[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] Xen: cannot start HVM with VIF



Sorry for not beeing clear earlier:
"Finally" i meant, i finally solved it.
I got myself the tun/tap module and it worked.

Thanks for the reply though.
Version of Xen Hypervisor ?

Boris.

--- On Sun, 11/22/09, Killian De Volder <killian.de.volder@xxxxxxxxxx> wrote:

From: Killian De Volder <killian.de.volder@xxxxxxxxxx>
Subject: Re: [Xen-devel] Xen: cannot start HVM with VIF
To: "xen-devel@xxxxxxxxxxxxxxxxxxx" <xen-devel@xxxxxxxxxxxxxxxxxxx>
Date: Sunday, November 22, 2009, 2:35 AM

Finally, just found a usefull error output: tun/tap not compiled in
kernel or module.
> I can't figure this one out:
>
> 1 memory = 1024
> 2 name = "w"
> 3 vcpus = 2
> 4 vif = [ 'type=ioemu,bridge=lan' ]
> 5 disk = [
> 6 |····'tap:aio:/dev/vg/win,hda,w',
> 7 |····'tap:aio:/dev/vg/swap,hdb,w'
> 9 ]
> 10 usbdevice='tablet'
> 11 kernel = "/usr/lib64/xen/boot/hvmloader"
> 12 builder='hvm'
> 13 boot="dc"
> 14 vnc='1'
> 15 vncpassword=''
> 16 vnclisten='192.168.123.2'
> 17 sdl='0'
> 18 #
> 19 keymap='nl-be'
> 20
> 21 localtime=1
>
> If i remove line 4 it boots just fine, if i keep it:
>
> xm create w7
> Using config file "./w7".
> Error: Domain 'w7' does not exist.
>
> If i preserve it, (and start it pauzed so create.py doesn't kill it);
> xm list shows it is crashed.
>
> Any suggestions ? i'm clueless right about now.
>
> Thank you,
> Killian De Volder
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel
>


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

<
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.