[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Xen-devel] Xen on ES7000 x86_64 take 2



Jun,

Here is the disassembly you had asked for. Not sure if you are still
interested in it as Jerone's patch seems to point that it was totally a
NX/XD issue. But I could be wrong.

Aravindh

> -----Original Message-----
> From: Nakajima, Jun [mailto:jun.nakajima@xxxxxxxxx]
> Sent: Friday, July 15, 2005 5:18 PM
> To: Puthiyaparambil, Aravindh; xen-devel@xxxxxxxxxxxxxxxxxxx; Jerone
Young
> Cc: Magolan, John F; Subrahmanian, Raj; Davis, Jason; Vessey, Bruce A
> Subject: RE: [Xen-devel] Xen on ES7000 x86_64 take 2
> 
> Puthiyaparambil, Aravindh wrote:
> > Jun,
> >
> > Here is the output with debug turned on. I will try Jerone's patch
> > next and post the output of that too.
> 
> NX/XD is one reason, but looks like pfn=0 in the L1 entry. Can you
show
> the assembly code from ffffffff8021b600 (do "objdump -d vmlinux") or
so
> to see who this is?
> 
> >
> > Aravindh
> >
> > ide: Assuming 33MHz system bus speed for PIO modes; override with
> > idebus=xx
> > ICH4: IDE controller at PCI slot 0000:00:1f.1
> > ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
> > ICH4: chipset revision 2
> > ICH4: not 100% native mode: will probe irqs later
> >     ide0: BM-DMA at 0x1880-0x1887(XEN) DOM0: (file=mm.c, line=997)
Bad
> > L1 flags 800000
> > (XEN)
> > <1>Unable to handle kernel paging request at ffff88001fd86000 RIP:
> > <ffffffff8021b8c2>{__memset+50}
> > Unable to handle kernel NULL pointer dereference at 0000000000000880
> > RIP:
> 
> 
> 
> Jun
> ---
> Intel Open Source Technology Center

Attachment: disassembly-nx.txt
Description: disassembly-nx.txt

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.