Re: [Wg-test-framework] Xen Project - AllNet Minutes from March 18th

["Paul L. George" <pgeorge@xxxxxxxxxx>]

> On Mar 20, 2015, at 7:55 AM, Ian Campbell <ian.campbell@xxxxxxxxxx> wrote:
> 
>> On Wed, 2015-03-18 at 15:43 +0000, Ian Campbell wrote:
>> The other two (cubietruck-{braque,picasso}) seem to have Ethernet issues
>> but I believe this relates to the boards (or firmware etc) and not the
>> wiring since it also happened when the crate was in Cambridge.
> 
> Actually, the issue on braque is different to the one I'd seen before.
> 
> Braque is failing to install Debian because it cannot talk to the proxy
> to download the packages, DNS is failing. It has downloaded quite a bit
> of stuff before this point. Logging in I find that a ping by IP address
> will loose packets for a while before it starts working.
> 
> Things like the ARP table and IP config look fine and comparable to
> other cubietrucks.
> 
> Paul (or Don), please could you check (or perhaps swap out for a known
> good one) the Ethernet cable for cubietruck-braque as a first step.
> 
Ian, 
All four of those cables and adaptors were tested end to end with a cable 
tester and worked on the bench with the ARM crate.  I also tested them with a 
loop back plug on my Debian laptop's serial port with picocom.

I don't think it is the cables.  I will have make some more straight through 
adaptors to have something to swap with.

I can swap positions with one that is working on the Arendale side.  Tell me 
which ones to swap we will at the COLO today.
Paul



>> I'm investigating those two, but 6/8 should be OK re ARM32 capacity for
>> a while (currently we have 2 arm nodes, albeit faster ones, in the
>> Cambridge-based test system).
> 
> Ian.

_______________________________________________
Wg-test-framework mailing list
Wg-test-framework@xxxxxxxxxxxxxxxxxxxx
http://lists.xenproject.org/cgi-bin/mailman/listinfo/wg-test-framework