Linux version 2.4.26 (root@filer11.local) (gcc version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)) #3 SMP Sun Aug 15 02:02:28 CEST 2004

BIOS-provided physical RAM map:

 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)

 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)

 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)

 BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)

 BIOS-e820: 000000003fff0000 - 000000003ffff000 (ACPI data)

 BIOS-e820: 000000003ffff000 - 0000000040000000 (ACPI NVS)

 BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)

 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)

 BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)

Warning only 896MB will be used.

Use a HIGHMEM enabled kernel.

896MB LOWMEM available.

found SMP MP-table at 000ff780

hm, page 000ff000 reserved twice.

hm, page 00100000 reserved twice.

hm, page 000f9000 reserved twice.

hm, page 000fa000 reserved twice.

On node 0 totalpages: 229376

zone(0): 4096 pages.

zone(1): 225280 pages.

zone(2): 0 pages.

ACPI: RSDP (v000 ACPIAM                                    ) @ 0x000f4fa0

ACPI: RSDT (v001 A M I  OEMRSDT  0x02000304 MSFT 0x00000097) @ 0x3fff0000

ACPI: FADT (v002 A M I  OEMFACP  0x02000304 MSFT 0x00000097) @ 0x3fff0200

ACPI: MADT (v001 A M I  OEMAPIC  0x02000304 MSFT 0x00000097) @ 0x3fff0300

ACPI: OEMB (v001 A M I  OEMBIOS  0x02000304 MSFT 0x00000097) @ 0x3ffff040

ACPI: DSDT (v001  0ABBP 0ABBP000 0x00000000 INTL 0x02002026) @ 0x00000000

ACPI: Local APIC address 0xfee00000

ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)

Processor #0 Pentium 4(tm) XEON(tm) APIC version 20

ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)

Processor #6 Pentium 4(tm) XEON(tm) APIC version 20

ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)

Processor #130 invalid (max 16)

ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)

Processor #131 invalid (max 16)

Using ACPI for processor (LAPIC) configuration information

Intel MultiProcessor Specification v1.4

    Virtual Wire compatibility mode.

OEM ID: INTEL    Product ID: KingsCanyonC APIC at: 0xFEE00000

I/O APIC #7 Version 32 at 0xFEC00000.

I/O APIC #8 Version 32 at 0xFEC80000.

I/O APIC #9 Version 32 at 0xFEC80400.

I/O APIC #10 Version 32 at 0xFEC81000.

I/O APIC #11 Version 32 at 0xFEC81400.

Enabling APIC mode: Flat.	Using 5 I/O APICs

Processors: 2

Kernel command line: ro root=/dev/hdb1 console=ttyS0,115200n8

Initializing CPU#0

Detected 2665.939 MHz processor.

Console: colour VGA+ 80x25

Calibrating delay loop... 5321.52 BogoMIPS

Memory: 904192k/917504k available (1711k kernel code, 12924k reserved, 406k data, 308k init, 0k highmem)

Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)

Inode cache hash table entries: 65536 (order: 7, 524288 bytes)

Mount cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)

Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)

CPU: Trace cache: 12K uops, L1 D cache: 8K

CPU: L2 cache: 512K

CPU: Hyper-Threading is disabled

Intel machine check architecture supported.

Intel machine check reporting enabled on CPU#0.

Enabling fast FPU save and restore... done.

Enabling unmasked SIMD FPU exception support... done.

Checking 'hlt' instruction... OK.

POSIX conformance testing by UNIFIX

mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)

mtrr: detected mtrr type: Intel

CPU: Trace cache: 12K uops, L1 D cache: 8K

CPU: L2 cache: 512K

CPU: Hyper-Threading is disabled

Intel machine check reporting enabled on CPU#0.

CPU0: Intel(R) Xeon(TM) CPU 2.66GHz stepping 05

per-CPU timeslice cutoff: 1463.11 usecs.

enabled ExtINT on CPU#0

ESR value before enabling vector: 00000000

ESR value after enabling vector: 00000000

Booting processor 1/6 eip 2000

Initializing CPU#1

masked ExtINT on CPU#1

ESR value before enabling vector: 00000000

ESR value after enabling vector: 00000000

Calibrating delay loop... 5321.52 BogoMIPS

CPU: Trace cache: 12K uops, L1 D cache: 8K

CPU: L2 cache: 512K

CPU: Hyper-Threading is disabled

Intel machine check reporting enabled on CPU#1.

CPU1: Intel(R) Xeon(TM) CPU 2.66GHz stepping 05

Total of 2 processors activated (10643.04 BogoMIPS).

ENABLING IO-APIC IRQs

Setting 7 in the phys_id_present_map

...changing IO-APIC physical APIC ID to 7 ... ok.

Setting 8 in the phys_id_present_map

...changing IO-APIC physical APIC ID to 8 ... ok.

Setting 9 in the phys_id_present_map

...changing IO-APIC physical APIC ID to 9 ... ok.

Setting 10 in the phys_id_present_map

...changing IO-APIC physical APIC ID to 10 ... ok.

Setting 11 in the phys_id_present_map

...changing IO-APIC physical APIC ID to 11 ... ok.

..TIMER: vector=0x31 pin1=2 pin2=0

testing the IO APIC.......................






.................................... done.

Using local APIC timer interrupts.

calibrating APIC timer ...

..... CPU clock speed is 2665.8416 MHz.

..... host bus clock speed is 133.2918 MHz.

cpu: 0, clocks: 1332918, slice: 444306

CPU0<T0:1332912,T1:888592,D:14,S:444306,C:1332918>

cpu: 1, clocks: 1332918, slice: 444306

CPU1<T0:1332912,T1:444288,D:12,S:444306,C:1332918>

checking TSC synchronization across CPUs: passed.

Waiting on wait_init_idle (map = 0x2)

All processors have done init_idle

PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=7

PCI: Using configuration type 1

PCI: Probing PCI hardware

PCI: Probing PCI hardware (bus 00)

PCI: Ignoring BAR0-3 of IDE controller 00:1f.1

Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge

PCI: Using IRQ router PIIX/ICH [8086/2480] at 00:1f.0

PCI->APIC IRQ transform: (B0,I29,P0) -> 16

PCI->APIC IRQ transform: (B0,I31,P0) -> 18

PCI->APIC IRQ transform: (B0,I31,P1) -> 17

PCI->APIC IRQ transform: (B7,I1,P0) -> 48

PCI->APIC IRQ transform: (B7,I1,P1) -> 49

PCI->APIC IRQ transform: (B6,I3,P0) -> 24

PCI->APIC IRQ transform: (B3,I3,P0) -> 72

PCI->APIC IRQ transform: (B1,I1,P0) -> 19

PCI->APIC IRQ transform: (B1,I2,P0) -> 18

PCI->APIC IRQ transform: (B1,I3,P0) -> 18

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>

apm: BIOS not found.

Starting kswapd

Journalled Block Device driver loaded

Installing knfsd (copyright (C) 1996 okir@monad.swb.de).

NTFS driver v1.1.22 [Flags: R/O]

udf: registering filesystem

Detected PS/2 Mouse Port.

pty: 256 Unix98 ptys configured

Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled

ttyS00 at 0x03f8 (irq = 4) is a 16550A

Real Time Clock Driver v1.10f

i810_rng: RNG not detected

hw_random: RNG not detected

amd76x_pm: Version 20020730

amd76x_pm: Could not find northbridge

Floppy drive(s): fd0 is 1.44M

FDC 0 is a post-1991 82077

RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize

loop: loaded (max 8 devices)

Intel(R) PRO/1000 Network Driver - version 5.2.30.1-k1

Copyright (c) 1999-2004 Intel Corporation.

eth0: Intel(R) PRO/1000 Network Connection

eth1: Intel(R) PRO/1000 Network Connection

eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html

eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others

eth2: Intel Corp. 82557/8/9 [Ethernet Pro 100], 00:E0:81:27:B9:41, IRQ 19.

  Board assembly 567812-052, Physical connectors present: RJ45

  Primary interface chip i82555 PHY #1.

  General self-test: passed.

  Serial sub-system self-test: passed.

  Internal registers self-test: passed.

  ROM checksum self-test: passed (0xd0a6c714).

ns83820.c: National Semiconductor DP83820 10/100/1000 driver.

forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.25.

8139too Fast Ethernet driver 0.9.26

eth3: RealTek RTL8139 at 0xf885ec00, fe:00:00:41:05:8b, IRQ 18

Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4

ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

ICH3: IDE controller at PCI slot 00:1f.1

PCI: Enabling device 00:1f.1 (0005 -> 0007)

ICH3: chipset revision 2

ICH3: not 100% native mode: will probe irqs later

    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:DMA

    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio

hda: TEAC CD-552E, ATAPI CD/DVD-ROM drive

hdb: Maxtor 6Y120P0, ATA DISK drive

blk: queue c03baf88, I/O limit 4095Mb (mask 0xffffffff)

ide0 at 0x1f0-0x1f7,0x3f6 on irq 14

hdb: attached ide-disk driver.

hdb: host protected area => 1

hdb: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=3531201/4/17, UDMA(100)

hda: attached ide-cdrom driver.

hda: ATAPI 52X CD-ROM drive, 128kB Cache, UDMA(33)

Uniform CD-ROM driver Revision: 3.12

Partition check:

 hdb: hdb1 hdb2

SCSI subsystem driver Revision: 1.00

3ware Storage Controller device driver for Linux v1.02.00.037.

scsi0 : Found a 3ware Storage Controller at 0xc800, IRQ: 72, P-chip: 1.3

scsi0 : 3ware Storage Controller

  Vendor: 3ware     Model: Logical Disk 0    Rev: 1.0 

  Type:   Direct-Access                      ANSI SCSI revision: 00

Attached scsi disk sda at scsi0, channel 0, id 0, lun 0

SCSI device sda: 480239104 512-byte hdwr sectors (245882 MB)

 sda: sda1 sda2 sda3 < sda5 >

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP

IP: routing cache hash table of 8192 buckets, 64Kbytes

TCP: Hash tables configured (established 262144 bind 65536)

ip_conntrack version 2.1 (7168 buckets, 57344 max) - 152 bytes per conntrack

ip_tables: (C) 2000-2002 Netfilter core team

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

RAMDISK: Compressed image found at block 0

Freeing initrd memory: 111k freed

VFS: Mounted root (ext2 filesystem).

Red Hat nash version 3.5.22 starting
Mounted /proc filesystem
kjournald starting.  Commit interval 5 seconds

Mounting sysfs
EXT3-fs: mounted filesystem with ordered data mode.

mount: error 19 mounting sysfs
Creating block devices
Creating root device
umount /sys failed: 22
Mounting root filesystem
Freeing unused kernel memory: 308k freed


INIT: version 2.85 booting 		Welcome to Fedora Core
		Press 'I' to enter interactive startup.
