\ \/ /___ _ __ |___ /| || | |___ \ _ __ ___|___ \ _ __ _ __ ___ \ // _ \ '_ \ |_ \| || |_ __) |__| '__/ __| __) |__| '_ \| '__/ _ \ / \ __/ | | | ___) |__ _| / __/|__| | | (__ / __/|__| |_) | | | __/ /_/\_\___|_| |_| |____(_) |_|(_)_____| |_| \___|_____| | .__/|_| \___| |_| (XEN) Xen version 3.4.2-rc2-pre (hahn@xxxxxxxxxxx) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) Wed Oct 21 15:40:45 CEST 2009 (XEN) Latest ChangeSet: Tue Oct 20 21:44:08 2009 +0100 19791:df79861db125 (XEN) Console output is synchronous. (XEN) Command line: console=com1 com1=38400 msi=0 sync_console debug=yes guest_loglvl=all loglvl=all dom0_mem=3546M (XEN) Video information: (XEN) VGA is text mode 80x25, font 8x16 (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds (XEN) Disc information: (XEN) Found 6 MBR signatures (XEN) Found 6 EDD information structures (XEN) Xen-e820 RAM map: (XEN) 0000000000000000 - 000000000009cc00 (usable) (XEN) 000000000009cc00 - 00000000000a0000 (reserved) (XEN) 00000000000e4000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 00000000bf7c0000 (usable) (XEN) 00000000bf7c0000 - 00000000bf7cb000 (ACPI data) (XEN) 00000000bf7cb000 - 00000000bf7cc000 (ACPI NVS) (XEN) 00000000bf7cc000 - 00000000c0000000 (reserved) (XEN) 00000000e0000000 - 00000000f0000000 (reserved) (XEN) 00000000fec00000 - 00000000fed00000 (reserved) (XEN) 00000000fee00000 - 00000000fee01000 (reserved) (XEN) 00000000ffa80000 - 0000000100000000 (reserved) (XEN) 0000000100000000 - 0000000340000000 (usable) (XEN) System RAM: 12279MB (12574064kB) (XEN) ACPI: RSDP 000F80F0, 0024 (r2 PTLTD ) (XEN) ACPI: XSDT BF7C53B0, 00D4 (r1 PTLTD XSDT 60000 LTP 0) (XEN) ACPI: FACP BF7C9BE1, 00F4 (r3 FSC TYLERBRG 60000 PTL F4240) (XEN) ACPI: DSDT BF7C5484, 46D9 (r1 FSC D2619 60000 MSFT 3000001) (XEN) ACPI: FACS BF7CBFC0, 0040 (XEN) ACPI: TCPA BF7C9CD5, 0032 (r1 Phoeni x 60000 TL 0) (XEN) ACPI: SLIT BF7C9D07, 0030 (r1 FSC 60000 5A) (XEN) ACPI: EINJ BF7C9D37, 01B0 (r1 PTL WHEAPTL 60000 PTL 1) (XEN) ACPI: HEST BF7C9EE7, 0268 (r1 PTL WHEAPTL 60000 PTL 1) (XEN) ACPI: BERT BF7CA14F, 0030 (r1 PTL WHEAPTL 60000 PTL 1) (XEN) ACPI: SSDT BF7CA17F, 00E1 (r1 wheaos wheaosc 60000 INTL 20050624) (XEN) ACPI: ERST BF7CA260, 0270 (r1 PTL WHEAPTL 60000 PTL 1) (XEN) ACPI: SSDT BF7CA4D0, 00D8 (r1 FSC CST_PR00 60000 CSF 1) (XEN) ACPI: SSDT BF7CA5A8, 00D8 (r1 FSC CST_PR02 60000 CSF 1) (XEN) ACPI: SSDT BF7CA680, 00D8 (r1 FSC CST_PR04 60000 CSF 1) (XEN) ACPI: SSDT BF7CA758, 00D8 (r1 FSC CST_PR06 60000 CSF 1) (XEN) ACPI: SSDT BF7CA830, 015B (r1 FSC PST_PR00 60000 CSF 1) (XEN) ACPI: SSDT BF7CA98B, 015B (r1 FSC PST_PR02 60000 CSF 1) (XEN) ACPI: SSDT BF7CAAE6, 015B (r1 FSC PST_PR04 60000 CSF 1) (XEN) ACPI: SSDT BF7CAC41, 015B (r1 FSC PST_PR06 60000 CSF 1) (XEN) ACPI: SPCR BF7CAD9C, 0050 (r1 PTLTD $UCRTBL$ 60000 PTL 1) (XEN) ACPI: DMAR BF7CADEC, 00E8 (r1 Intel OEMDMAR 60000 LOHR 1) (XEN) ACPI: MCFG BF7CAED4, 003C (r1 PTLTD MCFG 60000 LTP 0) (XEN) ACPI: HPET BF7CAF10, 0038 (r1 PTLTD HPETTBL 60000 LTP 1) (XEN) ACPI: APIC BF7CAF48, 0090 (r1 PTLTD APIC 60000 LTP 0) (XEN) ACPI: BOOT BF7CAFD8, 0028 (r1 PTLTD $SBFTBL$ 60000 LTP 1) (XEN) NUMA turned off (XEN) Faking a node at 0000000000000000-0000000340000000 (XEN) Domain heap initialised (XEN) found SMP MP-table at 000f8120 (XEN) DMI present. (XEN) Using APIC driver default (XEN) ACPI: PM-Timer IO Port: 0x1008 (XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[1004,0], pm1x_evt[1000,0] (XEN) ACPI: wakeup_vec[bf7cbfcc], vec_size[20] (XEN) ACPI: Local APIC address 0xfee00000 (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) (XEN) Processor #0 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) (XEN) Processor #2 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) (XEN) Processor #4 7:10 APIC version 21 (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled) (XEN) Processor #6 7:10 APIC version 21 (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) (XEN) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) (XEN) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) (XEN) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 (XEN) ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24]) (XEN) IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI 24-47 (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) (XEN) ACPI: IRQ0 used by override. (XEN) ACPI: IRQ2 used by override. (XEN) ACPI: IRQ9 used by override. (XEN) Enabling APIC mode: Flat. Using 2 I/O APICs (XEN) ACPI: HPET id: 0x8086a301 base: 0xfed00000 (XEN) Using ACPI (MADT) for SMP configuration information (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Initializing CPU#0 (XEN) Detected 2266.816 MHz processor. (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 256K (XEN) CPU: L3 cache: 8192K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU: Processor Core ID: 0 (XEN) VMX: Supported advanced features: (XEN) - APIC MMIO access virtualisation (XEN) - APIC TPR shadow (XEN) - Extended Page Tables (EPT) (XEN) - Virtual-Processor Identifiers (VPID) (XEN) - Virtual NMI (XEN) - MSR direct-access bitmap (XEN) VMX: EPT is available. (XEN) VMX: VPID is available. (XEN) HVM: VMX enabled (XEN) HVM: Hardware Assisted Paging detected. (XEN) Intel machine check reporting enabled on CPU#0. (XEN) mce_init: init bank0 (XEN) CPU0: Thermal monitoring enabled (TM1) (XEN) CMCI: find owner on CPU0 (XEN) CMCI: CPU0 owner_map[6c], no_cmci_map[93] (XEN) CPU0: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05 (XEN) Booting processor 1/2 eip 8c000 (XEN) Initializing CPU#1 (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 256K (XEN) CPU: L3 cache: 8192K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU: Processor Core ID: 1 (XEN) Intel machine check reporting enabled on CPU#1. (XEN) CPU1: Thermal monitoring enabled (TM1) (XEN) CMCI: find owner on CPU1 (XEN) CMCI: CPU1 owner_map[2c], no_cmci_map[93] (XEN) CPU1: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05 (XEN) Booting processor 2/4 eip 8c000 (XEN) Initializing CPU#2 (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 256K (XEN) CPU: L3 cache: 8192K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU: Processor Core ID: 2 (XEN) Intel machine check reporting enabled on CPU#2. (XEN) CPU2: Thermal monitoring enabled (TM1) (XEN) CMCI: find owner on CPU2 (XEN) CMCI: CPU2 owner_map[2c], no_cmci_map[93] (XEN) CPU2: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05 (XEN) Booting processor 3/6 eip 8c000 (XEN) Initializing CPU#3 (XEN) CPU: L1 I cache: 32K, L1 D cache: 32K (XEN) CPU: L2 cache: 256K (XEN) CPU: L3 cache: 8192K (XEN) CPU: Physical Processor ID: 0 (XEN) CPU: Processor Core ID: 3 (XEN) Intel machine check reporting enabled on CPU#3. (XEN) CPU3: Thermal monitoring enabled (TM1) (XEN) CMCI: find owner on CPU3 (XEN) CMCI: CPU3 owner_map[2c], no_cmci_map[93] (XEN) CPU3: Intel(R) Xeon(R) CPU E5520 @ 2.27GHz stepping 05 (XEN) Total of 4 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1 (XEN) checking TSC synchronization across 4 CPUs: passed. (XEN) Platform timer is 14.318MHz HPET (XEN) microcode.c:73:d32767 microcode: CPU1 resumed (XEN) Brought up 4 CPUs (XEN) microcode.c:73:d32767 microcode: CPU3 resumed (XEN) microcode.c:73:d32767 microcode: CPU2 resumed (XEN) I/O virtualisation disabled (XEN) HPET: 4 timers in total, 0 timers will be used for broadcast (XEN) ACPI sleep modes: S3 (XEN) mcheck_poll: Machine check polling timer started. (XEN) *** LOADING DOMAIN 0 *** (XEN) elf_parse_binary: phdr: paddr=0x200000 memsz=0x459000 (XEN) elf_parse_binary: phdr: paddr=0x659000 memsz=0xad1c8 (XEN) elf_parse_binary: phdr: paddr=0x707000 memsz=0x888 (XEN) elf_parse_binary: phdr: paddr=0x708000 memsz=0x1250b8 (XEN) elf_parse_binary: memory: 0x200000 -> 0x82d0b8 (XEN) elf_xen_parse_note: GUEST_OS = "linux" (XEN) elf_xen_parse_note: GUEST_VERSION = "2.6" (XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0" (XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000 (XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0 (XEN) elf_xen_parse_note: ENTRY = 0xffffffff80200000 (XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff80207000 (XEN) elf_xen_parse_note: unknown xen elf note (0xd) (XEN) elf_xen_parse_note: FEATURES = "writable_page_tables|writable_descriptor_tables|auto_translated_physmap|pae_pgdir_above_4gb|supervisor_mode_kernel" (XEN) elf_xen_parse_note: LOADER = "generic" (XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1 (XEN) elf_xen_addr_calc_check: addresses: (XEN) virt_base = 0xffffffff80000000 (XEN) elf_paddr_offset = 0x0 (XEN) virt_offset = 0xffffffff80000000 (XEN) virt_kstart = 0xffffffff80200000 (XEN) virt_kend = 0xffffffff8082d0b8 (XEN) virt_entry = 0xffffffff80200000 (XEN) p2m_base = 0xffffffffffffffff (XEN) Xen kernel: 64-bit, lsb, compat32 (XEN) Dom0 kernel: 64-bit, lsb, paddr 0x200000 -> 0x82d0b8 (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Dom0 alloc.: 0000000334000000->0000000336000000 (899584 pages to be allocated) (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: ffffffff80200000->ffffffff8082d0b8 (XEN) Init. ramdisk: ffffffff8082e000->ffffffff81209400 (XEN) Phys-Mach map: ffffffff8120a000->ffffffff818f7000 (XEN) Start info: ffffffff818f7000->ffffffff818f74b4 (XEN) Page tables: ffffffff818f8000->ffffffff81909000 (XEN) Boot stack: ffffffff81909000->ffffffff8190a000 (XEN) TOTAL: ffffffff80000000->ffffffff81c00000 (XEN) ENTRY ADDRESS: ffffffff80200000 (XEN) Dom0 has maximum 4 VCPUs (XEN) elf_load_binary: phdr 0 at 0xffffffff80200000 -> 0xffffffff80659000 (XEN) elf_load_binary: phdr 1 at 0xffffffff80659000 -> 0xffffffff807061c8 (XEN) elf_load_binary: phdr 2 at 0xffffffff80707000 -> 0xffffffff80707888 (XEN) elf_load_binary: phdr 3 at 0xffffffff80708000 -> 0xffffffff807566a0 (XEN) Scrubbing Free RAM: ......................................................................................done. (XEN) Xen trace buffers: disabled (XEN) Std. Loglevel: All (XEN) Guest Loglevel: All (XEN) ********************************************** (XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS (XEN) ******* This option is intended to aid debugging of Xen by ensuring (XEN) ******* that all output is synchronously delivered on the serial line. (XEN) ******* However it can introduce SIGNIFICANT latencies and affect (XEN) ******* timekeeping. It is NOT recommended for production use! (XEN) ********************************************** (XEN) 3... 2... 1... (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen) (XEN) Freed 132kB init memory. Kernel alive Kernel really alive Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.27.19-5-xen (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2009-02-28 04:40:21 +0100 Command line: root=/dev/md11 splash=silent showopts vga=0x314 console=ttyS0,38400,8n1 console=tty0 xencons=ttyS0 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls Xen-provided physical RAM map: Xen: 0000000000000000 - 00000000de200000 (usable) DMI present. last_pfn = 0xde200 max_arch_pfn = 0x6ffffff init_memory_mapping last_map_addr: de200000 end: de200000 RAMDISK: 0082e000 - 01209400 ACPI: RSDP 000F80F0, 0024 (r2 PTLTD ) ACPI: XSDT BF7C53B0, 00D4 (r1 PTLTD XSDT 60000 LTP 0) ACPI: FACP BF7C9BE1, 00F4 (r3 FSC TYLERBRG 60000 PTL F4240) ACPI: DSDT BF7C5484, 46D9 (r1 FSC D2619 60000 MSFT 3000001) ACPI: FACS BF7CBFC0, 0040 ACPI: TCPA BF7C9CD5, 0032 (r1 Phoeni x 60000 TL 0) ACPI: SLIT BF7C9D07, 0030 (r1 FSC 60000 5A) ACPI: EINJ BF7C9D37, 01B0 (r1 PTL WHEAPTL 60000 PTL 1) ACPI: HEST BF7C9EE7, 0268 (r1 PTL WHEAPTL 60000 PTL 1) ACPI: BERT BF7CA14F, 0030 (r1 PTL WHEAPTL 60000 PTL 1) ACPI: SSDT BF7CA17F, 00E1 (r1 wheaos wheaosc 60000 INTL 20050624) ACPI: ERST BF7CA260, 0270 (r1 PTL WHEAPTL 60000 PTL 1) ACPI: SSDT BF7CA4D0, 00D8 (r1 FSC CST_PR00 60000 CSF 1) ACPI: SSDT BF7CA5A8, 00D8 (r1 FSC CST_PR02 60000 CSF 1) ACPI: SSDT BF7CA680, 00D8 (r1 FSC CST_PR04 60000 CSF 1) ACPI: SSDT BF7CA758, 00D8 (r1 FSC CST_PR06 60000 CSF 1) ACPI: SSDT BF7CA830, 015B (r1 FSC PST_PR00 60000 CSF 1) ACPI: SSDT BF7CA98B, 015B (r1 FSC PST_PR02 60000 CSF 1) ACPI: SSDT BF7CAAE6, 015B (r1 FSC PST_PR04 60000 CSF 1) ACPI: SSDT BF7CAC41, 015B (r1 FSC PST_PR06 60000 CSF 1) ACPI: SPCR BF7CAD9C, 0050 (r1 PTLTD $UCRTBL$ 60000 PTL 1) ACPI: BF7CADEC, 00E8 (r1 Intel OEMDMAR 60000 LOHR 1) ACPI: MCFG BF7CAED4, 003C (r1 PTLTD MCFG 60000 LTP 0) ACPI: HPET BF7CAF10, 0038 (r1 PTLTD HPETTBL 60000 LTP 1) ACPI: APIC BF7CAF48, 0090 (r1 PTLTD APIC 60000 LTP 0) ACPI: BOOT BF7CAFD8, 0028 (r1 PTLTD $SBFTBL$ 60000 LTP 1) (4 early reservations) ==> bootmem [0000000000 - 00dda00000] #0 [0000200000 - 000082d0b8] TEXT DATA BSS ==> [0000200000 - 000082d0b8] #1 [000082e000 - 0001909000] Xen provided ==> [000082e000 - 0001909000] #2 [0001909000 - 000190c000] INITMAP ==> [0001909000 - 000190c000] #3 [000190c000 - 0002002000] PGTABLE ==> [000190c000 - 0002002000] found SMP MP-table at [ffffffffff5f0120] 000f8120 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00100000 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0x00000000 -> 0x000de200 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24]) IOAPIC[1]: apic_id 3, version 0, address 0xfec80000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at c2000000 (gap: c0000000:20000000) PERCPU: Allocating 50848 bytes of per cpu data Built 1 zonelists in Zone order, mobility grouping on. Total pages: 895608 Kernel command line: root=/dev/md11 splash=silent showopts vga=0x314 console=ttyS0,38400,8n1 console=tty0 xencons=ttyS0 bootsplash: silent mode. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 Xen reported: 2266.748 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled console [ttyS0] enabled Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Software IO TLB enabled: Aperture: 64 megabytes Kernel range: ffff880005e9f000 - ffff880009e9f000 Address size: 27 bits PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Memory: 3469944k/3639296k available (2483k kernel code, 160452k reserved, 2190k data, 284k init) Calibrating delay using timer specific routine.. 4535.34 BogoMIPS (lpj=9070687) Security Framework initialized AppArmor: AppArmor initialized Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 SMP alternatives: switching to UP code ACPI: Core revision 20080609 Parsing all Control Methods: Table [DSDT](id 0001) - 563 Objects with 64 Devices 124 Methods 34 Regions Parsing all Control Methods: Table [SSDT](id 0002) - 8 Objects with 0 Devices 1 Methods 2 Regions Parsing all Control Methods: Table [SSDT](id 0003) - 2 Objects with 0 Devices 0 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0004) - 2 Objects with 0 Devices 0 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0005) - 2 Objects with 0 Devices 0 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0006) - 2 Objects with 0 Devices 0 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0007) - 3 Objects with 0 Devices 0 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0008) - 3 Objects with 0 Devices 0 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 0009) - 3 Objects with 0 Devices 0 Methods 0 Regions Parsing all Control Methods: Table [SSDT](id 000A) - 3 Objects with 0 Devices 0 Methods 0 Regions tbxface-0596 [00] tb_load_namespace : ACPI Tables successfully acquired evxfevnt-0091 [00] enable : Transition to ACPI mode successful SMP alternatives: switching to SMP code Initializing CPU#1 Initializing CPU#2 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 Brought up 4 CPUs Initializing CPU#3 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 net_namespace: 1936 bytes CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 256K CPU: L3 cache: 8192K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 10 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG at e0000000 - e0afffff PCI: Using configuration type 1 for base access evgpeblk-0957 [00] ev_create_gpe_block : GPE 00 to 3F [_GPE] 8 regs on int 0x9 Completing Region/Field/Buffer/Package initialization:.................................................................................................. Initialized 31/36 Regions 0/0 Fields 24/24 Buffers 43/43 Packages (600 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:............. Executed 13 _INI methods requiring 13 _STA executions (examined 82 objects) evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 9 Wake, Enabled 1 Runtime GPEs in this block ACPI: Interpreter enabled ACPI: (supports S0 S1 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [CPU0] (0000:ff) ACPI: PCI Root Bridge [CPU1] (0000:fe) ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: PME# supported from D0 D3hot D3cold pci 0000:00:00.0: PME# disabled pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: PME# disabled pci 0000:00:07.0: PME# supported from D0 D3hot D3cold pci 0000:00:07.0: PME# disabled pci 0000:00:08.0: PME# supported from D0 D3hot D3cold pci 0000:00:08.0: PME# disabled pci 0000:00:09.0: PME# supported from D0 D3hot D3cold pci 0000:00:09.0: PME# disabled pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold pci 0000:00:1c.4: PME# disabled pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:08:00.0: PME# supported from D0 D3hot D3cold pci 0000:08:00.0: PME# disabled pci 0000:08:00.1: PME# supported from D0 D3hot D3cold pci 0000:08:00.1: PME# disabled pci 0000:00:1e.0: transparent bridge ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) ACPI Warning (tbutils-0217): Incorrect checksum in table [ ] - 41, should be 85 [20080609] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered xen_mem: Initialising balloon driver. PCI: Using ACPI for IRQ routing AppArmor: AppArmor Filesystem Enabled ACPI: RTC can wake from S4 system 00:00: iomem range 0xe0000000-0xefffffff could not be reserved system 00:04: ioport range 0x200-0x20f has been reserved system 00:04: ioport range 0x4d0-0x4d1 has been reserved system 00:04: ioport range 0x500-0x57f has been reserved system 00:04: ioport range 0x800-0x80f has been reserved system 00:04: ioport range 0x810-0x81f has been reserved system 00:04: ioport range 0xca0-0xca1 has been reserved system 00:04: ioport range 0xca4-0xca7 has been reserved system 00:04: ioport range 0xca8-0xcab has been reserved system 00:04: ioport range 0xcae-0xcaf has been reserved system 00:04: ioport range 0xe00-0xe7f has been reserved system 00:04: ioport range 0x1000-0x107f has been reserved system 00:04: ioport range 0x1100-0x110f has been reserved system 00:04: ioport range 0x1180-0x11ff has been reserved system 00:04: ioport range 0xfe00-0xfe00 has been reserved system 00:04: ioport range 0xff00-0xff00 has been reserved system 00:04: iomem range 0xfec00000-0xfecfffff could not be reserved system 00:04: iomem range 0xfee00000-0xfeefffff could not be reserved system 00:04: iomem range 0xfed1c000-0xfed1ffff has been reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: 0x2000-0x2fff pci 0000:00:01.0: MEM window: 0xce100000-0xce1fffff pci 0000:00:01.0: PREFETCH window: 0x000000c2000000-0x000000c20fffff pci 0000:00:03.0: PCI bridge, secondary bus 0000:02 pci 0000:00:03.0: IO window: 0x3000-0x3fff pci 0000:00:03.0: MEM window: 0xce200000-0xce2fffff pci 0000:00:03.0: PREFETCH window: 0x000000c2100000-0x000000c21fffff pci 0000:00:05.0: PCI bridge, secondary bus 0000:03 pci 0000:00:05.0: IO window: disabled pci 0000:00:05.0: MEM window: disabled pci 0000:00:05.0: PREFETCH window: disabled pci 0000:00:07.0: PCI bridge, secondary bus 0000:04 pci 0000:00:07.0: IO window: disabled pci 0000:00:07.0: MEM window: disabled pci 0000:00:07.0: PREFETCH window: disabled pci 0000:00:08.0: PCI bridge, secondary bus 0000:05 pci 0000:00:08.0: IO window: disabled pci 0000:00:08.0: MEM window: disabled pci 0000:00:08.0: PREFETCH window: disabled pci 0000:00:09.0: PCI bridge, secondary bus 0000:06 pci 0000:00:09.0: IO window: disabled pci 0000:00:09.0: MEM window: disabled pci 0000:00:09.0: PREFETCH window: disabled pci 0000:00:0a.0: PCI bridge, secondary bus 0000:07 pci 0000:00:0a.0: IO window: disabled pci 0000:00:0a.0: MEM window: disabled pci 0000:00:0a.0: PREFETCH window: disabled pci 0000:00:1c.0: PCI bridge, secondary bus 0000:08 pci 0000:00:1c.0: IO window: 0x4000-0x4fff pci 0000:00:1c.0: MEM window: 0xce300000-0xce3fffff pci 0000:00:1c.0: PREFETCH window: 0x000000c2200000-0x000000c22fffff pci 0000:00:1c.4: PCI bridge, secondary bus 0000:09 pci 0000:00:1c.4: IO window: disabled pci 0000:00:1c.4: MEM window: 0xce400000-0xceffffff pci 0000:00:1c.4: PREFETCH window: 0x000000cf000000-0x000000cfffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0a pci 0000:00:1e.0: IO window: disabled pci 0000:00:1e.0: MEM window: disabled pci 0000:00:1e.0: PREFETCH window: disabled pci 0000:00:01.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28 pci 0000:00:03.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 pci 0000:00:05.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26 pci 0000:00:07.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30 pci 0000:00:08.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31 pci 0000:00:09.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32 pci 0000:00:0a.0: PCI INT A -> GSI 33 (level, low) -> IRQ 33 pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 bus: ff index 0 io port: [0, ffff] bus: ff index 1 mmio: [0, ffffffffffffffff] bus: fe index 0 io port: [0, ffff] bus: fe index 1 mmio: [0, ffffffffffffffff] bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [0, ffffffffffffffff] bus: 01 index 0 io port: [2000, 2fff] bus: 01 index 1 mmio: [ce100000, ce1fffff] bus: 01 index 2 mmio: [c2000000, c20fffff] bus: 01 index 3 mmio: [0, 0] bus: 02 index 0 io port: [3000, 3fff] bus: 02 index 1 mmio: [ce200000, ce2fffff] bus: 02 index 2 mmio: [c2100000, c21fffff] bus: 02 index 3 mmio: [0, 0] bus: 03 index 0 mmio: [0, 0] bus: 03 index 1 mmio: [0, 0] bus: 03 index 2 mmio: [0, 0] bus: 03 index 3 mmio: [0, 0] bus: 04 index 0 mmio: [0, 0] bus: 04 index 1 mmio: [0, 0] bus: 04 index 2 mmio: [0, 0] bus: 04 index 3 mmio: [0, 0] bus: 05 index 0 mmio: [0, 0] bus: 05 index 1 mmio: [0, 0] bus: 05 index 2 mmio: [0, 0] bus: 05 index 3 mmio: [0, 0] bus: 06 index 0 mmio: [0, 0] bus: 06 index 1 mmio: [0, 0] bus: 06 index 2 mmio: [0, 0] bus: 06 index 3 mmio: [0, 0] bus: 07 index 0 mmio: [0, 0] bus: 07 index 1 mmio: [0, 0] bus: 07 index 2 mmio: [0, 0] bus: 07 index 3 mmio: [0, 0] bus: 08 index 0 io port: [4000, 4fff] bus: 08 index 1 mmio: [ce300000, ce3fffff] bus: 08 index 2 mmio: [c2200000, c22fffff] bus: 08 index 3 mmio: [0, 0] bus: 09 index 0 mmio: [0, 0] bus: 09 index 1 mmio: [ce400000, ceffffff] bus: 09 index 2 mmio: [cf000000, cfffffff] bus: 09 index 3 mmio: [0, 0] bus: 0a index 0 mmio: [0, 0] bus: 0a index 1 mmio: [0, 0] bus: 0a index 2 mmio: [0, 0] bus: 0a index 3 io port: [0, ffff] bus: 0a index 4 mmio: [0, ffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 Unpacking initramfs... done Freeing initrd memory: 10093k freed Simple Boot Flag at 0x7c set to 0x1 audit: initializing netlink socket (disabled) type=2000 audit(1256132858.083:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 1777 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) (XEN) PCI add device 00:01.0 pcieport-driver 0000:00:01.0: found MSI capability (XEN) PCI add device 00:03.0 pcieport-driver 0000:00:03.0: found MSI capability (XEN) PCI add device 00:05.0 pcieport-driver 0000:00:05.0: found MSI capability (XEN) PCI add device 00:07.0 pcieport-driver 0000:00:07.0: found MSI capability (XEN) PCI add device 00:08.0 pcieport-driver 0000:00:08.0: found MSI capability (XEN) PCI add device 00:09.0 pcieport-driver 0000:00:09.0: found MSI capability (XEN) PCI add device 00:0a.0 pcieport-driver 0000:00:0a.0: found MSI capability (XEN) PCI add device 00:1c.0 pcieport-driver 0000:00:1c.0: found MSI capability (XEN) PCI add device 00:1c.4 pcieport-driver 0000:00:1c.4: found MSI capability Non-volatile memory driver v1.2 Xen virtual console successfully installed as ttyS0 Event-channel device installed. PNP: No PS/2 controller found. Probing ports directly. i8042.c: No controller found. mice: PS/2 mouse device common for all mice TCP cubic registered registered taskstats version 1 Freeing unused kernel memory: 284k freed Write protecting the kernel read-only data: 4420k SCSI subsystem initialized megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008 (XEN) PCI add device 01:00.0 megasas: 0x1000:0x0060:0x1734:0x10f9: bus 1:slot 0:func 0 vendor=8086 device=3408 megaraid_sas 0000:01:00.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28 megasas: FW now in Ready state scsi0 : LSI SAS based MegaRAID driver scsi 0:0:4:0: Enclosure FSC SAS Expander 1.04 PQ: 0 ANSI: 3 scsi 0:0:5:0: Direct-Access SEAGATE ST9146802SS 2101 PQ: 0 ANSI: 5 scsi 0:0:6:0: Direct-Access SEAGATE ST9146802SS 2101 PQ: 0 ANSI: 5 scsi 0:0:7:0: Enclosure FSC SAS Expander 1.04 PQ: 0 ANSI: 3 scsi 0:2:0:0: Direct-Access LSI MegaRAID SAS RMB 1.40 PQ: 0 ANSI: 5 scsi 0:2:1:0: Direct-Access LSI MegaRAID SAS RMB 1.40 PQ: 0 ANSI: 5 scsi 0:2:2:0: Direct-Access LSI MegaRAID SAS RMB 1.40 PQ: 0 ANSI: 5 scsi 0:2:3:0: Direct-Access LSI MegaRAID SAS RMB 1.40 PQ: 0 ANSI: 5 scsi 0:2:4:0: Direct-Access LSI MegaRAID SAS RMB 1.40 PQ: 0 ANSI: 5 scsi 0:2:5:0: Direct-Access LSI MegaRAID SAS RMB 1.40 PQ: 0 ANSI: 5 Emulex LightPulse Fibre Channel SCSI driver 8.2.8.14 Copyright(c) 2004-2009 Emulex. All rights reserved. (XEN) PCI add device 02:00.0 vendor=8086 device=340a lpfc 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 scsi1 : on PCI bus 02 device 00 irq 24 (XEN) PCI add device 02:00.1 vendor=8086 device=340a lpfc 0000:02:00.1: PCI INT B -> GSI 34 (level, low) -> IRQ 34 scsi2 : on PCI bus 02 device 01 irq 34 ACPI: CPU0 (power states: C1[C1] C3[C3]) (XEN) Set CPU acpi_id(0) cpuid(0) Px State info: (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0 (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0 (XEN) _PSS: state_count=7 (XEN) State0: 2262MHz 101000mW 50us 150us 0x12 0x12 (XEN) State1: 2261MHz 100000mW 50us 150us 0x11 0x11 (XEN) State2: 2128MHz 94000mW 50us 150us 0x10 0x10 (XEN) State3: 1995MHz 88000mW 50us 150us 0xf 0xf (XEN) State4: 1862MHz 82000mW 50us 150us 0xe 0xe (XEN) State5: 1729MHz 76000mW 50us 150us 0xd 0xd (XEN) State6: 1596MHz 70000mW 50us 150us 0xc 0xc (XEN) _PSD: num_entries=5 rev=0 domain=0 coord_type=252 num_processors=1 (XEN) _PPC: 0 (XEN) xen_pminfo: @acpi_cpufreq_cpu_init,HARDWARE addr space (XEN) CPU 0 initialization completed processor ACPI_CPU:00: registered as cooling_device0 No available Cx info for cpu 255 processor ACPI_CPU:01: registered as cooling_device1 ACPI: CPU2 (power states: C1[C1] C3[C3]) (XEN) Set CPU acpi_id(1) cpuid(1) Px State info: (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0 (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0 (XEN) _PSS: state_count=7 (XEN) State0: 2262MHz 101000mW 50us 150us 0x12 0x12 (XEN) State1: 2261MHz 100000mW 50us 150us 0x11 0x11 (XEN) State2: 2128MHz 94000mW 50us 150us 0x10 0x10 (XEN) State3: 1995MHz 88000mW 50us 150us 0xf 0xf (XEN) State4: 1862MHz 82000mW 50us 150us 0xe 0xe (XEN) State5: 1729MHz 76000mW 50us 150us 0xd 0xd (XEN) State6: 1596MHz 70000mW 50us 150us 0xc 0xc (XEN) _PSD: num_entries=5 rev=0 domain=1 coord_type=252 num_processors=1 (XEN) _PPC: 0 (XEN) xen_pminfo: @acpi_cpufreq_cpu_init,HARDWARE addr space (XEN) CPU 1 initialization completed processor ACPI_CPU:02: registered as cooling_device2 BIOS reported wrong ACPI id for the processor ACPI Exception (evxface-0544): AE_NOT_EXIST, Removing notify handler [20080609] ACPI: CPU-1 (power states: C1[C1] C3[C3]) (XEN) Set CPU acpi_id(2) cpuid(2) Px State info: (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0 (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0 (XEN) _PSS: state_count=7 (XEN) State0: 2262MHz 101000mW 50us 150us 0x12 0x12 (XEN) State1: 2261MHz 100000mW 50us 150us 0x11 0x11 (XEN) State2: 2128MHz 94000mW 50us 150us 0x10 0x10 (XEN) State3: 1995MHz 88000mW 50us 150us 0xf 0xf (XEN) State4: 1862MHz 82000mW 50us 150us 0xe 0xe (XEN) State5: 1729MHz 76000mW 50us 150us 0xd 0xd (XEN) State6: 1596MHz 70000mW 50us 150us 0xc 0xc (XEN) _PSD: num_entries=5 rev=0 domain=2 coord_type=252 num_processors=1 (XEN) _PPC: 0 (XEN) xen_pminfo: @acpi_cpufreq_cpu_init,HARDWARE addr space (XEN) CPU 2 initialization completed processor ACPI_CPU:04: registered as cooling_device3 No available Cx info for cpu 255 processor ACPI_CPU:05: registered as cooling_device4 ACPI: CPU-1 (power states: C1[C1] C3[C3]) (XEN) Set CPU acpi_id(3) cpuid(3) Px State info: (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0 (XEN) _PCT: descriptor=130, length=12, space_id=127, bit_width=0, bit_offset=0, reserved=0, address=0 (XEN) _PSS: state_count=7 (XEN) State0: 2262MHz 101000mW 50us 150us 0x12 0x12 (XEN) State1: 2261MHz 100000mW 50us 150us 0x11 0x11 (XEN) State2: 2128MHz 94000mW 50us 150us 0x10 0x10 (XEN) State3: 1995MHz 88000mW 50us 150us 0xf 0xf (XEN) State4: 1862MHz 82000mW 50us 150us 0xe 0xe (XEN) State5: 1729MHz 76000mW 50us 150us 0xd 0xd (XEN) State6: 1596MHz 70000mW 50us 150us 0xc 0xc (XEN) _PSD: num_entries=5 rev=0 domain=3 coord_type=252 num_processors=1 (XEN) _PPC: 0 (XEN) xen_pminfo: @acpi_cpufreq_cpu_init,HARDWARE addr space (XEN) CPU 3 initialization completed processor ACPI_CPU:06: registered as cooling_device5 BIOS reported wrong ACPI id for the processor ACPI Exception (evxface-0544): AE_NOT_EXIST, Removing notify handler [20080609] No available Cx info for cpu 255 processor ACPI_CPU:08: registered as cooling_device6 BIOS reported wrong ACPI id for the processor ACPI Exception (evxface-0544): AE_NOT_EXIST, Removing notify handler [20080609] No available Cx info for cpu 255 processor ACPI_CPU:0a: registered as cooling_device7 BIOS reported wrong ACPI id for the processor ACPI Exception (evxface-0544): AE_NOT_EXIST, Removing notify handler [20080609] No available Cx info for cpu 255 processor ACPI_CPU:0c: registered as cooling_device8 BIOS reported wrong ACPI id for the processor ACPI Exception (evxface-0544): AE_NOT_EXIST, Removing notify handler [20080609] No available Cx info for cpu 255 processor ACPI_CPU:0e: registered as cooling_device9 BIOS reported wrong ACPI id for the processor ACPI Exception (evxface-0544): AE_NOT_EXIST, Removing notify handler [20080609] ACPI: No dock devices found. (XEN) PCI add device 00:1f.2 ata_piix 0000:00:1f.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] scsi3 : ata_piix scsi4 : ata_piix ata1: SATA max UDMA/133 cmd 0x1c50 ctl 0x1c44 bmdma 0x1c10 irq 16 ata2: SATA max UDMA/133 cmd 0x1c48 ctl 0x1c40 bmdma 0x1c18 irq 16 ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.01: SATA link down (SStatus 0 SControl 300) ata1.00: ATAPI: HL-DT-ST DVDRAM GH40N, NV01, max UDMA/100 ata1.00: configured for UDMA/100 ata2.00: SATA link down (SStatus 0 SControl 300) ata2.01: SATA link down (SStatus 0 SControl 300) scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH40N NV01 PQ: 0 ANSI: 5 (XEN) PCI add device 00:1f.5 ata_piix 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] scsi5 : ata_piix scsi6 : ata_piix ata3: SATA max UDMA/133 cmd 0x1c68 ctl 0x1c5c bmdma 0x1c30 irq 17 ata4: SATA max UDMA/133 cmd 0x1c60 ctl 0x1c58 bmdma 0x1c38 irq 17 ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) Uniform Multi-Platform E-IDE driver md: raid1 personality registered for level 1 BIOS EDD facility v0.16 2004-Jun-25, 6 devices found usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver (XEN) PCI add device 00:1a.7 ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: irq 18, io mem 0xce020000 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.27.19-5-xen ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 (XEN) PCI add device 00:1d.7 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xce021000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.27.19-5-xen ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 USB Universal Host Controller Interface driver v3.0 (XEN) PCI add device 00:1a.0 uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 19, io base 0x00001820 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.27.19-5-xen uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 (XEN) PCI add device 00:1a.1 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 18, io base 0x00001840 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.27.19-5-xen uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 (XEN) PCI add device 00:1a.2 uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 18, io base 0x00001860 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.27.19-5-xen uhci_hcd usb usb5: SerialNumber: 0000:00:1a.2 (XEN) PCI add device 00:1d.0 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.27.19-5-xen uhci_hcd usb usb6: SerialNumber: 0000:00:1d.0 (XEN) PCI add device 00:1d.1 uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 22, io base 0x000018a0 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.27.19-5-xen uhci_hcd usb usb7: SerialNumber: 0000:00:1d.1 (XEN) PCI add device 00:1d.2 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1d.2: UHCI Host Controller usb 7-2: new full speed USB device using uhci_hcd and address 2 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 21, io base 0x000018c0 usb usb8: configuration #1 chosen from 1 choice hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected usb 7-2: configuration #1 chosen from 1 choice usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb8: Product: UHCI Host Controller usb usb8: Manufacturer: Linux 2.6.27.19-5-xen uhci_hcd usb usb8: SerialNumber: 0000:00:1d.2 netfront: Initialising virtual ethernet driver. input: FSC USB2 as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.0/input/input0 udevd version 128 started input,hidraw0: USB HID v1.10 Keyboard [FSC USB2] on usb-0000:00:1d.1-2 input: FSC USB2 as /devices/pci0000:00/0000:00:1d.1/usb7/7-2/7-2:1.1/input/input1 sd 0:2:0:0: [sda] 40960000 512-byte hardware sectors: (20.9GB/19.5GiB) sd 0:2:0:0: [sda] Write Protect is off sd 0:2:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA sd 0:2:0:0: [sda] 40960000 512-byte hardware sectors: (20.9GB/19.5GiB) sd 0:2:0:0: [sda] Write Protect is off sd 0:2:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA sda: sda1 sd 0:2:0:0: [sda] Attached SCSI disk sd 0:2:1:0: [sdb] 61440000 512-byte hardware sectors: (31.4GB/29.2GiB) sd 0:2:1:0: [sdb] Write Protect is off sd 0:2:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA sd 0:2:1:0: [sdb] 61440000 512-byte hardware sectors: (31.4GB/29.2GiB) sd 0:2:1:0: [sdb] Write Protect is off sd 0:2:1:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA sdb:<6>input,hidraw1: USB HID v1.10 Mouse [FSC USB2] on usb-0000:00:1d.1-2 usb 7-2: New USB device found, idVendor=0415, idProduct=0624 usb 7-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1 usb 7-2: Product: FSC USB2 usb 7-2: SerialNumber: 234415001B4 sdb1 sdb2 sd 0:2:1:0: [sdb] Attached SCSI disk sd 0:2:2:0: [sdc] 40960000 512-byte hardware sectors: (20.9GB/19.5GiB) sd 0:2:2:0: [sdc] Write Protect is off sd 0:2:2:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA sd 0:2:2:0: [sdc] 40960000 512-byte hardware sectors: (20.9GB/19.5GiB) sd 0:2:2:0: [sdc] Write Protect is off sd 0:2:2:0: [sdc] Write cache: disabled, read cache: enabled, supports DPO and FUA sdc: sdc1 sdc2 sd 0:2:2:0: [sdc] Attached SCSI disk sd 0:2:3:0: [sdd] 40960000 512-byte hardware sectors: (20.9GB/19.5GiB) sd 0:2:3:0: [sdd] Write Protect is off sd 0:2:3:0: [sdd] Write cache: disabled, read cache: enabled, supports DPO and FUA sd 0:2:3:0: [sdd] 40960000 512-byte hardware sectors: (20.9GB/19.5GiB) sd 0:2:3:0: [sdd] Write Protect is off sd 0:2:3:0: [sdd] Write cache: disabled, read cache: enabled, supports DPO and FUA sdd: unknown partition table sd 0:2:3:0: [sdd] Attached SCSI disk sd 0:2:4:0: [sde] 40960000 512-byte hardware sectors: (20.9GB/19.5GiB) sd 0:2:4:0: [sde] Write Protect is off sd 0:2:4:0: [sde] Write cache: disabled, read cache: enabled, supports DPO and FUA sd 0:2:4:0: [sde] 40960000 512-byte hardware sectors: (20.9GB/19.5GiB) sd 0:2:4:0: [sde] Write Protect is off sd 0:2:4:0: [sde] Write cache: disabled, read cache: enabled, supports DPO and FUA sde: sde1 < sde5 > sd 0:2:4:0: [sde] Attached SCSI disk sd 0:2:5:0: [sdf] 60391424 512-byte hardware sectors: (30.9GB/28.7GiB) sd 0:2:5:0: [sdf] Write Protect is off sd 0:2:5:0: [sdf] Write cache: disabled, read cache: enabled, supports DPO and FUA sd 0:2:5:0: [sdf] 60391424 512-byte hardware sectors: (30.9GB/28.7GiB) sd 0:2:5:0: [sdf] Write Protect is off sd 0:2:5:0: [sdf] Write cache: disabled, read cache: enabled, supports DPO and FUA sdf: sdf1 sdf2 sd 0:2:5:0: [sdf] Attached SCSI disk Boot logging started on /dev/tty1(/dev/console) at Wed Oct 21 13:48:20 2009 md: raid0 personality registered for level 0 xor: automatically using best checksumming function: generic_sse generic_sse: 5979.000 MB/sec xor: using function: generic_sse (5979.000 MB/sec) async_tx: api initialized (async) raid6: int64x1 2474 MB/s raid6: int64x2 3208 MB/s raid6: int64x4 2509 MB/s raid6: int64x8 2056 MB/s raid6: sse2x1 5617 MB/s raid6: sse2x2 6582 MB/s raid6: sse2x4 7619 MB/s raid6: using algorithm sse2x4 (7619 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 md: md11 stopped. md: bind raid1: raid set md11 active with 1 out of 2 mirrors mdadm: /dev/md/11 has been started with 1 drive (out of 2). Waiting for device /dev/md11 to appear: ok fsck 1.41.1 (01-Sep-2008) [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/md11 SQX2KR1: recovering journal SQX2KR1: clean, 116477/1281120 files, 2913465/5116672 blocks fsck succeeded. Mounting root device read-write. Mounting root /dev/md11 mount -o rw,acl,user_xattr -t ext3 /dev/md11 /root kjournald starting. Commit interval 5 seconds EXT3 FS on md11, internal journal EXT3-fs: mounted filesystem with ordered data mode. Boot logging started on /dev/tty1(/dev/console (deleted)) at Wed Oct 21 15:48:26 2009 Starting udevd: udevd version 128 started done Loading drivers, configuring devices: scsi 0:0:4:0: Attached scsi generic sg0 type 13 scsi 0:0:7:0: Attached scsi generic sg1 type 13 sd 0:2:0:0: Attached scsi generic sg2 type 0 sd 0:2:1:0: Attached scsi generic sg3 type 0 sd 0:2:2:0: Attached scsi generic sg4 type 0 sd 0:2:3:0: Attached scsi generic sg5 type 0 sd 0:2:4:0: Attached scsi generic sg6 type 0 sd 0:2:5:0: Attached scsi generic sg7 type 0 scsi 3:0:0:0: Attached scsi generic sg8 type 5 Initializing USB Mass Storage driver... scsi7 : SCSI emulation for USB Mass Storage devices scsi8 : SCSI emulation for USB Mass Storage devices sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray usbcore: registered new interface driver usb-storage USB Mass Storage support registered. Uniform CD-ROM driver Revision: 3.20 Intel(R) Gigabit Ethernet Network Driver - version 1.2.45-k2 Copyright (c) 2008 Intel Corporation. (XEN) PCI add device 08:00.0 vendor=8086 device=3a40 igb 0000:08:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 igb 0000:08:00.0: Intel(R) Gigabit Ethernet Network Connection igb 0000:08:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:19:99:48:e3:58 igb 0000:08:00.0: eth0: PBA No: 313130-031 igb 0000:08:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) (XEN) PCI add device 00:1f.3 (XEN) PCI add device 08:00.1 i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 vendor=8086 device=3a40 igb 0000:08:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 ses 0:0:4:0: Attached Enclosure device ses 0:0:7:0: Attached Enclosure device input: PC Speaker as /devices/platform/pcspkr/input/input4 igb 0000:08:00.1: Intel(R) Gigabit Ethernet Network Connection igb 0000:08:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:19:99:48:e3:59 igb 0000:08:00.1: eth1: PBA No: 313130-031 igb 0000:08:00.1: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s) ACPI: Power Button (CM) [PWRB] Serial: 8250/16550 driver8 ports, IRQ sharing disabled rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k Serial: 8250/16550 driver8 ports, IRQ sharing disabled 8250_pnp: Unknown symbol serial8250_unregister_port 8250_pnp: Unknown symbol serial8250_resume_port 8250_pnp: Unknown symbol serial8250_register_port 8250_pnp: Unknown symbol serial8250_suspend_port Serial: 8250/16550 driver8 ports, IRQ sharing disabled scsi 7:0:0:0: CD-ROM KVM vmDisk-CD 0.01 PQ: 0 ANSI: 0 scsi 8:0:0:0: Direct-Access KVM vmDisk 0.01 PQ: 0 ANSI: 0 sd 8:0:0:0: [sdg] Attached SCSI removable disk sd 8:0:0:0: Attached scsi generic sg9 type 0 sr1: scsi3-mmc drive: 0x/0x caddy sr 7:0:0:0: Attached scsi generic sg10 type 5 8250_pnp: gave up waiting for init of module 8250. 8250_pnp: Unknown symbol serial8250_unregister_port 8250_pnp: Unknown symbol serial8250_resume_port 8250_pnp: Unknown symbol serial8250_register_port 8250_pnp: Unknown symbol serial8250_suspend_port Serial: 8250/16550 driver8 ports, IRQ sharing disabled 8250_pnp: Unknown symbol serial8250_unregister_port 8250_pnp: Unknown symbol serial8250_resume_port 8250_pnp: Unknown symbol serial8250_register_port 8250_pnp: Unknown symbol serial8250_suspend_port 8250_pnp: Unknown symbol serial8250_unregister_port 8250_pnp: Unknown symbol serial8250_resume_port 8250_pnp: Unknown symbol serial8250_register_port 8250_pnp: Unknown symbol serial8250_suspend_port done Loading required kernel modules init_xsd: xsd driver entry point Activating swap-devices in /etc/fstab... done Adding 19531208k swap on /dev/sdb1. Priority:-1 extents:1 across:19531208k Setting up the system clockSetting up timezone data done done device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx Activating device mapper... done Starting MD Raid md: md12 stopped. md: bind raid1: raid set md12 active with 1 out of 2 mirrors mdadm: /dev/md/12 has been started with 1 drive (out of 2). md: md13 stopped. md: bind raid1: raid set md13 active with 1 out of 2 mirrors mdadm: /dev/md/13 has been started with 1 drive (out of 2).