Re: [Wg-test-framework] May 13th XenProject - AllNet call

["Paul L. George" <pgeorge@xxxxxxxxxx>]

> On May 14, 2015, at 9:04 AM, Ian Jackson <Ian.Jackson@xxxxxxxxxxxxx> wrote:
> 
> Paul L. George writes ("RE: [Wg-test-framework] May 13th XenProject - AllNet 
> call"):
>> I moved the lines back to Oseleta 0/1 and replaced the rimava 0 = tty 28
>> and rimava 1 = tty 32 lines with tested cables plus on rimava0 I used a
>> straight thru cable and a factory null Modem connector.  I tested this cable
>> with my laptop connected to the serial port and it seemed to work. In Rimava
>> 1 I used a tested cable with a null modem adaptor we made.  Both passed the
>> loop back test.  I tired several BIOS settings but the original settings
>> were correct.
> 
> Did you (or Don) do any tests with the serial connected to the
> Rocketport lines ?
> 
Not yet Don will test today.


>> I also heard something rebooting when I was nowhere near the rack.  I
>> assumed it was just a test restarting one of the servers. I heard it once
>> about 17:20 my time and again about at about 18:00.  If it was something
>> caused let me know.  I am being as careful as I can be in a rack full of
>> wires. I am paranoid now so any thing I hear that is not normal causes me to
>> check all the servers to see if they are rebooting.
> 
> Right.  Rebooting machines is normal for osstest.  One every few
> minutes.  Thanks for being careful and reporting your observations.
> 
> Thanks,
> Ian.

_______________________________________________
Wg-test-framework mailing list
Wg-test-framework@xxxxxxxxxxxxxxxxxxxx
http://lists.xenproject.org/cgi-bin/mailman/listinfo/wg-test-framework