| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
Re: [Xen-users] Xen VM Create Question
Hi Todd,
Do you know where I am to pickup that MAC address for the vif? Is it the
MAC of the eth
from ifconfig that is already being used for the dom0's connection or
something else?
Thanks,
Randy
On 5/5/2011 6:08 AM, Todd Deshane wrote:
On Thu, May 5, 2011 at 7:58 AM, Randy Katz<rkatz@xxxxxxxxxxxxxxxxxxxxx> wrote:
Hi,
dom0 CentOS 5.6 with updates and Virtualization group installed.
domU CentOS 5.6 install
I have configured a conf file and a kickstart and the install goes well,
however, it seems to be reverting to a dhcp install rather then grabbing the
eth
information I give it. Also, it creates an ifcfg-eth0.bak file with the info
I give it with a different MAC address, not sure how it gets
either. If there is anything you know about this please let me know.
If I remove ifcfg-eth0, mv ifcfg-eth0.bak to ifcfg-eth0 and remove the
HWADDR and do a /etc/init.d/network restart
it works fine with the correct IP.
You need to set a MAC address on the vif line of the domU config (for
example vif=['mac=00:16:3e:aa:aa:aa,bridge=xenbr1']
There was also a but in a centos package (one the package like kudzu
or something that causes this), but I'm not sure if that is what you
are running into in this case.
Thanks,
Todd
ifcfg-eth0
# Xen Virtual Ethernet
DEVICE=eth0
BOOTPROTO=dhcp
ONBOOT=yes
HWADDR=00:16:3e:06:33:04
ifcfg-eth0.bak
# Xen Virtual Ethernet
DEVICE=eth0
BOOTPROTO=static
DHCPCLASS=
HWADDR=00:16:3E:72:6B:32
IPADDR=192.168.1.23
NETMASK=255.255.255.0
ONBOOT=yes
test1.cfg
kernel = "/etc/xen/images/vmlinuz"
ramdisk = "/etc/xen/images/initrd.img"
extra = "text ks=http://192.168.1.21/test1.ks.cfg";
name = "test1"
memory = "1024"
disk = [ "phy:/dev/vg1/test1,xvda,w" ]
vif = [ 'bridge=xenbr1', ]
vcpus=1
on_reboot = 'destroy'
on_crash = 'destroy'
test1.ks.cfg
install
url --url http://192.168.1.21/centos
lang en_US.UTF-8
keyboard us
network --device=eth0 --bootproto=static --ip=192.168.1.23
--netmask=255.255.255
.0 --gateway=192.168.1.1 --nameserver=192.168.1.1 --hostname=test1 --
noipv6 --onboot=yes
rootpw sc4300.1
firewall --enabled --port=22:tcp
authconfig --enableshadow --enablemd5
selinux --disabled
timezone --utc America/Los_Angeles
bootloader --location=mbr --driveorder=xvda --append="console=xvc0"
reboot
clearpart --all --initlabel --drives=xvda
part /boot --fstype ext3 --size=1024 --ondisk=xvda
part pv.2 --size=0 --grow --ondisk=xvda
volgroup VolGroup00 --pesize=16384 pv.2
logvol / --fstype ext3 --name=LogVol00 --vgname=VolGroup00 --size=1024
--grow
logvol swap --fstype swap --name=LogVol01 --vgname=VolGroup00 --size=2048
--grow
--maxsize=4096
%packages
@base
Best regards,
Randy
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
| |
|
Home