| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
Re: [Xen-users] PCI Passtrought problem
Hi,
I guess you could use pciback.hide too. Something like:
xen-pciback.permissive pciback.permissive pciback.hide=(05:05.0)
xen-pciback.hide=(05:05.0)
I guess you should better RTFM:
http://wiki.xensource.com/xenwiki/XenPCIpassthrough
Adrian
On 21.03.2011 20:13, latdna wrote:
Hello,
I have 890FX Deluxe3 motherboard with latest 1.90 bios and IOMMU enabled.
Linux distro is Debian Squeeze with xen kernel.
I did add my pci device to /boot/grub/grub.cfg and rebooted the machine but:
xm pci-list-assignable-devices won't list anything.
root@DebianLinux:/sys/bus/pci/drivers# xm pci-list-assignable-devices
root@DebianLinux:/sys/bus/pci/drivers#
root@DebianLinux:/sys/bus/pci/drivers# grep hide /boot/grub/grub.cfg
module /vmlinuz-2.6.32-5-xen-amd64 placeholder
root=/dev/mapper/DebianLinux-root ro quiet xen-pciback.hide=(05:05.0)
linux /vmlinuz-2.6.32-5-xen-amd64
root=/dev/mapper/DebianLinux-root ro quiet xen-pciback.hide=(05:05.0)
linux /vmlinuz-2.6.32-5-amd64 root=/dev/mapper/DebianLinux-root ro
quiet xen-pciback.hide=(05:05.0)
ls /sys/bus/pci/drivers/pciback*
0000:05:05.0 irq_handlers module new_slot quirks remove_slot
uevent
bind irq_handler_state new_id permissive remove_id slots
unbind
05:05.0 Multimedia video controller: Device 1b07:1204 (rev 30)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow>TAbort- SERR-
<PERR- INTx-
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fe800000 (32-bit, non-prefetchable) [disabled]
[size=2M]
Kernel driver in use: pciback
00: 07 1b 04 12 00 00 00 04 30 00 00 04 10 00 00 00
10: 00 00 80 fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 0a 01 10 28
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
(XEN) ACPI: SRAT C7FAA460, 00E8 (r3 AMD FAM_F_10 2 AMD 1)
(XEN) ACPI: IVRS C7FAA5C0, 00C8 (r1 AMD RD890S 202031 AMD 0)
(XEN) ACPI: SSDT C7FAA690, 088C (r1 A M I POWERNOW 1 AMD 1)
(XEN) AMD-Vi: IOMMU 0 Enabled.
(XEN) Init. ramdisk: ffffffff816ba000->ffffffff837ff000
(XEN) Enabling APIC mode: Flat. Using 2 I/O APICs
(XEN) I/O virtualisation enabled
--
View this message in context:
http://xen.1045712.n5.nabble.com/PCI-Passtrought-problem-tp4235784p4235784.html
Sent from the Xen - User mailing list archive at Nabble.com.
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
| |
|
Home