Re: [Xen-devel] dom0 won't boot

[Ian Pratt <Ian.Pratt@xxxxxxxxxxxx>]

> I had what was checked in a few days ago working quite well, so I decided to 
> wipe the machine and try out two partitions (swap + /) and domains 1+ on 
> loopback.
> 
> Now, after xen finished booting, the machine reboots.
> 
> The only think that's really different is my swap partition is on /dev/sda1 
> and my root partition is on /dev/sda5.  But the grub menu looks ok as far as 
> I can tell...

I'd be very surprised if this was a Xen issue rather than a
configuration problem.

I suspect Xen boots fine, starts dom0, but then dom0 bails,
probably because it can't mount root or such like. 

If you boot xen with the 'noreboot' cmdline option you'll get a
chance to read why dom0 is exiting.

First, make sure your xen and vmlinuz-xen images are built from
the same repo version. 

Best,
Ian


-------------------------------------------------------
This SF.Net email is sponsored by OSTG. Have you noticed the changes on
Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now,
one more big change to announce. We are now OSTG- Open Source Technology
Group. Come see the changes on the new OSTG site. www.ostg.com
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/xen-devel