xen-users
Re: [Xen-users] Remus: network buffering problem
Hi Shriram,
Thank you so much for your advice.
I have enabled IFB (Intermediate functional block) module. I have enabled Ingress, redirecting, mirroring, NET_SCH_PLUG, and Netfilter. I have moduled or enabled the rest of the selections under QoS and/or fair queueing. Now it give the following error.
I cannot find the sch_queue module under QoS and/or fair queueing. I find a few previous discussions about the sch_queue module, but have not found a good solution. Could you help a bit further? I am using XEN 4.0.1 release pvops on Ubuntu 10.10 (2.6.32.27).
modprobe -q sch_queue
Traceback (most recent call last):
File "/usr/bin/remus", line 210, in <module> run(cfg)
File "/usr/bin/remus", line 119, in run bufs.append(BufferedNIC(vif))
File "/usr/local/lib/python2.6/dist-packages/xen/remus/device.py", line 275, in __init__ self.setup()
File "/usr/local/lib/python2.6/dist-packages/xen/remus/device.py", line 314, in setup raise BufferedNICException('could not load sch_queue module')
xen.remus.device.BufferedNICException: could not load sch_queue module
On Sat, Feb 19, 2011 at 6:25 PM, Shriram Rajagopalan <rshriram@xxxxxxxxx> wrote:
Hi, Todd I realize what you mean. <330.gif> Hope Shriram can shed some light to us! On Fri, Feb 18, 2011 at 9:44 PM, Todd Deshane <todd.deshane@xxxxxxx> wrote:
Adding our new remus maintainer to the CC
On Fri, Feb 18, 2011 at 6:24 AM, Wenda Ni < wonda.ni@ gmail.com> wrote:
> Hello,
>
> Many thanks to Simon for his trouble shooting on live migration. I have now
> started testing remus according to the remus link
> http://nss.cs.ubc.ca/remus/doc.html
>
> 1) Remus in its simplest mode (--no-net option), without disk replication or
> network protection, is now working good.
>
> 2) When we add the network buffering protection (remove the --no-net
> option), remus gives the error as follows:
>
> modprobe -q ifb
>
> modprobe -q imq
> Have you installed the ifb module? You have to enable it while configuring the dom0 kernel. Device Drivers-->network devices-->Intermediate Frame Buffer
You also need to enable a whole bunch of other things Networking ->QoS ->Ingress, actions, mirred, redirect, etc and Plug Queue (NET_SCH_PLUG).
You are better off at the moment to just enable all or most of the stuff
under Netfilter and Qos as modules. Might make your task easier.
Btw thanks for pointing this out. These should probably be enabled by the kernel build scripts (buildconfigs/enable-xen-config ) or some such place.
Shriram
> Traceback (most recent call last):
> File "/usr/bin/remus", line 210, in <module>
> run(cfg)
> File "/usr/bin/remus", line 119, in run
> bufs.append(BufferedNIC(vif))
> File "/usr/local/lib/python2.6/dist-packages/xen/remus/device.py", line
> 272, in __init__
> self.pool = Netbufpool(selectnetbuf())
> File "/usr/local/lib/python2.6/dist-packages/xen/remus/device.py", line
> 174, in selectnetbuf
> raise BufferedNICException('no net buffer available')
> xen.remus.device.BufferedNICException: no net buffer available
> Exception AttributeError: "'BufferedNIC' object has no attribute 'bufdev'"
> in <bound method BufferedNIC.__del__ of <xen.remus.device.BufferedNIC object
> at 0xd9dd90>> ignored
>
> I googled, but find little useful info. Could anyone know my problem?
>
> --
> Cheers,
>
> Wenda Ni, Ph.D.
> Dept. of Computer Science and Engineering
> State University of New York (SUNY) at Buffalo
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
>
-- Cheers,
Wenda Ni, Ph.D.
Dept. of Computer Science and Engineering
State University of New York (SUNY) at Buffalo
--
Cheers,
Wenda Ni, Ph.D.
Dept. of Computer Science and Engineering
State University of New York (SUNY) at Buffalo
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|