[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] desperate for help on netwrok of xen
e100 works fine in regular linux, and actually I tried in another machine with e100, just the same problem. and the second machine with 2 NICs also works fine in regular machine, using eth1. And here's the msg from dmesg and XendDmesg.py. This is for the machine only with e100. --------------- Linux version 2.4.26-xen0 (gcc version 3.3.2 20031022 (Red Hat Linux 3.3.2-1)) #3 Wed Jul 14 14:54:34 EDT 2004 On node 0 totalpages: 32768 zone(0): 4096 pages. zone(1): 28672 pages. zone(2): 0 pages. Kernel command line: /vmlinuz-2.4.26-xen0 root=/dev/hda3 ro console=tty0 3 Initializing CPU#0 Xen reported: 1595.203 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 15938.35 BogoMIPS Memory: 125996k/131072k available (2242k kernel code, 5076k reserved, 697k data, 116k init, 0k highmem) Dentry cache hash table entries: 16384 (order: 5, 131072 bytes) Inode cache hash table entries: 8192 (order: 4, 65536 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 8192 (order: 3, 32768 bytes) Page-cache hash table entries: 32768 (order: 5, 131072 bytes) CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 12K, L1 D cache: 8K CPU: L2 cache: 256K CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000 CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 CPU: Common caps: 3febfbff 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) 4 CPU 1.60GHz stepping 02 POSIX conformance testing by UNIFIX PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Probing PCI hardware (bus 01) PCI: Probing PCI hardware (bus 02) Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd Journalled Block Device driver loaded Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). Event-channel device installed. Xen virtual console successfully installed as ttyS Starting Xen Balloon driver Detected PS/2 Mouse Port. pty: 256 Unix98 ptys configured RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Intel(R) PRO/1000 Network Driver - version 5.2.30.1-k1 Copyright (c) 1999-2004 Intel Corporation. pcnet32.c:v1.28 02.20.2004 tsbogend@xxxxxxxxxxxxxxxx Intel(R) PRO/100 Network Driver - version 2.3.38-k1 Copyright (c) 2004 Intel Corporation PCI: Obtained IRQ 11 for device 02:0a.0 e100: selftest timeout e100: Failed to initialize, instance #0 Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH2: IDE controller at PCI slot 00:1f.1 ICH2: chipset revision 4 ICH2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio hda: C/H/S=0/0/0 from BIOS ignored hda: MAXTOR 6L040J2, ATA DISK drive hdc: AOPEN 16XDVD-ROM/AMH 20011108, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 78177792 sectors (40027 MB) w/1818KiB Cache, CHS=77557/16/63, UDMA(33) hdc: attached ide-cdrom driver. hdc: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 Partition check: hda: [PTBL] [4866/255/63] hda1 hda2 hda3 hda4 < hda5 > SCSI subsystem driver Revision: 1.00 Red Hat/Adaptec aacraid driver (1.1-3 Jul 14 2004 14:49:49) megaraid: v1.18k (Release Date: Thu Aug 28 10:05:11 EDT 2003) megaraid: no BIOS enabled. scsi0 : SCSI host adapter emulation for IDE ATAPI devices Initialising Xen netif backend NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 1024 buckets, 8Kbytes TCP: Hash tables configured (established 8192 bind 16384) ip_conntrack version 2.1 (1024 buckets, 8192 max) - 288 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008 for NET4.0 Bridge firewalling registered kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 116k freed EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal Adding Swap: 522072k swap-space (priority -1) kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal EXT3-fs: mounted filesystem with ordered data mode. ioperm not fully supported - set iopl to 3 ioperm not fully supported - set iopl to 3 ioperm not fully supported - set iopl to 3 ioperm not fully supported - set iopl to 3 ----------------- __ __ _ _____ _ _ \ \/ /___ _ __ / | |___ / __| | _____ _____| | \ // _ \ '_ \ | | |_ \ __ / _` |/ _ \ \ / / _ \ | / \ __/ | | | | |_ ___) |__| (_| | __/\ V / __/ | /_/\_\___|_| |_| |_(_)____/ \__,_|\___| \_/ \___|_| http://www.cl.cam.ac.uk/netos/xen University of Cambridge Computer Laboratory Xen version 1.3-devel (gcc version 3.3.2 20031022 (Red Hat Linux 3.3.2-1)) Wed Jul 14 14:55:27 EDT 2004 (XEN) Initialised 255MB memory (65472 pages) on a 255MB machine (XEN) Xen heap size is 10823KB (XEN) CPU0: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0 (XEN) CPU caps: 2febfbff 00000000 00000000 00000000 (XEN) Using scheduler: Borrowed Virtual Time (bvt) (XEN) Initializing CPU#0 (XEN) Detected 1595.203 MHz processor. (XEN) Found and enabled local APIC! (XEN) CPU0: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0 (XEN) CPU caps: 2febfbff 00000000 00000000 00000000 (XEN) CPU0 booted (XEN) SMP motherboard not detected. (XEN) enabled ExtINT on CPU#0 (XEN) ESR value before enabling vector: 00000000 (XEN) ESR value after enabling vector: 00000000 (XEN) Using local APIC timer interrupts. (XEN) Calibrating APIC timer for CPU0... (XEN) ..... CPU speed is 1595.1718 MHz. (XEN) ..... Bus speed is 99.6981 MHz. (XEN) ..... bus_scale = 0x00006617 (XEN) Time init: (XEN) .... System Time: 20001858ns (XEN) .... cpu_freq: 00000000:5F14E010 (XEN) .... scale: 00000001:40F65066 (XEN) .... Wall Clock: 1091069944s 40000us (XEN) PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=2 (XEN) PCI: Using configuration type 1 (XEN) PCI: Probing PCI hardware (XEN) PCI: Probing PCI hardware (bus 00) (XEN) Transparent bridge - PCI device 8086:244e (XEN) PCI: Using IRQ router PIIX/ICH [8086/2440] at 00:1f.0 (XEN) *** LOADING DOMAIN 0 *** (XEN) Xen-ELF header found: 'GUEST_OS=linux,GUEST_VER=2.4,XEN_VER=1.3,VIRT_BASE=0xC0000000' (XEN) PHYSICAL MEMORY ARRANGEMENT: (XEN) Kernel image: 02800000->02b028fc (XEN) Initrd image: 00000000->00000000 (XEN) Dom0 alloc.: 02c00000->0ac00000 (XEN) VIRTUAL MEMORY ARRANGEMENT: (XEN) Loaded kernel: c0100000->c044e988 (XEN) Init. ramdisk: c044f000->c044f000 (XEN) Phys-Mach map: c044f000->c046f000 (XEN) Page tables: c046f000->c0472000 (XEN) Start info: c0472000->c0473000 (XEN) Boot stack: c0473000->c0474000 (XEN) TOTAL: c0000000->c0800000 (XEN) ENTRY ADDRESS: c0100000 (XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen). (XEN) PCI: Found IRQ 11 for device 02:0a.0 ---------------- Thanks, Yan ----- Original Message ----- From: "Steven Hand" <Steven.Hand@xxxxxxxxxxxx> To: "Yan Li" <yan_li00@xxxxxxxxxxx> Cc: <xen-devel@xxxxxxxxxxxxxxxxxxxxx> Sent: Thursday, July 29, 2004 2:21 AM Subject: Re: [Xen-devel] desperate for help on netwrok of xen > > > I've asked about eth0, but now I'm really desperate. > > > > -first, I built xen-unstable on a machine with NIC e100, but there's no > > eth0, ifconfig only shows loopback. And I'm sure in the .config file > > 'CONFIG_E100=y'. > > Can you post the output from booting xen and domain 0 (xenlinux)? You > might also like to check if the e100 is found and operates correctly > under regular linux... > > cheers, > > S. > > ------------------------------------------------------- This SF.Net email is sponsored by BEA Weblogic Workshop FREE Java Enterprise J2EE developer tools! Get your free copy of BEA WebLogic Workshop 8.1 today. http://ads.osdn.com/?ad_id=4721&alloc_id=10040&op=click _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/xen-devel
|
![]() |
Lists.xenproject.org is hosted with RackSpace, monitoring our |