[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] Create DOM1 problems again



hi Ian,
Thanks a lot for your kind reply.
yes, it is part of the console output when domain1 is booting.
Here is the output:
"
[1] Setting network parameters: [OK]
[1] Bringing up loopback interface: Error, some other host already uses
address 127.0.0.1.
[1] [FAILED]
[1] Bringing up interface eth0:
[1] Determining IP information for eth0 ... failed.
[1] [FAILED]
"
So I can't get eth0 up. I can ping 169.254.1.0, but can't for 169.254.1.1
which confirms that the nat is working but the eth0 isn't up.

I tried adding NOZEROCONF=yes to ifcfg-lo. But the problem is still there.

What could be possiblely wrong?

--Qian


On Tue, 30 Mar 2004, Ian Pratt wrote:

>
> > I'm trying to create the new domain, using the Xen 1.2  installation. I
> > met problems before, it turned out that's because insufficiency of memory.
> > But still don't have luck to make it run.
> > Two things are confusing me:
> >
> > (1) The xen_read_console prints:
> > "Bringing up loopback interface: Error, some other host already uses
> > address 127.0.0.1
> > [Failed]"
> > Is this normal? If not how to solve it?
>
> You mean that this message is part of the console output of the
> other domain that is booting?
>
> What root file system are you using? RH9?
> If so, append "NOZEROCONF=yes" to /etc/sysconfig/networking-scripts/ifcfg-lo
>
> > (2)In the end, the xen_read_console prints:
> > "INIT: Id "1" respawning too fast: disabled for 5 minutes
> > INIT: Id "4" respawning too fast: disabled for 5 minutes
> > INIT: Id "2" respawning too fast: disabled for 5 minutes
> > INIT: Id "3" respawning too fast: disabled for 5 minutes
> > INIT: Id "5" respawning too fast: disabled for 5 minutes
> > INIT: Id "6" respawning too fast: disabled for 5 minutes
> > INIT: no more processes left in this runlevel
> > ..."
> > what does this mean?
>
> It means that you need to edit your /etc/inittab to comment out
> the lines that are running a *getty on tty[123456]. If you were
> running 1.3 you could start a mingetty on xen/cons (having done
> the mknod), but in 1.2 you'll have to log in over the network.
>
> If sshd is starting in your new domain, and you've configured
> its network correctly, you should be able to ssh in.
>
> Best,
> Ian
>


-------------------------------------------------------
This SF.Net email is sponsored by: IBM Linux Tutorials
Free Linux tutorial presented by Daniel Robbins, President and CEO of
GenToo technologies. Learn everything from fundamentals to system
administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.