[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] problems with xen-br0

On Fri, 31 Dec 2004, Christian Limpach wrote:

> On Fri, Dec 31, 2004 at 10:17:34AM -0700, Ronald G. Minnich wrote:
> > Start the domain, get this:
> > vif3.0    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF  
> > 
> > What am I missing?
> I bet the FE:FF:FF:FF:FF:FF hardware address is special in some way or
> another and the bridge code doesn't like it.  The default ones are much
> saner ;-)

I'm not sure that would explain why it all starts working when I set the 
IP address on eth0 and xen-br0. I don't think that's it.

Also, ...
I can do this
ifconfig xen-br0 down
brctl del xen-br0
ifconfig vif3.0

and it all starts working. It's something going on with the bridge.


The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
Xen-devel mailing list



Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.