AW: [Xen-devel] can't boot dom0

[Stephan Böni <boeni@xxxxxx>]

Well, i have the same problem with scsi and fc devices. It seams that
this release is very very buggy at the moment.

Stephan


> -----Ursprüngliche Nachricht-----
> Von: Chris Bainbridge [mailto:chris.bainbridge@xxxxxxxxx]
> Gesendet: Mittwoch, 5. Oktober 2005 16:56
> An: xen-devel
> Betreff: [Xen-devel] can't boot dom0
> 
> 
> Hi,
> 
> Just tried latest changeset 7217. It seems to hang after finding the
> ata devices. Log:
> 
>      _____  ___         _                _
>  \ \/ /___ _ __   |___ / / _ \     __| | _____   _____| |
>   \  // _ \ '_ \    |_ \| | | |__ / _` |/ _ \ \ / / _ \ |
>   /  \  __/ | | |  ___) | |_| |__| (_| |  __/\ V /  __/ |
>  /_/\_\___|_| |_| |____(_)___/    \__,_|\___| \_/ \___|_|
> 
>  http://www.cl.cam.ac.uk/netos/xen
>  University of Cambridge Computer Laboratory
> 
>  Xen version 3.0-devel (portage@xxxxxx) (gcc version 3.4.4 (Gentoo
> 3.4.4-r1, ssp-3.4.4-1.0, pie-8.7.8)) Wed Oct  5 15:28:35 BST 2005
>  Latest ChangeSet:
> 
> (XEN) Physical RAM map:
> (XEN)  0000000000000000 - 00000000000a0000 (usable)
> (XEN)  00000000000f0000 - 0000000000100000 (reserved)
> (XEN)  0000000000100000 - 000000003fe8cc00 (usable)
> (XEN)  000000003fe8cc00 - 000000003fe8ec00 (ACPI NVS)
> (XEN)  000000003fe8ec00 - 000000003fe90c00 (ACPI data)
> (XEN)  000000003fe90c00 - 0000000040000000 (reserved)
> (XEN)  00000000f0000000 - 00000000f4000000 (reserved)
> (XEN)  00000000fec00000 - 00000000fed00400 (reserved)
> (XEN)  00000000fed20000 - 00000000feda0000 (reserved)
> (XEN)  00000000fee00000 - 00000000fef00000 (reserved)
> (XEN)  00000000ffb00000 - 0000000100000000 (reserved)
> (XEN) System RAM: 1022MB (1046704kB)
> (XEN) Xen heap: 10MB (10656kB)
> (XEN) PAE disabled.
> (XEN) found SMP MP-table at 000fe710
> (XEN) DMI 2.3 present.
> (XEN) Using APIC driver default
> (XEN) ACPI: RSDP (v002 DELL                                  
> ) @ 0x000feb00
> (XEN) ACPI: XSDT (v001 DELL    PESC430 0x00000006 ASL  
> 0x00000061) @ 0x000fd244
> (XEN) ACPI: FADT (v003 DELL    PESC430 0x00000006 ASL  
> 0x00000061) @ 0x000fd33c
> (XEN) ACPI: SSDT (v001   DELL    st_ex 0x00001000 INTL 
> 0x20050211) @ 0xfffd2a19
> (XEN) ACPI: MADT (v001 DELL    PESC430 0x00000006 ASL  
> 0x00000061) @ 0x000fd430
> (XEN) ACPI: BOOT (v001 DELL    PESC430 0x00000006 ASL  
> 0x00000061) @ 0x000fd4a2
> (XEN) ACPI: ASF! (v016 DELL    PESC430 0x00000006 ASL  
> 0x00000061) @ 0x000fd4ca
> (XEN) ACPI: MCFG (v001 DELL    PESC430 0x00000006 ASL  
> 0x00000061) @ 0x000fd531
> (XEN) ACPI: HPET (v001 DELL    PESC430 0x00000006 ASL  
> 0x00000061) @ 0x000fd56f
> (XEN) ACPI: DSDT (v001   DELL    dt_ex 0x00001000 INTL 
> 0x20050211) @ 0x00000000
> (XEN) ACPI: Local APIC address 0xfee00000
> (XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> (XEN) Processor #0 15:4 APIC version 20
> (XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> (XEN) Processor #1 15:4 APIC version 20
> (XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled)
> (XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
> (XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
> (XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
> (XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> (XEN) ACPI: IRQ0 used by override.
> (XEN) ACPI: IRQ2 used by override.
> (XEN) ACPI: IRQ9 used by override.
> (XEN) Enabling APIC mode:  Flat.  Using 1 I/O APICs
> (XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000
> (XEN) Using ACPI (MADT) for SMP configuration information
> (XEN) Initializing CPU#0
> (XEN) Detected 2793.112 MHz processor.
> (XEN) Using sc EDF Scheduler (sedf)
> (XEN) CP 12K uops, L1 D N) CPU: L2 cache: 1024K
> (XEN) rocessor ID: 0
> (XEN) CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 01
> (XEN) Booting processor 1/1 eip 90000
> (XEN) Initializing CPU#1
> (XEN) CPU: Trace cache: 12K uops, L1 D cache: 16K
> (XEN) CPU: L2 cache: 1024K
> (XEN) CPU: Physical Processor ID: 0
> (XEN) CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 01
> (XEN) Total of 2 processors activated.
> (XEN) ENABLING IO-APIC IRQs
> (XEN) ..TIMER: vector=0x31 pin1=2 pin2=-1
> (XEN) checking TSC synchronization across 2 CPUs: passed.
> (XEN) Platform timer is 14.318MHz HPET
> (XEN) Brought up 2 CPUs
> (XEN) mtrr: v2.0 (20020519)
> (XEN) *** LOADING DOMAIN 0 ***
> (XEN) Xen-ELF header found:
> 'GUEST_OS=linux,GUEST_VER=2.6,XEN_VER=3.0,VIRT_BASE=0xC0000000
> ,PAE=no,LOADER=generic'
> (XEN) PHYSICAL MEMORY ARRANGEMENT:
> (XEN)  Dom0 alloc.:   01800000->02000000 (22528 pages to be allocated)
> (XEN) VIRTUAL MEMORY ARRANGEMENT:
> (XEN)  Loaded kernel: c0100000->c03a5fe8
> (XEN)  Init. ramdisk: c03a6000->c03a6000
> (XEN)  Phys-Mach map: c03a6000->c03be000
> (XEN)  Start info:    c03be000->c03bf000
> (XEN)  Page tables:   c03bf000->c03c2000
> (XEN)  Boot stack:    c03c2000->c03c3000
> (XEN)  TOTAL:         c0000000->c0800000
> (XEN)  ENTRY ADDRESS: c0100000
> (XEN) Scrubbing Free RAM: ...........done.
> (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
> input to Xen).
> Linux version 2.6.12.5-xen (root@xen) (gcc version 3.4.4 (Gentoo
> 3.4.4-r1, ssp-3.4.4-1.0, pie-8.7.8)) #1 Wed Oct 5 15:41:52 BST 2005
> BIOS-provided physical RAM map:
>  Xen: 0000000000000000 - 0000000006000000 (usable)
> 0MB HIGHMEM available.
> 96MB LOWMEM available.
> DMI 2.3 present.
> IRQ lockup detection disabled
> Allocating PCI resources starting at 40000000 (gap: 40000000:b0000000)
> Built 1 zonelists
> Kernel command line: root=/dev/md2
> Initializing CPU#0
> PID hash table entries: 512 (order: 9, 8192 bytes)
> Xen reported: 2793.112 MHz processor.
> Console: colour VGA+ 80x25
> Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
> Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
> Software IO TLB disabled
> vmalloc area: c6800000-fb7fe000, maxmem 34000000
> Memory: 94336k/98304k available (1833k kernel code, 3832k reserved,
> 549k data, 116k init, 0k highmem)
> Checking if this processor honours the WP bit even in 
> supervisor mode... Ok.
> Mount-cache hash table entries: 512
> CPU: Trace cache: 12K uops, L1 D cache: 16K
> CPU: L2 cache: 1024K
> CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 01
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Checking 'hlt' instruction... disabled
> NET: Registered protocol family 16
> PCI: Using configuration type 1
> xen_mem: Initialising balloon driver.
> SCSI subsystem initialized
> usbcore: registered new driver hub
> PCI: Probing PCI hardware
> PCI: Probing PCI hardware (bus 00)
> PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
> PCI: Transparent bridge - 0000:00:1e.0
> PCI: Using IRQ router PIIX/ICH [8086/27b8] at 0000:00:1f.0
> PCI: IRQ 0 for device 0000:00:01.0 doesn't match PIRQ mask - 
> try pci=usepirqmask
> PCI: Found IRQ 11 for device 0000:00:01.0
> PCI: Sharing IRQ 11 with 0000:00:1c.0
> RQ 11 with 0000:00:1f.1h 0000:00:1c.4
> PCI: IRQ 0 for device 0000:00:1c.5 doesn't match PIRQ mask - 
> try pci=usepirqmask
> PCI: Found IRQ 10 for device 0000:00:1c.5
> PCI: Sharing IRQ 10 with 0000:00:1f.3
> PCI: Sharing IRQ 10 with 0000:04:00.0
> Grant table initialized
> Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
> PCI: Found IRQ 11 for device 0000:00:01.0
> PCI: Sharing IRQ 11 with 0000:00:1c.0
> PCI: Sharing IRQ 11 with 0000:00:1c.4
> PCI: Sharing IRQ 11 with 0000:00:1f.1
> assign_interrupt_mode Found MSI capability
> PCI: Found IRQ 11 for device 0000:00:1c.0
> PCI: Sharing IRQ 11 with 0000:00:01.0
> PCI: Sharing IRQ 11 with 0000:00:1c.4
> PCI: Sharing IRQ 11 with 0000:00:1f.1
> assign_interrupt_mode Found MSI capability
> PCI: Found IRQ 11 for device 0000:00:1c.4
> PCI: Sharing IRQ 11 with 0000:00:01.0
> PCI: Sharing IRQ 11 with 0000:00:1c.0
> PCI: Sharing IRQ 11 with 0000:00:1f.1
> assign_interrupt_mode Found MSI capability
> PCI: Found IRQ 10 for device 0000:00:1c.5
> PCI: Sharing IRQ 10 with 0000:00:1f.3
> PCI: Sharing IRQ 10 with 0000:04:00.0
> assign_interrupt_mode Found MSI capability
> Real Time Clock Driver v1.12
> serio: i8042 AUX port at 0x60,0x64 irq 12
> serio: i8042 KBD port at 0x60,0x64 irq 1
> Serial: 8250/16550 driver $Revision: 1.90 $ 5 ports, IRQ 
> sharing disabled
> io scheduler noop registered
> io scheduler deadline registered
> loop: loaded (max 8 devices)
> tg3.c:v3.31 (June 8, 2005)
> PCI: Found IRQ 10 for device 0000:04:00.0
> PCI: Sharing IRQ 10 with 0000:00:1c.5
> PCI: Sharing IRQ 10 with 0000:00:1f.3
> eth0: Tigon3 [partno(BCM95751) rev 4001 PHY(5750)]
> (PCIX:100MHz:32-bit) 10/100/1000BaseT Ethernet 00:12:3f:71:ed:be
> eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] Split[0] 
> WireSpeed[1] TSOcap[1]
> eth0: dma_rwctrl[76180000]
> WARNING: Failed to register Xen virtual console driver as 'ttyS0'
> Evice installed.
> xen_net: Initialising Xen netif backend.
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override 
> with idebus=xx
> ICH7: IDE controller at PCI slot 0000:00:1f.1
> PCI: Found IRQ 11 for device 0000:00:1f.1
> PCI: Sharing IRQ 11 with 0000:00:01.0
> PCI: Sharing IRQ 11 with 0000:00:1c.0
> PCI: Sharing IRQ 11 with 0000:00:1c.4
> ICH7: chipset revision 1
> ICH7: not 100% native mode: will probe irqs later
>     ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
> hda: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> hda: ATAPI 48X DVD-ROM drive, 256kB Cache, UDMA(33)
> Uniform CD-ROM driver Revision: 3.20
> PCI: Found IRQ 5 for device 0000:00:1f.2
> ata1: SATA max UDMA/133 cmd 0xFE00 ctl 0xFE12 bmdma 0xFEA0 irq 5
> ata2: SATA max UDMA/133 cmd 0xFE20 ctl 0xFE32 bmdma 0xFEA8 irq 5
> ata1: dev 0 ATA, max UDMA/133, 312500000 sectors: lba48
> ata1: dev 1 ATA, max UDMA/133, 320173056 sectors: lba48
> 
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-devel
> 

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel