|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] Re: pv_ops dom0 testing
Boris, It does support ahci, and it works with other kernels, the problem is that I am testing pvops dom0 kernel and it does not work with that. I included the same drivers I use successfully with other kernels, the problem is with the pvops dom0 kernel. Andy On 03/12/2008, Boris Derzhavets <bderzhavets@xxxxxxxxx> wrote: > > > --- On Wed, 12/3/08, Andrew Lyon <andrew.lyon@xxxxxxxxx> wrote: > From: Andrew Lyon <andrew.lyon@xxxxxxxxx> > Subject: Re: [Xen-devel] pv_ops dom0 testing > To: deshantm@xxxxxxxxx > Cc: "Jeremy Fitzhardinge" <jeremy@xxxxxxxx>, xen-devel@xxxxxxxxxxxxxxxxxxx > Date: Wednesday, December 3, 2008, 12:10 PM > > On Wed, Dec 3, 2008 at 4:43 PM, Todd Deshane <deshantm@xxxxxxxxx> wrote: >> >> >>> I had the system setup to output to serial and vga console >>> (console=vga,com1) but it seems that the vga console only displays Xen >>> debug messages, >> >> Here is my grub debug setup for reference >> >> title Xen 3.4-unstable DEBUG/ Ubuntu 8.10, kernel 2.6.28-rc6-tip >> root (hd0,0) >> kernel /boot/xen-3.4-unstable.gz loglvl=all guest_loglvl=all >> com1=115200,8n1 console=com1 mem=3G >> module /boot/vmlinuz-2.6.28-rc6-tip root=/dev/sda1 ro > console=hvc0 >> earlyprintk=xen xencons=ttyS0,115200 nousb >> module /boot/initrd.img-2.6.28-rc6-tip >> >> >>> >>> I hooked up a null modem cable and I've now captured >>> the full xen and linux dmesg, it appears that the onboard intel ahci >>> sata is not working so the kernel is unable to run init: >>> >>> __ __ _____ _____ ___ >>> >>> \ \/ /___ _ __ |___ / |___ / / _ \ >>> >>> \ // _ \ '_ \ |_ \ |_ \| | | | >>> >>> / \ __/ | | | ___) | ___) | |_| | >>> >>> /_/\_\___|_| |_| |____(_)____(_)___/ >>> >>> >>> >>> (XEN) Xen version 3.3.0 (root@(none)) (gcc version 4.1.2 (Gentoo 4.1.2 >>> p1.0.2)) Tue Dec 2 15:55:55 GMT 2008 >>> >>> (XEN) Latest ChangeSet: unavailable >>> >>> (XEN) Command line: com1=115200,8n1 console=vga,com1 >>> >>> (XEN) Video information: >>> >>> (XEN) VGA is text mode 80x25, font 8x16 >>> >>> (XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds >>> >>> (XEN) Disc information: >>> >>> (XEN) Found 1 MBR signatures >>> >>> (XEN) Found 1 EDD information structures >>> >>> (XEN) Xen-e820 RAM map: >>> >>> (XEN) 0000000000000000 - 000000000009ec00 (usable) >>> >>> (XEN) 00000000000f0000 - 0000000000100000 (reserved) >>> >>> (XEN) 0000000000100000 - 00000000cfdff800 (usable) >>> >>> (XEN) 00000000cfdff800 - 00000000cfe53c00 (ACPI NVS) >>> >>> (XEN) 00000000cfe53c00 - 00000000cfe55c00 (ACPI data) >>> >>> (XEN) 00000000cfe55c00 - 00000000d0000000 (reserved) >>> >>> (XEN) 00000000e0000000 - 00000000f0000000 (reserved) >>> >>> (XEN) 00000000fec00000 - 00000000fed00400 (reserved) >>> >>> (XEN) 00000000fed20000 - 00000000feda0000 (reserved) >>> >>> (XEN) 00000000fee00000 - 00000000fef00000 (reserved) >>> >>> (XEN) 00000000ffb00000 - 0000000100000000 (reserved) >>> >>> (XEN) 0000000100000000 - 0000000128000000 (usable) >>> >>> (XEN) System RAM: 3965MB (4060788kB) >>> >>> (XEN) ACPI: RSDP 000FEC00, 0024 (r2 DELL ) >>> >>> (XEN) ACPI: XSDT 000FC5B3, 008C (r1 DELL B9K 15 ASL >>> 61) >>> >>> (XEN) ACPI: FACP 000FC6E3, 00F4 (r3 DELL B9K 15 ASL >>> 61) >>> >>> (XEN) ACPI: DSDT FFF76B39, 4596 (r1 DELL dt_ex 1000 INTL >>> 20050624) >>> >>> (XEN) ACPI: FACS CFDFF800, 0040 >>> >>> (XEN) ACPI: SSDT FFF7B1EE, 00AA (r1 DELL st_ex 1000 INTL >>> 20050624) >>> >>> (XEN) ACPI: APIC 000FC7D7, 0092 (r1 DELL B9K 15 ASL >>> 61) >>> >>> (XEN) ACPI: BOOT 000FC869, 0028 (r1 DELL B9K 15 ASL >>> 61) >>> >>> (XEN) ACPI: ASF! 000FC891, 0096 (r32 DELL B9K 15 ASL >>> 61) >>> >>> (XEN) ACPI: MCFG 000FC927, 003E (r1 DELL B9K 15 ASL >>> 61) >>> >>> (XEN) ACPI: HPET 000FC965, 0038 (r1 DELL B9K 15 ASL >>> 61) >>> >>> (XEN) ACPI: TCPA 000FCBC1, 0032 (r1 DELL B9K 15 ASL >>> 61) >>> >>> (XEN) ACPI: DMAR 000FCBF3, 00D0 (r1 DELL B9K 15 ASL >>> 61) >>> >>> (XEN) ACPI: SLIC 000FC99D, 0176 (r1 DELL B9K 15 ASL >>> 61) >>> >>> (XEN) ACPI: SSDT CFDFF840, 01F9 (r1 DpgPmm Cpu0Ist 11 INTL >>> 20050624) >>> >>> (XEN) ACPI: SSDT CFDFFC49, 01F9 (r1 DpgPmm Cpu1Ist 11 INTL >>> 20050624) >>> >>> (XEN) ACPI: SSDT CFE00052, 0140 (r1 DpgPmm CpuPm 10 INTL >>> 20050624) >>> >>> (XEN) Xen heap: 14MB (14632kB) >>> >>> (XEN) Domain heap initialised >>> >>> (XEN) Processor #0 6:15 APIC version 20 >>> >>> (XEN) Processor #1 6:15 APIC version 20 >>> >>> (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 >>> >>> (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs >>> >>> (XEN) Using scheduler: SMP Credit Scheduler (credit) >>> >>> (XEN) Detected 2394.042 MHz processor. >>> >>> (XEN) HVM: VMX enabled >>> >>> (XEN) CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping > 06 >>> >>> (XEN) Booting processor 1/1 eip 8c000 >>> >>> (XEN) CPU1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping > 06 >>> >>> (XEN) Total of 2 processors activated. >>> >>> (XEN) ENABLING IO-APIC IRQs >>> >>> (XEN) -> Using new ACK method >>> >>> (XEN) checking TSC synchronization across 2 CPUs: passed. >>> >>> (XEN) Platform timer is 14.318MHz HPET >>> >>> (XEN) Brought up 2 CPUs >>> >>> (XEN) I/O virtualisation disabled >>> >>> (XEN) *** LOADING DOMAIN 0 *** >>> >>> (XEN) Xen kernel: 64-bit, lsb, compat32 >>> >>> (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x200000 -> 0x777e68 >>> >>> (XEN) PHYSICAL MEMORY ARRANGEMENT: >>> >>> (XEN) Dom0 alloc.: 0000000123000000->0000000124000000 (958126 > pages >>> to be allocated) >>> >>> (XEN) VIRTUAL MEMORY ARRANGEMENT: >>> >>> (XEN) Loaded kernel: ffffffff80200000->ffffffff80777e68 >>> >>> (XEN) Init. ramdisk: ffffffff80778000->ffffffff80778000 >>> >>> (XEN) Phys-Mach map: ffffffff80778000->ffffffff80ecf570 >>> >>> (XEN) Start info: ffffffff80ed0000->ffffffff80ed04a4 >>> >>> (XEN) Page tables: ffffffff80ed1000->ffffffff80edc000 >>> >>> (XEN) Boot stack: ffffffff80edc000->ffffffff80edd000 >>> >>> (XEN) TOTAL: ffffffff80000000->ffffffff81000000 >>> >>> (XEN) ENTRY ADDRESS: ffffffff8064f200 >>> >>> (XEN) Dom0 has maximum 2 VCPUs >>> >>> (XEN) Scrubbing Free RAM: .done. >>> >>> (XEN) Xen trace buffers: disabled >>> >>> (XEN) Std. Loglevel: Errors and warnings >>> >>> (XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings) >>> >>> (XEN) Xen is relinquishing VGA console. >>> >>> (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times > to switch >>> input to Xen) >>> >>> (XEN) Freed 108kB init memory. >>> >>> mapping kernel into physical memory >>> >>> Xen: setup ISA identity maps >>> >>> about to get started... >>> >>> PAT disabled on Xen >>> >>> Linux version 2.6.28-rc6-tip (root@optiplex755) (gcc version 4.1.2 >>> (Gentoo 4.1.2 p1.0.2)) #2 SMP Wed Dec 3 15:24:08 GMT 2008 >>> >>> Command line: root=/dev/sda2 console=hvc0 earlyprintk=xen >>> >>> KERNEL supported cpus: >>> >>> Intel GenuineIntel >>> >>> AMD AuthenticAMD >>> >>> Centaur CentaurHauls >>> >>> BIOS-provided physical RAM map: >>> >>> Xen: 0000000000000000 - 00000000000a0000 (usable) >>> >>> Xen: 00000000000a0000 - 0000000000100000 (reserved) >>> >>> Xen: 0000000000100000 - 0000000000778000 (usable) >>> >>> Xen: 0000000000778000 - 0000000000ed1000 (reserved) >>> >>> Xen: 0000000000ed1000 - 00000000eaeae000 (usable) >>> >>> console [xenboot0] enabled >>> >>> DMI 2.5 present. >>> >>> last_pfn = 0xeaeae max_arch_pfn = 0x3ffffffff >>> >>> init_memory_mapping: 0000000000000000-00000000eaeae000 >>> >>> last_map_addr: eaeae000 end: eaeae000 >>> >>> ACPI: RSDP 000FEC00, 0024 (r2 DELL ) >>> >>> ACPI: XSDT 000FC5B3, 008C (r1 DELL B9K 15 ASL 61) >>> >>> ACPI: FACP 000FC6E3, 00F4 (r3 DELL B9K 15 ASL 61) >>> >>> ACPI: DSDT FFF76B39, 4596 (r1 DELL dt_ex 1000 INTL 20050624) >>> >>> ACPI: FACS CFDFF800, 0040 >>> >>> ACPI: SSDT FFF7B1EE, 00AA (r1 DELL st_ex 1000 INTL 20050624) >>> >>> ACPI: APIC 000FC7D7, 0092 (r1 DELL B9K 15 ASL 61) >>> >>> ACPI: BOOT 000FC869, 0028 (r1 DELL B9K 15 ASL 61) >>> >>> ACPI: ASF! 000FC891, 0096 (r32 DELL B9K 15 ASL 61) >>> >>> ACPI: MCFG 000FC927, 003E (r1 DELL B9K 15 ASL 61) >>> >>> ACPI: HPET 000FC965, 0038 (r1 DELL B9K 15 ASL 61) >>> >>> ACPI: TCPA 000FCBC1, 0032 (r1 DELL B9K 15 ASL 61) >>> >>> ACPI: DMAR 000FCBF3, 00D0 (r1 DELL B9K 15 ASL 61) >>> >>> ACPI: SLIC 000FC99D, 0176 (r1 DELL B9K 15 ASL 61) >>> >>> ACPI: SSDT CFDFF840, 01F9 (r1 DpgPmm Cpu0Ist 11 INTL 20050624) >>> >>> ACPI: SSDT CFDFFC49, 01F9 (r1 DpgPmm Cpu1Ist 11 INTL 20050624) >>> >>> ACPI: SSDT CFE00052, 0140 (r1 DpgPmm CpuPm 10 INTL 20050624) >>> >>> ACPI: DMI detected: Dell OptiPlex 755 >>> >>> (5 early reservations) ==> bootmem [0000000000 - 00eaeae000] >>> >>> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - >>> 0000001000] >>> >>> #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - >>> 0000008000] >>> >>> #2 [0000ed1000 - 0000edc000] XEN PAGETABLES ==> [0000ed1000 - >>> 0000edc000] >>> >>> #3 [0000200000 - 0000777e68] TEXT DATA BSS ==> [0000200000 - >>> 0000777e68] >>> >>> #4 [0000edc000 - 000162b000] PGTABLE ==> [0000edc000 - >>> 000162b000] >>> >>> found SMP MP-table at [ffff8800000fe710] 000fe710 >>> >>> Zone PFN ranges: >>> >>> DMA 0x00000000 -> 0x00001000 >>> >>> DMA32 0x00001000 -> 0x00100000 >>> >>> Normal 0x00100000 -> 0x00100000 >>> >>> Movable zone start PFN for each node >>> >>> early_node_map[3] active PFN ranges >>> >>> 0: 0x00000000 -> 0x000000a0 >>> >>> 0: 0x00000100 -> 0x00000778 >>> >>> 0: 0x00000ed1 -> 0x000eaeae >>> >>> ACPI: PM-Timer IO Port: 0x808 >>> >>> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) >>> >>> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) >>> >>> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled) >>> >>> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled) >>> >>> ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) >>> >>> ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled) >>> >>> ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled) >>> >>> ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled) >>> >>> ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) >>> >>> ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) >>> >>> IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23 >>> >>> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) >>> >>> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) >>> >>> ACPI: HPET id: 0x8086a301 base: 0xfed00000 >>> >>> Using ACPI (MADT) for SMP configuration information >>> >>> SMP: Allowing 2 CPUs, 0 hotplug CPUs >>> >>> (XEN) ioapic_guest_write: apic=0, pin=2, old_irq=0, new_irq=-1 >>> >>> (XEN) ioapic_guest_write: old_entry=000009f0, new_entry=00010900 >>> >>> (XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ! >>> >>> (XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=-1 >>> >>> (XEN) ioapic_guest_write: old_entry=000009f1, new_entry=00010900 >>> >>> (XEN) ioapic_guest_write: Attempt to remove IO-APIC pin of in-use IRQ! >>> >>> Allocating PCI resources starting at ec000000 (gap: eaeae000:15152000) >>> >>> PERCPU: Allocating 57344 bytes of per cpu data >>> >>> Built 1 zonelists in Zone order, mobility grouping on. Total pages: >>> 945674 >>> >>> Kernel command line: root=/dev/sda2 console=hvc0 earlyprintk=xen >>> >>> Initializing CPU#0 >>> >>> xen: allocated irq 9 for acpi 9 >>> >>> PID hash table entries: 4096 (order: 12, 32768 bytes) >>> >>> Detected 2394.042 MHz processor. >>> >>> Console: colour dummy device 80x25 >>> >>> console handover: boot [xenboot0] -> real [hvc0] >>> >>> Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) >>> >>> Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) >>> >>> Checking aperture... >>> >>> No AGP bridge found >>> >>> PCI-DMA: Using software bounce buffering for IO (SWIOTLB) >>> >>> Placing software IO TLB between 0x51ca000 - 0x91ca000 >>> >>> Memory: 3701108k/3848888k available (2519k kernel code, 7908k absent, >>> 139388k reserved, 1546k data, 420k init) >>> >>> installing Xen timer for CPU 0 >>> >>> Calibrating delay loop (skipped), value calculated using timer >>> frequency.. 4788.08 BogoMIPS (lpj=9576168) >>> >>> Mount-cache hash table entries: 256 >>> >>> CPU: L1 I cache: 32K, L1 D cache: 32K >>> >>> CPU: L2 cache: 4096K >>> >>> CPU: Physical Processor ID: 0 >>> >>> CPU: Processor Core ID: 0 >>> >>> SMP alternatives: switching to UP code >>> >>> ACPI: Core revision 20080926 >>> >>> cpu 0 spinlock event irq 17 >>> >>> installing Xen timer for CPU 1 >>> >>> cpu 1 spinlock event irq 23 >>> >>> SMP alternatives: switching to SMP code >>> >>> Initializing CPU#1 >>> >>> CPU: L1 I cache: 32K, L1 D cache: 32K >>> >>> CPU: L2 cache: 4096K >>> >>> CPU: Physical Processor ID: 0 >>> >>> CPU: Processor Core ID: 0 >>> >>> Brought up 2 CPUs >>> >>> net_namespace: 552 bytes >>> >>> Booting paravirtualized kernel on Xen >>> >>> Xen version: 3.3.0 (preserve-AD) (dom0) >>> >>> Grant table initialized >>> >>> NET: Registered protocol family 16 >>> >>> xenbus_probe_init ok >>> >>> ACPI FADT declares the system doesn't support PCIe ASPM, so > disable it >>> >>> ACPI: bus type pci registered >>> >>> PCI: Using configuration type 1 for base access >>> >>> ACPI: Interpreter enabled >>> >>> ACPI: (supports S0 S5) >>> >>> ACPI: Using IOAPIC for interrupt routing >>> >>> ACPI: ACPI Dock Station Driver: 1 docks/bays found >>> >>> ACPI: PCI Root Bridge [PCI0] (0000:00) >>> >>> pci 0000:00:01.0: PME# supported from D0 D3hot D3cold >>> >>> pci 0000:00:01.0: PME# disabled >>> >>> pci 0000:00:03.0: PME# supported from D0 D3hot D3cold >>> >>> pci 0000:00:03.0: PME# disabled >>> >>> pci 0000:00:19.0: PME# supported from D0 D3hot D3cold >>> >>> pci 0000:00:19.0: PME# disabled >>> >>> pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold >>> >>> pci 0000:00:1a.7: PME# disabled >>> >>> pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold >>> >>> pci 0000:00:1b.0: PME# disabled >>> >>> pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold >>> >>> pci 0000:00:1c.0: PME# disabled >>> >>> pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold >>> >>> pci 0000:00:1d.7: PME# disabled >>> >>> pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 > ACPI/GPIO/TCO >>> >>> pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO >>> >>> pci 0000:00:1f.2: PME# supported from D3hot >>> >>> pci 0000:00:1f.2: PME# disabled >>> >>> pci 0000:00:1e.0: transparent bridge >>> >>> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) >>> >>> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15) >>> >>> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15) >>> >>> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15) >>> >>> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, >>> disabled. >>> >>> ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 15) >>> >>> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15) >>> >>> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15) >>> >>> ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA] - 00, >>> should be 87 [20080926] >>> >>> xen_balloon: Initialising balloon driver. >>> >>> SCSI subsystem initialized >>> >>> PCI: Using ACPI for IRQ routing >>> >>> pci 0000:00:01.0: BAR 9: can't allocate resource >>> >>> pci 0000:01:00.0: BAR 0: can't allocate resource >>> >>> Xen: Initializing Xen DMA ops >>> >>> Xen: Enabling DMA fallback to swiotlb >>> >>> PCI-GART: No AMD GART found. >>> >>> pnp: PnP ACPI init >>> >>> ACPI: bus type pnp registered >>> >>> pnp 00:01: io resource (0x800-0x85f) overlaps 0000:00:1f.0 BAR 7 >>> (0x800-0x87f), disabling >>> >>> pnp 00:01: io resource (0x860-0x8ff) overlaps 0000:00:1f.0 BAR 7 >>> (0x800-0x87f), disabling >>> >>> system 00:01: ioport range 0xc00-0xc7f has been reserved >>> >>> xen_set_ioapic_routing: irq 13 gsi 13 vector 120 ioapic 0 pin 13 >>> triggering 1 polarity 0 >>> >>> xen_set_ioapic_routing: irq 8 gsi 8 vector 80 ioapic 0 pin 8 >>> triggering 1 polarity 0 >>> >>> xen_set_ioapic_routing: irq 7 gsi 7 vector 72 ioapic 0 pin 7 >>> triggering 1 polarity 0 >>> >>> xen_set_ioapic_routing: irq 4 gsi 4 vector 241 ioapic 0 pin 4 >>> triggering 1 polarity 0 >>> >>> (XEN) ioapic_guest_write: apic=0, pin=4, old_irq=4, new_irq=4 >>> >>> (XEN) ioapic_guest_write: old_entry=000009f1, new_entry=000189f1 >>> >>> (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use > IRQ! >>> >>> pnp: PnP ACPI: found 9 devices >>> >>> ACPI: ACPI bus type pnp unregistered >>> >>> pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 >>> >>> pci 0000:00:01.0: IO window: 0xd000-0xdfff >>> >>> pci 0000:00:01.0: MEM window: 0xfe900000-0xfeafffff >>> >>> pci 0000:00:01.0: PREFETCH window: 0x00000100000000-0x0000010fffffff >>> >>> pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 >>> >>> pci 0000:00:1c.0: IO window: disabled >>> >>> pci 0000:00:1c.0: MEM window: 0xfe800000-0xfe8fffff >>> >>> pci 0000:00:1c.0: PREFETCH window: disabled >>> >>> pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 >>> >>> pci 0000:00:1e.0: IO window: disabled >>> >>> pci 0000:00:1e.0: MEM window: disabled >>> >>> pci 0000:00:1e.0: PREFETCH window: disabled >>> >>> xen_set_ioapic_routing: irq 29 gsi 16 vector 152 ioapic 0 pin 16 >>> triggering 0 polarity 1 >>> >>> pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 29 >>> >>> xen: PCI device 0000:00:01.0 pin 1 -> irq 29 >>> >>> xen_allocate_pirq: returning irq 29 for gsi 16 >>> >>> xen_set_ioapic_routing: irq 29 gsi 16 vector 152 ioapic 0 pin 16 >>> triggering 0 polarity 1 >>> >>> pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 29 >>> >>> xen: PCI device 0000:00:1c.0 pin 1 -> irq 29 >>> >>> bus: 00 index 0 io port: [0x00-0xffff] >>> >>> bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] >>> >>> bus: 01 index 0 io port: [0xd000-0xdfff] >>> >>> bus: 01 index 1 mmio: [0xfe900000-0xfeafffff] >>> >>> bus: 01 index 2 mmio: [0x100000000-0x10fffffff] >>> >>> bus: 01 index 3 mmio: [0x0-0x0] >>> >>> bus: 02 index 0 mmio: [0x0-0x0] >>> >>> bus: 02 index 1 mmio: [0xfe800000-0xfe8fffff] >>> >>> bus: 02 index 2 mmio: [0x0-0x0] >>> >>> bus: 02 index 3 mmio: [0x0-0x0] >>> >>> bus: 03 index 0 mmio: [0x0-0x0] >>> >>> bus: 03 index 1 mmio: [0x0-0x0] >>> >>> bus: 03 index 2 mmio: [0x0-0x0] >>> >>> bus: 03 index 3 io port: [0x00-0xffff] >>> >>> bus: 03 index 4 mmio: [0x000000-0xffffffffffffffff] >>> >>> NET: Registered protocol family 2 >>> >>> IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) >>> >>> TCP established hash table entries: 262144 (order: 10, 4194304 bytes) >>> >>> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) >>> >>> TCP: Hash tables configured (established 262144 bind 65536) >>> >>> TCP reno registered >>> >>> NET: Registered protocol family 1 >>> >>> Simple Boot Flag at 0x7a set to 0x1 >>> >>> Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). >>> >>> msgmni has been set to 7517 >>> >>> io scheduler noop registered >>> >>> io scheduler cfq registered (default) >>> >>> pcieport-driver 0000:00:01.0: found MSI capability >>> >>> pcieport-driver 0000:00:1c.0: found MSI capability >>> >>> input: Power Button (FF) as /class/input/input0 >>> >>> ACPI: Power Button (FF) [PWRF] >>> >>> input: Power Button (CM) as /class/input/input1 >>> >>> ACPI: Power Button (CM) [VBTN] >>> >>> xenbus_probe_backend_init bus registered ok >>> >>> xenbus_probe_frontend_init bus registered ok >>> >>> Event-channel device installed. >>> >>> ***blkif_init >>> >>> Real Time Clock Driver v1.12ac >>> >>> Linux agpgart interface v0.103 >>> >>> floppy0: Unable to grab IRQ6 for the floppy driver >>> >>> brd: module loaded >>> >>> loop: module loaded >>> >>> tun: Universal TUN/TAP device driver, 1.6 >>> >>> tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> >>> >>> console [netcon0] enabled >>> >>> netconsole: network logging started >>> >>> Driver 'sd' needs updating - please use bus_type methods >>> >>> Driver 'sr' needs updating - please use bus_type methods >>> >>> xen_set_ioapic_routing: irq 31 gsi 18 vector 160 ioapic 0 pin 18 >>> triggering 0 polarity 1 >>> >>> ahci 0000:00:1f.2: PCI INT C -> GSI 18 (level, low) -> IRQ 31 >>> >>> xen: PCI device 0000:00:1f.2 pin 3 -> irq 31 >>> >>> ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x27 impl > SATA >>> mode >>> >>> ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pmp pio slum part > ems >>> >>> (XEN) unexpected IRQ trap at vector 59 >>> >>> (XEN) unexpected IRQ trap at vector 59 >>> >>> scsi0 : ahci >>> >>> scsi1 : ahci >>> >>> scsi2 : ahci >>> >>> scsi3 : ahci >>> >>> scsi4 : ahci >>> >>> scsi5 : ahci >>> >>> ata1: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970100 irq 1277 >>> >>> ata2: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970180 irq 1277 >>> >>> ata3: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970200 irq 1277 >>> >>> ata4: DUMMY >>> >>> ata5: DUMMY >>> >>> ata6: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq 1277 >>> >>> (XEN) unexpected IRQ trap at vector 59 >>> >>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >>> >>> (XEN) unexpected IRQ trap at vector 59 >>> >>> ata1.00: qc timeout (cmd 0xec) >>> >>> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) >>> >>> (XEN) unexpected IRQ trap at vector 59 >>> >>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >>> >>> (XEN) unexpected IRQ trap at vector 59 >>> >>> ata1.00: qc timeout (cmd 0xec) >>> >>> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) >>> >>> (XEN) unexpected IRQ trap at vector 59 >>> >>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >>> >>> (XEN) unexpected IRQ trap at vector 59 >>> >>> ata1.00: qc timeout (cmd 0xec) >>> >>> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4) >>> >>> (XEN) unexpected IRQ trap at vector 59 >>> >>> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >>> >>> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >>> >>> (XEN) unexpected IRQ trap at vector 59 >>> >>> ata2.00: qc timeout (cmd 0xa1) >>> >>> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) >>> >>> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >>> >>> (XEN) unexpected IRQ trap at vector 59 >>> >>> ata2.00: qc timeout (cmd 0xa1) >>> >>> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) >>> >>> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >>> >>> (XEN) unexpected IRQ trap at vector 59 >>> >>> ata2.00: qc timeout (cmd 0xa1) >>> >>> ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) >>> >>> ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >>> >>> ata3: SATA link down (SStatus 4 SControl 300) >>> >>> ata6: SATA link down (SStatus 4 SControl 300) >>> >>> PNP: No PS/2 controller found. Probing ports directly. >>> >>> i8042: probe of i8042 failed with error -38 >>> >>> mice: PS/2 mouse device common for all mice >>> >>> device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: >>> dm-devel@xxxxxxxxxx >>> >>> cpuidle: using governor ladder >>> >>> TCP cubic registered >>> >>> NET: Registered protocol family 17 >>> >>> RPC: Registered udp transport module. >>> >>> RPC: Registered tcp transport module. >>> >>> IO APIC resources could be not be allocated. >>> >>> Root-NFS: No NFS server available, giving up. >>> >>> VFS: Unable to mount root fs via NFS, trying floppy. >>> >>> VFS: Insert root floppy and press ENTER >>> >>> Andy >> >> Looks like it is not detecting the drive correctly. >> >> What is your specific controller? > > The system is a Dell Optiplex 755 with Intel onboard sata, I'm having > trouble finding the controller model and lspci only shows that it is > AHCI: > ********************************************************************* > When i open the box i can see the spec on South Bridge Chipset > and check with manual. Then enter setup and turn on AHCI, reboot > and load F8 for instance ( or just resque disk with 2.6.21 kernel) > to make sure Linux kernel loads AHCI driver to detect SATA HDD > Kernel 2.6.18 and above does detect AHCI mode on Intel's ICH(7,8,9)R, > but not ICH(6,7,8.9) per Intel Storage Matrix this ones don't support > AHCI. > ********************************************************************* > > 00:1f.2 SATA controller: Intel Corporation 6 port SATA AHCI Controller (rev > 02) > > It is my Xen test server and has been running gentoo linux with both > vanilla kernel 2.6.27 (no xen) and 2.6.27+opensuse xen dom0 patches, I > wanted to start my pv_ops dom0 testing with a machine that I know can > run Xen successfully. > > The HD is a Toshiba 2.5" drive as that is all I had to hand when I > installed Gentoo Linux onto this machine, do you think its worth > swapping that for a 3.5"? I've got a raptor lying around somwhere... > > Andy > > > >> >> Cheers, >> Todd >> >> -- >> Todd Deshane >> http://todddeshane.net >> http://runningxen.com >> > > _______________________________________________ > Xen-devel mailing list > Xen-devel@xxxxxxxxxxxxxxxxxxx > http://lists.xensource.com/xen-devel > > > > -- Sent from my mobile device _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |