spawn xm console vtp3_1162429081 Linux version 2.6.16 (root@vt-gs7) (gcc version 3.4.5 20051201 (Red Hat 3.4.5-2)) #1 SMP Mon Sep 11 15:11:29 CST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000a0000 - 00000000000c0000 type 16 BIOS-e820: 00000000000ea000 - 00000000000eb000 (ACPI data) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fffd000 (usable) BIOS-e820: 000000001fffd000 - 000000001fffe000 type 19 BIOS-e820: 000000001fffe000 - 000000001ffff000 type 18 BIOS-e820: 000000001ffff000 - 0000000020000000 type 17 BIOS-e820: 00000000fec00000 - 0000000100000000 type 16 0MB HIGHMEM available. 511MB LOWMEM available. found SMP MP-table at 000fcd10 DMI 2.4 present. ACPI: PM-Timer IO Port: 0xc018 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) Processor #2 6:15 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) Processor #3 6:15 APIC version 20 ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 0 already used, trying 4 IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23 Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000) Built 1 zonelists Kernel command line: ro root=/dev/hda1 rhgb console=ttyS0 com1=115200,8n1 console=tty0 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 2400.167 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 2UG: soft lockup detected on CPU#0! Pid: 0, comm: swapper EIP: 0060:[] CPU: 0 EIP is at __do_softirq+0x64/0x100 EFLAGS: 00000282 Not tainted (2.6.16 #1) EAX: c1404220 EBX: 00000002 ECX: 00e38f60 EDX: 00000000 ESI: c0563f40 EDI: c05db4df EBP: c056be88 DS: 007b ES: 007b CR0: 8005003b CR2: 00000000 CR3: 005cf000 CR4: 000006d0 [] show_trace+0x21/0x30 [] show_regs+0x16a/0x194 [] softlockup_tick+0x81/0x90 [] do_timer+0x3f/0xd0 [] timer_interrupt+0x33/0xc0 [] handle_IRQ_event+0x3e/0x90 [] __do_IRQ+0x89/0x100 [] do_IRQ+0x1c/0x30 [] common_interrupt+0x1a/0x20 [] do_softirq+0x38/0x40 [] irq_exit+0x3a/0x50 [] do_IRQ+0x21/0x30 [] common_interrupt+0x1a/0x20 [] vprintk+0x1b2/0x290 [] printk+0x18/0x20 [] alloc_large_system_hash+0x162/0x200 [] inode_init_early+0x67/0xb0 [] vfs_caches_init_early+0xd/0x10 [] start_kernel+0x125/0x1f0 [] 0xc0100210 BUG: soft lockup detected on CPU#0! Pid: 0, comm: swapper EIP: 0060:[] CPU: 0 EIP is at __do_softirq+0x64/0x100 EFLAGS: 00000282 Not tainted (2.6.16 #1) EAX: c1404220 EBX: 00000002 ECX: 00e38f60 EDX: 00000000 ESI: c0563f40 EDI: c05db4df EBP: c056be88 DS: 007b ES: 007b CR0: 8005003b CR2: 00000000 CR3: 005cf000 CR4: 000006d0 [] show_trace+0x21/0x30 [] show_regs+0x16a/0x194 [] softlockup_tick+0x81/0x90 [] do_timer+0x3f/0xd0 [] timer_interrupt+0x33/0xc0 [] handle_IRQ_event+0x3e/0x90 [] __do_IRQ+0x89/0x100 [] do_IRQ+0x1c/0x30 [] common_interrupt+0x1a/0x20 [] do_softirq+0x38/0x40 [] irq_exit+0x3a/0x50 [] do_IRQ+0x21/0x30 [] common_interrupt+0x1a/0x20 [] vprintk+0x1b2/0x290 [] printk+0x18/0x20 [] alloc_large_system_hash+0x162/0x200 [] inode_init_early+0x67/0xb0 [] vfs_caches_init_early+0xd/0x10 [] start_kernel+0x125/0x1f0 [] 0xc0100210 Memory: 513340k/524276k available (3429k kernel code, 10356k reserved, 1083k data, 396k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 4812.24 BogoMIPS (lpj=24061203) Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: L3 cache: 4096K Checking 'hlt' instruction... OK. CPU0: Intel(R) Pentium(R) D CPU 000 @ 2.40GHz stepping 01 Booting processor 1/1 eip 2000 Initializing CPU#1 Calibrating delay using timer specific routine.. 4800.31 BogoMIPS (lpj=24001596) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: L3 cache: 4096K CPU1: Intel(R) Pentium(R) D CPU 000 @ 2.40GHz stepping 01 Booting processor 2/2 eip 2000 Initializing CPU#2 Calibrating delay using timer specific routine.. 3202.75 BogoMIPS (lpj=16013784) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: L3 cache: 4096K CPU2: Intel(R) Pentium(R) D CPU 000 @ 2.40GHz stepping 01 Booting processor 3/3 eip 2000 Initializing CPU#3 Calibrating delay using timer specific routine.. 4339.23 BogoMIPS (lpj=21696174) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: L3 cache: 4096K CPU3: Intel(R) Pentium(R) D CPU 000 @ 2.40GHz stepping 01 Total of 4 processors activated (17154.55 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1 checking TSC synchronization across 4 CPUs: CPU#0 had 0 usecs TSC skew, fixed it up. CPU#1 had 0 usecs TSC skew, fixed it up. CPU#2 had 0 usecs TSC skew, fixed it up. CPU#3 had 0 usecs TSC skew, fixed it up. Brought up 4 CPUs migration_cost=10000 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf9ed0, last bus=0 PCI: Using configuration type 1 ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0 Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 11 devices SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 IA-32 Microcode Update Driver: v1.14 Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered PCI: PIIX3: Enabling Passive Release on 0000:00:01.0 Limiting direct PCI/PCI transfers. Activating ISA DMA hang workarounds. PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 0) is a 16450 serial8250: ttyS0 at I/O 0x3f8 (irq = 0) is a 16450 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16450 FDC 0 is a S82078B RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) HP CISS Driver (v 2.6.10) Intel(R) PRO/1000 Network Driver - version 6.3.9-k4 Copyright (c) 1999-2005 Intel Corporation. pcnet32.c:v1.31c 01.Nov.2005 tsbogend@xxxxxxxxxxxxxxxx e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 11 (level, low) -> IRQ 11 eth0: RTL-8139C+ at 0xe081a000, 00:16:3e:35:d4:13, IRQ 11 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX3: IDE controller at PCI slot 0000:00:01.1 PIIX3: chipset revision 0 PIIX3: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:pio, hdd:pio hda: QEMU HARDDISK, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: QEMU CD-ROM, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 512KiB hda: 776192 sectors (397 MB) w/256KiB Cache, CHS=770/255/63, (U)DMA hda: set_multmode: status=0x41 { DriveReady Error } hda: set_multmode: error=0x04 { DriveStatusError } ide: failed opcode was: 0xef hda: cache flushes supported hda: hda1 hdc: ATAPI 4X CD-ROM drive, 512kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 Adaptec aacraid driver (1.1-4 Sep 11 2006 15:09:21) 3ware Storage Controller device driver for Linux v1.26.02.001. Fusion MPT base driver 3.03.07 Copyright (c) 1999-2005 LSI Logic Corporation Fusion MPT SPI Host driver 3.03.07 usbmon: debugfs is not available USB Universal Host Controller Interface driver v2.3 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver mice: PS/2 mouse device common for all mice md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 raid5: automatically using best checksumming function: pIII_sse input: AT Translated Set 2 keyboard as /class/input/input0 pIII_sse : 6976.800 MB/sec raid5: using function: pIII_sse (6976.800 MB/sec) md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@xxxxxxxxxx NET: Registered protocol family 2 IP route cache hash table entries: 8192 (order: 3, 32768 bytes) TCP established hash table entries: 32768 (order: 6, 262144 bytes) TCP bind hash table entries: 32768 (order: 6, 262144 bytes) TCP: Hash tables configured (established 32768 bind 32768) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 input: ImExPS/2 Generic Explorer Mouse as /class/input/input1 Bridge firewalling registered Starting balanced_irq Using IPI Shortcut mode md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 396k freed AT ATI9 AT Red Hat Enterprise Linux AS release 4 (Nahant Update 1) Kernel 2.6.16 on an i686 vtsmp-gs11 login: root Password: Last login:console opened Mon Oct 9 07:56:06 on tty1