[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] Network interface problem



At the moment you can only have one active ethernet card.

you can selected the card you'd like xen to use with:
ifname=eth*
in the kernel command line under grub

For example I use a 3c905 for grub netbooting and then a tg3 for Xen.
works fine.

Rolf

On Wed, 2004-02-11 at 10:05, Tvrtko A. Uršulin wrote:
> More problems:
> 
> My server has onboard tg3, and additional 3c905 network card. While booting 
> xen outputs: 
> 
> 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
> 00:06.0: 3Com PCI 3c905C Tornado at 0xd400. Vers LK1.1.16
> tg3.c:v2.3 (November 5, 2003)
> tg3: Could not obtain valid ethernet address, aborting.
> 
> And 3c905 becomes eth0 while tg3 is unavailable. What am I doing wrong?
> 
> 
> -------------------------------------------------------
> The SF.Net email is sponsored by EclipseCon 2004
> Premiere Conference on Open Tools Development and Integration
> See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
> http://www.eclipsecon.org/osdn
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.sourceforge.net/lists/listinfo/xen-devel



-------------------------------------------------------
The SF.Net email is sponsored by EclipseCon 2004
Premiere Conference on Open Tools Development and Integration
See the breadth of Eclipse activity. February 3-5 in Anaheim, CA.
http://www.eclipsecon.org/osdn
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxxxx
https://lists.sourceforge.net/lists/listinfo/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.