|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] latest pv_ops dom0 (2.6.29-rc7) works!!
On Thu, Mar 05, 2009 at 12:10:01PM -0800, Jeremy Fitzhardinge wrote: > Pasi Kärkkäinen wrote: > >First time ever (on my testing box) disk attached to ata_piix is now > >actually detected and seems to work.. at least partly! > > > > Good! > > >See: > >http://pasik.reaktio.net/xen/pv_ops-dom0-debug/pv_ops-dom0-bootlog-17-xen331-linux-2.6.29-rc7-crash.txt > > > >But now I get crash when init is started.. > > > >Starting udev: BUG: unable to handle kernel paging request at c1106840 > >IP: [<c04045ef>] get_phys_to_machine+0x24/0x29 > >*pdpt = 000000005fa7a001 > >Thread overran stack, or stack corrupted > > > > Try again. I don't know if I specifically fixed this one, but I noticed > that it wasn't reserving the 32-bit Xen pagetables, so it might have > tried to reallocate them for the swiotlb buffer... > And now it boots all the way to login prompt!! Congratulations! http://pasik.reaktio.net/xen/pv_ops-dom0-debug/pv_ops-dom0-bootlog-18-xen331-linux-2.6.29-rc7.txt grub.conf: title Xen pv_ops dom0-test (2.6.29-rc7-tip) / serial console root (hd0,0) kernel /xen-3.3.gz dom0_mem=1024M loglvl=all guest_loglvl=all com1=19200,8n1 console=com1 module /vmlinuz-2.6.29-rc7-tip ro root=/dev/vg00/lv01 console=hvc0 earlyprintk=xen module /initrd-2.6.29-rc7-tip.img Network seems to be OK, I can ssh into the box: [root@dom0test ~]# uname -a Linux dom0test.localdomain 2.6.29-rc7-tip #7 SMP Thu Mar 5 22:33:17 EET 2009 i686 i686 i386 GNU/Linux [root@dom0test ~]# ethtool -i eth0 driver: tg3 version: 3.97 firmware-version: 5721-v3.29a, ASFIPMI v6.09 bus-info: 0000:04:00.0 [root@dom0test ~]# cat /proc/interrupts CPU0 CPU1 1: 36 0 xen-pirq-pirq i8042 3: 2 0 xen-pirq-pirq 6: 5 0 xen-pirq-pirq floppy 7: 0 0 xen-pirq-pirq parport0 8: 33 0 xen-pirq-pirq rtc0 9: 0 0 xen-pirq-pirq acpi 14: 3868 0 xen-pirq-pirq ata_piix 15: 0 0 xen-pirq-pirq ata_piix 16: 0 0 xen-pirq-pirq uhci_hcd:usb5, pata_pdc2027x 18: 1454 0 xen-pirq-pirq uhci_hcd:usb4, eth0 19: 1 0 xen-pirq-pirq ahci, uhci_hcd:usb3, eth1 23: 0 0 xen-pirq-pirq ehci_hcd:usb1, uhci_hcd:usb2 24: 0 0 xen-pirq-pirq sata_promise 48: 38110 0 xen-dyn-virq timer0 49: 2 0 xen-dyn-ipi spinlock0 50: 3280 0 xen-dyn-ipi resched0 51: 0 0 xen-dyn-ipi callfunc0 52: 0 0 xen-dyn-virq debug0 53: 118 0 xen-dyn-ipi callfuncsingle0 54: 0 34153 xen-dyn-virq timer1 55: 0 7 xen-dyn-ipi spinlock1 56: 0 4402 xen-dyn-ipi resched1 57: 0 0 xen-dyn-ipi callfunc1 58: 0 0 xen-dyn-virq debug1 59: 0 368 xen-dyn-ipi callfuncsingle1 60: 0 0 xen-dyn-event xenbus 61: 16 0 xen-dyn-virq hvc_console NMI: 0 0 Non-maskable interrupts LOC: 0 0 Local timer interrupts CNT: 0 0 Performance counter interrupts RES: 3280 4402 Rescheduling interrupts CAL: 118 368 Function call interrupts TLB: 0 0 TLB shootdowns TRM: 0 0 Thermal event interrupts SPU: 0 0 Spurious interrupts ERR: 0 MIS: 0 [root@dom0test ~]# lsmod Module Size Used by bridge 40160 0 stp 2032 1 bridge bnep 10852 2 sco 9036 2 l2cap 17616 3 bnep bluetooth 44556 5 bnep,sco,l2cap sunrpc 149716 1 ipv6 226944 26 dm_multipath 13520 0 uinput 6612 0 ppdev 6376 0 floppy 47220 0 i2c_i801 8228 0 i2c_core 17668 1 i2c_i801 iTCO_wdt 10456 0 pcspkr 2248 0 iTCO_vendor_support 2828 1 iTCO_wdt pata_pdc2027x 6968 0 tg3 91468 0 libphy 16496 1 tg3 sata_promise 10024 0 parport_pc 22096 0 parport 27956 2 ppdev,parport_pc ata_generic 4224 0 pata_acpi 3508 0 [root@dom0test ~]# mount | grep xen none on /proc/xen type xenfs (rw) [root@dom0test ~]# /etc/init.d/xend start Starting xend daemon: [FAILED] I'll start playing with that stuff tomorrow, now I need to get some sleep :) -- Pasi _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |