|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] Time stopped
I am seeing the problem on another xSeries 335, FC4, 2GB RAM, both PAE enabled, changet 7353:29db5bded574. This other machine, however, does not show a trace, so the time and the "Domain 63 (vcpu#0) crashed on cpu#3:" issues may be different problems. Bug reports: 265 2005-09-28 dbarrera@xxxxxxxxxx Time stood still 267 2005-09-29 dbarrera@xxxxxxxxxx (XEN) Domain 2 (vcpu#0) crashed on cpu#3: On Thu, 2005-10-13 at 10:17 -0500, David F Barrera wrote: > I continue to encounter this problem daily on an IBM xSeries 335 SLES 9 > SP2, 4GB RAM machine while running XM-TEST. The time has not actually > stopped, but moves forward at an exceedingly slow pace. The 'date' > command will actually show that a second has transpired in the period > of, say, 10 actual minutes (or more). 'xm dmesg' is showing a trace. > > x335b:~ # xm list > Name ID Mem(MiB) CPU VCPUs State Time(s) > Domain-0 0 495 0 1 r----- 110.9 > 11_create_0 131 16 3 1 -b---- 0.3 > x335b:~ # date > Thu Oct 13 09:52:23 CDT 2005 > x335b:~ # date > Thu Oct 13 09:52:23 CDT 2005 > x335b:~ # date > Thu Oct 13 09:52:23 CDT 2005 > x335b:~ # xm list > Name ID Mem(MiB) CPU VCPUs State Time(s) > Domain-0 0 495 0 1 r----- 110.9 > 11_create_0 131 16 3 1 -b---- 0.3 > x335b:~ # date > Thu Oct 13 09:52:24 CDT 2005 > x335b:~ # date > Thu Oct 13 09:52:24 CDT 2005 > > x335b:~ # xm dmesg > __ __ _____ ___ _ _ > \ \/ /___ _ __ |___ / / _ \ __| | _____ _____| | > \ // _ \ '_ \ |_ \| | | |__ / _` |/ _ \ \ / / _ \ | > / \ __/ | | | ___) | |_| |__| (_| | __/\ V / __/ | > /_/\_\___|_| |_| |____(_)___/ \__,_|\___| \_/ \___|_| > > http://www.cl.cam.ac.uk/netos/xen > University of Cambridge Computer Laboratory > > Xen version 3.0-devel (root@xxxxxxxxxxxxxxxxxx) (gcc version 3.3.3 > (SuSE Linux)) Thu Oct 13 06:30:24 CDT 2005 > Latest ChangeSet: Wed Oct 12 10:15:02 2005 +0100 7353:29db5bded574 > > (XEN) Physical RAM map: > (XEN) 0000000000000000 - 000000000009d400 (usable) > (XEN) 000000000009d400 - 00000000000a0000 (reserved) > (XEN) 00000000000e0000 - 0000000000100000 (reserved) > (XEN) 0000000000100000 - 00000000f7fec140 (usable) > (XEN) 00000000f7fec140 - 00000000f7ff0000 (ACPI data) > (XEN) 00000000f7ff0000 - 00000000f8000000 (reserved) > (XEN) 00000000fec00000 - 0000000100000000 (reserved) > (XEN) 0000000100000000 - 0000000108000000 (usable) > (XEN) System RAM: 4095MB (4193828kB) > (XEN) Xen heap: 10MB (10496kB) > (XEN) PAE enabled, limit: 16 GB > (XEN) found SMP MP-table at 0009d540 > (XEN) DMI 2.3 present. > (XEN) Using APIC driver default > (XEN) ACPI: RSDP (v000 IBM ) @ > 0x000fdfc0 > (XEN) ACPI: RSDT (v001 IBM SERONYXP 0x00001000 IBM 0x45444f43) @ > 0xf7feff80 > (XEN) ACPI: FADT (v001 IBM SERONYXP 0x00001000 IBM 0x45444f43) @ > 0xf7feff00 > (XEN) ACPI: MADT (v001 IBM SERONYXP 0x00001000 IBM 0x45444f43) @ > 0xf7fefe40 > (XEN) ACPI: ASF! (v016 IBM SERONYXP 0x00000001 IBM 0x45444f43) @ > 0xf7fefd80 > (XEN) ACPI: DSDT (v001 IBM SERTURQU 0x00001000 MSFT 0x0100000b) @ > 0x00000000 > (XEN) ACPI: Local APIC address 0xfee00000 > (XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > (XEN) Processor #0 15:2 APIC version 20 > (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled) > (XEN) Processor #6 15:2 APIC version 20 > (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > (XEN) Processor #1 15:2 APIC version 20 > (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled) > (XEN) Processor #7 15:2 APIC version 20 > (XEN) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) > (XEN) ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) > (XEN) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) > (XEN) ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) > (XEN) ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0]) > (XEN) IOAPIC[0]: apic_id 14, version 17, address 0xfec00000, GSI 0-15 > (XEN) ACPI: IOAPIC (id[0x0d] address[0xfec01000] gsi_base[16]) > (XEN) IOAPIC[1]: apic_id 13, version 17, address 0xfec01000, GSI 16-31 > (XEN) ACPI: IOAPIC (id[0x0c] address[0xfec02000] gsi_base[32]) > (XEN) IOAPIC[2]: apic_id 12, version 17, address 0xfec02000, GSI 32-47 > (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > (XEN) ACPI: IRQ0 used by override. > (XEN) ACPI: IRQ2 used by override. > (XEN) Enabling APIC mode: Flat. Using 3 I/O APICs > (XEN) Using ACPI (MADT) for SMP configuration information > (XEN) Initializing CPU#0 > (XEN) Detected 3189.471 MHz processor. > (XEN) Using scheduler: Simple EDF Scheduler (sedf) > (XEN) CPU: Trace cache: 12K uops, L1 D cache: 8K > (XEN) CPU: L2 cache: 512K > (XEN) CPU: L3 cache: 1024K > (XEN) CPU: Physical Processor ID: 0 > (XEN) CPU0: Intel(R) Xeon(TM) CPU 3.20GHz stepping 05 > (XEN) Booting processor 1/1 eip 90000 > (XEN) Initializing CPU#1 > (XEN) CPU: Trace cache: 12K uops, L1 D cache: 8K > (XEN) CPU: L2 cache: 512K > (XEN) CPU: L3 cache: 1024K > (XEN) CPU: Physical Processor ID: 0 > (XEN) CPU1: Intel(R) Xeon(TM) CPU 3.20GHz stepping 05 > (XEN) Booting processor 2/6 eip 90000 > (XEN) Initializing CPU#2 > (XEN) CPU: Trace cache: 12K uops, L1 D cache: 8K > (XEN) CPU: L2 cache: 512K > (XEN) CPU: L3 cache: 1024K > (XEN) CPU: Physical Processor ID: 3 > (XEN) CPU2: Intel(R) Xeon(TM) CPU 3.20GHz stepping 05 > (XEN) Booting processor 3/7 eip 90000 > (XEN) Initializing CPU#3 > (XEN) CPU: Trace cache: 12K uops, L1 D cache: 8K > (XEN) CPU: L2 cache: 512K > (XEN) CPU: L3 cache: 1024K > (XEN) CPU: Physical Processor ID: 3 > (XEN) CPU3: Intel(R) Xeon(TM) CPU 3.20GHz stepping 05 > (XEN) Total of 4 processors activated. > (XEN) ENABLING IO-APIC IRQs > (XEN) ..TIMER: vector=0x31 pin1=2 pin2=-1 > (XEN) checking TSC synchronization across 4 CPUs: passed. > (XEN) Platform timer is 1.193MHz PIT > (XEN) Brought up 4 CPUs > (XEN) mtrr: v2.0 (20020519) > (XEN) *** LOADING DOMAIN 0 *** > (XEN) Xen-ELF header found: > 'GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=3.0,VIRT_BASE=0xC0000000,PAE=yes,LOADER=generic' > (XEN) PHYSICAL MEMORY ARRANGEMENT: > (XEN) Dom0 alloc.: 0000000003800000->0000000004000000 (125952 pages > to be allocated) > (XEN) VIRTUAL MEMORY ARRANGEMENT: > (XEN) Loaded kernel: c0100000->c06394e4 > (XEN) Init. ramdisk: c063a000->c063a000 > (XEN) Phys-Mach map: c063a000->c06b7000 > (XEN) Start info: c06b7000->c06b8000 > (XEN) Page tables: c06b8000->c06c1000 > (XEN) Boot stack: c06c1000->c06c2000 > (XEN) TOTAL: c0000000->c0800000 > (XEN) ENTRY ADDRESS: c0100000 > (XEN) Scrubbing Free > RAM: ...........................................done. > (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch > input to Xen). > (XEN) microcode: CPU1 updated from revision 0x11 to 0x29, date = > 08112004 > (XEN) microcode: CPU2 updated from revision 0x11 to 0x29, date = > 08112004 > (XEN) microcode: CPU3 updated from revision 0x11 to 0x29, date = > 08112004 > (XEN) microcode: CPU0 updated from revision 0x11 to 0x29, date = > 08112004 > (XEN) mtrr: type mismatch for fd000000,800000 old: write-back new: > write-combining > (XEN) mtrr: type mismatch for fd000000,800000 old: write-back new: > write-combining > (XEN) Domain 63 (vcpu#0) crashed on cpu#3: > (XEN) CPU: 3 > (XEN) EIP: e019:[<c01159b6>] > (XEN) EFLAGS: 00000246 CONTEXT: guest > (XEN) eax: 00000ac8 ebx: 00000000 ecx: 00000000 edx: 00000000 > (XEN) esi: 00000000 edi: 00000000 ebp: 00000ac8 esp: c0355e8c > (XEN) cr0: 8005003b cr3: e3b58000 > (XEN) ds: e021 es: e021 fs: 0000 gs: e021 ss: e021 cs: e019 > (XEN) Guest stack trace from esp=c0355e8c: > (XEN) c0000acc 00000003 c01159b6 0001e019 00010246 00000000 00000000 > 00000000 > (XEN) c0000000 c0361875 c1959000 00001000 00000000 00000000 c022b738 > c037ed20 > (XEN) 00000000 c0800000 c073e020 00000800 c0361bef c073e020 00000400 > c02f0a33 > (XEN) c0355f60 00004000 00000000 00000000 00000000 00000000 00004000 > 00000000 > (XEN) 00000004 00000003 c073d018 00000000 c073d000 00000000 00000000 > c0362025 > (XEN) c073d000 00000000 c0364880 c0385ff0 c0353060 c02c7c37 00000000 > c03622f8 > (XEN) 006447ff c02f0a33 c0353060 c035d1e5 c02f0a33 c0100000 c035d83b > c0355ff4 > (XEN) c036cbe0 00000080 00000000 0000006c 00000000 00000000 00000000 > 00000000 > (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 > 00000000 > (XEN) 00000000 00000000 00000000 00000000 00000000 ffffe000 c073a000 > 00000000 > (XEN) ffffe000 c073a000 00000000 00000000 c0356867 c0355ff4 00000000 > 00000000 > (XEN) 00000000 00000000 c037e100 0702080b c010007a > (XEN) (file=memory.c, line=57) Could not allocate order=0 extent: id=73 > flags=0 (13715 of 39271) > (XEN) Domain 81 (vcpu#0) crashed on cpu#3: > (XEN) CPU: 3 > (XEN) EIP: e019:[<c01159b6>] > (XEN) EFLAGS: 00000246 CONTEXT: guest > (XEN) eax: 000005a8 ebx: 00000000 ecx: 00000000 edx: 00000000 > (XEN) esi: 00000000 edi: 00000000 ebp: 000005a8 esp: c0355e8c > (XEN) cr0: 8005003b cr3: e2d72000 > (XEN) ds: e021 es: e021 fs: 0000 gs: e021 ss: e021 cs: e019 > (XEN) Guest stack trace from esp=c0355e8c: > (XEN) c00005ac 00000003 c01159b6 0001e019 00010246 00000000 00000000 > 00000000 > (XEN) c0000000 c0361875 c20b5000 00001000 00000000 00000000 c022b738 > c037ed20 > (XEN) 00000000 c0800000 c073e020 00000800 c0361bef c073e020 00000400 > c02f0a33 > (XEN) c0355f60 00004000 00000000 00000000 00000000 00000000 00004000 > 00000000 > (XEN) 00000004 00000003 c073d018 00000000 c073d000 00000000 00000000 > c0362025 > (XEN) c073d000 00000000 c0364880 c0385ff0 c0353060 c02c7c37 00000000 > c03622f8 > (XEN) 006447ff c02f0a33 c0353060 c035d1e5 c02f0a33 c0100000 c035d83b > c0355ff4 > (XEN) c036cbe0 00000080 00000000 0000006c 00000000 00000000 00000000 > 00000000 > (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 > 00000000 > (XEN) 00000000 00000000 00000000 00000000 00000000 ffffe000 c073a000 > 00000000 > (XEN) ffffe000 c073a000 00000000 00000000 c0356867 c0355ff4 00000000 > 00000000 > (XEN) 00000000 00000000 c037e100 0702080b c010007a > (XEN) Domain 102 (vcpu#0) crashed on cpu#3: > (XEN) CPU: 3 > (XEN) EIP: e019:[<c01159b6>] > (XEN) EFLAGS: 00000246 CONTEXT: guest > (XEN) eax: 00000920 ebx: 00000000 ecx: 00000000 edx: 00000000 > (XEN) esi: 00000000 edi: 00000000 ebp: 00000920 esp: c0355e8c > (XEN) cr0: 8005003b cr3: f293e000 > (XEN) ds: e021 es: e021 fs: 0000 gs: e021 ss: e021 cs: e019 > (XEN) Guest stack trace from esp=c0355e8c: > (XEN) c0000924 00000003 c01159b6 0001e019 00010246 00000000 00000000 > 00000000 > (XEN) c0000000 c0361875 c2124000 00001000 00000000 00000000 c022b738 > c037ed20 > (XEN) 00000000 c0800000 c073e020 00000800 c0361bef c073e020 00000400 > c02f0a33 > (XEN) c0355f60 00004000 00000000 00000000 00000000 00000000 00004000 > 00000000 > (XEN) 00000004 00000003 c073d018 00000000 c073d000 00000000 00000000 > c0362025 > (XEN) c073d000 00000000 c0364880 c0385ff0 c0353060 c02c7c37 00000000 > c03622f8 > (XEN) 006447ff c02f0a33 c0353060 c035d1e5 c02f0a33 c0100000 c035d83b > c0355ff4 > (XEN) c036cbe0 00000080 00000000 0000006c 00000000 00000000 00000000 > 00000000 > (XEN) 00000000 00000000 00000000 00000000 00000000 00000000 00000000 > 00000000 > (XEN) 00000000 00000000 00000000 00000000 00000000 ffffe000 c073a000 > 00000000 > (XEN) ffffe000 c073a000 00000000 00000000 c0356867 c0355ff4 00000000 > 00000000 > (XEN) 00000000 00000000 c037e100 0702080b c010007a > > > x335b:~ # dmesg > Linux version 2.6.12-xen0 (root@x335b) (gcc version 3.3.3 (SuSE Linux)) > #1 Thu Oct 13 06:38:56 CDT 2005 > BIOS-provided physical RAM map: > Xen: 0000000000000000 - 000000001f400000 (usable) > 0MB HIGHMEM available. > 500MB LOWMEM available. > On node 0 totalpages: 128000 > DMA zone: 128000 pages, LIFO batch:31 > Normal zone: 0 pages, LIFO batch:1 > HighMem zone: 0 pages, LIFO batch:1 > DMI 2.3 present. > ACPI: RSDP (v000 IBM ) @ 0x000fdfc0 > ACPI: RSDT (v001 IBM SERONYXP 0x00001000 IBM 0x45444f43) @ > 0xf7feff80 > ACPI: FADT (v001 IBM SERONYXP 0x00001000 IBM 0x45444f43) @ > 0xf7feff00 > ACPI: MADT (v001 IBM SERONYXP 0x00001000 IBM 0x45444f43) @ > 0xf7fefe40 > ACPI: ASF! (v016 IBM SERONYXP 0x00000001 IBM 0x45444f43) @ > 0xf7fefd80 > ACPI: DSDT (v001 IBM SERTURQU 0x00001000 MSFT 0x0100000b) @ > 0x00000000 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled) > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled) > ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) > ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) > ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 14, version 17, address 0xfec00000, GSI 0-15 > ACPI: IOAPIC (id[0x0d] address[0xfec01000] gsi_base[16]) > IOAPIC[1]: apic_id 13, version 17, address 0xfec01000, GSI 16-31 > ACPI: IOAPIC (id[0x0c] address[0xfec02000] gsi_base[32]) > IOAPIC[2]: apic_id 12, version 17, address 0xfec02000, GSI 32-47 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ5 used by override. > Enabling APIC mode: Flat. Using 3 I/O APICs > Using ACPI (MADT) for SMP configuration information > IRQ lockup detection disabled > Allocating PCI resources starting at f8000000 (gap: f8000000:06c00000) > Built 1 zonelists > Kernel command line: root=/dev/sda2 ro console=tty0 > Initializing CPU#0 > PID hash table entries: 2048 (order: 11, 32768 bytes) > Xen reported: 3189.368 MHz processor. > Console: colour VGA+ 80x25 > Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) > Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) > Software IO TLB enabled: > Aperture: 64 megabytes > Bus range: 0x0000000004000000 - 0x0000000008000000 > Kernel range: 0x00000000c1456000 - 0x00000000c5456000 > vmalloc area: e0000000-f53fe000, maxmem 2d800000 > Memory: 434560k/512000k available (3563k kernel code, 77308k reserved, > 1134k data, 356k init, 0k highmem) > Checking if this processor honours the WP bit even in supervisor mode... > Ok. > Calibrating delay loop... 6370.09 BogoMIPS (lpj=31850496) > Mount-cache hash table entries: 512 > CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 > 00004400 00000000 00000000 > CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 > 00004400 00000000 00000000 > CPU: Trace cache: 12K uops, L1 D cache: 8K > CPU: L2 cache: 512K > CPU: L3 cache: 1024K > CPU: After all inits, caps: bfebd3f1 00000000 00000000 00000080 00004400 > 00000000 00000000 > CPU: Intel(R) Xeon(TM) CPU 3.20GHz stepping 05 > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Checking 'hlt' instruction... disabled > ENABLING IO-APIC IRQs > NET: Registered protocol family 16 > PCI: Using configuration type 1 > ACPI: Subsystem revision 20050309 > ACPI: Interpreter enabled > ACPI: Using IOAPIC for interrupt routing > ACPI: PCI Root Bridge [PCI0] (0000:00) > PCI: Probing PCI hardware (bus 00) > Boot video device is 0000:00:01.0 > PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.1 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Root Bridge [PCI1] (0000:01) > PCI: Probing PCI hardware (bus 01) > ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT] > ACPI: PCI Root Bridge [PCI2] (0000:02) > PCI: Probing PCI hardware (bus 02) > ACPI: PCI Interrupt Routing Table [\_SB_.PCI2._PRT] > ACPI: PCI Interrupt Link [LP00] (IRQs) *0, disabled. > ACPI: PCI Interrupt Link [LP01] (IRQs) *0, disabled. > ACPI: PCI Interrupt Link [LP02] (IRQs) *0, disabled. > ACPI: PCI Interrupt Link [LP03] (IRQs) *0, disabled. > ACPI: PCI Interrupt Link [LP04] (IRQs) *0, disabled. > ACPI: PCI Interrupt Link [LP05] (IRQs) *0, disabled. > ACPI: PCI Interrupt Link [LP06] (IRQs *9) > ACPI: PCI Interrupt Link [LP07] (IRQs) *0, disabled. > ACPI: PCI Interrupt Link [LP08] (IRQs *3) > ACPI: PCI Interrupt Link [LP09] (IRQs *4) > ACPI: PCI Interrupt Link [LP0A] (IRQs *10) > ACPI: PCI Interrupt Link [LP0B] (IRQs) *0, disabled. > ACPI: PCI Interrupt Link [LP0C] (IRQs) *0, disabled. > ACPI: PCI Interrupt Link [LP0D] (IRQs) *0, disabled. > ACPI: PCI Interrupt Link [LP0E] (IRQs) *0, disabled. > ACPI: PCI Interrupt Link [LP0F] (IRQs) *0, disabled. > ACPI: PCI Interrupt Link [LP10] (IRQs) *0, disabled. > ACPI: PCI Interrupt Link [LP11] (IRQs) *0, disabled. > ACPI: PCI Interrupt Link [LP12] (IRQs) *0, disabled. > ACPI: PCI Interrupt Link [LP13] (IRQs) *0, disabled. > ACPI: PCI Interrupt Link [LP14] (IRQs) *0, disabled. > ACPI: PCI Interrupt Link [LP15] (IRQs) *0, disabled. > ACPI: PCI Interrupt Link [LP16] (IRQs) *0, disabled. > ACPI: PCI Interrupt Link [LP17] (IRQs) *0, disabled. > ACPI: PCI Interrupt Link [LP18] (IRQs) *0, disabled. > ACPI: PCI Interrupt Link [LP19] (IRQs) *0, disabled. > ACPI: PCI Interrupt Link [LP1A] (IRQs) *0, disabled. > ACPI: PCI Interrupt Link [LP1B] (IRQs) *0, disabled. > ACPI: PCI Interrupt Link [LP1C] (IRQs) *0, disabled. > ACPI: PCI Interrupt Link [LP1D] (IRQs) *0, disabled. > ACPI: PCI Interrupt Link [LP1E] (IRQs) *0, disabled. > ACPI: PCI Interrupt Link [LP1F] (IRQs) *0, disabled. > ACPI: PCI Interrupt Link [LPUS] (IRQs *11) > xen_mem: Initialising balloon driver. > SCSI subsystem initialized > usbcore: registered new driver hub > PCI: Using ACPI for IRQ routing > PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a > report > Grant table initialized > IA-32 Microcode Update Driver: v1.14-xen <tigran@xxxxxxxxxxx> > Initializing Cryptographic API > serio: i8042 AUX port at 0x60,0x64 irq 12 > serio: i8042 KBD port at 0x60,0x64 irq 1 > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered > Floppy drive(s): fd0 is 1.44M > FDC 0 is a National Semiconductor PC87306 > RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize > loop: loaded (max 8 devices) > HP CISS Driver (v 2.6.6) > Intel(R) PRO/1000 Network Driver - version 6.0.54-k2 > Copyright (c) 1999-2004 Intel Corporation. > pcnet32.c:v1.30j 29.04.2005 tsbogend@xxxxxxxxxxxxxxxx > e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI > e100: Copyright(c) 1999-2005 Intel Corporation > tg3.c:v3.31 (June 8, 2005) > ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 24 (level, low) -> IRQ 24 > eth0: Tigon3 [partno(BCM95703A30) rev 1002 PHY(5703)] (PCIX:100MHz:64- > bit) 10/100/1000BaseT Ethernet 00:11:25:3e:39:f2 > eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] > TSOcap[1] > eth0: dma_rwctrl[769f4000] > ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 25 (level, low) -> IRQ 25 > eth1: Tigon3 [partno(BCM95703A30) rev 1002 PHY(5703)] (PCIX:100MHz:64- > bit) 10/100/1000BaseT Ethernet 00:11:25:3e:39:f3 > eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] > TSOcap[1] > eth1: dma_rwctrl[769f4000] > tun: Universal TUN/TAP device driver, 1.6 > tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> > Xen virtual console successfully installed as ttyS0 > Event-channel device installed. > xen_net: Initialising Xen netif backend. > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with > idebus=xx > SvrWks CSB5: IDE controller at PCI slot 0000:00:0f.1 > SvrWks CSB5: chipset revision 147 > SvrWks CSB5: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0x0700-0x0707, BIOS settings: hda:pio, hdb:pio > ide1: BM-DMA at 0x0708-0x070f, BIOS settings: hdc:DMA, hdd:DMA > Probing IDE interface ide0... > Probing IDE interface ide1... > hdc: LG CD-ROM CRN-8245B, ATAPI CD/DVD-ROM drive > ide1 at 0x170-0x177,0x376 on irq 15 > Probing IDE interface ide0... > Probing IDE interface ide2... > Probing IDE interface ide3... > Probing IDE interface ide4... > Probing IDE interface ide5... > hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33) > Uniform CD-ROM driver Revision: 3.20 > Red Hat/Adaptec aacraid driver (1.1.2-lk2 Oct 13 2005) > 3ware Storage Controller device driver for Linux v1.26.02.001. > libata version 1.11 loaded. > Fusion MPT base driver 3.01.20 > Copyright (c) 1999-2004 LSI Logic Corporation > ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 22 (level, low) -> IRQ 22 > mptbase: Initiating ioc0 bringup > ioc0: 53C1030: Capabilities={Initiator} > Fusion MPT SCSI Host driver 3.01.20 > scsi0 : ioc0: LSI53C1030, FwRev=01000e00h, Ports=1, MaxQ=222, IRQ=22 > Vendor: IBM-ESXS Model: MAS3367NC FN Rev: C901 > Type: Direct-Access ANSI SCSI revision: 03 > SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB) > SCSI device sda: drive cache: write through > SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB) > SCSI device sda: drive cache: write through > sda: sda1 sda2 > Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 > Vendor: IBM-ESXS Model: MAS3367NC FN Rev: C901 > Type: Direct-Access ANSI SCSI revision: 03 > SCSI device sdb: 71096640 512-byte hdwr sectors (36401 MB) > SCSI device sdb: drive cache: write through > SCSI device sdb: 71096640 512-byte hdwr sectors (36401 MB) > SCSI device sdb: drive cache: write through > sdb: sdb1 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 > > Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0 > Vendor: IBM Model: 25P3495a S320 1 Rev: 1 > Type: Processor ANSI SCSI revision: 02 > usbmon: debugs is not available > ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) > ACPI: PCI Interrupt Link [LPUS] enabled at IRQ 11 > ACPI: PCI Interrupt 0000:00:0f.2[A] -> Link [LPUS] -> GSI 11 (level, > low) -> IRQ 11 > ohci_hcd 0000:00:0f.2: OHCI Host Controller > ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1 > ohci_hcd 0000:00:0f.2: irq 11, io mem 0xfebfe000 > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 4 ports detected > USB Universal Host Controller Interface driver v2.2 > usbcore: registered new driver usbhid > drivers/usb/input/hid-core.c: v2.01:USB HID core driver > mice: PS/2 mouse device common for all mice > md: raid0 personality registered as nr 2 > md: raid1 personality registered as nr 3 > md: raid5 personality registered as nr 4 > raid5: automatically using best checksumming function: pIII_sse > pIII_sse : 1466.000 MB/sec > raid5: using function: pIII_sse (1466.000 MB/sec) > md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 > device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@xxxxxxxxxx > NET: Registered protocol family 2 > input: AT Translated Set 2 keyboard on isa0060/serio0 > IP: routing cache hash table of 4096 buckets, 32Kbytes > TCP established hash table entries: 16384 (order: 5, 131072 bytes) > TCP bind hash table entries: 16384 (order: 4, 65536 bytes) > TCP: Hash tables configured (established 16384 bind 16384) > NET: Registered protocol family 1 > NET: Registered protocol family 17 > input: PS/2 Generic Mouse on isa0060/serio1 > Bridge firewalling registered > md: Autodetecting RAID arrays. > md: autorun ... > md: ... autorun DONE. > EXT3-fs: mounted filesystem with ordered data mode. > VFS: Mounted root (ext3 filesystem) readonly. > Freeing unused kernel memory: 356k freed > kjournald starting. Commit interval 5 seconds > EXT3 (no)acl options not supported > EXT3 (no)acl options not supported > EXT3 FS on sda2, internal journal > md: Autodetecting RAID arrays. > md: autorun ... > md: ... autorun DONE. > Adding 1052216k swap on /dev/sda1. Priority:42 extents:1 > tg3: eth0: Link is up at 100 Mbps, full duplex. > tg3: eth0: Flow control is on for TX and on for RX. > Linux agpgart interface v0.101 (c) Dave Jones > ACPI: Power Button (FF) [PWRF] > end_request: I/O error, dev fd0, sector 0 > end_request: I/O error, dev fd0, sector 0 > program hwscan is using a deprecated SCSI ioctl, please convert it to > SG_IO > program hwscan is using a deprecated SCSI ioctl, please convert it to > SG_IO > end_request: I/O error, dev fd0, sector 0 > end_request: I/O error, dev fd0, sector 0 > nfs warning: mount version older than kernel > device vif0.0 entered promiscuous mode > bridge: can't decode speed from peth0: 0 > device peth0 entered promiscuous mode > xen-br0: port 1(vif0.0) entering learning state > xen-br0: topology change detected, propagating > xen-br0: port 1(vif0.0) entering forwarding state > tg3: peth0: Link is up at 100 Mbps, full duplex. > tg3: peth0: Flow control is on for TX and on for RX. > xen-br0: port 2(peth0) entering learning state > xen-br0: topology change detected, propagating > xen-br0: port 2(peth0) entering forwarding state > device vif74.1 entered promiscuous mode > xen-br0: port 3(vif74.1) entering learning state > xen-br0: topology change detected, propagating > xen-br0: port 3(vif74.1) entering forwarding state > device vif75.1 entered promiscuous mode > xen-br0: port 4(vif75.1) entering learning state > xen-br0: topology change detected, propagating > xen-br0: port 4(vif75.1) entering forwarding state > xen-br0: port 4(vif75.1) entering disabled state > device vif75.1 left promiscuous mode > xen-br0: port 4(vif75.1) entering disabled state > device vif76.1 entered promiscuous mode > xen-br0: port 4(vif76.1) entering learning state > xen-br0: topology change detected, propagating > xen-br0: port 4(vif76.1) entering forwarding state > device vif77.1 entered promiscuous mode > xen-br0: port 5(vif77.1) entering learning state > xen-br0: topology change detected, propagating > xen-br0: port 5(vif77.1) entering forwarding state > x335b:~ # > > The last output from 'xm-test' is: > > x335b:/tmp/logs/xm-test # tail x335sles9_pae4gb.output > Using config file "/dev/null". > Started domain testdomain > [dom0] Running `xm destroy testdomain' > > [dom0] Running `xm create /dev/null ramdisk=../../ramdisk/initrd.img > kernel=/boot/vmlinuz-2.6.12-xenU name=testdomain nics=0 vcpus=1 > memory=64 root=/dev/ram0' > Using config file "/dev/null". > Started domain testdomain > [dom0] Running `xm destroy testdomain' > > PASS: 10_create_fastdestroy.test > x335b:/tmp/logs/xm-test # > > > On Wed, 2005-09-28 at 15:24 -0500, David F Barrera wrote: > > http://bugzilla.xensource.com/bugzilla/show_bug.cgi?id=265 > > > > While running xm-test on two IBM xSeries 335s, one FC4 and the other one > > SLES 9, I noticed that time has stopped: > > > > [root@x335a xm-test]# date > > Wed Sep 28 13:59:18 CDT 2005 > > [root@x335a xm-test]# date > > Wed Sep 28 13:59:18 CDT 2005 > > > > >> 15 minutes later, > > [root@x335a xm-test]# date > > Wed Sep 28 13:59:18 CDT 2005 > > [root@x335a xm-test]# > > > > changeset: 7076:46046d5fb354 > > tag: tip > > user: emellor@ewan > > date: Tue Sep 27 16:09:46 2005 +0100 > > summary: Remove unused import, mark unused variables. > > > > The last output lines produced by xm-test are: > > cp 06_destroy_dom0_neg.py 06_destroy_dom0_neg.test > > chmod +x 06_destroy_dom0_neg.test > > > > The machines in question are running xm-test at the moment and appear > > 'stuck'. > > Both are displaying the "(XEN) Ouch! We are seriously BEHIND schedule!" > > messages. However, the static time issue may not be related to the Ouch! > > issue, bug # 257, as Paul Larson observed it on a machine that was not > > running xm-test at the time, hence we are submitting it as a different > > bug. > > > > -- Regards, David F Barrera Linux Technology Center Systems and Technology Group, IBM "The wisest men follow their own direction. " Euripides _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |