WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

RE: [Xen-users] Unable to connect (with adition, device 0(vif) problem)

Ops, i forgot some other details, for problem 2, on command line, do : "sudo chmod 600 ifcfg-xenbr0" after saving so the file will have the same permition as ifcfg-eth0.

 

On Thu, 06 Oct 2011 17:49:17 -0300, andre@xxxxxxxxxxxxxxxx wrote:

Ok, as i was busy with XIII SIGE and some other stuff and I couldn't place the outcome, and as I noted that my doubt came out on google engine I will put here the correct answer for my problem so anyone else lookinf for it will be ok(and wont have to kill itself on command line as I had):

problem 1: unable to connect to 'localhost:8000': Connection refused...

Solution for problem 1: on command line, do "chkconfig xencommons off", run it as root or just sudo.

 

Then the second problem come after system reboot:

device 0 (vif) could not be connected Could not find bridge and none was specified...

Solution for problem 2: You need to creat xen-bridge, the following code worked for me, but some may need to change it, the line name its an example, look for your ethernet device and change it. Save as ifcfg-xenbr0 on /etc/sysconfig/network, backup ifcfg-eth0 and remove it or you will have conflict;

 

BOOTPROTO='dhcp'
BRIDGE='yes'
BRIDGE_FORWARDDELAY='0'
BRIDGE_PORTS='eth0'
BRIDGE_STP='off'
BROADCAST=''
ETHTOOL_OPTIONS=''
IPADDR=''
MTU=''
NAME='NetXtreme II BCM5709 Gigabit Ethernet'
NETMASK=''
NETWORK=''
REMOTE_IPADDR=''
STARTMODE='nfsroot'
USERCONTROL='no'
#ETHTOOL_OPTIONS='wol g'

 

For anyone who found this to be a solution, good luck :)

 

And thanks to who tried to help-me out.

 

André Pfeiffer

On Mon, 5 Sep 2011 21:59:07 -0500, Scott Meyers wrote:

You need to enable "xend-http-server" in /etc/xen/xend-config.sxp


Date: Mon, 5 Sep 2011 19:45:48 -0300
From: andre@xxxxxxxxxxxxxxxx
To: xen-users@xxxxxxxxxxxxxxxxxxx
Subject: [Xen-users] Unable to connect

Hello,
 
I have been using xen under open-suse 11.4 for almost half an year now. This week I had to reformat the provider and so I did install everything again (now there is a dual boot and microsoft windows server 2008 installed on the first half partition of the disk) again open-suse 11.4 and xen. I do start the xen kernel at grub but when I try to connect and/or creat a new domU the folling message come out:
"unable to connect to 'localhost:8000': Connection refused

Traceback (most recent call last):
File "/usr/share/virt-manager/virtManager/connection.py", line 983, in _try_open
None], flags)
File "/usr/lib64/python2.7/site-packages/libvirt.py", line 107, in openAuth
if ret is None:raise libvirtError('virConnectOpenAuth() failed')
libvirtError: unable to connect to 'localhost:8000': Connection refused"
 
I do not remember having that problem before and the first time I booted the machine I was able to connect and start the new machine creation. Anyone can give-me a hint please?
 
Gratefull in advance,
 
André. 
 

_______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users

 

 

 

 
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
<Prev in Thread] Current Thread [Next in Thread>