[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] Problems booting on a Dual-Xeon with 2.4 and 2.6 kernels



Ok, here are the outputs:

1.) the config diffs (I can not garantee any more that this is an orginal 
.config,
     because I now already tried some things to make it perhaps work..., 
however it's still
     CONFIG_NOHIGHMEM=y ?!):
2.) Output of lspci -v
3.) Output of lspci -vv

I also included these files as an attachment

>> P.S.: As I was using the newest CSets (1.1183) SMP was disabled in the
>kernel configs, while
>>         I was booting on the Dual-Xeon machine.
>yes, and that's how it's supposed to be:  Domain kernels cannot use
>multiple CPUs but Xen has support for SMP, and if you run multiple
>domains, you can have each run on a different CPUs.
Yes, Ian has explained that to me ;-) I just wanted to say that I did not
try any tricks with the config files of the new CSets to make SMP "work"
again... ;-)

1.):

--- linux-2.6.7-xen0/.config    2004-08-09 22:41:11.000000000 +0200
+++ linux-2.6.7-xen-sparse/arch/xen/configs/xen0_defconfig      2004-08-09 
21:43:46.000000000 +0200
@@ -62,6 +62,11 @@
 CONFIG_MMU=y
 CONFIG_UID16=y
 CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_M386 is not set
+# CONFIG_M486 is not set
+# CONFIG_M586 is not set
+# CONFIG_M586TSC is not set
+# CONFIG_M586MMX is not set
 # CONFIG_M686 is not set
 # CONFIG_MPENTIUMII is not set
 # CONFIG_MPENTIUMIII is not set
@@ -71,6 +76,9 @@
 # CONFIG_MK7 is not set
 # CONFIG_MK8 is not set
 # CONFIG_MCRUSOE is not set
+# CONFIG_MWINCHIPC6 is not set
+# CONFIG_MWINCHIP2 is not set
+# CONFIG_MWINCHIP3D is not set
 # CONFIG_MCYRIXIII is not set
 # CONFIG_MVIAC3_2 is not set
 # CONFIG_X86_GENERIC is not set
@@ -97,6 +105,7 @@
 # CONFIG_EDD is not set
 CONFIG_NOHIGHMEM=y
 # CONFIG_HIGHMEM4G is not set
+# CONFIG_HIGHMEM64G is not set
 CONFIG_HAVE_DEC_LOCK=y
 # CONFIG_REGPARM is not set

@@ -238,7 +247,7 @@
 # CONFIG_CHR_DEV_ST is not set
 # CONFIG_CHR_DEV_OSST is not set
 # CONFIG_BLK_DEV_SR is not set
-CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SG is not set

 #
 # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -261,16 +270,38 @@
 # CONFIG_SCSI_ACARD is not set
 # CONFIG_SCSI_AHA152X is not set
 # CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
+CONFIG_SCSI_AACRAID=y
+CONFIG_SCSI_AIC7XXX=y
+CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
+CONFIG_AIC7XXX_RESET_DELAY_MS=15000
+# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
+CONFIG_AIC7XXX_DEBUG_ENABLE=y
+CONFIG_AIC7XXX_DEBUG_MASK=0
+CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
+CONFIG_SCSI_AIC79XX=y
+CONFIG_AIC79XX_CMDS_PER_DEVICE=32
+CONFIG_AIC79XX_RESET_DELAY_MS=15000
+# CONFIG_AIC79XX_BUILD_FIRMWARE is not set
+# CONFIG_AIC79XX_ENABLE_RD_STRM is not set
+CONFIG_AIC79XX_DEBUG_ENABLE=y
+CONFIG_AIC79XX_DEBUG_MASK=0
+CONFIG_AIC79XX_REG_PRETTY_PRINT=y
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_MEGARAID is not set
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
+CONFIG_SCSI_MEGARAID=y
+CONFIG_SCSI_SATA=y
+# CONFIG_SCSI_SATA_SVW is not set
+CONFIG_SCSI_ATA_PIIX=y
+CONFIG_SCSI_SATA_PROMISE=y
+CONFIG_SCSI_SATA_SX4=y
+CONFIG_SCSI_SATA_SIL=y
+# CONFIG_SCSI_SATA_SIS is not set
+# CONFIG_SCSI_SATA_VIA is not set
+# CONFIG_SCSI_SATA_VITESSE is not set
+CONFIG_SCSI_BUSLOGIC=y
+# CONFIG_SCSI_OMIT_FLASHPOINT is not set
 # CONFIG_SCSI_CPQFCTS is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_DTC3280 is not set

2.):

00:00.0 Host bridge: Intel Corp. E7501 Memory Controller Hub (rev 01)
        Flags: bus master, fast devsel, latency 0
        Capabilities: [40] #09 [1105]

00:02.0 PCI bridge: Intel Corp. E7000 Series Hub Interface B PCI-to-PCI Bridge 
(rev 01) (prog-if 00 [Normal decode])
        Flags: bus master, 66Mhz, fast devsel, latency 64
        Bus: primary=00, secondary=05, subordinate=07, sec-latency=0
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: fe800000-feafffff
        Prefetchable memory behind bridge: ff700000-ff9fffff
        Expansion ROM at 0000d000 [disabled] [size=4K]

00:03.0 PCI bridge: Intel Corp. E7000 Series Hub Interface C PCI-to-PCI Bridge 
(rev 01) (prog-if 00 [Normal decode])
        Flags: bus master, 66Mhz, fast devsel, latency 64
        Bus: primary=00, secondary=02, subordinate=04, sec-latency=0
        I/O behind bridge: 0000b000-0000cfff
        Memory behind bridge: fc500000-fe7fffff
        Prefetchable memory behind bridge: ff400000-ff6fffff
        Expansion ROM at 0000b000 [disabled] [size=8K]

00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 02) (prog-if 
00 [UHCI])
        Subsystem: Intel Corp.: Unknown device 2480
        Flags: bus master, medium devsel, latency 0, IRQ 16
        I/O ports at e800 [size=32]

00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub interface to PCI Bridge 
(rev 42) (prog-if 00 [Normal decode])
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        I/O behind bridge: 00009000-0000afff
        Memory behind bridge: fa400000-fc4fffff
        Prefetchable memory behind bridge: ff300000-ff3fffff

00:1f.0 ISA bridge: Intel Corp. 82801CA LPC Interface Controller (rev 02)
        Flags: bus master, medium devsel, latency 0

00:1f.1 IDE interface: Intel Corp. 82801CA Ultra ATA Storage Controller (rev 
02) (prog-if 8a [Master SecP PriP])
        Subsystem: Intel Corp.: Unknown device 2480
        Flags: bus master, medium devsel, latency 0, IRQ 18
        I/O ports at <unassigned>
        I/O ports at <unassigned>
        I/O ports at <unassigned>
        I/O ports at <unassigned>
        I/O ports at ffa0 [size=16]
        Memory at 40000000 (32-bit, non-prefetchable) [size=1K]

00:1f.3 SMBus: Intel Corp. 82801CA/CAM SMBus Controller (rev 02)
        Subsystem: Intel Corp.: Unknown device 2480
        Flags: medium devsel, IRQ 17
        I/O ports at 0540 [size=32]

01:01.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 10)
        Subsystem: Intel Corp. EtherExpress PRO/100 S Server Adapter
        Flags: bus master, medium devsel, latency 64, IRQ 19
        Memory at fc4fd000 (32-bit, non-prefetchable)
        I/O ports at a000 [size=64]
        Memory at fc4a0000 (32-bit, non-prefetchable) [size=128K]
        Capabilities: [dc] Power Management version 2

01:02.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) 
(prog-if 00 [VGA])
        Subsystem: ATI Technologies Inc Rage XL
        Flags: bus master, stepping, medium devsel, latency 64, IRQ 18
        Memory at fb000000 (32-bit, non-prefetchable) [size=fc4c0000]
        I/O ports at a800 [size=256]
        Memory at fc4ff000 (32-bit, non-prefetchable) [size=4K]
        Expansion ROM at 00020000 [disabled]
        Capabilities: [5c] Power Management version 2

01:03.0 Ethernet controller: Peppercon AG ROL/F-100 Fast Ethernet Adapter with 
ROL (rev 10)
        Subsystem: Realtek Semiconductor Co., Ltd.: Unknown device 8139
        Flags: bus master, medium devsel, latency 64, IRQ 18
        I/O ports at a400 [size=fc4e0000]
        Memory at fc4fec00 (32-bit, non-prefetchable) [size=256]
        Expansion ROM at 00010000 [disabled]
        Capabilities: [50] Power Management version 2

02:1c.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04) (prog-if 20 
[IO(X)-APIC])
        Subsystem: Intel Corp. 82870P2 P64H2 I/OxAPIC
        Flags: bus master, 66Mhz, fast devsel, latency 0
        Memory at fe7fe000 (32-bit, non-prefetchable)
        Capabilities: [50] PCI-X non-bridge device.

02:1d.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 04) (prog-if 
00 [Normal decode])
        Flags: bus master, 66Mhz, fast devsel, latency 64
        Bus: primary=02, secondary=04, subordinate=04, sec-latency=64
        I/O behind bridge: 0000c000-0000cfff
        Memory behind bridge: fd600000-fe6fffff
        Prefetchable memory behind bridge: 00000000ff500000-00000000ff500000
        Expansion ROM at 0000c000 [disabled] [size=4K]
        Capabilities: [50] PCI-X bridge device.

02:1e.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04) (prog-if 20 
[IO(X)-APIC])
        Subsystem: Intel Corp. 82870P2 P64H2 I/OxAPIC
        Flags: bus master, 66Mhz, fast devsel, latency 0
        Memory at fe7ff000 (32-bit, non-prefetchable)
        Capabilities: [50] PCI-X non-bridge device.

02:1f.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 04) (prog-if 
00 [Normal decode])
        Flags: bus master, 66Mhz, fast devsel, latency 64
        Bus: primary=02, secondary=03, subordinate=03, sec-latency=64
        I/O behind bridge: 0000b000-0000bfff
        Memory behind bridge: fc500000-fd5fffff
        Prefetchable memory behind bridge: 00000000ff400000-00000000ff400000
        Expansion ROM at 0000b000 [disabled] [size=4K]
        Capabilities: [50] PCI-X bridge device.

03:03.0 RAID bus controller: 3ware Inc 3ware 7000-series ATA-RAID (rev 01)
        Subsystem: 3ware Inc 3ware 7000-series ATA-RAID
        Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 72
        I/O ports at b800 [size=fd5e0000]
        Memory at fd5ffc00 (32-bit, non-prefetchable) [size=16]
        Memory at fc800000 (32-bit, non-prefetchable) [size=8M]
        Expansion ROM at 00010000 [disabled]
        Capabilities: [40] Power Management version 1

04:03.0 RAID bus controller: 3ware Inc 3ware 7000-series ATA-RAID (rev 01)
        Subsystem: 3ware Inc 3ware 7000-series ATA-RAID
        Flags: bus master, medium devsel, latency 64, IRQ 96
        I/O ports at c800 [size=fe6e0000]
        Memory at fe6ffc00 (32-bit, non-prefetchable) [size=16]
        Memory at fd800000 (32-bit, non-prefetchable) [size=8M]
        Expansion ROM at 00010000 [disabled]
        Capabilities: [40] Power Management version 1

05:1c.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04) (prog-if 20 
[IO(X)-APIC])
        Subsystem: Intel Corp. 82870P2 P64H2 I/OxAPIC
        Flags: bus master, 66Mhz, fast devsel, latency 0
        Memory at feafe000 (32-bit, non-prefetchable)
        Capabilities: [50] PCI-X non-bridge device.

05:1d.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 04) (prog-if 
00 [Normal decode])
        Flags: bus master, 66Mhz, fast devsel, latency 64
        Bus: primary=05, secondary=07, subordinate=07, sec-latency=64
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: fe900000-fe9fffff
        Prefetchable memory behind bridge: 00000000ff800000-00000000ff800000
        Expansion ROM at 0000d000 [disabled] [size=4K]
        Capabilities: [50] PCI-X bridge device.

05:1e.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04) (prog-if 20 
[IO(X)-APIC])
        Subsystem: Intel Corp. 82870P2 P64H2 I/OxAPIC
        Flags: bus master, 66Mhz, fast devsel, latency 0
        Memory at feaff000 (32-bit, non-prefetchable)
        Capabilities: [50] PCI-X non-bridge device.

05:1f.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 04) (prog-if 
00 [Normal decode])
        Flags: bus master, 66Mhz, fast devsel, latency 64
        Bus: primary=05, secondary=06, subordinate=06, sec-latency=64
        Memory behind bridge: fe800000-fe8fffff
        Prefetchable memory behind bridge: 00000000ff700000-00000000ff700000
        Capabilities: [50] PCI-X bridge device.

06:03.0 FireWire (IEEE 1394): NEC Corporation IEEE 1394 Host Controller (rev 
01) (prog-if 10 [OHCI])
        Subsystem: NEC Corporation: Unknown device 00ce
        Flags: bus master, medium devsel, latency 64, IRQ 24
        Memory at fe8ff000 (32-bit, non-prefetchable)
        Capabilities: [60] Power Management version 2

07:01.0 Ethernet controller: Intel Corp. 82546EB Gigabit Ethernet Controller 
(Copper) (rev 01)
        Subsystem: Intel Corp. PRO/1000 MT Dual Port Server Adapter
        Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 48
        Memory at fe9a0000 (64-bit, non-prefetchable)
        I/O ports at d400 [size=64]
        Capabilities: [dc] Power Management version 2
        Capabilities: [e4] PCI-X non-bridge device.
        Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0 
Enable-

07:01.1 Ethernet controller: Intel Corp. 82546EB Gigabit Ethernet Controller 
(Copper) (rev 01)
        Subsystem: Intel Corp. PRO/1000 MT Dual Port Server Adapter
        Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 49
        Memory at fe9e0000 (64-bit, non-prefetchable)
        I/O ports at d800 [size=64]
        Capabilities: [dc] Power Management version 2
        Capabilities: [e4] PCI-X non-bridge device.
        Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0 
Enable-

3.):

00:00.0 Host bridge: Intel Corp. E7501 Memory Controller Hub (rev 01)
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 0
        Capabilities: [40] #09 [1105]

00:02.0 PCI bridge: Intel Corp. E7000 Series Hub Interface B PCI-to-PCI Bridge 
(rev 01) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 64
        Bus: primary=00, secondary=05, subordinate=07, sec-latency=0
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: fe800000-feafffff
        Prefetchable memory behind bridge: ff700000-ff9fffff
        Expansion ROM at 0000d000 [disabled] [size=4K]
        BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-

00:03.0 PCI bridge: Intel Corp. E7000 Series Hub Interface C PCI-to-PCI Bridge 
(rev 01) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 64
        Bus: primary=00, secondary=02, subordinate=04, sec-latency=0
        I/O behind bridge: 0000b000-0000cfff
        Memory behind bridge: fc500000-fe7fffff
        Prefetchable memory behind bridge: ff400000-ff6fffff
        Expansion ROM at 0000b000 [disabled] [size=8K]
        BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-

00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 02) (prog-if 
00 [UHCI])
        Subsystem: Intel Corp.: Unknown device 2480
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 4: I/O ports at e800 [size=32]

00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub interface to PCI Bridge 
(rev 42) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        I/O behind bridge: 00009000-0000afff
        Memory behind bridge: fa400000-fc4fffff
        Prefetchable memory behind bridge: ff300000-ff3fffff
        BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-

00:1f.0 ISA bridge: Intel Corp. 82801CA LPC Interface Controller (rev 02)
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0

00:1f.1 IDE interface: Intel Corp. 82801CA Ultra ATA Storage Controller (rev 
02) (prog-if 8a [Master SecP PriP])
        Subsystem: Intel Corp.: Unknown device 2480
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 18
        Region 0: I/O ports at <unassigned>
        Region 1: I/O ports at <unassigned>
        Region 2: I/O ports at <unassigned>
        Region 3: I/O ports at <unassigned>
        Region 4: I/O ports at ffa0 [size=16]
        Region 5: Memory at 40000000 (32-bit, non-prefetchable) [size=1K]

00:1f.3 SMBus: Intel Corp. 82801CA/CAM SMBus Controller (rev 02)
        Subsystem: Intel Corp.: Unknown device 2480
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin B routed to IRQ 17
        Region 4: I/O ports at 0540 [size=32]

01:01.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 10)
        Subsystem: Intel Corp. EtherExpress PRO/100 S Server Adapter
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (2000ns min, 14000ns max), Cache Line Size 10
        Interrupt: pin A routed to IRQ 19
        Region 0: Memory at fc4fd000 (32-bit, non-prefetchable)
        Region 1: I/O ports at a000 [size=64]
        Region 2: Memory at fc4a0000 (32-bit, non-prefetchable) [size=128K]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

01:02.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) 
(prog-if 00 [VGA])
        Subsystem: ATI Technologies Inc Rage XL
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping+ SERR- FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (2000ns min), Cache Line Size 10
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=fc4c0000]
        Region 1: I/O ports at a800 [size=256]
        Region 2: Memory at fc4ff000 (32-bit, non-prefetchable) [size=4K]
        Expansion ROM at 00020000 [disabled]
        Capabilities: [5c] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:03.0 Ethernet controller: Peppercon AG ROL/F-100 Fast Ethernet Adapter with 
ROL (rev 10)
        Subsystem: Realtek Semiconductor Co., Ltd.: Unknown device 8139
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (8000ns min, 16000ns max)
        Interrupt: pin A routed to IRQ 18
        Region 0: I/O ports at a400 [size=fc4e0000]
        Region 1: Memory at fc4fec00 (32-bit, non-prefetchable) [size=256]
        Expansion ROM at 00010000 [disabled]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:1c.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04) (prog-if 20 
[IO(X)-APIC])
        Subsystem: Intel Corp. 82870P2 P64H2 I/OxAPIC
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 0
        Region 0: Memory at fe7fe000 (32-bit, non-prefetchable)
        Capabilities: [50] PCI-X non-bridge device.
                Command: DPERE- ERO- RBC=0 OST=0
                Status: Bus=2 Dev=28 Func=0 64bit+ 133MHz+ SCD- USC-, 
DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-

02:1d.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 04) (prog-if 
00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 64, Cache Line Size 10
        Bus: primary=02, secondary=04, subordinate=04, sec-latency=64
        I/O behind bridge: 0000c000-0000cfff
        Memory behind bridge: fd600000-fe6fffff
        Prefetchable memory behind bridge: 00000000ff500000-00000000ff500000
        Expansion ROM at 0000c000 [disabled] [size=4K]
        BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
        Capabilities: [50] PCI-X bridge device.
                Secondary Status: 64bit+, 133MHz+, SCD-, USC-, SCO-, SRD- Freq=0
                Status: Bus=2 Dev=29 Func=0 64bit+ 133MHz+ SCD- USC-, SCO-, SRD-
                : Upstream: Capacity=65535, Commitment Limit=65535
                : Downstream: Capacity=65535, Commitment Limit=65535

02:1e.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04) (prog-if 20 
[IO(X)-APIC])
        Subsystem: Intel Corp. 82870P2 P64H2 I/OxAPIC
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 0
        Region 0: Memory at fe7ff000 (32-bit, non-prefetchable)
        Capabilities: [50] PCI-X non-bridge device.
                Command: DPERE- ERO- RBC=0 OST=0
                Status: Bus=2 Dev=30 Func=0 64bit+ 133MHz+ SCD- USC-, 
DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-

02:1f.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 04) (prog-if 
00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 64, Cache Line Size 10
        Bus: primary=02, secondary=03, subordinate=03, sec-latency=64
        I/O behind bridge: 0000b000-0000bfff
        Memory behind bridge: fc500000-fd5fffff
        Prefetchable memory behind bridge: 00000000ff400000-00000000ff400000
        Expansion ROM at 0000b000 [disabled] [size=4K]
        BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
        Capabilities: [50] PCI-X bridge device.
                Secondary Status: 64bit+, 133MHz+, SCD-, USC-, SCO-, SRD- Freq=0
                Status: Bus=2 Dev=31 Func=0 64bit+ 133MHz+ SCD- USC-, SCO-, SRD-
                : Upstream: Capacity=65535, Commitment Limit=65535
                : Downstream: Capacity=65535, Commitment Limit=65535

03:03.0 RAID bus controller: 3ware Inc 3ware 7000-series ATA-RAID (rev 01)
        Subsystem: 3ware Inc 3ware 7000-series ATA-RAID
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (2250ns min), Cache Line Size 10
        Interrupt: pin A routed to IRQ 72
        Region 0: I/O ports at b800 [size=fd5e0000]
        Region 1: Memory at fd5ffc00 (32-bit, non-prefetchable) [size=16]
        Region 2: Memory at fc800000 (32-bit, non-prefetchable) [size=8M]
        Expansion ROM at 00010000 [disabled]
        Capabilities: [40] Power Management version 1
                Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

04:03.0 RAID bus controller: 3ware Inc 3ware 7000-series ATA-RAID (rev 01)
        Subsystem: 3ware Inc 3ware 7000-series ATA-RAID
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (2250ns min), Cache Line Size 10
        Interrupt: pin A routed to IRQ 96
        Region 0: I/O ports at c800 [size=fe6e0000]
        Region 1: Memory at fe6ffc00 (32-bit, non-prefetchable) [size=16]
        Region 2: Memory at fd800000 (32-bit, non-prefetchable) [size=8M]
        Expansion ROM at 00010000 [disabled]
        Capabilities: [40] Power Management version 1
                Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

05:1c.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04) (prog-if 20 
[IO(X)-APIC])
        Subsystem: Intel Corp. 82870P2 P64H2 I/OxAPIC
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 0
        Region 0: Memory at feafe000 (32-bit, non-prefetchable)
        Capabilities: [50] PCI-X non-bridge device.
                Command: DPERE- ERO- RBC=0 OST=0
                Status: Bus=5 Dev=28 Func=0 64bit+ 133MHz+ SCD- USC-, 
DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-

05:1d.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 04) (prog-if 
00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 64, Cache Line Size 10
        Bus: primary=05, secondary=07, subordinate=07, sec-latency=64
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: fe900000-fe9fffff
        Prefetchable memory behind bridge: 00000000ff800000-00000000ff800000
        Expansion ROM at 0000d000 [disabled] [size=4K]
        BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
        Capabilities: [50] PCI-X bridge device.
                Secondary Status: 64bit+, 133MHz+, SCD-, USC-, SCO-, SRD- Freq=3
                Status: Bus=5 Dev=29 Func=0 64bit+ 133MHz+ SCD- USC-, SCO-, SRD-
                : Upstream: Capacity=65535, Commitment Limit=65535
                : Downstream: Capacity=65535, Commitment Limit=65535

05:1e.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04) (prog-if 20 
[IO(X)-APIC])
        Subsystem: Intel Corp. 82870P2 P64H2 I/OxAPIC
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 0
        Region 0: Memory at feaff000 (32-bit, non-prefetchable)
        Capabilities: [50] PCI-X non-bridge device.
                Command: DPERE- ERO- RBC=0 OST=0
                Status: Bus=5 Dev=30 Func=0 64bit+ 133MHz+ SCD- USC-, 
DC=simple, DMMRBC=0, DMOST=0, DMCRS=0, RSCEM-

05:1f.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 04) (prog-if 
00 [Normal decode])
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 64, Cache Line Size 10
        Bus: primary=05, secondary=06, subordinate=06, sec-latency=64
        Memory behind bridge: fe800000-fe8fffff
        Prefetchable memory behind bridge: 00000000ff700000-00000000ff700000
        BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
        Capabilities: [50] PCI-X bridge device.
                Secondary Status: 64bit+, 133MHz+, SCD-, USC-, SCO-, SRD- Freq=0
                Status: Bus=5 Dev=31 Func=0 64bit+ 133MHz+ SCD- USC-, SCO-, SRD-
                : Upstream: Capacity=65535, Commitment Limit=65535
                : Downstream: Capacity=65535, Commitment Limit=65535

06:03.0 FireWire (IEEE 1394): NEC Corporation IEEE 1394 Host Controller (rev 
01) (prog-if 10 [OHCI])
        Subsystem: NEC Corporation: Unknown device 00ce
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64, Cache Line Size 10
        Interrupt: pin A routed to IRQ 24
        Region 0: Memory at fe8ff000 (32-bit, non-prefetchable)
        Capabilities: [60] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

07:01.0 Ethernet controller: Intel Corp. 82546EB Gigabit Ethernet Controller 
(Copper) (rev 01)
        Subsystem: Intel Corp. PRO/1000 MT Dual Port Server Adapter
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (63750ns min), Cache Line Size 10
        Interrupt: pin A routed to IRQ 48
        Region 0: Memory at fe9a0000 (64-bit, non-prefetchable)
        Region 4: I/O ports at d400 [size=64]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=1 PME-
        Capabilities: [e4] PCI-X non-bridge device.
                Command: DPERE- ERO+ RBC=0 OST=0
                Status: Bus=7 Dev=1 Func=0 64bit+ 133MHz+ SCD- USC-, DC=simple, 
DMMRBC=2, DMOST=0, DMCRS=1, RSCEM-
        Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0 
Enable-
                Address: 0000000000000000  Data: 0000

07:01.1 Ethernet controller: Intel Corp. 82546EB Gigabit Ethernet Controller 
(Copper) (rev 01)
        Subsystem: Intel Corp. PRO/1000 MT Dual Port Server Adapter
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (63750ns min), Cache Line Size 10
        Interrupt: pin B routed to IRQ 49
        Region 0: Memory at fe9e0000 (64-bit, non-prefetchable)
        Region 4: I/O ports at d800 [size=64]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=1 PME-
        Capabilities: [e4] PCI-X non-bridge device.
                Command: DPERE- ERO+ RBC=0 OST=0
                Status: Bus=7 Dev=1 Func=1 64bit+ 133MHz+ SCD- USC-, DC=simple, 
DMMRBC=2, DMOST=0, DMCRS=1, RSCEM-
        Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0 
Enable-
                Address: 0000000000000000  Data: 0000


HTH,
  Sven



*********** REPLY SEPARATOR  ***********

On 09.08.2004 at 22:33 Christian Limpach wrote:

>On Mon, Aug 09, 2004 at 10:45:17PM +0200, Sven Kretzschmar wrote:
>>
>> I tried to make xen work on a dual-Xeon (1 Gig RAM, 2 3ware ATA-Raid
>Controlers)
>> with both 2.4.26 and 2.6.7 kernels, but had no success :-(
>>
>> I cloned the newest repository (CSet 1.1183) in an empty dir and only
>did:
>>
>> 1.) make world
>> 2.) make linux26
>> 3.) make install
>>
>> Then during boot of the 2.6 kernel I got the following message during
>boot:
>>
>> fixmap and kmap areas overlap - this will crash
>> pkstart: ff800000h pkend: ffc00000h fixstart fbeec000h
>> ...
>> kernel BUG at arch/xen/i386/mm/init.c:583!
>> invalid operand: 0000 [#1]
>> ...
>> <0>Kernel panic: Attempted to kill the idel task!
>> In idle task - not syncing
>
>That's very odd, because this code is only enable with CONFIG_HIGHMEM
>and that's not enabled in 2.6 (and also broken for at least one reason).
>I guess the build picked up an old .config or install/boot/config* file,
>which is odd since you write that you cloned to an empty dir.  Could
>you please compare your .config file with the default config file we
>provide at linux-2.6.7-xen-sparse/arch/xen/configs/xen0_defconfig
>(i.e run diff -u linux-2.6.7-xen0/.config
>linux-2.6.7-xen-sparse/arch/xen/configs/xen0_defconfig)
>
>> When booting with the 2.4 kernel I get the same errors as I got earlier
>with
>> trying to boot a 2.6. xen kernel on the same machine (with older CSets)
>> - however I had to add the 3ware drivers to the 2.4 kernel config first,
>it
>> was not included by default - :
>
>Could you boot without Xen (native 2.4 or 2.6 kernel, with smp support)
>and then send the output of lspci -v?
>
>> It seems that the Dual-Xeon machine with 3ware Raid-Controler is a very
>challenging
>> configuration for XenLinux, which discoveres some potential
>bugs/problems ;-)
>> Anybody else had problems booting the newer CSets on SMP machines ?
>
>Not really, most of our machines are SMP.  None of them have 3ware
>Raid-Controllers and I don't really think it matters wether it's an
>SMP machine or not.
>
>> P.S.: As I was using the newest CSets (1.1183) SMP was disabled in the
>kernel configs, while
>>         I was booting on the Dual-Xeon machine.
>
>yes, and that's how it's supposed to be:  Domain kernels cannot use
>multiple CPUs but Xen has support for SMP, and if you run multiple
>domains, you can have each run on a different CPUs.
>
>    christian


Attachment: config.diff
Description: Binary data

Attachment: lspcivv.out
Description: Binary data

Attachment: lspciv.out
Description: Binary data


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.