[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

AW: [Xen-devel] Create a linux-2.6.18-xen.hg Kernel with CPU_FREQ support



Thanks, seems to work (still compiling). 

Xen cpufreq (so I learnt) only supports AMD CPUs from Family 10 on. Which 
excludes,
I guess, the majority of systems, although I have to admit that normal Xen 
usage is
not like mine for a home network.

For those cases, I have understood cpufreq=dom0-kernel being the standard, 
which 
includes the need to have the CPU_FREQ part enabled. 

I understand the problem and I am far from giving advice here, but from a user's
persepctive, it might not be necessary to implement code control of possible 
misuse, 
but maybe to control thru configuration what case your heading at. Or at least 
a small 
hint in the README would do... ;o).

I am anyhow in trouble, as pre-Fam10 AMD CPUs lacks P-State invariant TSCs, 
what is
causing other trouble.

Thanks,
Carsten.

----- Originalnachricht -----
Von: "Tian, Kevin" <kevin.tian@xxxxxxxxx>
Gesendet: Mit, 14.1.2009 03:07
An: 'Carsten Schiers' <carsten@xxxxxxxxxx> ; xen-devel 
<xen-devel@xxxxxxxxxxxxxxxxxxx>
Betreff: RE: [Xen-devel] Create a linux-2.6.18-xen.hg Kernel with CPU_FREQ 
support

>From: Carsten Schiers
>Sent: Wednesday, January 14, 2009 5:16 AM
>
>Excuse my missing knowledge, but how do I enable CPU_FREQ support when 
>building Xen 
>hypervisor and especially the kernel from sources? When doing e.g. a
>
>  hg clone http://xenbits.xensource.com/xen-unstable.hg
>  make world
>
>the resulting kernel will now create e.g. powernow-k8.ko. 
>
>When I do a
>
>  make linux-2.6-xen-prep
>  cd build-linux-2.6.18-xen_x86_64
>  make menuconfig
>
>all CPU_FREQ options are not accessable. 
>
>Thanks,
>Carsten.
>

It's intentional since Xen itself supports cpufreq now. To avoid 
dependency on dom0's CONFIG_CPU_FREQ and also intrusive 
checks on whether external control is enabled in every linux
cpufreq drivers, CPU_FREQ in dom0 is silented by default now.
It's not a neat approach, but makes sense since xen controlled
cpufreq is sure a better model. You can enable CPU_FREQ in
dom0 manually though, by removing below dependency.

(drivers/cpufreq/Kconfig)
 config CPU_FREQ
        bool "CPU Frequency scaling"
---->  depends on !PROCESSOR_EXTERNAL_CONTROL

However once that dependency is removed, there's no automatic
check to avoid confliction when dom0 and xen both want to
control freq change, and then you should keep an eye yourself.

One alternative to relax this limitation, is to move external control 
check up from drivers to cpufreq common layer. Just several lines 
change to block dom0 cpufreq when xen controlled method is 
activated, but one drawback is in architecture-neutral files. Comments?

Thanks,
Kevin

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.