[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH] install to /usr/$(LIB)/ instead of /usr/lib



On Mon, 12 Sep 2005, Keir Fraser wrote:
> On 12 Sep 2005, at 18:23, Rik van Riel wrote:
> 
> > This trivial patch makes sure that mem-map.sxp and the qemu bits
> > get installed in /usr/lib64 on distributions that want things
> > there.
> 
> The default script that uses them (tools/examples/xmexample.vmx) will 
> not look under lib64. Can you come up with a clean way to determine the 
> correct path from within that Python script, and resubmit?

It would appear to be even safer (and simpler) to simply
generate the right xmexample.vmx at compile time, expanding
the $(LIBDIR) variable in just one place.

Signed-off-by: Rik van Riel <riel@xxxxxxxxxx>

 examples/Makefile             |    8 ++-
 examples/xmexample.vmx        |   96 --------------------------------------
 examples/xmexample.vmx.in     |   96 ++++++++++++++++++++++++++++++++++++++
 ioemu/target-i386-dm/Makefile |    2
 4 files changed, 103 insertions(+), 99 deletions(-)

diff -Nurp xen-unstable.orig/tools/examples/Makefile 
xen-unstable/tools/examples/Makefile
--- xen-unstable.orig/tools/examples/Makefile   2005-09-07 07:19:46.000000000 
-0400
+++ xen-unstable/tools/examples/Makefile        2005-09-12 14:35:28.000000000 
-0400
@@ -24,7 +24,7 @@ XEN_SCRIPTS += network-route vif-route
 XEN_SCRIPTS += block-file
 XEN_SCRIPTS += block-enbd
 
-XEN_BOOT_DIR = /usr/lib/xen/boot
+XEN_BOOT_DIR = /usr/$(LIBDIR)/xen/boot
 XEN_BOOT = mem-map.sxp
 
 XEN_HOTPLUG_DIR = /etc/hotplug
@@ -36,12 +36,15 @@ build:
 install: all install-initd install-configs install-scripts install-boot \
         install-hotplug
 
+xmexample.vmx: xmexample.vmx.in
+       sed -e 's/@@LIBDIR@@/$(LIBDIR)/' < $< > $@
+
 install-initd:
        [ -d $(DESTDIR)/etc/init.d ] || $(INSTALL_DIR) $(DESTDIR)/etc/init.d
        $(INSTALL_PROG) $(XEND_INITD) $(DESTDIR)/etc/init.d
        $(INSTALL_PROG) $(XENDOMAINS_INITD) $(DESTDIR)/etc/init.d
 
-install-configs:
+install-configs: $(XEN_CONFIGS)
        [ -d $(DESTDIR)$(XEN_CONFIG_DIR) ] || \
                $(INSTALL_DIR) $(DESTDIR)$(XEN_CONFIG_DIR)
        [ -d $(DESTDIR)$(XEN_CONFIG_DIR)/auto ] || \
@@ -76,3 +79,4 @@ install-hotplug:
        done
 
 clean:
+       $(RM) xmexample.vmx
diff -Nurp xen-unstable.orig/tools/examples/xmexample.vmx 
xen-unstable/tools/examples/xmexample.vmx
--- xen-unstable.orig/tools/examples/xmexample.vmx      2005-09-07 
07:19:46.000000000 -0400
+++ xen-unstable/tools/examples/xmexample.vmx   1969-12-31 19:00:00.000000000 
-0500
@@ -1,96 +0,0 @@
-#  -*- mode: python; -*-
-#============================================================================
-# Python configuration setup for 'xm create'.
-# This script sets the parameters used when a domain is created using 'xm 
create'.
-# You use a separate script for each domain you want to create, or 
-# you can set the parameters for the domain on the xm command line.
-#============================================================================
-
-#----------------------------------------------------------------------------
-# Kernel image file.
-kernel = "/usr/lib/xen/boot/vmxloader"
-
-# The domain build function. VMX domain uses 'vmx'.
-builder='vmx'
-
-# Initial memory allocation (in megabytes) for the new domain.
-memory = 128
-
-# A name for your domain. All domains must have different names.
-name = "ExampleVMXDomain"
-
-# Which CPU to start domain on? 
-#cpu = -1   # leave to Xen to pick
-
-# Optionally define mac and/or bridge for the network interfaces.
-# Random MACs are assigned if not given.
-#vif = [ 'mac=aa:00:00:00:00:11, bridge=xen-br0' ]
-
-#----------------------------------------------------------------------------
-# Define the disk devices you want the domain to have access to, and
-# what you want them accessible as.
-# Each disk entry is of the form phy:UNAME,DEV,MODE
-# where UNAME is the device, DEV is the device name the domain will see,
-# and MODE is r for read-only, w for read-write.
-
-#disk = [ 'phy:hda1,hda1,r' ]
-disk = [ 'file:/var/images/min-el3-i386.img,ioemu:hda,w' ]
-
-#----------------------------------------------------------------------------
-# Set according to whether you want the domain restarted when it exits.
-# The default is 'onreboot', which restarts the domain when it shuts down
-# with exit code reboot.
-# Other values are 'always', and 'never'.
-
-#restart = 'onreboot'
-
-#============================================================================
-
-
-# New stuff
-device_model = '/usr/lib/xen/bin/qemu-dm'
-
-# Advanced users only. Don't touch if you don't know what you're doing
-memmap = '/usr/lib/xen/boot/mem-map.sxp'
-
-#-----------------------------------------------------------------------------
-# Disk image for 
-#cdrom=
-
-#-----------------------------------------------------------------------------
-# boot on floppy (a), hard disk (c) or CD-ROM (d) 
-#boot=[a|c|d]
-#-----------------------------------------------------------------------------
-#  write to temporary files instead of disk image files
-#snapshot=1
-
-#----------------------------------------------------------------------------
-# enable SDL library for graphics, default = 0
-sdl=0
-
-#----------------------------------------------------------------------------
-# enable VNC library for graphics, default = 1
-vnc=1
-
-#----------------------------------------------------------------------------
-# enable spawning vncviewer(only valid when vnc=1), default = 1
-vncviewer=1
-
-#----------------------------------------------------------------------------
-# no graphics, use serial port
-#nographic=0
-
-
-#-----------------------------------------------------------------------------
-#   enable audio support
-#enable-audio=1
-
-
-#-----------------------------------------------------------------------------
-#    set the real time clock to local time [default=0 i.e. set to utc]
-#localtime=1
-
-
-#-----------------------------------------------------------------------------
-#    start in full screen
-#full-screen=1   
diff -Nurp xen-unstable.orig/tools/examples/xmexample.vmx.in 
xen-unstable/tools/examples/xmexample.vmx.in
--- xen-unstable.orig/tools/examples/xmexample.vmx.in   1969-12-31 
19:00:00.000000000 -0500
+++ xen-unstable/tools/examples/xmexample.vmx.in        2005-09-12 
14:22:26.000000000 -0400
@@ -0,0 +1,96 @@
+#  -*- mode: python; -*-
+#============================================================================
+# Python configuration setup for 'xm create'.
+# This script sets the parameters used when a domain is created using 'xm 
create'.
+# You use a separate script for each domain you want to create, or 
+# you can set the parameters for the domain on the xm command line.
+#============================================================================
+
+#----------------------------------------------------------------------------
+# Kernel image file.
+kernel = "/usr/@@LIBDIR@@/xen/boot/vmxloader"
+
+# The domain build function. VMX domain uses 'vmx'.
+builder='vmx'
+
+# Initial memory allocation (in megabytes) for the new domain.
+memory = 128
+
+# A name for your domain. All domains must have different names.
+name = "ExampleVMXDomain"
+
+# Which CPU to start domain on? 
+#cpu = -1   # leave to Xen to pick
+
+# Optionally define mac and/or bridge for the network interfaces.
+# Random MACs are assigned if not given.
+#vif = [ 'mac=aa:00:00:00:00:11, bridge=xen-br0' ]
+
+#----------------------------------------------------------------------------
+# Define the disk devices you want the domain to have access to, and
+# what you want them accessible as.
+# Each disk entry is of the form phy:UNAME,DEV,MODE
+# where UNAME is the device, DEV is the device name the domain will see,
+# and MODE is r for read-only, w for read-write.
+
+#disk = [ 'phy:hda1,hda1,r' ]
+disk = [ 'file:/var/images/min-el3-i386.img,ioemu:hda,w' ]
+
+#----------------------------------------------------------------------------
+# Set according to whether you want the domain restarted when it exits.
+# The default is 'onreboot', which restarts the domain when it shuts down
+# with exit code reboot.
+# Other values are 'always', and 'never'.
+
+#restart = 'onreboot'
+
+#============================================================================
+
+
+# New stuff
+device_model = '/usr/@@LIBDIR@@/xen/bin/qemu-dm'
+
+# Advanced users only. Don't touch if you don't know what you're doing
+memmap = '/usr/@@LIBDIR@@/xen/boot/mem-map.sxp'
+
+#-----------------------------------------------------------------------------
+# Disk image for 
+#cdrom=
+
+#-----------------------------------------------------------------------------
+# boot on floppy (a), hard disk (c) or CD-ROM (d) 
+#boot=[a|c|d]
+#-----------------------------------------------------------------------------
+#  write to temporary files instead of disk image files
+#snapshot=1
+
+#----------------------------------------------------------------------------
+# enable SDL library for graphics, default = 0
+sdl=0
+
+#----------------------------------------------------------------------------
+# enable VNC library for graphics, default = 1
+vnc=1
+
+#----------------------------------------------------------------------------
+# enable spawning vncviewer(only valid when vnc=1), default = 1
+vncviewer=1
+
+#----------------------------------------------------------------------------
+# no graphics, use serial port
+#nographic=0
+
+
+#-----------------------------------------------------------------------------
+#   enable audio support
+#enable-audio=1
+
+
+#-----------------------------------------------------------------------------
+#    set the real time clock to local time [default=0 i.e. set to utc]
+#localtime=1
+
+
+#-----------------------------------------------------------------------------
+#    start in full screen
+#full-screen=1   
diff -Nurp xen-unstable.orig/tools/ioemu/target-i386-dm/Makefile 
xen-unstable/tools/ioemu/target-i386-dm/Makefile
--- xen-unstable.orig/tools/ioemu/target-i386-dm/Makefile       2005-09-07 
07:19:46.000000000 -0400
+++ xen-unstable/tools/ioemu/target-i386-dm/Makefile    2005-09-12 
14:31:08.000000000 -0400
@@ -3,7 +3,7 @@ include $(XEN_ROOT)/tools/Rules.mk
 include config.mak
 override TARGET_ARCH=i386
 
-INSTALL_DIR := $(DESTDIR)/usr/lib/xen/bin
+INSTALL_DIR := $(DESTDIR)/usr/$(LIBDIR)/xen/bin
 TARGET_PATH=$(SRC_PATH)/target-$(TARGET_ARCH)
 VPATH=$(SRC_PATH):$(TARGET_PATH):$(SRC_PATH)/hw:$(SRC_PATH)/audio
 DEFINES=-I. -I$(TARGET_PATH) -I$(SRC_PATH) -I$(XEN_ROOT)/xen/include/public

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.