Linux version 2.6.7 (root@filer11.local) (gcc version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #4 SMP Fri Aug 13 18:39:28 CEST 2004

BIOS-provided physical RAM map:

 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)

 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)

 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)

 BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)

 BIOS-e820: 000000003fff0000 - 000000003ffff000 (ACPI data)

 BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS)

 BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)

 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)

 BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)

127MB HIGHMEM available.

896MB LOWMEM available.

found SMP MP-table at 000ff780

On node 0 totalpages: 262128

  DMA zone: 4096 pages, LIFO batch:1

  Normal zone: 225280 pages, LIFO batch:16

  HighMem zone: 32752 pages, LIFO batch:7

DMI 2.3 present.

ACPI: RSDP (v000 ACPIAM                                    ) @ 0x000f4fa0

ACPI: RSDT (v001 A M I  OEMRSDT  0x02000304 MSFT 0x00000097) @ 0x3fff0000

ACPI: FADT (v002 A M I  OEMFACP  0x02000304 MSFT 0x00000097) @ 0x3fff0200

ACPI: MADT (v001 A M I  OEMAPIC  0x02000304 MSFT 0x00000097) @ 0x3fff0300

ACPI: OEMB (v001 A M I  OEMBIOS  0x02000304 MSFT 0x00000097) @ 0x3ffff040

ACPI: DSDT (v001  0ABBP 0ABBP000 0x00000000 INTL 0x02002026) @ 0x00000000

ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)

Processor #0 15:2 APIC version 20

ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)

Processor #6 15:2 APIC version 20

ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)

ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)

Using ACPI for processor (LAPIC) configuration information

Intel MultiProcessor Specification v1.4

    Virtual Wire compatibility mode.

OEM ID: INTEL    Product ID: KingsCanyonC APIC at: 0xFEE00000

I/O APIC #7 Version 32 at 0xFEC00000.

I/O APIC #8 Version 32 at 0xFEC80000.

I/O APIC #9 Version 32 at 0xFEC80400.

I/O APIC #10 Version 32 at 0xFEC81000.

I/O APIC #11 Version 32 at 0xFEC81400.

Enabling APIC mode:  Flat.  Using 5 I/O APICs

Processors: 2

Built 1 zonelists

Kernel command line: ro root=LABEL=/12 console=ttyS0,115200n8

Initializing CPU#0

PID hash table entries: 4096 (order 12: 32768 bytes)

Detected 2667.141 MHz processor.

Using tsc for high-res timesource

Console: colour VGA+ 80x25

Memory: 1034036k/1048512k available (2399k kernel code, 13516k reserved, 758k data, 408k init, 131008k highmem)

Checking if this processor honours the WP bit even in supervisor mode... Ok.

Calibrating delay loop... 5259.26 BogoMIPS

Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

Mount-cache hash table entries: 512 (order: 0, 4096 bytes)

CPU: Trace cache: 12K uops, L1 D cache: 8K

CPU: L2 cache: 512K

CPU: Hyper-Threading is disabled

Intel machine check architecture supported.

Intel machine check reporting enabled on CPU#0.

CPU0: Intel P4/Xeon Extended MCE MSRs (12) available

CPU0: Thermal monitoring enabled

Enabling fast FPU save and restore... done.

Enabling unmasked SIMD FPU exception support... done.

Checking 'hlt' instruction... OK.

CPU0: Intel(R) Xeon(TM) CPU 2.66GHz stepping 05

per-CPU timeslice cutoff: 1462.58 usecs.

task migration cache decay timeout: 2 msecs.

enabled ExtINT on CPU#0

ESR value before enabling vector: 00000000

ESR value after enabling vector: 00000000

Booting processor 1/6 eip 2000

Initializing CPU#1

masked ExtINT on CPU#1

ESR value before enabling vector: 00000000

ESR value after enabling vector: 00000000

Calibrating delay loop... 5324.80 BogoMIPS

CPU: Trace cache: 12K uops, L1 D cache: 8K

CPU: L2 cache: 512K

CPU: Hyper-Threading is disabled

Intel machine check architecture supported.

Intel machine check reporting enabled on CPU#1.

CPU1: Intel P4/Xeon Extended MCE MSRs (12) available

CPU1: Thermal monitoring enabled

CPU1: Intel(R) Xeon(TM) CPU 2.66GHz stepping 05

Total of 2 processors activated (10584.06 BogoMIPS).

ENABLING IO-APIC IRQs

Setting 7 in the phys_id_present_map

...changing IO-APIC physical APIC ID to 7 ... ok.

Setting 8 in the phys_id_present_map

...changing IO-APIC physical APIC ID to 8 ... ok.

Setting 9 in the phys_id_present_map

...changing IO-APIC physical APIC ID to 9 ... ok.

Setting 10 in the phys_id_present_map

...changing IO-APIC physical APIC ID to 10 ... ok.

Setting 11 in the phys_id_present_map

...changing IO-APIC physical APIC ID to 11 ... ok.

..TIMER: vector=0x31 pin1=2 pin2=0

testing the IO APIC.......................

.................................... done.

Using local APIC timer interrupts.

calibrating APIC timer ...

..... CPU clock speed is 2665.0453 MHz.

..... host bus clock speed is 133.0272 MHz.

checking TSC synchronization across 2 CPUs: passed.

Brought up 2 CPUs

checking if image is initramfs...it isn't (no cpio magic); looks like an initrd

Freeing initrd memory: 125k freed

NET: Registered protocol family 16

PCI: Using configuration type 1

mtrr: v2.0 (20020519)

SCSI subsystem initialized

PCI: Probing PCI hardware

PCI: Probing PCI hardware (bus 00)

PCI: Transparent bridge - 0000:00:1e.0

PCI: Using IRQ router PIIX/ICH [8086/2480] at 0000:00:1f.0

PCI->APIC IRQ transform: (B0,I29,P0) -> 16

PCI->APIC IRQ transform: (B0,I31,P0) -> 18

PCI->APIC IRQ transform: (B0,I31,P1) -> 17

PCI->APIC IRQ transform: (B7,I1,P0) -> 48

PCI->APIC IRQ transform: (B7,I1,P1) -> 49

PCI->APIC IRQ transform: (B6,I3,P0) -> 24

PCI->APIC IRQ transform: (B3,I3,P0) -> 72

PCI->APIC IRQ transform: (B1,I1,P0) -> 19

PCI->APIC IRQ transform: (B1,I2,P0) -> 18

PCI->APIC IRQ transform: (B1,I3,P0) -> 18

Machine check exception polling timer started.

IA-32 Microcode Update Driver: v1.13 <tigran@veritas.com>

apm: BIOS not found.

Starting balanced_irq

highmem bounce pool size: 64 pages

VFS: Disk quotas dquot_6.5.1

Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

Installing knfsd (copyright (C) 1996 okir@monad.swb.de).

NTFS driver 2.1.14 [Flags: R/O].

udf: registering filesystem

Real Time Clock Driver v1.12

hw_random: RNG not detected

Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled

ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

Using anticipatory io scheduler

Floppy drive(s): fd0 is 1.44M

FDC 0 is a post-1991 82077

RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize

loop: loaded (max 8 devices)

Intel(R) PRO/1000 Network Driver - version 5.2.52-k4

Copyright (c) 1999-2004 Intel Corporation.

e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection

e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection

e100: Intel(R) PRO/100 Network Driver, 3.0.18

e100: Copyright(c) 1999-2004 Intel Corporation

e100: eth2: e100_probe: addr 0xfd4fd000, irq 19, MAC addr 00:E0:81:27:B9:41

ns83820.c: National Semiconductor DP83820 10/100/1000 driver.

forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.25.

8139too Fast Ethernet driver 0.9.27

eth3: RealTek RTL8139 at 0xf885ec00, fe:00:00:41:05:8b, IRQ 18

Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

ICH3: IDE controller at PCI slot 0000:00:1f.1

PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)

ICH3: chipset revision 2

ICH3: not 100% native mode: will probe irqs later

    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:DMA

    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio

hda: TEAC CD-552E, ATAPI CD/DVD-ROM drive

hdb: Maxtor 6Y120P0, ATA DISK drive

ide0 at 0x1f0-0x1f7,0x3f6 on irq 14

hdb: max request size: 128KiB

hdb: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(100)

 hdb: hdb1 hdb2

hda: ATAPI 52X CD-ROM drive, 128kB Cache, UDMA(33)

Uniform CD-ROM driver Revision: 3.20

mice: PS/2 mouse device common for all mice

serio: i8042 AUX port at 0x60,0x64 irq 12

serio: i8042 KBD port at 0x60,0x64 irq 1

input: AT Translated Set 2 keyboard on isa0060/serio0

NET: Registered protocol family 2

IP: routing cache hash table of 4096 buckets, 64Kbytes

TCP: Hash tables configured (established 131072 bind 43690)

ip_conntrack version 2.1 (8191 buckets, 65528 max) - 168 bytes per conntrack

ip_tables: (C) 2000-2002 Netfilter core team

NET: Registered protocol family 1

NET: Registered protocol family 17

Ebtables v2.0 registered

RAMDISK: Compressed image found at block 0

VFS: Mounted root (ext2 filesystem).

Red Hat nash ver3ware Storage Controller device driver for Linux v1.26.00.039.

sion 3.5.22 starting
Mounted /proc filesystem
Mounting sysfs
Loading 3w-xxxx.ko module
scsi0 : Found a 3ware Storage Controller at 0xc800, IRQ: 72, P-chip: 1.3

scsi0 : 3ware Storage Controller

  Vendor: 3ware     Model: Logical Disk 0    Rev: 1.2 

  Type:   Direct-Access                      ANSI SCSI revision: 00

SCSI device sda: 480239104 512-byte hdwr sectors (245882 MB)

SCSI device sda: drive cache: write back

 sda: sda1 sda2 sda3 < sda5 >

Attached scsi disk sda at scsi0, channel 0, id 0, lun 0

Creating block devices
Creating root device
Mounting root filesystem
kjournald starting.  Commit interval 5 seconds

EXT3-fs: mounted filesystem with ordered data mode.

Freeing unused kernel memory: 408k freed


INIT: version 2.85 booting 		Welcome to Fedora Core
		Press 'I' to enter interactive startup.
