123b46>] __vmalloc_node+0x77/0xb5
                          [<ffffffff81123dd6>] __vmalloc+0x28/0x3e
                          [<ffffffff81a2db10>] 
alloc_large_system_hash+0x12c/0x1f8
                          [<ffffffff81a30190>] vfs_caches_init+0xb8/0x140
                          [<ffffffff81a08629>] start_kernel+0x3ef/0x44c
                          [<ffffffff81a07930>] 
x86_64_start_reservations+0xbb/0xd6
                          [<ffffffff81a0be20>] xen_start_kernel+0x5dc/0x5e3
                          [<ffffffffffffffff>] 0xffffffffffffffff
    INITIAL USE at:
                         [<ffffffff81099b08>] __lock_acquire+0x33f/0xc0e
                         [<ffffffff8109a4c5>] lock_acquire+0xee/0x12e
                         [<ffffffff815138f7>] _spin_lock+0x45/0x8e
                         [<ffffffff81122cee>] alloc_vmap_area+0x116/0x28a
                         [<ffffffff81122fac>] __get_vm_area_node+0x14a/0x20a
                         [<ffffffff81123b46>] __vmalloc_node+0x77/0xb5
                         [<ffffffff81123dd6sh+0x12c/0x1f8
                         [<ffffffff81a30190>] vfs_caches_init+0xb8/0x140
                         [<ffffffff81a08629>] start_kernel+0x3ef/0x44c
                         [<ffffffff81a07930>] 
x86_64_start_reservations+0xbb/0xd6
                         [<ffffffff81a0be20>] xen_start_kernel+0x5dc/0x5e3
                         [<ffffffffffffffff>] 0xffffffffffffffff
  }
  ... key      at: [<ffffffff817b5978>] vmap_area_lock+0x18/0x40
  -> (&rnp->lock){..-...} ops: 0 {
     IN-SOFTIRQ-W at:
                            [<ffffffff81099a3e>] __lock_acquire+0x275/0xc0e
                            [<ffffffff8109a4c5>] lock_acquire+0xee/0x12e
                            [<ffffffff81513aca>] _spin_lock_irqsave+0x5d/0xab
                            [<ffffffff810ccbe5>] cpu_quiet+0x38/0xb0
                            [<ffffffff810cd385>] 
__rcu_process_callbacks+0x83/0x259
                            [<ffffffff810cd5b8>] rcu_process_callbacks+0x5d/0x76
                            [<ffffffff8106ec56>] __do_softirq+0xf6/0x1f0
                            [<ffffffff810162ac>] call_softirq+0x1c/0x30
                            [<ffffffff81017d5b>] do_softirq+0x5f/0xd7
                            [<ffffffff8106e56d>] irq_exit+0x66/0xbc
                            [<ffffffff8130a9aa>] 
xen_evtchn_do_upcall+0x18d/0x1bd
                            [<ffffffff810162fe>] 
xen_do_hypervisor_callback+0x1e/0x30
                            [<ffffffffffffffff>] 0xffffffffffffffff
     INITIAL USE at:
                           [<ffffffff81099b08>] __lock_acquire+0x33f/0xc0e
                           [<ffffffff8109a4c5>] lock_acquire+0xee/0x12e
                           [<ffffffff81513aca>] _spin_lock_irqsave+0x5d/0xab
                           [<ffffffff8150e73b>] rcu_init_percpu_data+0x3d/0x18b
                           [<ffffffff8150e8d3>] rcu_cpu_notify+0x4a/0xa7
                           [<ffffffff81a2a055>] __rcu_init+0x168/0x1b3
                           [<ffffffff81a26e52>] rcu_init+0x1c/0x3e
                           [<ffffffff81a084a2>] start_kernel+0x268/0x44c
                           [<ffffffff81a07930>0x5e3
                           [<ffffffffffffffff>] 0xffffffffffffffff
   }
   ... key      at: [<ffffffff8248c080>] __key.20517+0x0/0x8
  ... acquired at:
   [<ffffffff8109a242>] __lock_acquire+0xa79/0xc0e
   [<ffffffff8109a4c5>] lock_acquire+0xee/0x12e
   [<ffffffff81513aca>] _spin_lock_irqsave+0x5d/0xab
   [<ffffffff810cd124>] __call_rcu+0x9d/0x13c
   [<ffffffff810cd229>] call_rcu+0x28/0x3e
   [<ffffffff81122934>] __free_vmap_area+0x7b/0x98
   [<ffffffff81122a9a>] __purge_vmap_area_lazy+0x149/0x198
   [<ffffffff81124280>] vm_unmap_aliases+0x18f/0x1b2
   [<ffffffff8100da26>] xen_create_contiguous_region+0x4a/0xf3
   [<ffffffff8101208c>] xen_swiotlb_alloc_coherent+0x84/0xef
   [<ffffffff813660dc>] dma_alloc_coherent+0xaf/0xec
   [<ffffffff8136623f>] dmam_alloc_coherent+0x67/0xc0
   [<ffffffff813a357f>] ahci_port_start+0x63/0xf6
   [<ffffffff8138ce24>] ata_host_start+0xf4/0x1a9
   [<ffffffff8138d8ec>] ata_host_activate+0x39/0x102
   [<ffffffff813a483e>] ahci_init_one+0xca3/0xcd7
   [<ffffffff8129601f>] local_pci_probe+0x2a/0x42
   [<ffffffff8107e88f>] do_work_for_cpu+0x27/0x50
   [<ffffffff81083bcc>] kthread+0xac/0xb4
   [<ffffffff810161aa>] child_rip+0xa/0x20
   [<ffffffffffffffff>] 0xffffffffffffffff

  -> (&rcu_state.onofflock){..-...} ops: 0 {
     IN-SOFTIRQ-W at:
                            [<ffffffff81099a3e>] __lock_acquire+0x275/0xc0e
                            [<ffffffff8109a4c5>] lock_acquire+0xee/0x12e
                            [<ffffffff815138f7>] _spin_lock+0x45/0x8e
                            [<ffffffff810cca51>] rcu_start_gp+0xc5/0x154
                            [<ffffffff810ccb8e>] cpu_quiet_msk+0xae/0xcd
                            [<ffffffff810ccea8>] rcu_process_dyntick+0xe0/0x11d
                            [<ffffffff810cd006>] 
force_quiescent_state+0x121/0x1a2
                            [<ffffffff810cd34a>] 
__rcu_process_callbacks+0x48/0x259
                            [<ffffffff810cd599>] rcu_process_callbacks+0x3e/0x76
                            [<ffffffff8106ec56>] __do_softirq+0xf6/0x1f0
                     do_softirq+0x5f/0xd7
                            [<ffffffff8106e56d>] irq_exit+0x66/0xbc
                            [<ffffffff8130a9aa>] 
xen_evtchn_do_upcall+0x18d/0x1bd
                            [<ffffffff810162fe>] 
xen_do_hypervisor_callback+0x1e/0x30
                            [<ffffffffffffffff>] 0xffffffffffffffff
     INITIAL USE at:
                           [<ffffffff81099b08>] __lock_acquire+0x33f/0xc0e
                           [<ffffffff8109a4c5>] lock_acquire+0xee/0x12e
                           [<ffffffff815138f7>] _spin_lock+0x45/0x8e
                           [<ffffffff8150e7e4>] rcu_init_percpu_data+0xe6/0x18b
                           [<ffffffff8150e8d3>] rcu_cpu_notify+0x4a/0xa7
                           [<ffffffff81a2a055>] __rcu_init+0x168/0x1b3
                           [<ffffffff81a26e52>] rcu_init+0x1c/0x3e
                           [<ffffffff81a084a2>] start_kernel+0x268/0x44c
                           [<ffffffff81a07930>] 
x86_64_start_reservations+0xbb/0xd6
                           [<ffffffff81a0be20>] xen_start_kernel+0x5dc/0x5e3
                           [<ffffffffffffffff>] 0xffffffffffffffff
   }
   ... key      at: [<ffffffff817b0130>] rcu_state+0x14f0/0x1580
   ... acquired at:
   [<ffffffff8109a242>] __lock_acquire+0xa79/0xc0e
   [<ffffffff8109a4c5>] lock_acquire+0xee/0x12e
   [<ffffffff815138f7>] _spin_lock+0x45/0x8e
   [<ffffffff8150e7f8>] rcu_init_percpu_data+0xfa/0x18b
   [<ffffffff8150e8d3>] rcu_cpu_notify+0x4a/0xa7
   [<ffffffff81a2a055>] __rcu_init+0x168/0x1b3
   [<ffffffff81a26e52>] rcu_init+0x1c/0x3e
   [<ffffffff81a084a2>] start_kernel+0x268/0x44c
   [<ffffffff81a07930>] x86_64_start_reservations+0xbb/0xd6
   [<ffffffff81a0be20>] xen_start_kernel+0x5dc/0x5e3
   [<ffffffffffffffff>] 0xffffffffffffffff

  ... acquired at:
   [<ffffffff8109a242>] __lock_acquire+0xa79/0xc0e
   [<ffffffff8109a4c5>] lock_acquire+0xee/0x12e
   [<ffffffff815138f7>] _spin_lock+0x45/0x8e
   [<ffffffff810cca51>] rcu_start_gp+0xc5/0x154
   [<ffffffff810cd12f>] __call_rcu+0xa8/0x13c
   [<ffffffff810cd229>] call_rcu+p_area_lazy+0x149/0x198
   [<ffffffff81124280>] vm_unmap_aliases+0x18f/0x1b2
   [<ffffffff8100da26>] xen_create_contiguous_region+0x4a/0xf3
   [<ffffffff8101208c>] xen_swiotlb_alloc_coherent+0x84/0xef
   [<ffffffff813660dc>] dma_alloc_coherent+0xaf/0xec
   [<ffffffff8136623f>] dmam_alloc_coherent+0x67/0xc0
   [<ffffffff813a357f>] ahci_port_start+0x63/0xf6
   [<ffffffff8138ce24>] ata_host_start+0xf4/0x1a9
   [<ffffffff8138d8ec>] ata_host_activate+0x39/0x102
   [<ffffffff813a483e>] ahci_init_one+0xca3/0xcd7
   [<ffffffff8129601f>] local_pci_probe+0x2a/0x42
   [<ffffffff8107e88f>] do_work_for_cpu+0x27/0x50
   [<ffffffff81083bcc>] kthread+0xac/0xb4
   [<ffffffff810161aa>] child_rip+0xa/0x20
   [<ffffffffffffffff>] 0xffffffffffffffff

 ... acquired at:
   [<ffffffff8109a242>] __lock_acquire+0xa79/0xc0e
   [<ffffffff8109a4c5>] lock_acquire+0xee/0x12e
   [<ffffffff815138f7>] _spin_lock+0x45/0x8e
   [<ffffffff81122a83>] __purge_vmap_area_lazy+0x132/0x198
   [<ffffffff81124280>] vm_unmap_aliases+0x18f/0x1b2
   [<ffffffff8100da26>] xen_create_contiguous_region+0x4a/0xf3
   [<ffffffff8101208c>] xen_swiotlb_alloc_coherent+0x84/0xef
   [<ffffffff813660dc>] dma_alloc_coherent+0xaf/0xec
   [<ffffffff8136623f>] dmam_alloc_coherent+0x67/0xc0
   [<ffffffff813a357f>] ahci_port_start+0x63/0xf6
   [<ffffffff8138ce24>] ata_host_start+0xf4/0x1a9
   [<ffffffff8138d8ec>] ata_host_activate+0x39/0x102
   [<ffffffff813a483e>] ahci_init_one+0xca3/0xcd7
   [<ffffffff8129601f>] local_pci_probe+0x2a/0x42
   [<ffffffff8107e88f>] do_work_for_cpu+0x27/0x50
   [<ffffffff81083bcc>] kthread+0xac/0xb4
   [<ffffffff810161aa>] child_rip+0xa/0x20
   [<ffffffffffffffff>] 0xffffffffffffffff


stack backtrace:
Pid: 42, comm: khubd Not tainted 2.6.31.6 #8
Call Trace:
 [<ffffffff810996bb>] check_usage+0x29a/0x2bf
 [<ffffffff8109933b>] ? check_noncircular+0xa1/0xe8
 [<ffffffff81099750>] check_irq_usage+0x70/0xe9
 [<ffffffff8109a13c>] __lock_acquire+0x973/0xc0e
 [<ffffffff8109a4c5>] lock_acquire+0xee/0x12e
 [<ffffffff811298c4>] ? dma_pool_alloc+0x45/0x321
 [<ffffffff811298c4>] ? dma_pool_alloc+0x45/0x321
 [<ffffffff81513aca>] _spin_lock_irqsave+0x5d/0xab
 [<ffffffff811298c4>] ? dma_pool_alloc+0x45/0x321
 [<ffffffff81097bc7>] ? add_lock_to_list+0x8a/0xe5
 [<ffffffff811298c4>] dforce_evtchn_callback+0x20/0x36
 [<ffffffff8100f632>] ? check_events+0x12/0x20
 [<ffffffff813d959e>] ehci_qh_alloc+0x37/0xfe
 [<ffffffff8100f61f>] ? xen_restore_fl_direct_end+0x0/0x1
 [<ffffffff813db182>] qh_append_tds+0x4c/0x478
 [<ffffffff815136ce>] ? _spin_unlock+0x3a/0x55
 [<ffffffff813db6a0>] ehci_urb_enqueue+0xf2/0xd7a
 [<ffffffff8100f632>] ? check_events+0x12/0x20
 [<ffffffff813c0600>] ? usb_create_hcd+0x1a4/0x1ba
 [<ffffffff813c0f76>] usb_hcd_submit_urb+0x86d/0xa03
 [<ffffffff8100f61f>] ? xen_restore_fl_direct_end+0x0/0x1
 [<ffffffff8100eb68>] ? xen_force_evtchn_callback+0x20/0x36
 [<ffffffff81098d57>] ? debug_check_no_locks_freed+0x13d/0x16a
 [<ffffffff8100f632>] ? check_events+0x12/0x20
 [<ffffffff8100f61f>] ? xen_restore_fl_direct_end+0x0/0x1
 [<ffffffff810979f8>] ? lockdep_init_map+0xad/0x138
 [<ffffffff813c17e1>] usb_submit_urb+0x258/0x2eb
 [<ffffffff810844c3>] ? __init_waitqueue_head+0x4d/0x76
 [<ffffffff813c3145>] usb_start_wait_urb+0x71/0x1d4
 [<ffffffff813c3543>] usb_control_msg+0x10c/0x144
 [<ffffffff813ba1ac>] hub_port_init+0x319/0x7ec
 [<ffffffff813bd7f9>] hub_events+0x94d/0x11e6
 [<ffffffff8100f632>] ? check_events+0x12/0x20
 [<ffffffff8100eb68>] ? xen_force_evtchn_callback+0x20/0x36
 [<ffffffff813be0d8>] hub_thread+0x46/0x1d2
 [<ffffffff8108401f>] ? autoremove_wake_function+0x0/0x5f
 [<ffffffff813be092>] ? hub_thread+0x0/0x1d2
 [<ffffffff81083bcc>] kthread+0xac/0xb4
 [<ffffffff810161aa>] child_rip+0xa/0x20
 [<ffffffff81015b10>] ? restore_args+0x0/0x30
 [<ffffffff810161a0>] ? child_rip+0x0/0x20
usb 1-5: New USB device found, idVendor=14dd, idProduct=0002
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: Multidevice
usb 1-5: Manufacturer: Peppercon AG
usb 1-5: SerialNumber: 0962b201b34649022DFD5493FE193F22
usb 1-5: configuration #1 chosen from 1 choice
input: Peppercon AG Multidevice as 
/devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5:1.2/input/input3
generic-usb 0003:14DD:0002.0001: input,hidraw0: USB HID v1.01 Mouse [Peppercon 
AG Multidevice] on usb-0000:00:1a.7-5/input2
input: Peppercon AG Multidevice as 
/devices/pci0000:00/0000:00:1a.7/usb1/1-5/1-5:1.3/input/input4
generic-usb 0003:14DD:0002.0002: input,hidraw1: e] on usb-0000:00:1a.7-5/input3

-- Pasi


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.