|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH 4 of 7] x86/paravirt: selectively save/restore regs around pvops calls
Each asm paravirt-ops call says what registers are available for
clobbering. This patch makes use of this to selectively save/restore
registers around each pvops call. In many cases this significantly
shrinks code size.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@xxxxxxxxxx>
---
arch/x86/include/asm/paravirt.h | 100 +++++++++++++++++++++++++--------------
1 file changed, 65 insertions(+), 35 deletions(-)
diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -12,19 +12,29 @@
#define CLBR_EAX (1 << 0)
#define CLBR_ECX (1 << 1)
#define CLBR_EDX (1 << 2)
+#define CLBR_EDI (1 << 3)
-#ifdef CONFIG_X86_64
-#define CLBR_RSI (1 << 3)
-#define CLBR_RDI (1 << 4)
+#ifdef CONFIG_X86_32
+/* CLBR_ANY should match all regs platform has. For i386, that's just it */
+#define CLBR_ANY ((1 << 4) - 1)
+#else
+#define CLBR_RAX CLBR_EAX
+#define CLBR_RCX CLBR_ECX
+#define CLBR_RDX CLBR_EDX
+#define CLBR_RDI CLBR_EDI
+#define CLBR_RSI (1 << 4)
#define CLBR_R8 (1 << 5)
#define CLBR_R9 (1 << 6)
#define CLBR_R10 (1 << 7)
#define CLBR_R11 (1 << 8)
#define CLBR_ANY ((1 << 9) - 1)
+
+#define CLBR_ARG_REGS (CLBR_RDI | CLBR_RSI | CLBR_RDX | \
+ CLBR_RCX | CLBR_R8 | CLBR_R9)
+#define CLBR_RET_REG (CLBR_RAX | CLBR_RDX)
+#define CLBR_SCRATCH (CLBR_R10 | CLBR_R11)
+
#include <asm/desc_defs.h>
-#else
-/* CLBR_ANY should match all regs platform has. For i386, that's just it */
-#define CLBR_ANY ((1 << 3) - 1)
#endif /* X86_64 */
#ifndef __ASSEMBLY__
@@ -1528,33 +1538,49 @@
.popsection
+#define COND_PUSH(set, mask, reg) \
+ .if ((~set) & mask); push %reg; .endif
+#define COND_POP(set, mask, reg) \
+ .if ((~set) & mask); pop %reg; .endif
+
#ifdef CONFIG_X86_64
-#define PV_SAVE_REGS \
- push %rax; \
- push %rcx; \
- push %rdx; \
- push %rsi; \
- push %rdi; \
- push %r8; \
- push %r9; \
- push %r10; \
- push %r11
-#define PV_RESTORE_REGS \
- pop %r11; \
- pop %r10; \
- pop %r9; \
- pop %r8; \
- pop %rdi; \
- pop %rsi; \
- pop %rdx; \
- pop %rcx; \
- pop %rax
+
+#define PV_SAVE_REGS(set) \
+ COND_PUSH(set, CLBR_RAX, rax); \
+ COND_PUSH(set, CLBR_RCX, rcx); \
+ COND_PUSH(set, CLBR_RDX, rdx); \
+ COND_PUSH(set, CLBR_RSI, rsi); \
+ COND_PUSH(set, CLBR_RDI, rdi); \
+ COND_PUSH(set, CLBR_R8, r8); \
+ COND_PUSH(set, CLBR_R9, r9); \
+ COND_PUSH(set, CLBR_R10, r10); \
+ COND_PUSH(set, CLBR_R11, r11)
+#define PV_RESTORE_REGS(set) \
+ COND_POP(set, CLBR_R11, r11); \
+ COND_POP(set, CLBR_R10, r10); \
+ COND_POP(set, CLBR_R9, r9); \
+ COND_POP(set, CLBR_R8, r8); \
+ COND_POP(set, CLBR_RDI, rdi); \
+ COND_POP(set, CLBR_RSI, rsi); \
+ COND_POP(set, CLBR_RDX, rdx); \
+ COND_POP(set, CLBR_RCX, rcx); \
+ COND_POP(set, CLBR_RAX, rax)
+
#define PARA_PATCH(struct, off) ((PARAVIRT_PATCH_##struct + (off)) / 8)
#define PARA_SITE(ptype, clobbers, ops) _PVSITE(ptype, clobbers, ops, .quad, 8)
#define PARA_INDIRECT(addr) *addr(%rip)
#else
-#define PV_SAVE_REGS pushl %eax; pushl %edi; pushl %ecx; pushl %edx
-#define PV_RESTORE_REGS popl %edx; popl %ecx; popl %edi; popl %eax
+#define PV_SAVE_REGS(set) \
+ COND_PUSH(set, CLBR_EAX, eax); \
+ COND_PUSH(set, CLBR_EDI, edi); \
+ COND_PUSH(set, CLBR_ECX, ecx); \
+ COND_PUSH(set, CLBR_EDX, edx)
+#define PV_RESTORE_REGS(set) \
+ COND_POP(set, CLBR_EDX, edx); \
+ COND_POP(set, CLBR_ECX, ecx); \
+ COND_POP(set, CLBR_EDI, edi); \
+ COND_POP(set, CLBR_EAX, eax)
+
#define PARA_PATCH(struct, off) ((PARAVIRT_PATCH_##struct + (off)) / 4)
#define PARA_SITE(ptype, clobbers, ops) _PVSITE(ptype, clobbers, ops, .long, 4)
#define PARA_INDIRECT(addr) *%cs:addr
@@ -1566,15 +1592,15 @@
#define DISABLE_INTERRUPTS(clobbers) \
PARA_SITE(PARA_PATCH(pv_irq_ops, PV_IRQ_irq_disable), clobbers, \
- PV_SAVE_REGS; \
+ PV_SAVE_REGS(clobbers); \
call PARA_INDIRECT(pv_irq_ops+PV_IRQ_irq_disable); \
- PV_RESTORE_REGS;) \
+ PV_RESTORE_REGS(clobbers);)
#define ENABLE_INTERRUPTS(clobbers) \
PARA_SITE(PARA_PATCH(pv_irq_ops, PV_IRQ_irq_enable), clobbers, \
- PV_SAVE_REGS; \
+ PV_SAVE_REGS(clobbers); \
call PARA_INDIRECT(pv_irq_ops+PV_IRQ_irq_enable); \
- PV_RESTORE_REGS;)
+ PV_RESTORE_REGS(clobbers);)
#define USERGS_SYSRET32
\
PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_usergs_sysret32), \
@@ -1604,11 +1630,15 @@
PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_swapgs), CLBR_NONE, \
swapgs)
+/*
+ * Note: swapgs is very special, and in practise is either going to be
+ * implemented with a single "swapgs" instruction or something very
+ * special. Either way, we don't need to save any registers for
+ * it.
+ */
#define SWAPGS \
PARA_SITE(PARA_PATCH(pv_cpu_ops, PV_CPU_swapgs), CLBR_NONE, \
- PV_SAVE_REGS; \
- call PARA_INDIRECT(pv_cpu_ops+PV_CPU_swapgs); \
- PV_RESTORE_REGS \
+ call PARA_INDIRECT(pv_cpu_ops+PV_CPU_swapgs) \
)
#define GET_CR2_INTO_RCX \
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |