Re: [Xen-devel] Virtual ethernet driver.

[Lukasz Grzelak <gigi@xxxxxxx>]

On Fri, 26 Nov 2004, Ian Pratt wrote:

> Perhaps start xend with 'xend trace_start' and then see if
> xend.log can shed any light.
Xend work fine i thing i have broken kernel or system.

> While the hang is going on, do you see the new vif if you do an
> 'ifconfig' in domain 0? Has it been added to the bridge?

5: xen-br0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue
    link/ether 00:50:da:1c:b1:74 brd ff:ff:ff:ff:ff:ff
    inet 192.168.244.13/32 scope global xen-br0
    inet6 fe80::200:ff:fe00:0/64 scope link
6: vif1.0: <BROADCAST,MULTICAST,PROMISC> mtu 1500 qdisc noop
    link/ether aa:00:01:7d:49:8a brd ff:ff:ff:ff:ff:ff

anubis ~ # brctl show
bridge name     bridge id               STP enabled     interfaces
xen-br0         8000.0050da1cb174       no              eth0
                                                        vif1.0


vif1.0 added to system and to bridge, but it dont up.


Pozdrawiam.

Lukasz Grzelak
Sys-Net Admin
------------------------------------------------------
iTk - info@xxxxxx - http://www.itk.pl - +48 91 8137012



-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now. 
http://productguide.itmanagersjournal.com/
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/xen-devel