[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [XCP] RE: [Xen-devel] xen-api installation problem



Hi I made a fresh VM and run the new script and got a better result
though some errors exist as follows:

File "omake_gen_magic.ml", line 83, characters 14-33:
Error: Unbound value Lm_string_util.trim
make[5]: *** [omake_gen_magic.cmo] Error 2
make[5]: Leaving directory
`/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot'
make[4]: *** [boot] Error 2
make[4]: Leaving directory
`/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9'
make[3]: [/root/repo/xen-dist-ocaml.hg/obj/omake/.configured] Error 2
(ignored)

Tony

-----Original Message-----
From: Dave Scott [mailto:Dave.Scott@xxxxxxxxxxxxx] 
Sent: Tuesday, November 17, 2009 6:36 PM
To: Tony Wei; Vincent Hanquez
Cc: xen-devel@xxxxxxxxxxxxxxxxxxx; Roger Cruz; Mike Schwartz
Subject: RE: [XCP] RE: [Xen-devel] xen-api installation problem

Hi,

You're still missing 'aclocal' which I think is part of the 'automake'
package -- try installing that as well as 'autoconf'.

The updated build script
(http://xenbits.xen.org/xapi/build-xapi-toolstack.sh) should do this for
you. If you're still having trouble, try a re-clone of the VM plus a
fresh copy of the build script.

I think the other errors are harmless.

Cheers,
Dave

-----Original Message-----
From: Tony Wei [mailto:twei@xxxxxxxxxxxxxxxxxxxxxxxx] 
Sent: 17 November 2009 23:27
To: Dave Scott; Vincent Hanquez
Cc: xen-devel@xxxxxxxxxxxxxxxxxxx; Roger Cruz; Mike Schwartz
Subject: RE: [XCP] RE: [Xen-devel] xen-api installation problem

Hi, I gto autoconf package by following the way you showed below, and
run the script again. Unfortunately, I got the following new errors when
it starts to run autoreconf:

Building xapi-specific libraries
Can't exec "aclocal": No such file or directory at /usr/bin/autoreconf
line 174.
Use of uninitialized value in pattern match (m//) at /usr/bin/autoreconf
line 174.
Can't exec "aclocal": No such file or directory at
/usr/share/autoconf/Autom4te/FileUtils.pm line 288.
autoreconf: failed to run aclocal: No such file or directory

By the way, the previous errors still exist:

make[5]: Entering directory
`/root/repo/xen-dist-ocaml.hg/obj/findlib/findlib-1.1.2pl1/src/findlib'
Makefile:129: depend: No such file or directory

......

File "omake_gen_magic.ml", line 83, characters 14-33:
Error: Unbound value Lm_string_util.trim
make[5]: *** [omake_gen_magic.cmo] Error 2
make[5]: Leaving directory
`/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot'
make[4]: *** [boot] Error 2
make[4]: Leaving directory
`/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9'
make[3]: [/root/repo/xen-dist-ocaml.hg/obj/omake/.configured] Error 2
(ignored)
rm -f
/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot/Makefile.dep
make -C /root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot
Makefile.dep
make[4]: Entering directory
`/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot'
Makefile:909: Makefile.dep: No such file or directory



-----Original Message-----
From: Dave Scott [mailto:Dave.Scott@xxxxxxxxxxxxx] 
Sent: Tuesday, November 17, 2009 6:20 PM
To: Tony Wei; Vincent Hanquez
Cc: xen-devel@xxxxxxxxxxxxxxxxxxx; Roger Cruz
Subject: [XCP] RE: [Xen-devel] xen-api installation problem

Hi Tony,

(added '[XCP]' to subject)

It turns out there are two problems:
1. the missing 'sh autogen.sh; configure' that Vincent pointed out
(thanks!)
2. the fact that the autoconf and automake packages are missing in the
current build VM

I've added fixes/workarounds for both of these into the build script
 http://xenbits.xen.org/xapi/build-xapi-toolstack.sh

Could you re-clone a fresh build VM and try again?

Clearly we need to do a bit of work on our 'build system' :-)

Cheers,
Dave

-----Original Message-----
From: Tony Wei [mailto:twei@xxxxxxxxxxxxxxxxxxxxxxxx] 
Sent: 17 November 2009 16:51
To: Vincent Hanquez
Cc: xen-devel@xxxxxxxxxxxxxxxxxxx; Dave Scott; Roger Cruz
Subject: RE: [Xen-devel] xen-api installation problem

Hi Vincent,

I modified the script as you suggested and ran it in a brand-new
buildvm. It still failed and I got the following error messages (plus
the previous errors):

========================================================================
===================

make[5]: Entering directory
`/root/repo/xen-dist-ocaml.hg/obj/findlib/findlib-1.1.2pl1/src/findlib'
Makefile:129: depend: No such file or directory

......

File "omake_gen_magic.ml", line 83, characters 14-33:
Error: Unbound value Lm_string_util.trim
make[5]: *** [omake_gen_magic.cmo] Error 2
make[5]: Leaving directory
`/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot'
make[4]: *** [boot] Error 2
make[4]: Leaving directory
`/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9'
make[3]: [/root/repo/xen-dist-ocaml.hg/obj/omake/.configured] Error 2
(ignored)
rm -f
/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot/Makefile.dep
make -C /root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot
Makefile.dep
make[4]: Entering directory
`/root/repo/xen-dist-ocaml.hg/obj/omake/omake-0.9.6.9/boot'
Makefile:909: Makefile.dep: No such file or directory

.......

Building xapi-specific libraries
autogen.sh: line 2: autoreconf: command not found

========================================================================
===================

By the way, instead of installing a host with a pre-built xapi
toolstack, I used an XenServer 5.0.0 to host buildvm, is it OK?

Your early assistance is highly appreciated!

Tony


-----Original Message-----
From: Vincent Hanquez [mailto:vincent.hanquez@xxxxxxxxxxxxx] 
Sent: Monday, November 16, 2009 1:07 PM
To: Tony Wei
Cc: xen-devel@xxxxxxxxxxxxxxxxxxx; Dave Scott
Subject: Re: [Xen-devel] xen-api installation problem

Tony Wei wrote:
>
> Hi, I built xapi build appliance VM by following the instruction as:
>
>  
>
> http://xenbits.xen.org/xapi/install.html
>
>  
>
> Everything looks OK until I run:
>
>  
>
> # ./build-xapi-toolstack.sh
>
>  
>
> It stops at:
>
>  
>
> ...
>
> Building xapi-specific libraries
>
> Make: *** No rule to make target 'clean'. Stop.
>
>  
>
> Please advise. Thanks.
>
Not sure that will fix it but you can try adding just before the 
./rebuild step line 28 in the build-xapi-toolstack.sh script:

sh autogen.sh
./configure

the script should look like:

...
echo "Building xapi-specific libraries"
cd $REPO/xen-api-libs.hg
sh autogen.sh
./configure
./rebuild
echo "Building xapi toolstack"
...

-- 
Vincent Hanquez

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.