On Sat, Feb 26, 2011 at 07:50:37PM +0000, Todd Deshane wrote:
> On Sat, Feb 26, 2011 at 12:11 AM, Javier Frias <jfrias@xxxxxxxxx> wrote:
> > I posted a bug about this, but figured I'd ask the mailing list to see
> > if someone had seen this.
> > Bugzilla: http://bugzilla.xensource.com/bugzilla/show_bug.cgi?id=1746
> >
> > Basically, I had a dom0, after 57 days of non issues, lock up for 4
> > hours, completely unresponsive, and then recovered. The domU's were
> > unaffected except for the fact that I could not shut them down. (
> > since dom0 was unresponsive ). Although I was able to gain access via
> > xapi/xencenter, and I atleast had some access ( console, status, etc,
> > all worked via xapi).
> >
>
> Could you clarify this explanation a bit. What access was not
> available for 4 hours?
>
> You say you could access via xapi/xencenter was this after the 4 hours
> or during?
>
> Did you happen to look at the guest performance during those times?
> Was one of the guest doing a lot of disk I/O? Could you give some more
> information as to how the guests access their virtual disks (local,
> NFS, iSCSI, etc.) and any other information about your setup that
> could give us hints as to what might have caused this.
>
Hey,
Did you get more info about this issue?
Did the system become responsive after some process was killed in dom0?
(due to oom killer, perhaps?)
-- Pasi
> Thanks,
> Todd
>
> > It seemed to have done a lot of paging and swapping, and there were
> > faults reported in cpu 3. The load was also extremely high on dom0.
> >
> > Has anyone seen this? I could only find one other posting with a
> > similar issue
> > http://www.gossamer-threads.com/lists/xen/api/197429?do=post_view_threaded
> >
> > I'm running XCP release 1.0.0-38754c (xcp), any help greatly appreciated.
> >
> >
> > BUG: soft lockup - CPU#3 stuck for 61s! [swapper:0]
> > Modules linked in: nls_utf8 hfsplus bonding tun lockd sunrpc bridge
> > stp llc ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 xt_state
> > nf_conntrack xt_tcpudp x_tables binfmt_misc dm_mirror video output sbs
> > sbshc fan container battery ac parport_pc lp parport nvram joydev
> > sr_mod cdrom evdev usb_storage usb_libusual usbhid sg thermal button
> > processor thermal_sys bnx2 serio_raw 8250_pnp rtc_cmos 8250
> > serial_core rtc_core tpm_tis rtc_lib tpm tpm_bios pcspkr
> > dm_region_hash dm_log dm_mod ide_gd_mod megaraid_sas sd_mod scsi_mod
> > ext3 jbd uhci_hcd ohci_hcd ehci_hcd usbcore fbcon font tileblit
> > bitblit softcursor [last unloaded: ip_tables]
> >
> > Pid: 0, comm: swapper Not tainted
> > (2.6.32.12-0.7.1.xs1.0.0.298.170582xen #1) PowerEdge R710
> > EIP: 0061:[<c01013a7>] EFLAGS: 00000246 CPU: 3
> > EIP is at 0xc01013a7
> > EAX: 00000000 EBX: 00000001 ECX: 00000000 EDX: ee853f78
> > ESI: 00117f58 EDI: 00000003 EBP: ee853f90 ESP: ee853f74
> > DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0069
> > CR0: 8005003b CR2: b7736000 CR3: 0d9f4000 CR4: 00002660
> > DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
> > DR6: ffff0ff0 DR7: 00000400
> > Call Trace:
> > [<c0107035>] ? xen_safe_halt+0xb5/0x150
> > [<c010ac7e>] xen_idle+0x1e/0x50
> > [<c0102a7b>] cpu_idle+0x3b/0x60
> > [<c037b00d>] cpu_bringup_and_idle+0xd/0x10
> >
> > _______________________________________________
> > Xen-users mailing list
> > Xen-users@xxxxxxxxxxxxxxxxxxx
> > http://lists.xensource.com/xen-users
> >
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home