[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] Re: VIF Interfaces not transparent to all ethernet protocols?



> In domain 1, what happens if you do 'tcpdump -i eth0'. Do you see the
> packets? I presume you don't see them if you do 'tcpdump -i vif1.1' in
> domain 0.

eth0 is the interface I used for connecting to the lan, I can see packets 
passing, if I do that.
If I do 'tcpdump -i eth1' I can see the PPPoE packets inside domain 1, too.
If I put an IP address on that interface in domain 1 and ping something on that 
subnet, I see exactly the same output on
tcpdump -i eth1    in domain 1
and
tcpdump -i vif1.1  in domain 0
but not for PPPoE traffic FROM domain 1, the other direction works fine.


> Do you see any drops or errors in the ifconfig stats in either domain?

No, the ifconfig counters for drops or errors aren't increasing in either 
domain.


Armin




-------------------------------------------------------
This SF.Net email is sponsored by:
Sybase ASE Linux Express Edition - download now for FREE
LinuxWorld Reader's Choice Award Winner for best database on Linux.
http://ads.osdn.com/?ad_id=5588&alloc_id=12065&op=click
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.