|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH 4 of 10] New/Updated drivers: Intel TCO Timer/Watchdog driver backported from Linux Kernel Ver. 2.6.29.2
# HG changeset patch
# User root@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
# Date 1259015859 -3600
# Node ID 0ee2f293ec4c52c01fdbc65f8e274e52c9ba3cc2
# Parent 1db1bb63824b25f97d127449faeb3a56f1272c97
Intel TCO Timer/Watchdog driver backported
from Linux Kernel Ver. 2.6.29.2
Signed-off-by: Daniel Kiper <dkiper@xxxxxxxxxxxx>
diff -r 1db1bb63824b -r 0ee2f293ec4c buildconfigs/linux-defconfig_xen_x86_32
--- a/buildconfigs/linux-defconfig_xen_x86_32 Mon Nov 23 07:32:47 2009 +0000
+++ b/buildconfigs/linux-defconfig_xen_x86_32 Mon Nov 23 23:37:39 2009 +0100
@@ -1900,7 +1900,8 @@ CONFIG_IBMASR=m
CONFIG_IBMASR=m
CONFIG_WAFER_WDT=m
CONFIG_I6300ESB_WDT=m
-CONFIG_I8XX_TCO=m
+CONFIG_ITCO_WDT=m
+CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_SC1200_WDT=m
CONFIG_SCx200_WDT=m
CONFIG_60XX_WDT=m
diff -r 1db1bb63824b -r 0ee2f293ec4c buildconfigs/linux-defconfig_xen_x86_64
--- a/buildconfigs/linux-defconfig_xen_x86_64 Mon Nov 23 07:32:47 2009 +0000
+++ b/buildconfigs/linux-defconfig_xen_x86_64 Mon Nov 23 23:37:39 2009 +0100
@@ -1778,7 +1778,8 @@ CONFIG_IBMASR=m
CONFIG_IBMASR=m
CONFIG_WAFER_WDT=m
CONFIG_I6300ESB_WDT=m
-CONFIG_I8XX_TCO=m
+CONFIG_ITCO_WDT=m
+CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_SC1200_WDT=m
CONFIG_60XX_WDT=m
CONFIG_SBC8360_WDT=m
diff -r 1db1bb63824b -r 0ee2f293ec4c drivers/char/watchdog/Kconfig
--- a/drivers/char/watchdog/Kconfig Mon Nov 23 07:32:47 2009 +0000
+++ b/drivers/char/watchdog/Kconfig Mon Nov 23 23:37:39 2009 +0100
@@ -280,15 +280,18 @@ config I6300ESB_WDT
To compile this driver as a module, choose M here: the
module will be called i6300esb.
-config I8XX_TCO
- tristate "Intel i8xx TCO Timer/Watchdog"
+config ITCO_WDT
+ tristate "Intel TCO Timer/Watchdog"
depends on WATCHDOG && (X86 || IA64) && PCI
---help---
- Hardware driver for the TCO timer built into the Intel 82801
- I/O Controller Hub family. The TCO (Total Cost of Ownership)
- timer is a watchdog timer that will reboot the machine after
- its second expiration. The expiration time can be configured
- with the "heartbeat" parameter.
+ Hardware driver for the intel TCO timer based watchdog devices.
+ These drivers are included in the Intel 82801 I/O Controller
+ Hub family (from ICH0 up to ICH10) and in the Intel 63xxESB
+ controller hub.
+
+ The TCO (Total Cost of Ownership) timer is a watchdog timer
+ that will reboot the machine after its second expiration. The
+ expiration time can be configured with the "heartbeat" parameter.
On some motherboards the driver may fail to reset the chipset's
NO_REBOOT flag which prevents the watchdog from rebooting the
@@ -296,7 +299,15 @@ config I8XX_TCO
"failed to reset NO_REBOOT flag, reboot disabled by hardware".
To compile this driver as a module, choose M here: the
- module will be called i8xx_tco.
+ module will be called iTCO_wdt.
+
+config ITCO_VENDOR_SUPPORT
+ bool "Intel TCO Timer/Watchdog Specific Vendor Support"
+ depends on ITCO_WDT
+ ---help---
+ Add vendor specific support to the intel TCO timer based watchdog
+ devices. At this moment we only have additional support for some
+ SuperMicro Inc. motherboards.
config SC1200_WDT
tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog"
diff -r 1db1bb63824b -r 0ee2f293ec4c drivers/char/watchdog/Makefile
--- a/drivers/char/watchdog/Makefile Mon Nov 23 07:32:47 2009 +0000
+++ b/drivers/char/watchdog/Makefile Mon Nov 23 23:37:39 2009 +0100
@@ -44,7 +44,10 @@ obj-$(CONFIG_IBMASR) += ibmasr.o
obj-$(CONFIG_IBMASR) += ibmasr.o
obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o
obj-$(CONFIG_I6300ESB_WDT) += i6300esb.o
-obj-$(CONFIG_I8XX_TCO) += i8xx_tco.o
+obj-$(CONFIG_ITCO_WDT) += iTCO_wdt.o
+ifeq ($(CONFIG_ITCO_VENDOR_SUPPORT),y)
+obj-$(CONFIG_ITCO_WDT) += iTCO_vendor_support.o
+endif
obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o
obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o
obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o
diff -r 1db1bb63824b -r 0ee2f293ec4c drivers/char/watchdog/iTCO_vendor.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/drivers/char/watchdog/iTCO_vendor.h Mon Nov 23 23:37:39 2009 +0100
@@ -0,0 +1,15 @@
+/* iTCO Vendor Specific Support hooks */
+#ifdef CONFIG_ITCO_VENDOR_SUPPORT
+extern void iTCO_vendor_pre_start(unsigned long, unsigned int);
+extern void iTCO_vendor_pre_stop(unsigned long);
+extern void iTCO_vendor_pre_keepalive(unsigned long, unsigned int);
+extern void iTCO_vendor_pre_set_heartbeat(unsigned int);
+extern int iTCO_vendor_check_noreboot_on(void);
+#else
+#define iTCO_vendor_pre_start(acpibase, heartbeat) {}
+#define iTCO_vendor_pre_stop(acpibase) {}
+#define iTCO_vendor_pre_keepalive(acpibase, heartbeat) {}
+#define iTCO_vendor_pre_set_heartbeat(heartbeat) {}
+#define iTCO_vendor_check_noreboot_on() 1
+ /* 1=check noreboot; 0=don't check */
+#endif
diff -r 1db1bb63824b -r 0ee2f293ec4c drivers/char/watchdog/iTCO_vendor_support.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/drivers/char/watchdog/iTCO_vendor_support.c Mon Nov 23 23:37:39
2009 +0100
@@ -0,0 +1,312 @@
+/*
+ * intel TCO vendor specific watchdog driver support
+ *
+ * (c) Copyright 2006-2009 Wim Van Sebroeck <wim@xxxxxxxxx>.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Neither Wim Van Sebroeck nor Iguana vzw. admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ */
+
+/*
+ * Includes, defines, variables, module parameters, ...
+ */
+
+/* Module and version information */
+#define DRV_NAME "iTCO_vendor_support"
+#define DRV_VERSION "1.03"
+#define PFX DRV_NAME ": "
+
+/* Includes */
+#include <linux/module.h> /* For module specific items */
+#include <linux/moduleparam.h> /* For new moduleparam's */
+#include <linux/types.h> /* For standard types (like size_t) */
+#include <linux/errno.h> /* For the -ENODEV/... values */
+#include <linux/kernel.h> /* For printk/panic/... */
+#include <linux/init.h> /* For __init/__exit/... */
+#include <linux/ioport.h> /* For io-port access */
+#include <linux/io.h> /* For inb/outb/... */
+
+#include "iTCO_vendor.h"
+
+/* iTCO defines */
+#define SMI_EN acpibase + 0x30 /* SMI Control and Enable
Register */
+#define TCOBASE acpibase + 0x60 /* TCO base address */
+#define TCO1_STS TCOBASE + 0x04 /* TCO1 Status Register */
+
+/* List of vendor support modes */
+/* SuperMicro Pentium 3 Era 370SSE+-OEM1/P3TSSE */
+#define SUPERMICRO_OLD_BOARD 1
+/* SuperMicro Pentium 4 / Xeon 4 / EMT64T Era Systems */
+#define SUPERMICRO_NEW_BOARD 2
+
+static int vendorsupport;
+module_param(vendorsupport, int, 0);
+MODULE_PARM_DESC(vendorsupport, "iTCO vendor specific support mode, default=0
(none), 1=SuperMicro Pent3, 2=SuperMicro Pent4+");
+
+/*
+ * Vendor Specific Support
+ */
+
+/*
+ * Vendor Support: 1
+ * Board: Super Micro Computer Inc. 370SSE+-OEM1/P3TSSE
+ * iTCO chipset: ICH2
+ *
+ * Code contributed by: R. Seretny <lkpatches@xxxxxxxxx>
+ * Documentation obtained by R. Seretny from SuperMicro Technical Support
+ *
+ * To enable Watchdog function:
+ * BIOS setup -> Power -> TCO Logic SMI Enable -> Within5Minutes
+ * This setting enables SMI to clear the watchdog expired flag.
+ * If BIOS or CPU fail which may cause SMI hang, then system will
+ * reboot. When application starts to use watchdog function,
+ * application has to take over the control from SMI.
+ *
+ * For P3TSSE, J36 jumper needs to be removed to enable the Watchdog
+ * function.
+ *
+ * Note: The system will reboot when Expire Flag is set TWICE.
+ * So, if the watchdog timer is 20 seconds, then the maximum hang
+ * time is about 40 seconds, and the minimum hang time is about
+ * 20.6 seconds.
+ */
+
+static void supermicro_old_pre_start(unsigned long acpibase)
+{
+ unsigned long val32;
+
+ /* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */
+ val32 = inl(SMI_EN);
+ val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */
+ outl(val32, SMI_EN); /* Needed to activate watchdog */
+}
+
+static void supermicro_old_pre_stop(unsigned long acpibase)
+{
+ unsigned long val32;
+
+ /* Bit 13: TCO_EN -> 1 = Enables the TCO logic to generate SMI# */
+ val32 = inl(SMI_EN);
+ val32 |= 0x00002000; /* Turn on SMI clearing watchdog */
+ outl(val32, SMI_EN); /* Needed to deactivate watchdog */
+}
+
+static void supermicro_old_pre_keepalive(unsigned long acpibase)
+{
+ /* Reload TCO Timer (done in iTCO_wdt_keepalive) + */
+ /* Clear "Expire Flag" (Bit 3 of TC01_STS register) */
+ outb(0x08, TCO1_STS);
+}
+
+/*
+ * Vendor Support: 2
+ * Board: Super Micro Computer Inc. P4SBx, P4DPx
+ * iTCO chipset: ICH4
+ *
+ * Code contributed by: R. Seretny <lkpatches@xxxxxxxxx>
+ * Documentation obtained by R. Seretny from SuperMicro Technical Support
+ *
+ * To enable Watchdog function:
+ * 1. BIOS
+ * For P4SBx:
+ * BIOS setup -> Advanced -> Integrated Peripherals -> Watch Dog Feature
+ * For P4DPx:
+ * BIOS setup -> Advanced -> I/O Device Configuration -> Watch Dog
+ * This setting enables or disables Watchdog function. When enabled, the
+ * default watchdog timer is set to be 5 minutes (about 4m35s). It is
+ * enough to load and run the OS. The application (service or driver) has
+ * to take over the control once OS is running up and before watchdog
+ * expires.
+ *
+ * 2. JUMPER
+ * For P4SBx: JP39
+ * For P4DPx: JP37
+ * This jumper is used for safety. Closed is enabled. This jumper
+ * prevents user enables watchdog in BIOS by accident.
+ *
+ * To enable Watch Dog function, both BIOS and JUMPER must be enabled.
+ *
+ * The documentation lists motherboards P4SBx and P4DPx series as of
+ * 20-March-2002. However, this code works flawlessly with much newer
+ * motherboards, such as my X6DHR-8G2 (SuperServer 6014H-82).
+ *
+ * The original iTCO driver as written does not actually reset the
+ * watchdog timer on these machines, as a result they reboot after five
+ * minutes.
+ *
+ * NOTE: You may leave the Watchdog function disabled in the SuperMicro
+ * BIOS to avoid a "boot-race"... This driver will enable watchdog
+ * functionality even if it's disabled in the BIOS once the /dev/watchdog
+ * file is opened.
+ */
+
+/* I/O Port's */
+#define SM_REGINDEX 0x2e /* SuperMicro ICH4+ Register Index */
+#define SM_DATAIO 0x2f /* SuperMicro ICH4+ Register Data I/O */
+
+/* Control Register's */
+#define SM_CTLPAGESW 0x07 /* SuperMicro ICH4+ Control Page Switch */
+#define SM_CTLPAGE 0x08 /* SuperMicro ICH4+ Control Page Num */
+
+#define SM_WATCHENABLE 0x30 /* Watchdog enable: Bit 0: 0=off, 1=on */
+
+#define SM_WATCHPAGE 0x87 /* Watchdog unlock control page */
+
+#define SM_ENDWATCH 0xAA /* Watchdog lock control page */
+
+#define SM_COUNTMODE 0xf5 /* Watchdog count mode select */
+ /* (Bit 3: 0 = seconds, 1 = minutes */
+
+#define SM_WATCHTIMER 0xf6 /* 8-bits, Watchdog timer counter (RW) */
+
+#define SM_RESETCONTROL 0xf7 /* Watchdog reset control */
+ /* Bit 6: timer is reset by kbd interrupt */
+ /* Bit 7: timer is reset by mouse interrupt */
+
+static void supermicro_new_unlock_watchdog(void)
+{
+ /* Write 0x87 to port 0x2e twice */
+ outb(SM_WATCHPAGE, SM_REGINDEX);
+ outb(SM_WATCHPAGE, SM_REGINDEX);
+ /* Switch to watchdog control page */
+ outb(SM_CTLPAGESW, SM_REGINDEX);
+ outb(SM_CTLPAGE, SM_DATAIO);
+}
+
+static void supermicro_new_lock_watchdog(void)
+{
+ outb(SM_ENDWATCH, SM_REGINDEX);
+}
+
+static void supermicro_new_pre_start(unsigned int heartbeat)
+{
+ unsigned int val;
+
+ supermicro_new_unlock_watchdog();
+
+ /* Watchdog timer setting needs to be in seconds*/
+ outb(SM_COUNTMODE, SM_REGINDEX);
+ val = inb(SM_DATAIO);
+ val &= 0xF7;
+ outb(val, SM_DATAIO);
+
+ /* Write heartbeat interval to WDOG */
+ outb(SM_WATCHTIMER, SM_REGINDEX);
+ outb((heartbeat & 255), SM_DATAIO);
+
+ /* Make sure keyboard/mouse interrupts don't interfere */
+ outb(SM_RESETCONTROL, SM_REGINDEX);
+ val = inb(SM_DATAIO);
+ val &= 0x3f;
+ outb(val, SM_DATAIO);
+
+ /* enable watchdog by setting bit 0 of Watchdog Enable to 1 */
+ outb(SM_WATCHENABLE, SM_REGINDEX);
+ val = inb(SM_DATAIO);
+ val |= 0x01;
+ outb(val, SM_DATAIO);
+
+ supermicro_new_lock_watchdog();
+}
+
+static void supermicro_new_pre_stop(void)
+{
+ unsigned int val;
+
+ supermicro_new_unlock_watchdog();
+
+ /* disable watchdog by setting bit 0 of Watchdog Enable to 0 */
+ outb(SM_WATCHENABLE, SM_REGINDEX);
+ val = inb(SM_DATAIO);
+ val &= 0xFE;
+ outb(val, SM_DATAIO);
+
+ supermicro_new_lock_watchdog();
+}
+
+static void supermicro_new_pre_set_heartbeat(unsigned int heartbeat)
+{
+ supermicro_new_unlock_watchdog();
+
+ /* reset watchdog timeout to heartveat value */
+ outb(SM_WATCHTIMER, SM_REGINDEX);
+ outb((heartbeat & 255), SM_DATAIO);
+
+ supermicro_new_lock_watchdog();
+}
+
+/*
+ * Generic Support Functions
+ */
+
+void iTCO_vendor_pre_start(unsigned long acpibase,
+ unsigned int heartbeat)
+{
+ if (vendorsupport == SUPERMICRO_OLD_BOARD)
+ supermicro_old_pre_start(acpibase);
+ else if (vendorsupport == SUPERMICRO_NEW_BOARD)
+ supermicro_new_pre_start(heartbeat);
+}
+EXPORT_SYMBOL(iTCO_vendor_pre_start);
+
+void iTCO_vendor_pre_stop(unsigned long acpibase)
+{
+ if (vendorsupport == SUPERMICRO_OLD_BOARD)
+ supermicro_old_pre_stop(acpibase);
+ else if (vendorsupport == SUPERMICRO_NEW_BOARD)
+ supermicro_new_pre_stop();
+}
+EXPORT_SYMBOL(iTCO_vendor_pre_stop);
+
+void iTCO_vendor_pre_keepalive(unsigned long acpibase, unsigned int heartbeat)
+{
+ if (vendorsupport == SUPERMICRO_OLD_BOARD)
+ supermicro_old_pre_keepalive(acpibase);
+ else if (vendorsupport == SUPERMICRO_NEW_BOARD)
+ supermicro_new_pre_set_heartbeat(heartbeat);
+}
+EXPORT_SYMBOL(iTCO_vendor_pre_keepalive);
+
+void iTCO_vendor_pre_set_heartbeat(unsigned int heartbeat)
+{
+ if (vendorsupport == SUPERMICRO_NEW_BOARD)
+ supermicro_new_pre_set_heartbeat(heartbeat);
+}
+EXPORT_SYMBOL(iTCO_vendor_pre_set_heartbeat);
+
+int iTCO_vendor_check_noreboot_on(void)
+{
+ switch (vendorsupport) {
+ case SUPERMICRO_OLD_BOARD:
+ return 0;
+ default:
+ return 1;
+ }
+}
+EXPORT_SYMBOL(iTCO_vendor_check_noreboot_on);
+
+static int __init iTCO_vendor_init_module(void)
+{
+ printk(KERN_INFO PFX "vendor-support=%d\n", vendorsupport);
+ return 0;
+}
+
+static void __exit iTCO_vendor_exit_module(void)
+{
+ printk(KERN_INFO PFX "Module Unloaded\n");
+}
+
+module_init(iTCO_vendor_init_module);
+module_exit(iTCO_vendor_exit_module);
+
+MODULE_AUTHOR("Wim Van Sebroeck <wim@xxxxxxxxx>, R. Seretny
<lkpatches@xxxxxxxxx>");
+MODULE_DESCRIPTION("Intel TCO Vendor Specific WatchDog Timer Driver Support");
+MODULE_VERSION(DRV_VERSION);
+MODULE_LICENSE("GPL");
+
diff -r 1db1bb63824b -r 0ee2f293ec4c drivers/char/watchdog/iTCO_wdt.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/drivers/char/watchdog/iTCO_wdt.c Mon Nov 23 23:37:39 2009 +0100
@@ -0,0 +1,857 @@
+/*
+ * intel TCO Watchdog Driver (Used in i82801 and i63xxESB chipsets)
+ *
+ * (c) Copyright 2006-2009 Wim Van Sebroeck <wim@xxxxxxxxx>.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Neither Wim Van Sebroeck nor Iguana vzw. admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ *
+ * The TCO watchdog is implemented in the following I/O controller hubs:
+ * (See the intel documentation on http://developer.intel.com.)
+ * 82801AA (ICH) : document number 290655-003, 290677-014,
+ * 82801AB (ICHO) : document number 290655-003, 290677-014,
+ * 82801BA (ICH2) : document number 290687-002, 298242-027,
+ * 82801BAM (ICH2-M) : document number 290687-002, 298242-027,
+ * 82801CA (ICH3-S) : document number 290733-003, 290739-013,
+ * 82801CAM (ICH3-M) : document number 290716-001, 290718-007,
+ * 82801DB (ICH4) : document number 290744-001, 290745-025,
+ * 82801DBM (ICH4-M) : document number 252337-001, 252663-008,
+ * 82801E (C-ICH) : document number 273599-001, 273645-002,
+ * 82801EB (ICH5) : document number 252516-001, 252517-028,
+ * 82801ER (ICH5R) : document number 252516-001, 252517-028,
+ * 6300ESB (6300ESB) : document number 300641-004, 300884-013,
+ * 82801FB (ICH6) : document number 301473-002, 301474-026,
+ * 82801FR (ICH6R) : document number 301473-002, 301474-026,
+ * 82801FBM (ICH6-M) : document number 301473-002, 301474-026,
+ * 82801FW (ICH6W) : document number 301473-001, 301474-026,
+ * 82801FRW (ICH6RW) : document number 301473-001, 301474-026,
+ * 631xESB (631xESB) : document number 313082-001, 313075-006,
+ * 632xESB (632xESB) : document number 313082-001, 313075-006,
+ * 82801GB (ICH7) : document number 307013-003, 307014-024,
+ * 82801GR (ICH7R) : document number 307013-003, 307014-024,
+ * 82801GDH (ICH7DH) : document number 307013-003, 307014-024,
+ * 82801GBM (ICH7-M) : document number 307013-003, 307014-024,
+ * 82801GHM (ICH7-M DH) : document number 307013-003, 307014-024,
+ * 82801GU (ICH7-U) : document number 307013-003, 307014-024,
+ * 82801HB (ICH8) : document number 313056-003, 313057-017,
+ * 82801HR (ICH8R) : document number 313056-003, 313057-017,
+ * 82801HBM (ICH8M) : document number 313056-003, 313057-017,
+ * 82801HH (ICH8DH) : document number 313056-003, 313057-017,
+ * 82801HO (ICH8DO) : document number 313056-003, 313057-017,
+ * 82801HEM (ICH8M-E) : document number 313056-003, 313057-017,
+ * 82801IB (ICH9) : document number 316972-004, 316973-012,
+ * 82801IR (ICH9R) : document number 316972-004, 316973-012,
+ * 82801IH (ICH9DH) : document number 316972-004, 316973-012,
+ * 82801IO (ICH9DO) : document number 316972-004, 316973-012,
+ * 82801IBM (ICH9M) : document number 316972-004, 316973-012,
+ * 82801IEM (ICH9M-E) : document number 316972-004, 316973-012,
+ * 82801JIB (ICH10) : document number 319973-002, 319974-002,
+ * 82801JIR (ICH10R) : document number 319973-002, 319974-002,
+ * 82801JD (ICH10D) : document number 319973-002, 319974-002,
+ * 82801JDO (ICH10DO) : document number 319973-002, 319974-002
+ */
+
+/*
+ * Includes, defines, variables, module parameters, ...
+ */
+
+/* Module and version information */
+#define DRV_NAME "iTCO_wdt"
+#define DRV_VERSION "1.05"
+#define PFX DRV_NAME ": "
+
+/* Includes */
+#include <linux/module.h> /* For module specific items */
+#include <linux/moduleparam.h> /* For new moduleparam's */
+#include <linux/types.h> /* For standard types (like size_t) */
+#include <linux/errno.h> /* For the -ENODEV/... values */
+#include <linux/kernel.h> /* For printk/panic/... */
+#include <linux/miscdevice.h> /* For MODULE_ALIAS_MISCDEV
+ (WATCHDOG_MINOR) */
+#include <linux/watchdog.h> /* For the watchdog specific items */
+#include <linux/init.h> /* For __init/__exit/... */
+#include <linux/fs.h> /* For file operations */
+#include <linux/platform_device.h> /* For platform_driver framework */
+#include <linux/pci.h> /* For pci functions */
+#include <linux/ioport.h> /* For io-port access */
+#include <linux/spinlock.h> /* For spin_lock/spin_unlock/... */
+#include <linux/uaccess.h> /* For copy_to_user/put_user/... */
+#include <linux/io.h> /* For inb/outb/... */
+
+#include "iTCO_vendor.h"
+
+/* TCO related info */
+enum iTCO_chipsets {
+ TCO_ICH = 0, /* ICH */
+ TCO_ICH0, /* ICH0 */
+ TCO_ICH2, /* ICH2 */
+ TCO_ICH2M, /* ICH2-M */
+ TCO_ICH3, /* ICH3-S */
+ TCO_ICH3M, /* ICH3-M */
+ TCO_ICH4, /* ICH4 */
+ TCO_ICH4M, /* ICH4-M */
+ TCO_CICH, /* C-ICH */
+ TCO_ICH5, /* ICH5 & ICH5R */
+ TCO_6300ESB, /* 6300ESB */
+ TCO_ICH6, /* ICH6 & ICH6R */
+ TCO_ICH6M, /* ICH6-M */
+ TCO_ICH6W, /* ICH6W & ICH6RW */
+ TCO_631XESB, /* 631xESB/632xESB */
+ TCO_ICH7, /* ICH7 & ICH7R */
+ TCO_ICH7DH, /* ICH7DH */
+ TCO_ICH7M, /* ICH7-M & ICH7-U */
+ TCO_ICH7MDH, /* ICH7-M DH */
+ TCO_ICH8, /* ICH8 & ICH8R */
+ TCO_ICH8DH, /* ICH8DH */
+ TCO_ICH8DO, /* ICH8DO */
+ TCO_ICH8M, /* ICH8M */
+ TCO_ICH8ME, /* ICH8M-E */
+ TCO_ICH9, /* ICH9 */
+ TCO_ICH9R, /* ICH9R */
+ TCO_ICH9DH, /* ICH9DH */
+ TCO_ICH9DO, /* ICH9DO */
+ TCO_ICH9M, /* ICH9M */
+ TCO_ICH9ME, /* ICH9M-E */
+ TCO_ICH10, /* ICH10 */
+ TCO_ICH10R, /* ICH10R */
+ TCO_ICH10D, /* ICH10D */
+ TCO_ICH10DO, /* ICH10DO */
+};
+
+static struct {
+ char *name;
+ unsigned int iTCO_version;
+} iTCO_chipset_info[] __devinitdata = {
+ {"ICH", 1},
+ {"ICH0", 1},
+ {"ICH2", 1},
+ {"ICH2-M", 1},
+ {"ICH3-S", 1},
+ {"ICH3-M", 1},
+ {"ICH4", 1},
+ {"ICH4-M", 1},
+ {"C-ICH", 1},
+ {"ICH5 or ICH5R", 1},
+ {"6300ESB", 1},
+ {"ICH6 or ICH6R", 2},
+ {"ICH6-M", 2},
+ {"ICH6W or ICH6RW", 2},
+ {"631xESB/632xESB", 2},
+ {"ICH7 or ICH7R", 2},
+ {"ICH7DH", 2},
+ {"ICH7-M or ICH7-U", 2},
+ {"ICH7-M DH", 2},
+ {"ICH8 or ICH8R", 2},
+ {"ICH8DH", 2},
+ {"ICH8DO", 2},
+ {"ICH8M", 2},
+ {"ICH8M-E", 2},
+ {"ICH9", 2},
+ {"ICH9R", 2},
+ {"ICH9DH", 2},
+ {"ICH9DO", 2},
+ {"ICH9M", 2},
+ {"ICH9M-E", 2},
+ {"ICH10", 2},
+ {"ICH10R", 2},
+ {"ICH10D", 2},
+ {"ICH10DO", 2},
+ {NULL, 0}
+};
+
+#define ITCO_PCI_DEVICE(dev, data) \
+ .vendor = PCI_VENDOR_ID_INTEL, \
+ .device = dev, \
+ .subvendor = PCI_ANY_ID, \
+ .subdevice = PCI_ANY_ID, \
+ .class = 0, \
+ .class_mask = 0, \
+ .driver_data = data
+
+/*
+ * This data only exists for exporting the supported PCI ids
+ * via MODULE_DEVICE_TABLE. We do not actually register a
+ * pci_driver, because the I/O Controller Hub has also other
+ * functions that probably will be registered by other drivers.
+ */
+static struct pci_device_id iTCO_wdt_pci_tbl[] = {
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801AA_0, TCO_ICH)},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801AB_0, TCO_ICH0)},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801BA_0, TCO_ICH2)},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801BA_10, TCO_ICH2M)},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801CA_0, TCO_ICH3)},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801CA_12, TCO_ICH3M)},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801DB_0, TCO_ICH4)},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801DB_12, TCO_ICH4M)},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801E_0, TCO_CICH)},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_82801EB_0, TCO_ICH5)},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ESB_1, TCO_6300ESB)},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_0, TCO_ICH6)},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_1, TCO_ICH6M)},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH6_2, TCO_ICH6W)},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ESB2_0, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x2671, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x2672, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x2673, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x2674, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x2675, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x2676, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x2677, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x2678, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x2679, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x267a, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x267b, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x267c, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x267d, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x267e, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(0x267f, TCO_631XESB)},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_0, TCO_ICH7)},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_30, TCO_ICH7DH)},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_1, TCO_ICH7M)},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH7_31, TCO_ICH7MDH)},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_0, TCO_ICH8)},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_2, TCO_ICH8DH)},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_3, TCO_ICH8DO)},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_4, TCO_ICH8M)},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH8_1, TCO_ICH8ME)},
+ { ITCO_PCI_DEVICE(0x2918, TCO_ICH9)},
+ { ITCO_PCI_DEVICE(0x2916, TCO_ICH9R)},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_2, TCO_ICH9DH)},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_4, TCO_ICH9DO)},
+ { ITCO_PCI_DEVICE(0x2919, TCO_ICH9M)},
+ { ITCO_PCI_DEVICE(0x2917, TCO_ICH9ME)},
+ { ITCO_PCI_DEVICE(0x3a18, TCO_ICH10)},
+ { ITCO_PCI_DEVICE(0x3a16, TCO_ICH10R)},
+ { ITCO_PCI_DEVICE(0x3a1a, TCO_ICH10D)},
+ { ITCO_PCI_DEVICE(0x3a14, TCO_ICH10DO)},
+ { 0, }, /* End of list */
+};
+MODULE_DEVICE_TABLE(pci, iTCO_wdt_pci_tbl);
+
+/* Address definitions for the TCO */
+/* TCO base address */
+#define TCOBASE iTCO_wdt_private.ACPIBASE + 0x60
+/* SMI Control and Enable Register */
+#define SMI_EN iTCO_wdt_private.ACPIBASE + 0x30
+
+#define TCO_RLD TCOBASE + 0x00 /* TCO Timer Reload and Curr.
Value */
+#define TCOv1_TMR TCOBASE + 0x01 /* TCOv1 Timer Initial Value */
+#define TCO_DAT_IN TCOBASE + 0x02 /* TCO Data In Register */
+#define TCO_DAT_OUT TCOBASE + 0x03 /* TCO Data Out Register */
+#define TCO1_STS TCOBASE + 0x04 /* TCO1 Status Register */
+#define TCO2_STS TCOBASE + 0x06 /* TCO2 Status Register */
+#define TCO1_CNT TCOBASE + 0x08 /* TCO1 Control Register */
+#define TCO2_CNT TCOBASE + 0x0a /* TCO2 Control Register */
+#define TCOv2_TMR TCOBASE + 0x12 /* TCOv2 Timer Initial Value */
+
+/* internal variables */
+static unsigned long is_active;
+static char expect_release;
+static struct { /* this is private data for the iTCO_wdt device
*/
+ /* TCO version/generation */
+ unsigned int iTCO_version;
+ /* The cards ACPIBASE address (TCOBASE = ACPIBASE+0x60) */
+ unsigned long ACPIBASE;
+ /* NO_REBOOT flag is Memory-Mapped GCS register bit 5 (TCO version 2)*/
+ unsigned long __iomem *gcs;
+ /* the lock for io operations */
+ spinlock_t io_lock;
+ /* the PCI-device */
+ struct pci_dev *pdev;
+} iTCO_wdt_private;
+
+/* the watchdog platform device */
+static struct platform_device *iTCO_wdt_platform_device;
+
+/* module parameters */
+#define WATCHDOG_HEARTBEAT 30 /* 30 sec default heartbeat */
+static int heartbeat = WATCHDOG_HEARTBEAT; /* in seconds */
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (2<heartbeat<39
(TCO v1) or 613 (TCO v2), default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout,
+ "Watchdog cannot be stopped once started (default="
+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+/*
+ * Some TCO specific functions
+ */
+
+static inline unsigned int seconds_to_ticks(int seconds)
+{
+ /* the internal timer is stored as ticks which decrement
+ * every 0.6 seconds */
+ return (seconds * 10) / 6;
+}
+
+static void iTCO_wdt_set_NO_REBOOT_bit(void)
+{
+ u32 val32;
+
+ /* Set the NO_REBOOT bit: this disables reboots */
+ if (iTCO_wdt_private.iTCO_version == 2) {
+ val32 = readl(iTCO_wdt_private.gcs);
+ val32 |= 0x00000020;
+ writel(val32, iTCO_wdt_private.gcs);
+ } else if (iTCO_wdt_private.iTCO_version == 1) {
+ pci_read_config_dword(iTCO_wdt_private.pdev, 0xd4, &val32);
+ val32 |= 0x00000002;
+ pci_write_config_dword(iTCO_wdt_private.pdev, 0xd4, val32);
+ }
+}
+
+static int iTCO_wdt_unset_NO_REBOOT_bit(void)
+{
+ int ret = 0;
+ u32 val32;
+
+ /* Unset the NO_REBOOT bit: this enables reboots */
+ if (iTCO_wdt_private.iTCO_version == 2) {
+ val32 = readl(iTCO_wdt_private.gcs);
+ val32 &= 0xffffffdf;
+ writel(val32, iTCO_wdt_private.gcs);
+
+ val32 = readl(iTCO_wdt_private.gcs);
+ if (val32 & 0x00000020)
+ ret = -EIO;
+ } else if (iTCO_wdt_private.iTCO_version == 1) {
+ pci_read_config_dword(iTCO_wdt_private.pdev, 0xd4, &val32);
+ val32 &= 0xfffffffd;
+ pci_write_config_dword(iTCO_wdt_private.pdev, 0xd4, val32);
+
+ pci_read_config_dword(iTCO_wdt_private.pdev, 0xd4, &val32);
+ if (val32 & 0x00000002)
+ ret = -EIO;
+ }
+
+ return ret; /* returns: 0 = OK, -EIO = Error */
+}
+
+static int iTCO_wdt_start(void)
+{
+ unsigned int val;
+
+ spin_lock(&iTCO_wdt_private.io_lock);
+
+ iTCO_vendor_pre_start(iTCO_wdt_private.ACPIBASE, heartbeat);
+
+ /* disable chipset's NO_REBOOT bit */
+ if (iTCO_wdt_unset_NO_REBOOT_bit()) {
+ spin_unlock(&iTCO_wdt_private.io_lock);
+ printk(KERN_ERR PFX "failed to reset NO_REBOOT flag, reboot
disabled by hardware\n");
+ return -EIO;
+ }
+
+ /* Force the timer to its reload value by writing to the TCO_RLD
+ register */
+ if (iTCO_wdt_private.iTCO_version == 2)
+ outw(0x01, TCO_RLD);
+ else if (iTCO_wdt_private.iTCO_version == 1)
+ outb(0x01, TCO_RLD);
+
+ /* Bit 11: TCO Timer Halt -> 0 = The TCO timer is enabled to count */
+ val = inw(TCO1_CNT);
+ val &= 0xf7ff;
+ outw(val, TCO1_CNT);
+ val = inw(TCO1_CNT);
+ spin_unlock(&iTCO_wdt_private.io_lock);
+
+ if (val & 0x0800)
+ return -1;
+ return 0;
+}
+
+static int iTCO_wdt_stop(void)
+{
+ unsigned int val;
+
+ spin_lock(&iTCO_wdt_private.io_lock);
+
+ iTCO_vendor_pre_stop(iTCO_wdt_private.ACPIBASE);
+
+ /* Bit 11: TCO Timer Halt -> 1 = The TCO timer is disabled */
+ val = inw(TCO1_CNT);
+ val |= 0x0800;
+ outw(val, TCO1_CNT);
+ val = inw(TCO1_CNT);
+
+ /* Set the NO_REBOOT bit to prevent later reboots, just for sure */
+ iTCO_wdt_set_NO_REBOOT_bit();
+
+ spin_unlock(&iTCO_wdt_private.io_lock);
+
+ if ((val & 0x0800) == 0)
+ return -1;
+ return 0;
+}
+
+static int iTCO_wdt_keepalive(void)
+{
+ spin_lock(&iTCO_wdt_private.io_lock);
+
+ iTCO_vendor_pre_keepalive(iTCO_wdt_private.ACPIBASE, heartbeat);
+
+ /* Reload the timer by writing to the TCO Timer Counter register */
+ if (iTCO_wdt_private.iTCO_version == 2)
+ outw(0x01, TCO_RLD);
+ else if (iTCO_wdt_private.iTCO_version == 1)
+ outb(0x01, TCO_RLD);
+
+ spin_unlock(&iTCO_wdt_private.io_lock);
+ return 0;
+}
+
+static int iTCO_wdt_set_heartbeat(int t)
+{
+ unsigned int val16;
+ unsigned char val8;
+ unsigned int tmrval;
+
+ tmrval = seconds_to_ticks(t);
+ /* from the specs: */
+ /* "Values of 0h-3h are ignored and should not be attempted" */
+ if (tmrval < 0x04)
+ return -EINVAL;
+ if (((iTCO_wdt_private.iTCO_version == 2) && (tmrval > 0x3ff)) ||
+ ((iTCO_wdt_private.iTCO_version == 1) && (tmrval > 0x03f)))
+ return -EINVAL;
+
+ iTCO_vendor_pre_set_heartbeat(tmrval);
+
+ /* Write new heartbeat to watchdog */
+ if (iTCO_wdt_private.iTCO_version == 2) {
+ spin_lock(&iTCO_wdt_private.io_lock);
+ val16 = inw(TCOv2_TMR);
+ val16 &= 0xfc00;
+ val16 |= tmrval;
+ outw(val16, TCOv2_TMR);
+ val16 = inw(TCOv2_TMR);
+ spin_unlock(&iTCO_wdt_private.io_lock);
+
+ if ((val16 & 0x3ff) != tmrval)
+ return -EINVAL;
+ } else if (iTCO_wdt_private.iTCO_version == 1) {
+ spin_lock(&iTCO_wdt_private.io_lock);
+ val8 = inb(TCOv1_TMR);
+ val8 &= 0xc0;
+ val8 |= (tmrval & 0xff);
+ outb(val8, TCOv1_TMR);
+ val8 = inb(TCOv1_TMR);
+ spin_unlock(&iTCO_wdt_private.io_lock);
+
+ if ((val8 & 0x3f) != tmrval)
+ return -EINVAL;
+ }
+
+ heartbeat = t;
+ return 0;
+}
+
+static int iTCO_wdt_get_timeleft(int *time_left)
+{
+ unsigned int val16;
+ unsigned char val8;
+
+ /* read the TCO Timer */
+ if (iTCO_wdt_private.iTCO_version == 2) {
+ spin_lock(&iTCO_wdt_private.io_lock);
+ val16 = inw(TCO_RLD);
+ val16 &= 0x3ff;
+ spin_unlock(&iTCO_wdt_private.io_lock);
+
+ *time_left = (val16 * 6) / 10;
+ } else if (iTCO_wdt_private.iTCO_version == 1) {
+ spin_lock(&iTCO_wdt_private.io_lock);
+ val8 = inb(TCO_RLD);
+ val8 &= 0x3f;
+ spin_unlock(&iTCO_wdt_private.io_lock);
+
+ *time_left = (val8 * 6) / 10;
+ } else
+ return -EINVAL;
+ return 0;
+}
+
+/*
+ * /dev/watchdog handling
+ */
+
+static int iTCO_wdt_open(struct inode *inode, struct file *file)
+{
+ /* /dev/watchdog can only be opened once */
+ if (test_and_set_bit(0, &is_active))
+ return -EBUSY;
+
+ /*
+ * Reload and activate timer
+ */
+ iTCO_wdt_start();
+ return nonseekable_open(inode, file);
+}
+
+static int iTCO_wdt_release(struct inode *inode, struct file *file)
+{
+ /*
+ * Shut off the timer.
+ */
+ if (expect_release == 42) {
+ iTCO_wdt_stop();
+ } else {
+ printk(KERN_CRIT PFX
+ "Unexpected close, not stopping watchdog!\n");
+ iTCO_wdt_keepalive();
+ }
+ clear_bit(0, &is_active);
+ expect_release = 0;
+ return 0;
+}
+
+static ssize_t iTCO_wdt_write(struct file *file, const char __user *data,
+ size_t len, loff_t *ppos)
+{
+ /* See if we got the magic character 'V' and reload the timer */
+ if (len) {
+ if (!nowayout) {
+ size_t i;
+
+ /* note: just in case someone wrote the magic
+ character five months ago... */
+ expect_release = 0;
+
+ /* scan to see whether or not we got the
+ magic character */
+ for (i = 0; i != len; i++) {
+ char c;
+ if (get_user(c, data + i))
+ return -EFAULT;
+ if (c == 'V')
+ expect_release = 42;
+ }
+ }
+
+ /* someone wrote to us, we should reload the timer */
+ iTCO_wdt_keepalive();
+ }
+ return len;
+}
+
+static long iTCO_wdt_ioctl(struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ int new_options, retval = -EINVAL;
+ int new_heartbeat;
+ void __user *argp = (void __user *)arg;
+ int __user *p = argp;
+ static struct watchdog_info ident = {
+ .options = WDIOF_SETTIMEOUT |
+ WDIOF_KEEPALIVEPING |
+ WDIOF_MAGICCLOSE,
+ .firmware_version = 0,
+ .identity = DRV_NAME,
+ };
+
+ switch (cmd) {
+ case WDIOC_GETSUPPORT:
+ return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
+ case WDIOC_GETSTATUS:
+ case WDIOC_GETBOOTSTATUS:
+ return put_user(0, p);
+
+ case WDIOC_SETOPTIONS:
+ {
+ if (get_user(new_options, p))
+ return -EFAULT;
+
+ if (new_options & WDIOS_DISABLECARD) {
+ iTCO_wdt_stop();
+ retval = 0;
+ }
+ if (new_options & WDIOS_ENABLECARD) {
+ iTCO_wdt_keepalive();
+ iTCO_wdt_start();
+ retval = 0;
+ }
+ return retval;
+ }
+ case WDIOC_KEEPALIVE:
+ iTCO_wdt_keepalive();
+ return 0;
+
+ case WDIOC_SETTIMEOUT:
+ {
+ if (get_user(new_heartbeat, p))
+ return -EFAULT;
+ if (iTCO_wdt_set_heartbeat(new_heartbeat))
+ return -EINVAL;
+ iTCO_wdt_keepalive();
+ /* Fall */
+ }
+ case WDIOC_GETTIMEOUT:
+ return put_user(heartbeat, p);
+ case WDIOC_GETTIMELEFT:
+ {
+ int time_left;
+ if (iTCO_wdt_get_timeleft(&time_left))
+ return -EINVAL;
+ return put_user(time_left, p);
+ }
+ default:
+ return -ENOTTY;
+ }
+}
+
+/*
+ * Kernel Interfaces
+ */
+
+static const struct file_operations iTCO_wdt_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .write = iTCO_wdt_write,
+ .unlocked_ioctl = iTCO_wdt_ioctl,
+ .open = iTCO_wdt_open,
+ .release = iTCO_wdt_release,
+};
+
+static struct miscdevice iTCO_wdt_miscdev = {
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &iTCO_wdt_fops,
+};
+
+/*
+ * Init & exit routines
+ */
+
+static int __devinit iTCO_wdt_init(struct pci_dev *pdev,
+ const struct pci_device_id *ent, struct platform_device *dev)
+{
+ int ret;
+ u32 base_address;
+ unsigned long RCBA;
+ unsigned long val32;
+
+ /*
+ * Find the ACPI/PM base I/O address which is the base
+ * for the TCO registers (TCOBASE=ACPIBASE + 0x60)
+ * ACPIBASE is bits [15:7] from 0x40-0x43
+ */
+ pci_read_config_dword(pdev, 0x40, &base_address);
+ base_address &= 0x0000ff80;
+ if (base_address == 0x00000000) {
+ /* Something's wrong here, ACPIBASE has to be set */
+ printk(KERN_ERR PFX "failed to get TCOBASE address\n");
+ pci_dev_put(pdev);
+ return -ENODEV;
+ }
+ iTCO_wdt_private.iTCO_version =
+ iTCO_chipset_info[ent->driver_data].iTCO_version;
+ iTCO_wdt_private.ACPIBASE = base_address;
+ iTCO_wdt_private.pdev = pdev;
+
+ /* Get the Memory-Mapped GCS register, we need it for the
+ NO_REBOOT flag (TCO v2). To get access to it you have to
+ read RCBA from PCI Config space 0xf0 and use it as base.
+ GCS = RCBA + ICH6_GCS(0x3410). */
+ if (iTCO_wdt_private.iTCO_version == 2) {
+ pci_read_config_dword(pdev, 0xf0, &base_address);
+ RCBA = base_address & 0xffffc000;
+ iTCO_wdt_private.gcs = ioremap((RCBA + 0x3410), 4);
+ }
+
+ /* Check chipset's NO_REBOOT bit */
+ if (iTCO_wdt_unset_NO_REBOOT_bit() && iTCO_vendor_check_noreboot_on()) {
+ printk(KERN_ERR PFX "failed to reset NO_REBOOT flag, reboot
disabled by hardware\n");
+ ret = -ENODEV; /* Cannot reset NO_REBOOT bit */
+ goto out;
+ }
+
+ /* Set the NO_REBOOT bit to prevent later reboots, just for sure */
+ iTCO_wdt_set_NO_REBOOT_bit();
+
+ /* The TCO logic uses the TCO_EN bit in the SMI_EN register */
+ if (!request_region(SMI_EN, 4, "iTCO_wdt")) {
+ printk(KERN_ERR PFX
+ "I/O address 0x%04lx already in use\n", SMI_EN);
+ ret = -EIO;
+ goto out;
+ }
+ /* Bit 13: TCO_EN -> 0 = Disables TCO logic generating an SMI# */
+ val32 = inl(SMI_EN);
+ val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */
+ outl(val32, SMI_EN);
+
+ /* The TCO I/O registers reside in a 32-byte range pointed to
+ by the TCOBASE value */
+ if (!request_region(TCOBASE, 0x20, "iTCO_wdt")) {
+ printk(KERN_ERR PFX "I/O address 0x%04lx already in use\n",
+ TCOBASE);
+ ret = -EIO;
+ goto unreg_smi_en;
+ }
+
+ printk(KERN_INFO PFX
+ "Found a %s TCO device (Version=%d, TCOBASE=0x%04lx)\n",
+ iTCO_chipset_info[ent->driver_data].name,
+ iTCO_chipset_info[ent->driver_data].iTCO_version,
+ TCOBASE);
+
+ /* Clear out the (probably old) status */
+ outb(8, TCO1_STS); /* Clear the Time Out Status bit */
+ outb(2, TCO2_STS); /* Clear SECOND_TO_STS bit */
+ outb(4, TCO2_STS); /* Clear BOOT_STS bit */
+
+ /* Make sure the watchdog is not running */
+ iTCO_wdt_stop();
+
+ /* Check that the heartbeat value is within it's range;
+ if not reset to the default */
+ if (iTCO_wdt_set_heartbeat(heartbeat)) {
+ iTCO_wdt_set_heartbeat(WATCHDOG_HEARTBEAT);
+ printk(KERN_INFO PFX "heartbeat value must be 2 < heartbeat <
39 (TCO v1) or 613 (TCO v2), using %d\n",
+ heartbeat);
+ }
+
+ ret = misc_register(&iTCO_wdt_miscdev);
+ if (ret != 0) {
+ printk(KERN_ERR PFX
+ "cannot register miscdev on minor=%d (err=%d)\n",
+ WATCHDOG_MINOR, ret);
+ goto unreg_region;
+ }
+
+ printk(KERN_INFO PFX "initialized. heartbeat=%d sec (nowayout=%d)\n",
+ heartbeat, nowayout);
+
+ return 0;
+
+unreg_region:
+ release_region(TCOBASE, 0x20);
+unreg_smi_en:
+ release_region(SMI_EN, 4);
+out:
+ if (iTCO_wdt_private.iTCO_version == 2)
+ iounmap(iTCO_wdt_private.gcs);
+ pci_dev_put(iTCO_wdt_private.pdev);
+ iTCO_wdt_private.ACPIBASE = 0;
+ return ret;
+}
+
+static void __devexit iTCO_wdt_cleanup(void)
+{
+ /* Stop the timer before we leave */
+ if (!nowayout)
+ iTCO_wdt_stop();
+
+ /* Deregister */
+ misc_deregister(&iTCO_wdt_miscdev);
+ release_region(TCOBASE, 0x20);
+ release_region(SMI_EN, 4);
+ if (iTCO_wdt_private.iTCO_version == 2)
+ iounmap(iTCO_wdt_private.gcs);
+ pci_dev_put(iTCO_wdt_private.pdev);
+ iTCO_wdt_private.ACPIBASE = 0;
+}
+
+static int __devinit iTCO_wdt_probe(struct platform_device *dev)
+{
+ int found = 0;
+ struct pci_dev *pdev = NULL;
+ const struct pci_device_id *ent;
+
+ spin_lock_init(&iTCO_wdt_private.io_lock);
+
+ for_each_pci_dev(pdev) {
+ ent = pci_match_id(iTCO_wdt_pci_tbl, pdev);
+ if (ent) {
+ if (!(iTCO_wdt_init(pdev, ent, dev))) {
+ found++;
+ break;
+ }
+ }
+ }
+
+ if (!found) {
+ printk(KERN_INFO PFX "No card detected\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int __devexit iTCO_wdt_remove(struct platform_device *dev)
+{
+ if (iTCO_wdt_private.ACPIBASE)
+ iTCO_wdt_cleanup();
+
+ return 0;
+}
+
+static void iTCO_wdt_shutdown(struct platform_device *dev)
+{
+ iTCO_wdt_stop();
+}
+
+#define iTCO_wdt_suspend NULL
+#define iTCO_wdt_resume NULL
+
+static struct platform_driver iTCO_wdt_driver = {
+ .probe = iTCO_wdt_probe,
+ .remove = __devexit_p(iTCO_wdt_remove),
+ .shutdown = iTCO_wdt_shutdown,
+ .suspend = iTCO_wdt_suspend,
+ .resume = iTCO_wdt_resume,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DRV_NAME,
+ },
+};
+
+static int __init iTCO_wdt_init_module(void)
+{
+ int err;
+
+ printk(KERN_INFO PFX "Intel TCO WatchDog Timer Driver v%s\n",
+ DRV_VERSION);
+
+ err = platform_driver_register(&iTCO_wdt_driver);
+ if (err)
+ return err;
+
+ iTCO_wdt_platform_device = platform_device_register_simple(DRV_NAME,
+ -1, NULL, 0);
+ if (IS_ERR(iTCO_wdt_platform_device)) {
+ err = PTR_ERR(iTCO_wdt_platform_device);
+ goto unreg_platform_driver;
+ }
+
+ return 0;
+
+unreg_platform_driver:
+ platform_driver_unregister(&iTCO_wdt_driver);
+ return err;
+}
+
+static void __exit iTCO_wdt_cleanup_module(void)
+{
+ platform_device_unregister(iTCO_wdt_platform_device);
+ platform_driver_unregister(&iTCO_wdt_driver);
+ printk(KERN_INFO PFX "Watchdog Module Unloaded.\n");
+}
+
+module_init(iTCO_wdt_init_module);
+module_exit(iTCO_wdt_cleanup_module);
+
+MODULE_AUTHOR("Wim Van Sebroeck <wim@xxxxxxxxx>");
+MODULE_DESCRIPTION("Intel TCO WatchDog Timer Driver");
+MODULE_VERSION(DRV_VERSION);
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff -r 1db1bb63824b -r 0ee2f293ec4c drivers/char/watchdog/i8xx_tco.c
--- a/drivers/char/watchdog/i8xx_tco.c Mon Nov 23 07:32:47 2009 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,566 +0,0 @@
-/*
- * i8xx_tco: TCO timer driver for i8xx chipsets
- *
- * (c) Copyright 2000 kernel concepts <nils@xxxxxxxxxxxxxxxxx>, All Rights
Reserved.
- * http://www.kernelconcepts.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * Neither kernel concepts nor Nils Faerber admit liability nor provide
- * warranty for any of this software. This material is provided
- * "AS-IS" and at no charge.
- *
- * (c) Copyright 2000 kernel concepts <nils@xxxxxxxxxxxxxxxxx>
- * developed for
- * Jentro AG, Haar/Munich (Germany)
- *
- * TCO timer driver for i8xx chipsets
- * based on softdog.c by Alan Cox <alan@xxxxxxxxxx>
- *
- * The TCO timer is implemented in the following I/O controller hubs:
- * (See the intel documentation on http://developer.intel.com.)
- * 82801AA (ICH) : document number 290655-003, 290677-014,
- * 82801AB (ICHO) : document number 290655-003, 290677-014,
- * 82801BA (ICH2) : document number 290687-002, 298242-027,
- * 82801BAM (ICH2-M) : document number 290687-002, 298242-027,
- * 82801CA (ICH3-S) : document number 290733-003, 290739-013,
- * 82801CAM (ICH3-M) : document number 290716-001, 290718-007,
- * 82801DB (ICH4) : document number 290744-001, 290745-020,
- * 82801DBM (ICH4-M) : document number 252337-001, 252663-005,
- * 82801E (C-ICH) : document number 273599-001, 273645-002,
- * 82801EB (ICH5) : document number 252516-001, 252517-003,
- * 82801ER (ICH5R) : document number 252516-001, 252517-003,
- *
- * 20000710 Nils Faerber
- * Initial Version 0.01
- * 20000728 Nils Faerber
- * 0.02 Fix for SMI_EN->TCO_EN bit, some cleanups
- * 20011214 Matt Domsch <Matt_Domsch@xxxxxxxx>
- * 0.03 Added nowayout module option to override CONFIG_WATCHDOG_NOWAYOUT
- * Didn't add timeout option as i810_margin already exists.
- * 20020224 Joel Becker, Wim Van Sebroeck
- * 0.04 Support for 82801CA(M) chipset, timer margin needs to be > 3,
- * add support for WDIOC_SETTIMEOUT and WDIOC_GETTIMEOUT.
- * 20020412 Rob Radez <rob@xxxxxxxxxxxxxx>, Wim Van Sebroeck
- * 0.05 Fix possible timer_alive race, add expect close support,
- * clean up ioctls (WDIOC_GETSTATUS, WDIOC_GETBOOTSTATUS and
- * WDIOC_SETOPTIONS), made i810tco_getdevice __init,
- * removed boot_status, removed tco_timer_read,
- * added support for 82801DB and 82801E chipset,
- * added support for 82801EB and 8280ER chipset,
- * general cleanup.
- * 20030921 Wim Van Sebroeck <wim@xxxxxxxxx>
- * 0.06 change i810_margin to heartbeat, use module_param,
- * added notify system support, renamed module to i8xx_tco.
- * 20050128 Wim Van Sebroeck <wim@xxxxxxxxx>
- * 0.07 Added support for the ICH4-M, ICH6, ICH6R, ICH6-M, ICH6W and ICH6RW
- * chipsets. Also added support for the "undocumented" ICH7 chipset.
- * 20050807 Wim Van Sebroeck <wim@xxxxxxxxx>
- * 0.08 Make sure that the watchdog is only "armed" when started.
- * (Kernel Bug 4251)
- * 20060416 Wim Van Sebroeck <wim@xxxxxxxxx>
- * 0.09 Remove support for the ICH6, ICH6R, ICH6-M, ICH6W and ICH6RW and
- * ICH7 chipsets. (See Kernel Bug 6031 - other code will support these
- * chipsets)
- */
-
-/*
- * Includes, defines, variables, module parameters, ...
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/types.h>
-#include <linux/miscdevice.h>
-#include <linux/watchdog.h>
-#include <linux/notifier.h>
-#include <linux/reboot.h>
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
-
-#include "i8xx_tco.h"
-
-/* Module and version information */
-#define TCO_VERSION "0.09"
-#define TCO_MODULE_NAME "i8xx TCO timer"
-#define TCO_DRIVER_NAME TCO_MODULE_NAME ", v" TCO_VERSION
-#define PFX TCO_MODULE_NAME ": "
-
-/* internal variables */
-static unsigned int ACPIBASE;
-static spinlock_t tco_lock; /* Guards the hardware */
-static unsigned long timer_alive;
-static char tco_expect_close;
-static struct pci_dev *i8xx_tco_pci;
-
-/* module parameters */
-#define WATCHDOG_HEARTBEAT 30 /* 30 sec default heartbeat (2<heartbeat<39) */
-static int heartbeat = WATCHDOG_HEARTBEAT; /* in seconds */
-module_param(heartbeat, int, 0);
-MODULE_PARM_DESC(heartbeat, "Watchdog heartbeat in seconds. (2<heartbeat<39,
default=" __MODULE_STRING(WATCHDOG_HEARTBEAT) ")");
-
-static int nowayout = WATCHDOG_NOWAYOUT;
-module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started
(default=CONFIG_WATCHDOG_NOWAYOUT)");
-
-/*
- * Some TCO specific functions
- */
-
-static inline unsigned char seconds_to_ticks(int seconds)
-{
- /* the internal timer is stored as ticks which decrement
- * every 0.6 seconds */
- return (seconds * 10) / 6;
-}
-
-static int tco_timer_start (void)
-{
- unsigned char val;
-
- spin_lock(&tco_lock);
-
- /* disable chipset's NO_REBOOT bit */
- pci_read_config_byte (i8xx_tco_pci, 0xd4, &val);
- val &= 0xfd;
- pci_write_config_byte (i8xx_tco_pci, 0xd4, val);
-
- /* Bit 11: TCO Timer Halt -> 0 = The TCO timer is enabled to count */
- val = inb (TCO1_CNT + 1);
- val &= 0xf7;
- outb (val, TCO1_CNT + 1);
- val = inb (TCO1_CNT + 1);
-
- spin_unlock(&tco_lock);
-
- if (val & 0x08)
- return -1;
- return 0;
-}
-
-static int tco_timer_stop (void)
-{
- unsigned char val, val1;
-
- spin_lock(&tco_lock);
- /* Bit 11: TCO Timer Halt -> 1 = The TCO timer is disabled */
- val = inb (TCO1_CNT + 1);
- val |= 0x08;
- outb (val, TCO1_CNT + 1);
- val = inb (TCO1_CNT + 1);
-
- /* Set the NO_REBOOT bit to prevent later reboots, just for sure */
- pci_read_config_byte (i8xx_tco_pci, 0xd4, &val1);
- val1 |= 0x02;
- pci_write_config_byte (i8xx_tco_pci, 0xd4, val1);
-
- spin_unlock(&tco_lock);
-
- if ((val & 0x08) == 0)
- return -1;
- return 0;
-}
-
-static int tco_timer_keepalive (void)
-{
- spin_lock(&tco_lock);
- /* Reload the timer by writing to the TCO Timer Reload register */
- outb (0x01, TCO1_RLD);
- spin_unlock(&tco_lock);
- return 0;
-}
-
-static int tco_timer_set_heartbeat (int t)
-{
- unsigned char val;
- unsigned char tmrval;
-
- tmrval = seconds_to_ticks(t);
- /* from the specs: */
- /* "Values of 0h-3h are ignored and should not be attempted" */
- if (tmrval > 0x3f || tmrval < 0x04)
- return -EINVAL;
-
- /* Write new heartbeat to watchdog */
- spin_lock(&tco_lock);
- val = inb (TCO1_TMR);
- val &= 0xc0;
- val |= tmrval;
- outb (val, TCO1_TMR);
- val = inb (TCO1_TMR);
- spin_unlock(&tco_lock);
-
- if ((val & 0x3f) != tmrval)
- return -EINVAL;
-
- heartbeat = t;
- return 0;
-}
-
-static int tco_timer_get_timeleft (int *time_left)
-{
- unsigned char val;
-
- spin_lock(&tco_lock);
-
- /* read the TCO Timer */
- val = inb (TCO1_RLD);
- val &= 0x3f;
-
- spin_unlock(&tco_lock);
-
- *time_left = (int)((val * 6) / 10);
-
- return 0;
-}
-
-/*
- * /dev/watchdog handling
- */
-
-static int i8xx_tco_open (struct inode *inode, struct file *file)
-{
- /* /dev/watchdog can only be opened once */
- if (test_and_set_bit(0, &timer_alive))
- return -EBUSY;
-
- /*
- * Reload and activate timer
- */
- tco_timer_keepalive ();
- tco_timer_start ();
- return nonseekable_open(inode, file);
-}
-
-static int i8xx_tco_release (struct inode *inode, struct file *file)
-{
- /*
- * Shut off the timer.
- */
- if (tco_expect_close == 42) {
- tco_timer_stop ();
- } else {
- printk(KERN_CRIT PFX "Unexpected close, not stopping
watchdog!\n");
- tco_timer_keepalive ();
- }
- clear_bit(0, &timer_alive);
- tco_expect_close = 0;
- return 0;
-}
-
-static ssize_t i8xx_tco_write (struct file *file, const char __user *data,
- size_t len, loff_t * ppos)
-{
- /* See if we got the magic character 'V' and reload the timer */
- if (len) {
- if (!nowayout) {
- size_t i;
-
- /* note: just in case someone wrote the magic character
- * five months ago... */
- tco_expect_close = 0;
-
- /* scan to see whether or not we got the magic
character */
- for (i = 0; i != len; i++) {
- char c;
- if(get_user(c, data+i))
- return -EFAULT;
- if (c == 'V')
- tco_expect_close = 42;
- }
- }
-
- /* someone wrote to us, we should reload the timer */
- tco_timer_keepalive ();
- }
- return len;
-}
-
-static int i8xx_tco_ioctl (struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- int new_options, retval = -EINVAL;
- int new_heartbeat;
- int time_left;
- void __user *argp = (void __user *)arg;
- int __user *p = argp;
- static struct watchdog_info ident = {
- .options = WDIOF_SETTIMEOUT |
- WDIOF_KEEPALIVEPING |
- WDIOF_MAGICCLOSE,
- .firmware_version = 0,
- .identity = TCO_MODULE_NAME,
- };
-
- switch (cmd) {
- case WDIOC_GETSUPPORT:
- return copy_to_user(argp, &ident,
- sizeof (ident)) ? -EFAULT : 0;
-
- case WDIOC_GETSTATUS:
- case WDIOC_GETBOOTSTATUS:
- return put_user (0, p);
-
- case WDIOC_KEEPALIVE:
- tco_timer_keepalive ();
- return 0;
-
- case WDIOC_SETOPTIONS:
- {
- if (get_user (new_options, p))
- return -EFAULT;
-
- if (new_options & WDIOS_DISABLECARD) {
- tco_timer_stop ();
- retval = 0;
- }
-
- if (new_options & WDIOS_ENABLECARD) {
- tco_timer_keepalive ();
- tco_timer_start ();
- retval = 0;
- }
-
- return retval;
- }
-
- case WDIOC_SETTIMEOUT:
- {
- if (get_user(new_heartbeat, p))
- return -EFAULT;
-
- if (tco_timer_set_heartbeat(new_heartbeat))
- return -EINVAL;
-
- tco_timer_keepalive ();
- /* Fall */
- }
-
- case WDIOC_GETTIMEOUT:
- return put_user(heartbeat, p);
-
- case WDIOC_GETTIMELEFT:
- {
- if (tco_timer_get_timeleft(&time_left))
- return -EINVAL;
-
- return put_user(time_left, p);
- }
-
- default:
- return -ENOIOCTLCMD;
- }
-}
-
-/*
- * Notify system
- */
-
-static int i8xx_tco_notify_sys (struct notifier_block *this, unsigned long
code, void *unused)
-{
- if (code==SYS_DOWN || code==SYS_HALT) {
- /* Turn the WDT off */
- tco_timer_stop ();
- }
-
- return NOTIFY_DONE;
-}
-
-/*
- * Kernel Interfaces
- */
-
-static const struct file_operations i8xx_tco_fops = {
- .owner = THIS_MODULE,
- .llseek = no_llseek,
- .write = i8xx_tco_write,
- .ioctl = i8xx_tco_ioctl,
- .open = i8xx_tco_open,
- .release = i8xx_tco_release,
-};
-
-static struct miscdevice i8xx_tco_miscdev = {
- .minor = WATCHDOG_MINOR,
- .name = "watchdog",
- .fops = &i8xx_tco_fops,
-};
-
-static struct notifier_block i8xx_tco_notifier = {
- .notifier_call = i8xx_tco_notify_sys,
-};
-
-/*
- * Data for PCI driver interface
- *
- * This data only exists for exporting the supported
- * PCI ids via MODULE_DEVICE_TABLE. We do not actually
- * register a pci_driver, because someone else might one day
- * want to register another driver on the same PCI id.
- */
-static struct pci_device_id i8xx_tco_pci_tbl[] = {
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, PCI_ANY_ID,
PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_0, PCI_ANY_ID,
PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0, PCI_ANY_ID,
PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_10, PCI_ANY_ID,
PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0, PCI_ANY_ID,
PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12, PCI_ANY_ID,
PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0, PCI_ANY_ID,
PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12, PCI_ANY_ID,
PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801E_0, PCI_ANY_ID,
PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0, PCI_ANY_ID,
PCI_ANY_ID, },
- { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1, PCI_ANY_ID,
PCI_ANY_ID, },
- { 0, }, /* End of list */
-};
-MODULE_DEVICE_TABLE (pci, i8xx_tco_pci_tbl);
-
-/*
- * Init & exit routines
- */
-
-static unsigned char __init i8xx_tco_getdevice (void)
-{
- struct pci_dev *dev = NULL;
- u8 val1, val2;
- u16 badr;
- /*
- * Find the PCI device
- */
-
- while ((dev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
- if (pci_match_id(i8xx_tco_pci_tbl, dev)) {
- i8xx_tco_pci = dev;
- break;
- }
- }
-
- if (i8xx_tco_pci) {
- /*
- * Find the ACPI base I/O address which is the base
- * for the TCO registers (TCOBASE=ACPIBASE + 0x60)
- * ACPIBASE is bits [15:7] from 0x40-0x43
- */
- pci_read_config_byte (i8xx_tco_pci, 0x40, &val1);
- pci_read_config_byte (i8xx_tco_pci, 0x41, &val2);
- badr = ((val2 << 1) | (val1 >> 7)) << 7;
- ACPIBASE = badr;
- /* Something's wrong here, ACPIBASE has to be set */
- if (badr == 0x0001 || badr == 0x0000) {
- printk (KERN_ERR PFX "failed to get TCOBASE address\n");
- return 0;
- }
-
- /* Check chipset's NO_REBOOT bit */
- pci_read_config_byte (i8xx_tco_pci, 0xd4, &val1);
- if (val1 & 0x02) {
- val1 &= 0xfd;
- pci_write_config_byte (i8xx_tco_pci, 0xd4, val1);
- pci_read_config_byte (i8xx_tco_pci, 0xd4, &val1);
- if (val1 & 0x02) {
- printk (KERN_ERR PFX "failed to reset NO_REBOOT
flag, reboot disabled by hardware\n");
- return 0; /* Cannot reset NO_REBOOT bit */
- }
- }
- /* Disable reboots untill the watchdog starts */
- val1 |= 0x02;
- pci_write_config_byte (i8xx_tco_pci, 0xd4, val1);
-
- /* Set the TCO_EN bit in SMI_EN register */
- if (!request_region (SMI_EN + 1, 1, "i8xx TCO")) {
- printk (KERN_ERR PFX "I/O address 0x%04x already in
use\n",
- SMI_EN + 1);
- return 0;
- }
- val1 = inb (SMI_EN + 1);
- val1 &= 0xdf;
- outb (val1, SMI_EN + 1);
- release_region (SMI_EN + 1, 1);
- return 1;
- }
- return 0;
-}
-
-static int __init watchdog_init (void)
-{
- int ret;
-
- spin_lock_init(&tco_lock);
-
- /* Check whether or not the hardware watchdog is there */
- if (!i8xx_tco_getdevice () || i8xx_tco_pci == NULL)
- return -ENODEV;
-
- if (!request_region (TCOBASE, 0x10, "i8xx TCO")) {
- printk (KERN_ERR PFX "I/O address 0x%04x already in use\n",
- TCOBASE);
- ret = -EIO;
- goto out;
- }
-
- /* Clear out the (probably old) status */
- outb (0, TCO1_STS);
- outb (3, TCO2_STS);
-
- /* Check that the heartbeat value is within it's range ; if not reset
to the default */
- if (tco_timer_set_heartbeat (heartbeat)) {
- heartbeat = WATCHDOG_HEARTBEAT;
- tco_timer_set_heartbeat (heartbeat);
- printk(KERN_INFO PFX "heartbeat value must be 2<heartbeat<39,
using %d\n",
- heartbeat);
- }
-
- ret = register_reboot_notifier(&i8xx_tco_notifier);
- if (ret != 0) {
- printk(KERN_ERR PFX "cannot register reboot notifier
(err=%d)\n",
- ret);
- goto unreg_region;
- }
-
- ret = misc_register(&i8xx_tco_miscdev);
- if (ret != 0) {
- printk(KERN_ERR PFX "cannot register miscdev on minor=%d
(err=%d)\n",
- WATCHDOG_MINOR, ret);
- goto unreg_notifier;
- }
-
- tco_timer_stop ();
-
- printk (KERN_INFO PFX "initialized (0x%04x). heartbeat=%d sec
(nowayout=%d)\n",
- TCOBASE, heartbeat, nowayout);
-
- return 0;
-
-unreg_notifier:
- unregister_reboot_notifier(&i8xx_tco_notifier);
-unreg_region:
- release_region (TCOBASE, 0x10);
-out:
- return ret;
-}
-
-static void __exit watchdog_cleanup (void)
-{
- /* Stop the timer before we leave */
- if (!nowayout)
- tco_timer_stop ();
-
- /* Deregister */
- misc_deregister (&i8xx_tco_miscdev);
- unregister_reboot_notifier(&i8xx_tco_notifier);
- release_region (TCOBASE, 0x10);
-}
-
-module_init(watchdog_init);
-module_exit(watchdog_cleanup);
-
-MODULE_AUTHOR("Nils Faerber");
-MODULE_DESCRIPTION("TCO timer driver for i8xx chipsets");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff -r 1db1bb63824b -r 0ee2f293ec4c drivers/char/watchdog/i8xx_tco.h
--- a/drivers/char/watchdog/i8xx_tco.h Mon Nov 23 07:32:47 2009 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,42 +0,0 @@
-/*
- * i8xx_tco: TCO timer driver for i8xx chipsets
- *
- * (c) Copyright 2000 kernel concepts <nils@xxxxxxxxxxxxxxxxx>, All Rights
Reserved.
- * http://www.kernelconcepts.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * Neither kernel concepts nor Nils Faerber admit liability nor provide
- * warranty for any of this software. This material is provided
- * "AS-IS" and at no charge.
- *
- * (c) Copyright 2000 kernel concepts <nils@xxxxxxxxxxxxxxxxx>
- * developed for
- * Jentro AG, Haar/Munich (Germany)
- *
- * TCO timer driver for i8xx chipsets
- * based on softdog.c by Alan Cox <alan@xxxxxxxxxx>
- *
- * For history and the complete list of supported I/O Controller Hub's
- * see i8xx_tco.c
- */
-
-
-/*
- * Some address definitions for the TCO
- */
-
-#define TCOBASE ACPIBASE + 0x60 /* TCO base address
*/
-#define TCO1_RLD TCOBASE + 0x00 /* TCO Timer Reload and Current Value */
-#define TCO1_TMR TCOBASE + 0x01 /* TCO Timer Initial Value */
-#define TCO1_DAT_IN TCOBASE + 0x02 /* TCO Data In Register
*/
-#define TCO1_DAT_OUT TCOBASE + 0x03 /* TCO Data Out Register
*/
-#define TCO1_STS TCOBASE + 0x04 /* TCO1 Status Register
*/
-#define TCO2_STS TCOBASE + 0x06 /* TCO2 Status Register
*/
-#define TCO1_CNT TCOBASE + 0x08 /* TCO1 Control Register */
-#define TCO2_CNT TCOBASE + 0x0a /* TCO2 Control Register */
-
-#define SMI_EN ACPIBASE + 0x30 /* SMI Control and Enable
Register */
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |