|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] [xen-3.5][linux-pvops-2.6.31.6] Xen BUG at hpet.c:663 triggered by changeset #20430
It seems this bug is triggered by changeset #20430, although it doesn't seem to change hpet.c, so the actual problem will probably be elsewhere. #20429 is booting and working fine for me (at least it doesn't give this bug). changesets #20430 up until tip not, i can trigger this bug every time by compiling xen (make xen), this makes it panic and reboot. -- Sander Friday, November 20, 2009, 12:03:59 PM, you wrote: > Hi All, > When booting, the system spontaneus reboots some but not all the times > Serial console output appended. > -- > Sander > System: intel Q9400, asus p5q-em do (intel Q45 chipset), 2GB ram > __ __ _____ ____ _ _ _ > \ \/ /___ _ __ |___ / | ___| _ _ _ __ ___| |_ __ _| |__ | | ___ > \ // _ \ '_ \ |_ \ |___ \ __| | | | '_ \/ __| __/ _` | '_ \| |/ _ \ > / \ __/ | | | ___) | ___) |__| |_| | | | \__ \ || (_| | |_) | | __/ > /_/\_\___|_| |_| |____(_)____/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___| > > (XEN) Xen version 3.5-unstable (root@) (gcc version 4.3.2 (Debian 4.3.2-1.1) > ) T > hu Nov 19 08:37:49 CET 2009 > (XEN) Latest ChangeSet: Sat Nov 14 10:32:59 2009 +0000 20453:bec27eb6f72c > (XEN) Command line: loglvl=all loglvl_guest=all dom0_mem=512M com1=115200,8n1 > co > nsole=com1 > (XEN) Video information: > (XEN) VGA is text mode 80x25, font 8x16 > (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds > (XEN) EDID info not retrieved because of reasons unknown > (XEN) Disc information: > (XEN) Found 1 MBR signatures > (XEN) Found 1 EDD information structures > (XEN) Xen-e820 RAM map: > (XEN) 0000000000000000 - 000000000009fc00 (usable) > (XEN) 000000000009fc00 - 00000000000a0000 (reserved) > (XEN) 00000000000e4000 - 0000000000100000 (reserved) > (XEN) 0000000000100000 - 000000007ee70000 (usable) > (XEN) 000000007ee70000 - 000000007ee7e000 (ACPI data) > (XEN) 000000007ee7e000 - 000000007eed0000 (ACPI NVS) > (XEN) 000000007eed0000 - 000000007ef00000 (reserved) > (XEN) 00000000fed00000 - 00000000fed01100 (reserved) > (XEN) 00000000fed02000 - 00000000fed14c00 (reserved) > (XEN) 00000000fed20000 - 00000000fed40000 (reserved) > (XEN) 00000000fee00000 - 00000000fee01000 (reserved) > (XEN) 00000000ffe00000 - 0000000100000000 (reserved) > (XEN) System RAM: 2000MB (2048816kB) > (XEN) ACPI: RSDP 000FB080, 0024 (r2 ACPIAM) > (XEN) ACPI: XSDT 7EE70100, 0064 (r1 A_M_I_ OEMXSDT 5000927 MSFT 97) > (XEN) ACPI: FACP 7EE70290, 00F4 (r3 A_M_I_ OEMFACP 5000927 MSFT 97) > (XEN) ACPI: DSDT 7EE70440, 841F (r1 A1065 A1065000 0 INTL 20060113) > (XEN) ACPI: FACS 7EE7E000, 0040 > (XEN) ACPI: APIC 7EE70390, 006C (r1 A_M_I_ OEMAPIC 5000927 MSFT 97) > (XEN) ACPI: MCFG 7EE70400, 003C (r1 A_M_I_ OEMMCFG 5000927 MSFT 97) > (XEN) ACPI: OEMB 7EE7E040, 0089 (r1 A_M_I_ AMI_OEM 5000927 MSFT 97) > (XEN) ACPI: HPET 7EE78860, 0038 (r1 A_M_I_ OEMHPET 5000927 MSFT 97) > (XEN) ACPI: GSCI 7EE7E0D0, 2024 (r1 A_M_I_ GMCHSCI 5000927 MSFT 97) > (XEN) ACPI: DMAR 7EE80100, 0070 (r1 AMI OEMDMAR 1 MSFT 97) > (XEN) ACPI: SSDT 7EE810E0, 0A7C (r1 DpgPmm CpuPm 12 INTL 20060113) > (XEN) NUMA turned off > (XEN) Faking a node at 0000000000000000-000000007ee70000 > (XEN) Domain heap initialised > (XEN) found SMP MP-table at 000ff780 > (XEN) DMI present. > (XEN) Using APIC driver default > (XEN) ACPI: PM-Timer IO Port: 0x808 > (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0] > (XEN) ACPI: wakeup_vec[7ee7e00c], vec_size[20] > (XEN) ACPI: Local APIC address 0xfee00000 > (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > (XEN) Processor #0 7:7 APIC version 20 > (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > (XEN) Processor #1 7:7 APIC version 20 > (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) > (XEN) Processor #2 7:7 APIC version 20 > (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) > (XEN) Processor #3 7:7 APIC version 20 > (XEN) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) > (XEN) IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > (XEN) ACPI: IRQ0 used by override. > (XEN) ACPI: IRQ2 used by override. > (XEN) ACPI: IRQ9 used by override. > (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs > (XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000 > (XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 > (XEN) PCI: Not using MMCONFIG. > (XEN) Using ACPI (MADT) for SMP configuration information > (XEN) Using scheduler: SMP Credit Scheduler (credit) > (XEN) Initializing CPU#0 > (XEN) Detected 2666.415 MHz processor. > (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K > (XEN) CPU: L2 cache: 3072K > (XEN) CPU: Physical Processor ID: 0 > (XEN) CPU: Processor Core ID: 0 > (XEN) VMX: Supported advanced features: > (XEN) - APIC MMIO access virtualisation > (XEN) - APIC TPR shadow > (XEN) - Virtual NMI > (XEN) - MSR direct-access bitmap > (XEN) HVM: VMX enabled > (XEN) xsave_init: cpu0: cntxt_max_size: 0x240 and states: 00000000:00000003 > (XEN) xsave_init: using cntxt_size: 0x240 and states: 00000000:00000003 > (XEN) Intel machine check reporting enabled on CPU#0. > (XEN) CPU0: Thermal monitoring enabled (TM2) > (XEN) CMCI: CPU0 has no CMCI support > (XEN) I/O virtualisation disabled > (XEN) CPU0: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a > (XEN) Booting processor 1/1 eip 8c000 > (XEN) Initializing CPU#1 > (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K > (XEN) CPU: L2 cache: 3072K > (XEN) CPU: Physical Processor ID: 0 > (XEN) CPU: Processor Core ID: 1 > (XEN) xsave_init: cpu1: cntxt_max_size: 0x240 and states: 00000000:00000003 > (XEN) Intel machine check reporting enabled on CPU#1. > (XEN) CPU1: Thermal monitoring enabled (TM2) > (XEN) CMCI: CPU1 has no CMCI support > (XEN) CPU1: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a > (XEN) Booting processor 2/2 eip 8c000 > (XEN) Initializing CPU#2 > (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K > (XEN) CPU: L2 cache: 3072K > (XEN) CPU: Physical Processor ID: 0 > (XEN) CPU: Processor Core ID: 2 > (XEN) xsave_init: cpu2: cntxt_max_size:0x240 and states: 00000000:00000003 > (XEN) Intel machine check reporting enabled on CPU#2. > (XEN) CPU2: Thermal monitoring enabled (TM2) > (XEN) CMCI: CPU2 has no CMCI support > (XEN) CPU2: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a > (XEN) Booting processor 3/3 eip 8c000 > (XEN) Initializing CPU#3 > (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K > (XEN) CPU: L2 cache: 3072K > (XEN) CPU: Physical Processor ID: 0 > (XEN) CPU: Processor Core ID: 3 > (XEN) xsave_init: cpu3: cntxt_max_size: 0x240 and states: 00000000:00000003 > (XEN) Intel machine check reporting enabled on CPU#3. > (XEN) CPU3: Thermal monitoring enabled (TM2) > (XEN) CMCI: CPU3 has no CMCI support > (XEN) CPU3: Intl(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a > (XEN) Total of 4 processors activated. > (XEN) ENABLING IO-APIC IRQs (XEN) ->> Using new ACK method > (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 > (XEN) checking TSC synchronization across 4 CPUs: passed. > (XEN) Platform timer is 14.318MHz HPET > (XEN) microcode.c:73:d32767 microcode: CPU1 resumed > (XEN) microcode.c:73:d32767 microcode: CPU2 resumed > (XEN) Brought up 4 CPUs > (XEN) microcode.c:73:d32767 microcode: CPU3 resumed > (XEN) HPET: 8 timers in total, 8 timers will be used for broadcast > (XEN) ACPI sleep modes: S3 > (XEN) mcheck_poll: Machine check polling timer started. > (XEN) *** LOADING DOMAIN 0 *** > (XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x821000 > (XEN) elf_parse_binary: phdr: paddr=0x1821000 memsz=0xe57f8 > (XEN) elf_parse_binary: phdr: paddr=0x1907000 memsz=0x888 > (XEN) elf_parse_binary: phdr: paddr=0x1908000 memsz=0x15860 > (XEN) elf_parse_binary: phdr: paddr=0x191d860 memsz=0x1a57a0 > (XEN) elf_parse_binary: memory: 0x1000000 -> 0x1ac3000 > (XEN) elf_xen_parse_note: GUEST_OS = "linux" > (XEN) elf_xen_parse_note: GUEST_VERSION = "2.6" > (XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0" > (XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000 > (XEN) elf_xen_parse_note: ENTRY = 0xffffffff8191da60 > (XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81009000 > (XEN) elf_xen_parse_note: FEATURES = > "!writable_page_tables|pae_pgdir_above_4gb" > (XEN) elf_xen_parse_note: PAE_MODE = "yes" > (XEN) elf_xen_parse_note: LOADER = "generic" > (XEN) elf_xen_parse_note: unknown xen elf note (0xd) > (XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1 > (XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000 > (XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0 > (XEN) elf_xen_addr_calc_check: addresses: > (XEN) virt_base = 0xffffffff80000000 > (XEN) elf_paddr_offset = 0x0 > (XEN) virt_offset = 0xffffffff80000000 > (XEN) virt_kstart = 0xffffffff81000000 > (XEN) virt_kend = 0xffffffff81ac3000 > (XEN) virt_entry = 0xffffffff8191da60 > (XEN) p2m_base = 0xffffffffffffffff > (XEN) Xen kernel: 64-bit, lsb, compat32 > (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1ac3000 > (XEN) PHYSICAL MEMORY ARRANGEMENT: > (XEN) Dom0 alloc.: 0000000074000000->0000000078000000 (114688 pages to be > all > ocated) > (XEN) VIRTUAL MEMORY ARRANGEMENT: > (XEN) Loaded kernel: ffffffff81000000->ffffffff81ac3000 > (XEN) Init. ramdisk: ffffffff81ac3000->ffffffff82172a00 > (XEN) Phys-Mach map: ffffffff82173000->ffffffff82273000 > (XEN) Start info: ffffffff82273000->ffffffff822734b4 > (XEN) Page tables: ffffffff82274000->ffffffff82289000 > (XEN) Boot stack: ffffffff82289000->ffffffff8228a000 > (XEN) TOTAL: ffffffff80000000->ffffffff82400000 > (XEN) ENTRY ADDRESS: ffffffff8191da60 > (XEN) Dom0 has maximum 4 VCPUs > (XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff81821000 > (XEN) elf_load_binary: phdr 1 at 0xffffffff81821000 -> 0xffffffff819067f8 > (XEN) elf_load_binary: phdr 2 at 0xffffffff81907000 -> 0xffffffff81907888 > (XEN) elf_load_binary: phdr 3 at 0xffffffff81908000 -> 0xffffffff8191d860 > (XEN) elf_load_binary: phdr 4 at 0xffffffff8191d860 -> 0xffffffff81998000 > (XEN) Scrubbing Free RAM: ..............done. > (XEN) Xen trace buffers: disabled > (XEN) Std. Loglevel: All > (XEN) Guest Loglevel: All > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to > Xen > ) > (XEN) Freed 156kB init memory. > mapping kernel into physical memory > Xen: setup ISA identity maps > about to get started... > (XEN) io_apic.c:2251: > (XEN) ioapic_guest_write: apic=0, pin=0, irq=0 > (XEN) ioapic_guest_write: new_entry=00010900 > (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! > (XEN) io_apic.c:2251: > (XEN) ioapic_guest_write: apic=0, pin=2, irq=0 > (XEN) ioapic_guest_write: new_entry=00010900 > (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! > (XEN) irq.c:1444: dom0: pirq 0 or irq 3 already mapped > (XEN) io_apic.c:2251: > (XEN) ioapic_guest_write: apic=0, pin=4, irq=4 > (XEN) ioapic_guest_write: new_entry=00010900 > (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! > (XEN) irq.c:1444: dom0: pirq 0 or irq 5 already mapped > (XEN) irq.c:1444: dom0: pirq 0 or irq 6 already mapped > (XEN) irq.c:1444: dom0: pirq 0 or irq 7 already mapped > (XEN) irq.c:1444: dom0: pirq 0 or irq 8 already mapped > (XEN) irq.c:1444: dom0: pirq 0 or irq 9 already mapped > (XEN) irq.c:1444: dom0: pirq 0 or irq 10 already mapped > (XEN) irq.c:1444: dom0: pirq 0 or irq 11 already mapped > (XEN) irq.c:1444: dom0: pirq 0 or irq 12 already mapped > (XEN) irq.c:1444: dom0: pirq 0 or irq 13 already mapped > (XEN) irq.c:1444: dom0: pirq 0 or irq 14 already mapped > (XEN) irq.c:1444: dom0: pirq 0 or irq 15 already mapped > (XEN) allocated vector for irq:16 > (XEN) irq.c:1444: dom0: pirq 0 or irq 16 already mapped > (XEN) allocated vector for irq:17 > (XEN) irq.c:1444: dom0: pirq 0 or irq 17 already mapped > (XEN) allocated vector for irq:18 > (XEN) irq.c:1444: dom0: pirq 0 or irq 18 already mapped > (XEN) allocated vector for irq:19 > (XEN) irq.c:1444: dom0: pirq 0 or irq 19 already mapped > (XEN) allocated vector for irq:20 > (XEN) irq.c:1444: dom0: pirq 0 or irq 20 already mapped > (XEN) allocated vector for irq:22 > (XEN) irq.c:1444: dom0: pirq 0 or irq 22 already mapped > (XEN) allocated vector for irq:23 > (XEN) irq.c:1444: dom0: pirq 0 or irq 23 already mapped > (XEN) io_apic.c:2251: > (XEN) ioapic_guest_write: apic=0, pin=0, irq=0 > (XEN) ioapic_guest_write: new_entry=00000900 > (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! > (XEN) io_apic.c:2251: > (XEN) ioapic_guest_write: apic=0, pin=4, irq=4 > (XEN) ioapic_guest_write: new_entry=00000904 > (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! > (XEN) PCI add device 00:00.0 > (XEN) PCI add device 00:01.0 > (XEN) PCI add device 00:03.0 > (XEN) PCI add device 00:19.0 > (XEN) PCI add device 00:1e.0 > (XEN) PCI add device 00:1f.0 > (XEN) PCI add device 00:1f.2 > (XEN) PCI add device 00:1f.3 > (XEN) PCI add device 00:1f.5 > (XEN) PCI add device 01:00.0 > (XEN) PCI add device 01:00.1 > (XEN) io_apic.c:2251: > (XEN) ioapic_guest_write: apic=0, pin=4, irq=4 > (XEN) ioapic_guest_write: new_entry=00000904 > (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! > (XEN) Set CPU acpi_id(1) cpuid(0) Px State info: > (XEN) _PPC: 0 > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=22220] > (XEN) Monitor-Mwait will be used to enter C-1 state > (XEN) Set CPU acpi_id(1) cpuid(0) Px State info: > (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, > bit_offset=0 > , reserved=0, address=0 > (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, > bit_offset=0 > , reserved=0, address=0 > (XEN) _PSS: state_count=3 > (XEN) State0: 2670MHz 89000mW 10us 10us 0x81f 0x81f > (XEN) State1: 2336MHz 76000mW 10us 10us 0x71b 0x71b > (XEN) State2: 2003MHz 63000mW 10us 10us 0x616 0x616 > (XEN) _PSD: num_entries=5 rev=0 domain=0 coord_type=254 num_processors=4 > (XEN) _PPC: 0 > (XEN) xen_pminfo: @acpi_cpufreq_cpu_init,HARDWARE addr space > (XEN) CPU 0 initialization completed > (XEN) Set CPU acpi_id(2) cpuid(1) Px State info: > (XEN) _PPC: 0 > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=22220] > (XEN) Monitor-Mwait will be used to enter C-1 state > (XEN) Set CPU acpi_id(2) cpuid(1) Px State info: > (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, > bit_offset=0 > , reserved=0, address=0 > (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, > bit_offset=0 > , reserved=0, address=0 > (XEN) _PSS: state_count=3 > (XEN) State0: 2670MHz 89000mW 10us 10us 0x81f 0x81f > (XEN) State1: 2336MHz 76000mW 10us 10us 0x71b 0x71b > (XEN) State2: 2003MHz 63000mW 10us 10us 0x616 0x616 > (XEN) _PSD: num_entries=5 rev=0 domain=0 coord_type=254 num_processors=4 > (XEN) _PPC: 0 > (XEN) xen_pminfo: @acpi_cpufreq_cpu_init,HARDWARE addr space > (XEN) CPU 1 initialization completed > (XEN) Set CPU acpi_id(3) cpuid(2) Px State info: > (XEN) _PPC: 0 > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=22220] > (XEN) Monitor-Mwait will be used to enter C-1 state > (XEN) Set CPU acpi_id(3) cpuid(2) Px State info: > (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, > bit_offset=0 > , reserved=0, address=0 > (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, > bit_offset=0 > , reserved=0, address=0 > (XEN) _PSS: state_count=3 > (XEN) State0: 2670MHz 89000mW 10us 10us 0x81f 0x81f > (XEN) State1: 2336MHz 76000mW 10us 10us 0x71b 0x71b > (XEN) State2: 2003MHz 63000mW 10us 10us 0x616 0x616 > (XEN) _PSD: num_entries=5 rev=0 domain=0 coord_type=254 num_processors=4 > (XEN) _PPC: 0 > (XEN) xen_pminfo: @acpi_cpufreq_cpu_init,HARDWARE addr space > (XEN) CPU 2 initialization completed > (XEN) Set CPU acpi_id(4) cpuid(3) Px State info: > (XEN) _PPC: 0 > (XEN) cpuid.MWAIT[.eax=40, .ebx=40, .ecx=3, .edx=22220] > (XEN) Monitor-Mwait will be used to enter C-1 state > (XEN) Set CPU acpi_id(4) cpuid(3) Px State info: > (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, > bit_offset=0 > , reserved=0, address=0 > (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, > bit_offset=0 > , reserved=0, address=0 > (XEN) _PSS: state_count=3 > (XEN) State0: 2670MHz 89000mW 10us 10us 0x81f 0x81f > (XEN) State1: 2336MHz 76000mW 10us 10us 0x71b 0x71b > (XEN) State2: 2003MHz 63000mW 10us 10us 0x616 0x616 > (XEN) _PSD: num_entries=5 rev=0 domain=0 coord_type=254 num_processors=4 > (XEN) _PPC: 0 > (XEN) xen_pminfo: @acpi_cpufreq_cpu_init,HARDWARE addr space > (XEN) CPU 3 initialization completed > (XEN) Xen BUG at hpet.c:663 > (XEN) ----[ Xen-3.5-unstable x86_64 debug=y Not tainted ]---- > (XEN) CPU: 3 > (XEN) RIP: e008:[<ffff82c480189b81>] hpet_broadcast_exit+0x4b/0xf2 > (XEN) RFLAGS: 0000000000010246 CONTEXT: hypervisor > (XEN) rax: ffff82c48025fa88 rbx: 0000000000000000 rcx: 0000000000000010 > (XEN) rdx: 0000000000006000 rsi: 000000054583d5f5 rdi: ffff82c4802306b0 > (XEN) rbp: ffff83007ea37e30 rsp: ffff83007ea37e10 r8: 0000000000000004 > (XEN) r9: ffff83007ea68e68 r10: ffff83007ea68e68 r11: 0f0f0f0f0f0f0f0f > (XEN) r12: 0000000000000003 r13: 0000000000006000 r14: ffff830076401830 > (XEN) r15: 0000000000916ce8 cr0: 000000008005003b cr4: 00000000000026f0 > (XEN) cr3: 000000007ecec000 cr2: 000000000046e320 > (XEN) ds: 002b es: 002b fs: 0000 gs: 0000 ss: e010 cs: e008 > (XEN) Xen stack trace from rsp=ffff83007ea37e10: > (XEN) 0000000000000002 ffff82c4802362a0 ffff8300764018c0 ffff830076401830 > (XEN) ffff83007ea37ee0 ffff82c48018bbf1 ffff83007ea37ea0 ffff82c48011fd9e > (XEN) ffff82c480265080 00916ce37ea37ed8 ffff82c48011cb6f ffff82c480265100 > (XEN) ffff83007ea2e380 0000000000000003 ffff82c4802362a0 000000007ea37f28 > (XEN) 0000000000000000 0000000000000000 ffff83007ea37ee0 fffff83000000046 > (XEN) 0000000000000003 ffff83007ea37f28 ffff82c4802362a0 ffff83007ea37f28 > (XEN) ffff82c48025fa00 ffff82c480236918 ffff83007ea37f20 ffff82c48014ca00 > (XEN) ffff83007cefa000 ffff83007ea3e000 0000000000000003 ffff83007cefa000 > (XEN) 00000002314e8a32 ffff82c480265080 ffff83007ea37dc8 0000000000000000 > (XEN) 0000000000000000 0000000000000000 0000000000000000 ffff88001f89bf10 > (XEN) ffffffff818fe0a8 0000000000000246 000000000000000c ffff88001f89be30 > (XEN) 0000000000000000 0000000000000000 ffffffff810093aa 0000000000000000 > (XEN) 00000000deadbeef 00000000deadbeef 0000010000000000 ffffffff810093aa > (XEN) 000000000000e033 0000000000000246 ffff88001f89bef8 000000000000e02b > (XEN) 5555555555555555 5555555555555555 5555555555555555 5555555555555555 > (XEN) 5555555500000003 ffff83007ea3e000 > (XEN) Xen call trace: > (XEN) [<ffff82c480189b81>] hpet_broadcast_exit+0x4b/0xf2 > (XEN) [<ffff82c48018bbf1>] acpi_processor_idle+0x5f6/0x6b5 > (XEN) [<ffff82c48014ca00>] idle_loop+0x89/0x93 > (XEN) > (XEN) > (XEN) **************************************** > (XEN) Panic on CPU 3: > (XEN) Xen BUG at hpet.c:663 > (XEN) **************************************** > (XEN) > (XEN) Reboot in five seconds... > host : xentest > release : 2.6.31.6 > version : #1 SMP Fri Nov 20 02:18:08 CET 2009 > machine : x86_64 > nr_cpus : 4 > nr_nodes : 1 > cores_per_socket : 4 > threads_per_core : 1 > cpu_mhz : 2666 > hw_caps : > bfebfbff:20100800:00000000:00000940:0408e3fd:00000000:00000001:00000000 > virt_caps : hvm > total_memory : 2000 > free_memory : 1496 > node_to_cpu : node0:0-3 > node_to_memory : node0:1496 > node_to_dma32_mem : node0:1496 > xen_major : 3 > xen_minor : 5 > xen_extra : -unstable > xen_caps : xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32 > hvm-3.0-x86_32p hvm-3.0-x86_64 > xen_scheduler : credit > xen_pagesize : 4096 > platform_params : virt_start=0xffff800000000000 > xen_changeset : Sat Nov 14 10:32:59 2009 +0000 20453:bec27eb6f72c > xen_commandline : loglvl=all loglvl_guest=all dom0_mem=512M > com1=115200,8n1 console=com1 > cc_compiler : gcc version 4.3.2 (Debian 4.3.2-1.1) > cc_compile_by : root > cc_compile_domain : > cc_compile_date : Thu Nov 19 08:37:49 CET 2009 > xend_config_format : 4 -- Best regards, Sander mailto:linux@xxxxxxxxxxxxxx _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |