[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Xen-devel] asterisk, ztdummy, and usb (and HZ = 100 under xen ???)

> > The problem is that the ztdummy driver assumes 1000HZ,
> Do you mean it has a hardcoded value instead of using the "HZ"
> I'd consider that a bug - have you tried contacting the codes
> maintainers?

It's not as straight forward as that. Asterisk needs a 1000hz timer for
certain functions to work. For certain things to work really properly
(eg fax), this timer needs to be synchronised exactly to the exchange
(eg from the isdn/e1 card) otherwise frames might be dropped.

Under 2.4, the ztdummy driver uses the UHCI USB hardware to get a 1000hz
interval. Under 2.6, HZ=1000 (on the x86 anyway, except under xen :) so
it counts jiffies instead. If you have HZ=100 then you can't get 1000
ticks from it no matter what macro you use, so the best you could do
would be to fall back to UHCI timing when HZ is not evenly divisible by
1000, or fail if no UHCI controller is present.

I'm surprised my patch (eg generate 10 ticks ever 1/100 seconds) works
as well as it does.


Xen-devel mailing list



Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.