|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] RE: [Xen-devel] Memory mapping for PEG/PCIe Graphics Passthrough to <any> DomU
I have try with patch, the problem persist, under the output of xm info, xm
dmesg and lspci -v:
lspci -v
00:00.0 Host bridge: Intel Corporation QuickPath Architecture I/O Hub to ESI
Port (rev 13)
Subsystem: ASUSTeK Computer Inc. Device 836b
Flags: fast devsel
Capabilities: [60] Message Signalled Interrupts: Mask+ 64bit-
Queue=0/1 Enable-
Capabilities: [90] Express Root Port (Slot-), MSI 00
Capabilities: [e0] Power Management version 3
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [150] Access Controls <?>
Capabilities: [160] Vendor Specific Information <?>
00:01.0 PCI bridge: Intel Corporation QuickPath Architecture I/O Hub PCI
Express Root Port 1 (rev 13) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device 836b
Capabilities: [60] Message Signalled Interrupts: Mask+ 64bit-
Queue=0/1 Enable+
Capabilities: [90] Express Root Port (Slot+), MSI 00
Capabilities: [e0] Power Management version 3
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [150] Access Controls <?>
Capabilities: [160] Vendor Specific Information <?>
Kernel driver in use: pcieport-driver
00:03.0 PCI bridge: Intel Corporation QuickPath Architecture I/O Hub PCI
Express Root Port 3 (rev 13) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: f8000000-fbbfffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device 836b
Capabilities: [60] Message Signalled Interrupts: Mask+ 64bit-
Queue=0/1 Enable+
Capabilities: [90] Express Root Port (Slot+), MSI 00
Capabilities: [e0] Power Management version 3
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [150] Access Controls <?>
Capabilities: [160] Vendor Specific Information <?>
Kernel driver in use: pcieport-driver
00:07.0 PCI bridge: Intel Corporation QuickPath Architecture I/O Hub PCI
Express Root Port 7 (rev 13) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Device 836b
Capabilities: [60] Message Signalled Interrupts: Mask+ 64bit-
Queue=0/1 Enable+
Capabilities: [90] Express Root Port (Slot+), MSI 00
Capabilities: [e0] Power Management version 3
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [150] Access Controls <?>
Capabilities: [160] Vendor Specific Information <?>
Kernel driver in use: pcieport-driver
00:14.0 PIC: Intel Corporation QuickPath Architecture I/O Hub System
Management Registers (rev 13) (prog-if 00 [8259])
Flags: fast devsel
Capabilities: [40] Express Root Complex Integrated Endpoint, MSI 00
00:14.1 PIC: Intel Corporation QuickPath Architecture I/O Hub GPIO and
Scratch Pad Registers (rev 13) (prog-if 00 [8259])
Flags: fast devsel
Capabilities: [40] Express Root Complex Integrated Endpoint, MSI 00
00:14.2 PIC: Intel Corporation QuickPath Architecture I/O Hub Control Status
and RAS Registers (rev 13) (prog-if 00 [8259])
Flags: fast devsel
Capabilities: [40] Express Root Complex Integrated Endpoint, MSI 00
00:14.3 PIC: Intel Corporation QuickPath Architecture I/O Hub Throttle
Registers (rev 13) (prog-if 00 [8259])
Flags: fast devsel
00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI
Controller #4 (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at a800 [size=32]
Capabilities: [50] PCIe advanced features <?>
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI
Controller #5 (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Flags: bus master, medium devsel, latency 0, IRQ 21
I/O ports at a880 [size=32]
Capabilities: [50] PCIe advanced features <?>
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI
Controller #6 (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at ac00 [size=32]
Capabilities: [50] PCIe advanced features <?>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI
Controller #2 (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Flags: bus master, medium devsel, latency 0, IRQ 18
Memory at f7fff000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCIe advanced features <?>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio
Controller
Subsystem: ASUSTeK Computer Inc. Device 8357
Flags: bus master, fast devsel, latency 0, IRQ 22
Memory at f7ff8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [100] Virtual Channel <?>
Capabilities: [130] Root Complex Link <?>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express
Port 1 (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
Prefetchable memory behind bridge: 00000000f6f00000-00000000f6ffffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable+
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 8357
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport-driver
00:1c.2 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express
Port 3 (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbe00000-fbefffff
Prefetchable memory behind bridge: 00000000f6e00000-00000000f6efffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable+
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 8357
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport-driver
00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express
Port 4 (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fbd00000-fbdfffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable+
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 8357
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport-driver
00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express
Port 5 (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fbc00000-fbcfffff
Capabilities: [40] Express Root Port (Slot+), MSI 00
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable+
Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Device 8357
Capabilities: [a0] Power Management version 2
Capabilities: [100] Virtual Channel <?>
Capabilities: [180] Root Complex Link <?>
Kernel driver in use: pcieport-driver
00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI
Controller #1 (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Flags: bus master, medium devsel, latency 0, IRQ 23
I/O ports at a080 [size=32]
Capabilities: [50] PCIe advanced features <?>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI
Controller #2 (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at a400 [size=32]
Capabilities: [50] PCIe advanced features <?>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI
Controller #3 (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at a480 [size=32]
Capabilities: [50] PCIe advanced features <?>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI
Controller #1 (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device 82d4
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at f7ffe000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCIe advanced features <?>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) (prog-if 01
[Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=08, subordinate=08, sec-latency=32
Capabilities: [50] Subsystem: ASUSTeK Computer Inc. Device 82d4
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface
Controller
Subsystem: ASUSTeK Computer Inc. Device 82d4
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information <?>
00:1f.2 RAID bus controller: Intel Corporation 82801 SATA RAID Controller
Subsystem: ASUSTeK Computer Inc. Device 82d4
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 828
I/O ports at 9c00 [size=8]
I/O ports at 9880 [size=4]
I/O ports at 9800 [size=8]
I/O ports at 9480 [size=4]
I/O ports at 9400 [size=32]
Memory at f7ffc000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/4 Enable+
Capabilities: [70] Power Management version 3
Capabilities: [a8] SATA HBA <?>
Capabilities: [b0] PCIe advanced features <?>
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
Subsystem: ASUSTeK Computer Inc. Device 82d4
Flags: medium devsel, IRQ 18
Memory at f7ffd000 (64-bit, non-prefetchable) [size=256]
I/O ports at 0400 [size=32]
02:00.0 VGA compatible controller: nVidia Corporation Device 0640 (rev a1)
(prog-if 00 [VGA controller])
Flags: bus master, fast devsel, latency 0, IRQ 15
Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
I/O ports at bc00 [size=128]
Expansion ROM at fbb80000 [disabled] [size=512K]
Capabilities: [60] Power Management version 3
Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
Capabilities: [78] Express Endpoint, MSI 00
Capabilities: [b4] Vendor Specific Information <?>
Capabilities: [100] Virtual Channel <?>
Capabilities: [128] Power Budgeting <?>
Capabilities: [600] Vendor Specific Information <?>
04:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363 AHCI
Controller (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device 824f
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at fbcfe000 (32-bit, non-prefetchable) [size=8K]
Expansion ROM at fbce0000 [disabled] [size=64K]
Capabilities: [68] Power Management version 2
Capabilities: [50] Express Legacy Endpoint, MSI 01
Kernel driver in use: ahci
04:00.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363 AHCI
Controller (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device 824f
Flags: bus master, fast devsel, latency 0
I/O ports at cc00 [size=8]
I/O ports at c880 [size=4]
I/O ports at c800 [size=8]
I/O ports at c480 [size=4]
I/O ports at c400 [size=16]
Capabilities: [68] Power Management version 2
05:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. Device 3403 (prog-if 10
[OHCI])
Subsystem: ASUSTeK Computer Inc. Device 8384
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at fbdff000 (64-bit, non-prefetchable) [size=2K]
I/O ports at d800 [size=256]
Capabilities: [50] Power Management version 3
Capabilities: [80] Message Signalled Interrupts: Mask+ 64bit+
Queue=0/0 Enable-
Capabilities: [98] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [130] Device Serial Number 12-90-bd-ff-ff-8c-1e-00
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B
PCI Express Gigabit Ethernet controller (rev 02)
Subsystem: ASUSTeK Computer Inc. Device 82c6
Flags: bus master, fast devsel, latency 0, IRQ 827
I/O ports at e800 [size=256]
Memory at fbeff000 (64-bit, non-prefetchable) [size=4K]
Memory at f6ef0000 (64-bit, prefetchable) [size=64K]
Expansion ROM at fbec0000 [disabled] [size=128K]
Capabilities: [40] Power Management version 3
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable+
Capabilities: [70] Express Endpoint, MSI 01
Capabilities: [b0] MSI-X: Enable- Mask- TabSize=2
Capabilities: [d0] Vital Product Data <?>
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [140] Virtual Channel <?>
Capabilities: [160] Device Serial Number 00-e0-4c-68-00-00-00-03
Kernel driver in use: r8169
xm info
host : vfarm
release : 2.6.31.6-xen
version : #2 SMP Mon Jan 11 14:33:17 CET 2010
machine : x86_64
nr_cpus : 8
nr_nodes : 1
cores_per_socket : 4
threads_per_core : 2
cpu_mhz : 2672
hw_caps :
bfebfbff:28100800:00000000:00001b40:0098e3bd:00000000:00000001:00000000
virt_caps : hvm
total_memory : 6108
free_memory : 5546
node_to_cpu : node0:0-7
node_to_memory : node0:5546
node_to_dma32_mem : node0:2996
xen_major : 4
xen_minor : 0
xen_extra : .0-rc1-pre
xen_caps : xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32
hvm-3.0-x86_32p hvm-3.0-x86_64
xen_scheduler : credit
xen_pagesize : 4096
platform_params : virt_start=0xffff800000000000
xen_changeset : Sat Jan 09 08:14:44 2010 +0000 20779:596f7893b5ac
xen_commandline : dom0_mem=512M iommu=1 iommu_inclusive_mapping=1
cc_compiler : gcc version 4.3.2 (Debian 4.3.2-1.1)
cc_compile_by : root
cc_compile_domain :
cc_compile_date : Mon Jan 11 14:25:59 CET 2010
xend_config_format : 4
vfarm:~# xm dmesg
0x08] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: IOAPIC (id[0x09] address[0xfec8a000] gsi_base[24])
(XEN) IOAPIC[1]: apic_id 9, version 32, address 0xfec8a000, GSI 24-47
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 2 I/O APICs
(XEN) ACPI: HPET id: 0x8086a301 base: 0xfed00000
(XEN) [VT-D]dmar.c:579: Host address width 39
(XEN) [VT-D]dmar.c:588: found ACPI_DMAR_DRHD:
(XEN) [VT-D]dmar.c:374: dmaru->address = fbfff000
(XEN) [VT-D]dmar.c:326: endpoint: 0:1b.0
(XEN) [VT-D]dmar.c:588: found ACPI_DMAR_DRHD:
(XEN) [VT-D]dmar.c:374: dmaru->address = fbffe000
(XEN) [VT-D]dmar.c:331: IOAPIC: f0:1f.7
(XEN) [VT-D]dmar.c:331: IOAPIC: 0:13.0
(XEN) [VT-D]dmar.c:386: flags: INCLUDE_ALL
(XEN) [VT-D]dmar.c:592: found ACPI_DMAR_RMRR:
(XEN) [VT-D]dmar.c:438: RMRR region: base_addr ec000 end_address effff
(XEN) [VT-D]dmar.c:326: endpoint: 0:1d.0
(XEN) [VT-D]dmar.c:326: endpoint: 0:1d.1
(XEN) [VT-D]dmar.c:326: endpoint: 0:1d.2
(XEN) [VT-D]dmar.c:326: endpoint: 0:1d.7
(XEN) [VT-D]dmar.c:326: endpoint: 0:1a.0
(XEN) [VT-D]dmar.c:326: endpoint: 0:1a.1
(XEN) [VT-D]dmar.c:326: endpoint: 0:1a.2
(XEN) [VT-D]dmar.c:326: endpoint: 0:1a.7
(XEN) [VT-D]dmar.c:592: found ACPI_DMAR_RMRR:
(XEN) [VT-D]dmar.c:425: RMRR address range not in reserved memory base =
bf7dc000 end = bf7dbfff; iommu_inclusive_mapping=1 parameter may be needed.
(XEN) [VT-D]dmar.c:438: RMRR region: base_addr bf7dc000 end_address
bf7dbfff
(XEN) [VT-D]dmar.c:326: endpoint: 0:1d.0
(XEN) [VT-D]dmar.c:326: endpoint: 0:1d.1
(XEN) [VT-D]dmar.c:326: endpoint: 0:1d.2
(XEN) [VT-D]dmar.c:326: endpoint: 0:1d.7
(XEN) [VT-D]dmar.c:326: endpoint: 0:1a.0
(XEN) [VT-D]dmar.c:326: endpoint: 0:1a.1
(XEN) [VT-D]dmar.c:326: endpoint: 0:1a.2
(XEN) [VT-D]dmar.c:326: endpoint: 0:1a.7
(XEN) [VT-D]dmar.c:479: The RMRR (bf7dc000, bf7dbfff) is incorrect!
(XEN) Failed to parse ACPI DMAR. Disabling VT-d.
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
(XEN) PCI: Not using MMCONFIG.
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Detected 2672.822 MHz processor.
(XEN) Initing memory sharing.
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 8192K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 0
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging detected.
(XEN) Intel machine check reporting enabled on CPU#0.
(XEN) CPU0: Thermal monitoring enabled (TM1)
(XEN) I/O virtualisation disabled
(XEN) CPU0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
(XEN) Booting processor 1/2 eip 8c000
(XEN) Initializing CPU#1
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 8192K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 1
(XEN) HVM: ASIDs enabled.
(XEN) Intel machine check reporting enabled on CPU#1.
(XEN) CPU1: Thermal monitoring enabled (TM1)
(XEN) CPU1: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
(XEN) Booting processor 2/4 eip 8c000
(XEN) Initializing CPU#2
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 8192K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 2
(XEN) HVM: ASIDs enabled.
(XEN) Intel machine check reporting enabled on CPU#2.
(XEN) CPU2: Thermal monitoring enabled (TM1)
(XEN) CPU2: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
(XEN) Booting processor 3/6 eip 8c000
(XEN) Initializing CPU#3
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 8192K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 3
(XEN) HVM: ASIDs enabled.
(XEN) Intel machine check reporting enabled on CPU#3.
(XEN) CPU3: Thermal monitoring enabled (TM1)
(XEN) CPU3: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
(XEN) Booting processor 4/1 eip 8c000
(XEN) Initializing CPU#4
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 8192K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 0
(XEN) HVM: ASIDs enabled.
(XEN) Intel machine check reporting enabled on CPU#4.
(XEN) CPU4: Thermal monitoring enabled (TM1)
(XEN) CPU4: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
(XEN) Booting processor 5/3 eip 8c000
(XEN) Initializing CPU#5
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 8192K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 1
(XEN) HVM: ASIDs enabled.
(XEN) Intel machine check reporting enabled on CPU#5.
(XEN) CPU5: Thermal monitoring enabled (TM1)
(XEN) CPU5: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
(XEN) Booting processor 6/5 eip 8c000
(XEN) Initializing CPU#6
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 8192K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 2
(XEN) HVM: ASIDs enabled.
(XEN) Intel machine check reporting enabled on CPU#6.
(XEN) CPU6: Thermal monitoring enabled (TM1)
(XEN) CPU6: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
(XEN) Booting processor 7/7 eip 8c000
(XEN) Initializing CPU#7
(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
(XEN) CPU: L2 cache: 256K
(XEN) CPU: L3 cache: 8192K
(XEN) CPU: Physical Processor ID: 0
(XEN) CPU: Processor Core ID: 3
(XEN) HVM: ASIDs enabled.
(XEN) Intel machine check reporting enabled on CPU#7.
(XEN) CPU7: Thermal monitoring enabled (TM1)
(XEN) CPU7: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz stepping 05
(XEN) Total of 8 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) checking TSC synchronization across 8 CPUs: passed.
(XEN) Platform timer is 14.318MHz HPET
(XEN) microcode.c:73:d32767 microcode: CPU1 resumed
(XEN) microcode.c:73:d32767 microcode: CPU6 resumed
(XEN) Brought up 8 CPUs
(XEN) microcode.c:73:d32767 microcode: CPU2 resumed
(XEN) microcode.c:73:d32767 microcode: CPU7 resumed
(XEN) microcode.c:73:d32767 microcode: CPU5 resumed
(XEN) microcode.c:73:d32767 microcode: CPU4 resumed
(XEN) microcode.c:73:d32767 microcode: CPU3 resumed
(XEN) HPET: 4 timers in total, 0 timers will be used for broadcast
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x829000
(XEN) elf_parse_binary: phdr: paddr=0x1829000 memsz=0xe6108
(XEN) elf_parse_binary: phdr: paddr=0x1910000 memsz=0x888
(XEN) elf_parse_binary: phdr: paddr=0x1911000 memsz=0x15ca0
(XEN) elf_parse_binary: phdr: paddr=0x1926ca0 memsz=0x1a9360
(XEN) elf_parse_binary: memory: 0x1000000 -> 0x1ad0000
(XEN) elf_xen_parse_note: GUEST_OS = "linux"
(XEN) elf_xen_parse_note: GUEST_VERSION = "2.6"
(XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0"
(XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000
(XEN) elf_xen_parse_note: ENTRY = 0xffffffff81926ea0
(XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81009000
(XEN) elf_xen_parse_note: FEATURES =
"!writable_page_tables|pae_pgdir_above_4gb"
(XEN) elf_xen_parse_note: PAE_MODE = "yes"
(XEN) elf_xen_parse_note: LOADER = "generic"
(XEN) elf_xen_parse_note: unknown xen elf note (0xd)
(XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1
(XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000
(XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0
(XEN) elf_xen_addr_calc_check: addresses:
(XEN) virt_base = 0xffffffff80000000
(XEN) elf_paddr_offset = 0x0
(XEN) virt_offset = 0xffffffff80000000
(XEN) virt_kstart = 0xffffffff81000000
(XEN) virt_kend = 0xffffffff81ad0000
(XEN) virt_entry = 0xffffffff81926ea0
(XEN) p2m_base = 0xffffffffffffffff
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1ad0000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 00000001b4000000->00000001b8000000 (114688 pages to be
allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff81ad0000
(XEN) Init. ramdisk: ffffffff81ad0000->ffffffff81ed7400
(XEN) Phys-Mach map: ffffffff81ed8000->ffffffff81fd8000
(XEN) Start info: ffffffff81fd8000->ffffffff81fd84b4
(XEN) Page tables: ffffffff81fd9000->ffffffff81fee000
(XEN) Boot stack: ffffffff81fee000->ffffffff81fef000
(XEN) TOTAL: ffffffff80000000->ffffffff82400000
(XEN) ENTRY ADDRESS: ffffffff81926ea0
(XEN) Dom0 has maximum 8 VCPUs
(XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff81829000
(XEN) elf_load_binary: phdr 1 at 0xffffffff81829000 -> 0xffffffff8190f108
(XEN) elf_load_binary: phdr 2 at 0xffffffff81910000 -> 0xffffffff81910888
(XEN) elf_load_binary: phdr 3 at 0xffffffff81911000 -> 0xffffffff81926ca0
(XEN) elf_load_binary: phdr 4 at 0xffffffff81926ca0 -> 0xffffffff819a4000
(XEN) Scrubbing Free RAM:
.......................................................done.
(XEN) Xen trace buffers: disabled
(XEN) tmem: initialized comp=0 global-lock=0
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type \047CTRL-a\047 three times to switch
input to Xen)
(XEN) Freed 156kB init memory.
(XEN) io_apic.c:2291:
(XEN) ioapic_guest_write: apic=0, pin=0, irq=0
(XEN) ioapic_guest_write: new_entry=00010900
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) io_apic.c:2291:
(XEN) ioapic_guest_write: apic=0, pin=2, irq=0
(XEN) ioapic_guest_write: new_entry=00010900
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) irq.c:1431: dom0: pirq 0 or irq 3 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 4 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 5 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 6 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 7 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 8 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 9 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 10 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 11 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 12 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 13 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 14 already mapped
(XEN) irq.c:1431: dom0: pirq 0 or irq 15 already mapped
(XEN) allocated vector for irq:16
(XEN) irq.c:1431: dom0: pirq 0 or irq 16 already mapped
(XEN) allocated vector for irq:17
(XEN) irq.c:1431: dom0: pirq 0 or irq 17 already mapped
(XEN) allocated vector for irq:18
(XEN) irq.c:1431: dom0: pirq 0 or irq 18 already mapped
(XEN) allocated vector for irq:19
(XEN) irq.c:1431: dom0: pirq 0 or irq 19 already mapped
(XEN) allocated vector for irq:20
(XEN) irq.c:1431: dom0: pirq 0 or irq 20 already mapped
(XEN) allocated vector for irq:21
(XEN) irq.c:1431: dom0: pirq 0 or irq 21 already mapped
(XEN) allocated vector for irq:22
(XEN) irq.c:1431: dom0: pirq 0 or irq 22 already mapped
(XEN) allocated vector for irq:23
(XEN) irq.c:1431: dom0: pirq 0 or irq 23 already mapped
(XEN) allocated vector for irq:24
(XEN) irq.c:1431: dom0: pirq 0 or irq 24 already mapped
(XEN) allocated vector for irq:25
(XEN) irq.c:1431: dom0: pirq 0 or irq 25 already mapped
(XEN) allocated vector for irq:26
(XEN) irq.c:1431: dom0: pirq 0 or irq 26 already mapped
(XEN) allocated vector for irq:27
(XEN) irq.c:1431: dom0: pirq 0 or irq 27 already mapped
(XEN) allocated vector for irq:28
(XEN) irq.c:1431: dom0: pirq 0 or irq 28 already mapped
(XEN) allocated vector for irq:29
(XEN) irq.c:1431: dom0: pirq 0 or irq 29 already mapped
(XEN) allocated vector for irq:30
(XEN) irq.c:1431: dom0: pirq 0 or irq 30 already mapped
(XEN) allocated vector for irq:31
(XEN) irq.c:1431: dom0: pirq 0 or irq 31 already mapped
(XEN) allocated vector for irq:32
(XEN) irq.c:1431: dom0: pirq 0 or irq 32 already mapped
(XEN) allocated vector for irq:33
(XEN) irq.c:1431: dom0: pirq 0 or irq 33 already mapped
(XEN) allocated vector for irq:34
(XEN) irq.c:1431: dom0: pirq 0 or irq 34 already mapped
(XEN) allocated vector for irq:35
(XEN) irq.c:1431: dom0: pirq 0 or irq 35 already mapped
(XEN) allocated vector for irq:36
(XEN) irq.c:1431: dom0: pirq 0 or irq 36 already mapped
(XEN) allocated vector for irq:37
(XEN) irq.c:1431: dom0: pirq 0 or irq 37 already mapped
(XEN) allocated vector for irq:38
(XEN) irq.c:1431: dom0: pirq 0 or irq 38 already mapped
(XEN) allocated vector for irq:39
(XEN) irq.c:1431: dom0: pirq 0 or irq 39 already mapped
(XEN) allocated vector for irq:40
(XEN) irq.c:1431: dom0: pirq 0 or irq 40 already mapped
(XEN) allocated vector for irq:41
(XEN) irq.c:1431: dom0: pirq 0 or irq 41 already mapped
(XEN) allocated vector for irq:42
(XEN) irq.c:1431: dom0: pirq 0 or irq 42 already mapped
(XEN) allocated vector for irq:43
(XEN) irq.c:1431: dom0: pirq 0 or irq 43 already mapped
(XEN) allocated vector for irq:44
(XEN) irq.c:1431: dom0: pirq 0 or irq 44 already mapped
(XEN) allocated vector for irq:45
(XEN) irq.c:1431: dom0: pirq 0 or irq 45 already mapped
(XEN) allocated vector for irq:46
(XEN) irq.c:1431: dom0: pirq 0 or irq 46 already mapped
(XEN) allocated vector for irq:47
(XEN) irq.c:1431: dom0: pirq 0 or irq 47 already mapped
(XEN) io_apic.c:2291:
(XEN) ioapic_guest_write: apic=0, pin=0, irq=0
(XEN) ioapic_guest_write: new_entry=00000900
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) PCI add device 00:00.0
(XEN) PCI add device 00:01.0
(XEN) PCI add device 00:03.0
(XEN) PCI add device 00:07.0
(XEN) PCI add device 00:14.0
(XEN) PCI add device 00:14.1
(XEN) PCI add device 00:14.2
(XEN) PCI add device 00:14.3
(XEN) PCI add device 00:1a.0
(XEN) PCI add device 00:1a.1
(XEN) PCI add device 00:1a.2
(XEN) PCI add device 00:1a.7
(XEN) PCI add device 00:1b.0
(XEN) PCI add device 00:1c.0
(XEN) PCI add device 00:1c.2
(XEN) PCI add device 00:1c.3
(XEN) PCI add device 00:1c.4
(XEN) PCI add device 00:1d.0
(XEN) PCI add device 00:1d.1
(XEN) PCI add device 00:1d.2
(XEN) PCI add device 00:1d.7
(XEN) PCI add device 00:1e.0
(XEN) PCI add device 00:1f.0
(XEN) PCI add device 00:1f.2
(XEN) PCI add device 00:1f.3
(XEN) PCI add device 02:00.0
(XEN) PCI add device 06:00.0
(XEN) PCI add device 05:00.0
(XEN) PCI add device 04:00.0
(XEN) PCI add device 04:00.1
(XEN) Set CPU acpi_id(1) cpuid(0) Px State info:
(XEN) _PPC: 0
(XEN) Set CPU acpi_id(2) cpuid(1) Px State info:
(XEN) _PPC: 0
(XEN) Set CPU acpi_id(3) cpuid(2) Px State info:
(XEN) _PPC: 0
(XEN) Set CPU acpi_id(4) cpuid(3) Px State info:
(XEN) _PPC: 0
(XEN) Set CPU acpi_id(5) cpuid(4) Px State info:
(XEN) _PPC: 0
(XEN) Set CPU acpi_id(6) cpuid(5) Px State info:
(XEN) _PPC: 0
(XEN) Set CPU acpi_id(7) cpuid(6) Px State info:
(XEN) _PPC: 0
(XEN) Set CPU acpi_id(8) cpuid(7) Px State info:
(XEN) _PPC: 0
(XEN) io_apic.c:2291:
(XEN) ioapic_guest_write: apic=0, pin=16, irq=16
(XEN) ioapic_guest_write: new_entry=0001a910
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) io_apic.c:2291:
(XEN) ioapic_guest_write: apic=0, pin=23, irq=23
(XEN) ioapic_guest_write: new_entry=0001a917
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) io_apic.c:2291:
(XEN) ioapic_guest_write: apic=0, pin=19, irq=19
(XEN) ioapic_guest_write: new_entry=0001a913
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) io_apic.c:2291:
(XEN) ioapic_guest_write: apic=0, pin=18, irq=18
(XEN) ioapic_guest_write: new_entry=0001a912
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
(XEN) io_apic.c:2291:
(XEN) ioapic_guest_write: apic=0, pin=18, irq=18
(XEN) ioapic_guest_write: new_entry=0001a912
(XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ!
Han, Weidong wrote:
>
> Fantu,
>
> Can you try with the attached patch? and pls post the output of "lspci
> -v"?
>
> Regards,
> Weidong
>
> From: xen-devel-bounces@xxxxxxxxxxxxxxxxxxx
> [mailto:xen-devel-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Weidong Han
> Sent: Friday, January 08, 2010 10:46 AM
> To: Pasi KÃrkkÃinen
> Cc: xen-devel@xxxxxxxxxxxxxxxxxxx; Fantu
> Subject: Re: [Xen-devel] Memory mapping for PEG/PCIe Graphics Passthrough
> to <any> DomU
>
> Pasi KÃrkkÃinen wrote:
>
> On Thu, Jan 07, 2010 at 08:14:47AM -0800, Fantu wrote:
>
>
>
> i have grub2 also here and i have add dummy=foo before root...
>
>
>
> xm dmesg
>
> ])
>
> (XEN) [VT-D]dmar.c:548: Host address width 39
>
> (XEN) [VT-D]dmar.c:557: found ACPI_DMAR_DRHD:
>
> (XEN) [VT-D]dmar.c:374: dmaru->address = fbfff000
>
> (XEN) [VT-D]dmar.c:326: endpoint: 0:1b.0
>
> (XEN) [VT-D]dmar.c:557: found ACPI_DMAR_DRHD:
>
> (XEN) [VT-D]dmar.c:374: dmaru->address = fbffe000
>
> (XEN) [VT-D]dmar.c:331: IOAPIC: f0:1f.7
>
> (XEN) [VT-D]dmar.c:331: IOAPIC: 0:13.0
>
> (XEN) [VT-D]dmar.c:386: flags: INCLUDE_ALL
>
> (XEN) [VT-D]dmar.c:561: found ACPI_DMAR_RMRR:
>
> (XEN) [VT-D]dmar.c:446: RMRR region: base_addr ec000 end_address effff
>
> (XEN) [VT-D]dmar.c:326: endpoint: 0:1d.0
>
> (XEN) [VT-D]dmar.c:326: endpoint: 0:1d.1
>
> (XEN) [VT-D]dmar.c:326: endpoint: 0:1d.2
>
> (XEN) [VT-D]dmar.c:326: endpoint: 0:1d.7
>
> (XEN) [VT-D]dmar.c:326: endpoint: 0:1a.0
>
> (XEN) [VT-D]dmar.c:326: endpoint: 0:1a.1
>
> (XEN) [VT-D]dmar.c:326: endpoint: 0:1a.2
>
> (XEN) [VT-D]dmar.c:326: endpoint: 0:1a.7
>
> (XEN) [VT-D]dmar.c:561: found ACPI_DMAR_RMRR:
>
> (XEN) [VT-D]dmar.c:417: RMRR error: base_addr bf7dc000 end_address
> bf7dbfff
>
> (XEN) Failed to parse ACPI DMAR. Disabling VT-d.
>
>
>
>
>
>
>
> This looks like you have a buggy BIOS, it doesn't have correct DMAR RMRR
> table..
>
>
>
> When RMRR address range is not in reserved memory (BIOS issue), can use
>
> 'iommu_inclusive_mapping=1' to work around it.
>
>
>
> So try that options for xen.gz in grub config.
>
>
>
> http://wiki.xensource.com/xenwiki/VTdHowTo
>
>
>
>
>
>
> yes, obviously the RMRR is setting incorrectly in BIOS. The base address
> shouldn't be greater than end address. "iommu_inclusive_mapping=1" cannot
> help here. You should report this issue to the vendor and ask for a
> correct BIOS.
>
> Regards,
> Weidong
>
>
>
>
>
>
> _______________________________________________
>
> Xen-devel mailing list
>
> Xen-devel@xxxxxxxxxxxxxxxxxxx<mailto:Xen-devel@xxxxxxxxxxxxxxxxxxx>
>
> http://lists.xensource.com/xen-devel
>
>
>
>
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel
>
>
--
View this message in context:
http://old.nabble.com/Memory-mapping-for-PEG-PCIe-Graphics-Passthrough-to-%3Cany%3E-DomU-tp22783371p27111077.html
Sent from the Xen - Dev mailing list archive at Nabble.com.
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |