On Sun, Jan 09, 2011 at 11:37:18PM +0000, Scott A. Wozny wrote:
>
> Hi Mark,
>
> 2 main reasons. The secondary reason is that I've had poor luck with
> pre-compiled Xen packages (I haven't tried it on this distro, but I wasn't
> even able to get the live CD to work), but the primary reason is that I need
> to use Xen 4 (need to be able to do guest disk resize without shutting the
> guest down) and I prefer to do it on Ubuntu for which there is no Xen 4
> package. The reason I'm here asking about Xen 3 is because I was getting so
> frustrated trying to get Xen 4 to compile that I thought perhaps it was too
> new and a more mature code base like Xen 3 might compile and install properly
> for me. Once I got that to work I was going to take what I had learned and
> go back to my original Xen 4 plan, hopefully with knowledge that would help
> me get that to work. However, now that I realize I can't get Xen 3 to
> compile and work properly on this box either, I've been thinking I have a
> hardware compatibility problem which is why I posted to this forum asking for
> any tips and tricks people could share on tracking down whether there really
> was a hardware compatibility problem here and from there how to fix it.
> Primarily this is a learning exercise for me so I can eventually get back to
> my original goal.
>
> If you have any suggestions on how to get there, I'm definitely interested in
> hearing your thoughts.
I run a load of servers on Debian squeeze, which uses xen 4.0.1 at
present and works pretty well (had some issues with vt-d stuff..).
Extremely simply setup, you just have to change the order in
/etc/grub.d/ to get xen to boot by default.
Packages that should give you everything you need:
xen-linux-system-2.6.32-5-xen-amd64
xen-qemu-dm-4.0 (this for hvm)
Regards,
Mark
>
> Thanks,
>
> Scott
>
>
>
> CC: vchampion@xxxxxxxxx; xen-users@xxxxxxxxxxxxxxxxxxx
> From: mark@xxxxxxxxxxxxxxxxxx
> Subject: Re: [Xen-users] (no subject)
> Date: Sun, 9 Jan 2011 23:18:18 +0000
> To: sawozny@xxxxxxxxxxx
>
>
>
>
>
> On 9 Jan 2011, at 21:11, "Scott A. Wozny" <sawozny@xxxxxxxxxxx> wrote:
>
>
>
>
> First of all, sorry about the lack of a subject on the email. I'm usually
> better about that stuff.
>
> Anyway, the boot sequence goes by pretty fast, but here is the results of
> booting the following grub entry on a Xen 3.4.3 install on Debian 5.07 built
> per the instructions found at
> http://www.linuxinstead.com/blog/2009/04/07/installing-xen-33-from-source-on-debian-50-lenny/
> :
>
>
>
>
> Why are you compiling from source with debian? Just install the
> xen-linux-system packages.
>
> Regards,
> Mark
>
>
>
> Grub Entry:
> root (hd0,0)
> kernel /xen-3.4.3.gz
> module /vmlinuz-2.6.18.8-xen root=/dev/mapper/xenhost-root ro console=tty0
> module /initrd.img-2.6.18.8-xen
>
>
> Boot results:
>
>
> Booting 'Xen 3.4.3 / Debian GNU/Linux, kernel 2.6.18.8-xen'
>
>
> root (hd0,0)
> Filesystem type is extfs2, partition type 0x83
> kernel /xen-3.4.3.gz
> [Multiboot-elf, <0x100000:0x12d790:0x69870>, shtab=0x297078,
> entry=0x100000]
>
> module /vmlinuz-2.6.18.8-xen root=/dev/mapper/xenhost-root ro console=tty0
> [Multiboot-module @0x298000, 0x7412d8 bytes]
> module /initrd.img-2.6.18.8-xen
> [Multiboot-module @0x9d (this line displays to varying lengths each time,
> but it goes by so fast I can't get the rest of it before the machine reboots)
>
>
>
>
> A different xen kernel also showed up in my grub that doesn't reboot, but
> also doesn't boot properly. Here are the results of that if it helps:
>
>
> Grub entry:
> root (hd0,0)
> kernel /vmlinuz-2.6.18.8-xen root=/dev/mapper/xenhost-root ro quiet
> initrd /initrd.img-2.6.18.8-xen
>
>
> Boot results:
>
>
> Booting 'Debian GNU/Linux, kernel 2.6.18.8-xen'
>
>
> root (hd0,0)
> Filesystem type is extfs2, partition type 0x83
> kernel /vmlinuz-2.6.18.8-xen root=/dev/mapper/xenhost-root ro quiet
>
>
> Error 13: Invalid or unsupported executable format
>
>
> Press any key to continue...
>
> Here are the dmesg file contents once I booted back into the original kernel
> built as part of the Debian 5.0.7 install (if you can recommend any good
> resources on interpreting dmesg output I'd appreciate it; in the meantime
> I'll start with Google; also, there was a TV card and modem in the machine
> that an earlier version of the dmesg file was complaining about
> compatibility; I don't need either so I've pulled them out of the machine and
> these are the results of the machine booting without them, but do you think I
> should do a full reinstall now that they're gone?):
>
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Linux version 2.6.26-2-amd64 (Debian 2.6.26-26lenny1)
> (dannf@xxxxxxxxxx) (gcc version 4.1.3 20080704 (prerelease) (Debian
> 4.1.2-25)) #1 SMP Thu Nov 25 04:30:55 UTC 2010
> [ 0.000000] Command line: root=/dev/mapper/xenhost-root ro quiet
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
> [ 0.000000] BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
> [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cffa0000 (usable)
> [ 0.000000] BIOS-e820: 00000000cffa0000 - 00000000cffae000 (ACPI data)
> [ 0.000000] BIOS-e820: 00000000cffae000 - 00000000cfff0000 (ACPI NVS)
> [ 0.000000] BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> [ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
> [ 0.000000] Entering add_active_range(0, 0, 155) 0 entries of 3200 used
> [ 0.000000] Entering add_active_range(0, 256, 851872) 1 entries of 3200
> used
> [ 0.000000] Entering add_active_range(0, 1048576, 2293760) 2 entries of
> 3200 used
> [ 0.000000] max_pfn_mapped = 2293760
> [ 0.000000] init_memory_mapping
> [ 0.000000] DMI present.
> [ 0.000000] ACPI: RSDP 000FABB0, 0014 (r0 ACPIAM)
> [ 0.000000] ACPI: RSDT CFFA0000, 004C (r1 ACRSYS ACRPRDCT 20090717 MSFT
> 97)
> [ 0.000000] ACPI: FACP CFFA0200, 0084 (r1 ACRSYS FACP1138 20090717 MSFT
> 97)
> [ 0.000000] ACPI: DSDT CFFA0620, 7CB7 (r1 8A7G1 8A7G1-C0 4 INTL
> 20051117)
> [ 0.000000] ACPI: FACS CFFAE000, 0040
> [ 0.000000] ACPI: APIC CFFA0390, 0080 (r1 ACRSYS APIC1138 20090717 MSFT
> 97)
> [ 0.000000] ACPI: MCFG CFFA0410, 003C (r1 ACRSYS OEMMCFG 20090717 MSFT
> 97)
> [ 0.000000] ACPI: SLIC CFFA0450, 0176 (r1 ACRSYS ACRPRDCT 20090717 MSFT
> 97)
> [ 0.000000] ACPI: WDRT CFFA05D0, 0047 (r1 ACRSYS NV-WDRT 20090717 MSFT
> 97)
> [ 0.000000] ACPI: OEMB CFFAE040, 007A (r1 ACRSYS OEMB1138 20090717 MSFT
> 97)
> [ 0.000000] ACPI: HPET CFFAA620, 0038 (r1 ACRSYS OEMHPET0 20090717 MSFT
> 97)
> [ 0.000000] ACPI: NVHD CFFAE0C0, 0284 (r1 ACRSYS NVHDCP 20090717 MSFT
> 97)
> [ 0.000000] ACPI: AWMI CFFAE350, 004E (r1 ACRSYS OEMB1138 20090717 MSFT
> 97)
> [ 0.000000] ACPI: SSDT CFFAEBA0, 0A7C (r1 DpgPmm CpuPm 12 INTL
> 20051117)
> [ 0.000000] No NUMA configuration found
> [ 0.000000] Faking a node at 0000000000000000-0000000230000000
> [ 0.000000] Entering add_active_range(0, 0, 155) 0 entries of 3200 used
> [ 0.000000] Entering add_active_range(0, 256, 851872) 1 entries of 3200
> used
> [ 0.000000] Entering add_active_range(0, 1048576, 2293760) 2 entries of
> 3200 used
> [ 0.000000] Bootmem setup node 0 0000000000000000-0000000230000000
> [ 0.000000] NODE_DATA [0000000000012000 - 0000000000016fff]
> [ 0.000000] bootmap [0000000000017000 - 000000000005cfff] pages 46
> [ 0.000000] early res: 0 [0-fff] BIOS data page
> [ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE
> [ 0.000000] early res: 2 [200000-675397] TEXT DATA BSS
> [ 0.000000] early res: 3 [378c2000-37fef99a] RAMDISK
> [ 0.000000] early res: 4 [9bc00-fffff] BIOS reserved
> [ 0.000000] early res: 5 [8000-11fff] PGTABLE
> [ 0.000000] [ffffe20000000000-ffffe20002dfffff] PMD ->
> [ffff810001200000-ffff810003ffffff] on node 0
> [ 0.000000] [ffffe20003800000-ffffe20007bfffff] PMD ->
> [ffff81000c000000-ffff8100103fffff] on node 0
> [ 0.000000] Zone PFN ranges:
> [ 0.000000] DMA 0 -> 4096
> [ 0.000000] DMA32 4096 -> 1048576
> [ 0.000000] Normal 1048576 -> 2293760
> [ 0.000000] Movable zone start PFN for each node
> [ 0.000000] early_node_map[3] active PFN ranges
> [ 0.000000] 0: 0 -> 155
> [ 0.000000] 0: 256 -> 851872
> [ 0.000000] 0: 1048576 -> 2293760
> [ 0.000000] On node 0 totalpages: 2096955
> [ 0.000000] DMA zone: 56 pages used for memmap
> [ 0.000000] DMA zone: 1256 pages reserved
> [ 0.000000] DMA zone: 2683 pages, LIFO batch:0
> [ 0.000000] DMA32 zone: 14280 pages used for memmap
> [ 0.000000] DMA32 zone: 833496 pages, LIFO batch:31
> [ 0.000000] Normal zone: 17024 pages used for memmap
> [ 0.000000] Normal zone: 1228160 pages, LIFO batch:31
> [ 0.000000] Movable zone: 0 pages used for memmap
> [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
> [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] ACPI: IRQ14 used by override.
> [ 0.000000] ACPI: IRQ15 used by override.
> [ 0.000000] Setting APIC routing to flat
> [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] PM: Registered nosave memory: 000000000009b000 -
> 000000000009c000
> [ 0.000000] PM: Registered nosave memory: 000000000009c000 -
> 00000000000a0000
> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
> 00000000000e0000
> [ 0.000000] PM: Registered nosave memory: 00000000000e0000 -
> 0000000000100000
> [ 0.000000] PM: Registered nosave memory: 00000000cffa0000 -
> 00000000cffae000
> [ 0.000000] PM: Registered nosave memory: 00000000cffae000 -
> 00000000cfff0000
> [ 0.000000] PM: Registered nosave memory: 00000000cfff0000 -
> 00000000d0000000
> [ 0.000000] PM: Registered nosave memory: 00000000d0000000 -
> 00000000fec00000
> [ 0.000000] PM: Registered nosave memory: 00000000fec00000 -
> 00000000fec01000
> [ 0.000000] PM: Registered nosave memory: 00000000fec01000 -
> 00000000fee00000
> [ 0.000000] PM: Registered nosave memory: 00000000fee00000 -
> 00000000fee01000
> [ 0.000000] PM: Registered nosave memory: 00000000fee01000 -
> 00000000fff00000
> [ 0.000000] PM: Registered nosave memory: 00000000fff00000 -
> 0000000100000000
> [ 0.000000] Allocating PCI resources starting at d4000000 (gap:
> d0000000:2ec00000)
> [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
> [ 0.000000] PERCPU: Allocating 37168 bytes of per cpu data
> [ 0.000000] NR_CPUS: 32, nr_cpu_ids: 4
> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
> pages: 2064339
> [ 0.000000] Policy zone: Normal
> [ 0.000000] Kernel command line: root=/dev/mapper/xenhost-root ro quiet
> [ 0.000000] Initializing CPU#0
> [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
> [ 0.000000] TSC calibrated against PM_TIMER
> [ 0.000000] time.c: Detected 2333.293 MHz processor.
> [ 0.004000] spurious 8259A interrupt: IRQ7.
> [ 0.004000] Console: colour VGA+ 80x25
> [ 0.004000] console [tty0] enabled
> [ 0.004000] Checking aperture...
> [ 0.004000] Calgary: detecting Calgary via BIOS EBDA area
> [ 0.004000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
> [ 0.004000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> [ 0.004000] Placing software IO TLB between 0x4000000 - 0x8000000
> [ 0.004000] Memory: 8192680k/9175040k available (2229k kernel code,
> 195140k reserved, 1084k data, 392k init)
> [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
> [ 0.004000] hpet clockevent registered
> [ 0.083840] Calibrating delay using timer specific routine.. 4671.46
> BogoMIPS (lpj=9342927)
> [ 0.083878] Security Framework initialized
> [ 0.083884] SELinux: Disabled at boot.
> [ 0.083887] Capability LSM initialized
> [ 0.084005] Dentry cache hash table entries: 1048576 (order: 11, 8388608
> bytes)
> [ 0.088005] Inode-cache hash table entries: 524288 (order: 10, 4194304
> bytes)
> [ 0.090266] Mount-cache hash table entries: 256
> [ 0.090428] Initializing cgroup subsys ns
> [ 0.090433] Initializing cgroup subsys cpuacct
> [ 0.090436] Initializing cgroup subsys devices
> [ 0.090457] CPU: L1 I cache: 32K, L1 D cache: 32K
> [ 0.090459] CPU: L2 cache: 2048K
> [ 0.090461] CPU 0/0 -> Node 0
> [ 0.090462] CPU: Physical Processor ID: 0
> [ 0.090463] CPU: Processor Core ID: 0
> [ 0.090471] CPU0: Thermal monitoring enabled (TM2)
> [ 0.090472] using mwait in idle threads.
> [ 0.091391] ACPI: Core revision 20080321
> [ 0.142651] CPU0: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping
> 07
> [ 0.142654] Using local APIC timer interrupts.
> [ 0.148009] APIC timer calibration result 20833012
> [ 0.148009] Detected 20.833 MHz APIC timer.
> [ 0.148009] Booting processor 1/1 ip 6000
> [ 0.156009] Initializing CPU#1
> [ 0.156009] Calibrating delay using timer specific routine.. 4666.64
> BogoMIPS (lpj=9333287)
> [ 0.156009] CPU: L1 I cache: 32K, L1 D cache: 32K
> [ 0.156009] CPU: L2 cache: 2048K
> [ 0.156009] CPU 1/1 -> Node 0
> [ 0.156009] CPU: Physical Processor ID: 0
> [ 0.156009] CPU: Processor Core ID: 1
> [ 0.156009] CPU1: Thermal monitoring enabled (TM2)
> [ 0.236014] CPU1: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping
> 07
> [ 0.236014] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
> [ 0.240015] Booting processor 2/2 ip 6000
> [ 0.248015] Initializing CPU#2
> [ 0.248015] Calibrating delay using timer specific routine.. 4666.71
> BogoMIPS (lpj=9333433)
> [ 0.248015] CPU: L1 I cache: 32K, L1 D cache: 32K
> [ 0.248015] CPU: L2 cache: 2048K
> [ 0.248015] CPU 2/2 -> Node 0
> [ 0.248015] CPU: Physical Processor ID: 0
> [ 0.248015] CPU: Processor Core ID: 2
> [ 0.248015] CPU2: Thermal monitoring enabled (TM2)
> [ 0.327750] CPU2: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping
> 07
> [ 0.327772] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
> [ 0.332020] Booting processor 3/3 ip 6000
> [ 0.340021] Initializing CPU#3
> [ 0.340021] Calibrating delay using timer specific routine.. 4666.67
> BogoMIPS (lpj=9333345)
> [ 0.340021] CPU: L1 I cache: 32K, L1 D cache: 32K
> [ 0.340021] CPU: L2 cache: 2048K
> [ 0.340021] CPU 3/3 -> Node 0
> [ 0.340021] CPU: Physical Processor ID: 0
> [ 0.340021] CPU: Processor Core ID: 3
> [ 0.340021] CPU3: Thermal monitoring enabled (TM2)
> [ 0.419670] CPU3: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz stepping
> 07
> [ 0.419692] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
> [ 0.424026] Brought up 4 CPUs
> [ 0.424026] Total of 4 processors activated (18671.49 BogoMIPS).
> [ 0.424026] CPU0 attaching sched-domain:
> [ 0.424026] domain 0: span 0-1
> [ 0.424026] groups: 0 1
> [ 0.424026] domain 1: span 0-3
> [ 0.424026] groups: 0-1 2-3
> [ 0.424026] domain 2: span 0-3
> [ 0.424026] groups: 0-3
> [ 0.424026] CPU1 attaching sched-domain:
> [ 0.424026] domain 0: span 0-1
> [ 0.424026] groups: 1 0
> [ 0.424026] domain 1: span 0-3
> [ 0.424026] groups: 0-1 2-3
> [ 0.424026] domain 2: span 0-3
> [ 0.424026] groups: 0-3
> [ 0.424026] CPU2 attaching sched-domain:
> [ 0.424026] domain 0: span 2-3
> [ 0.424026] groups: 2 3
> [ 0.424026] domain 1: span 0-3
> [ 0.424026] groups: 2-3 0-1
> [ 0.424026] domain 2: span 0-3
> [ 0.424026] groups: 0-3
> [ 0.424026] CPU3 attaching sched-domain:
> [ 0.424026] domain 0: span 2-3
> [ 0.424026] groups: 3 2
> [ 0.424026] domain 1: span 0-3
> [ 0.424026] groups: 2-3 0-1
> [ 0.424026] domain 2: span 0-3
> [ 0.424026] groups: 0-3
> [ 0.424026] net_namespace: 1224 bytes
> [ 0.424026] Booting paravirtualized kernel on bare hardware
> [ 0.424026] NET: Registered protocol family 16
> [ 0.424026] ACPI: bus type pci registered
> [ 0.424026] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 -
> 255
> [ 0.424026] PCI: Not using MMCONFIG.
> [ 0.424026] PCI: Using configuration type 1 for base access
> [ 0.428602] ACPI: EC: Look up EC in DSDT
> [ 0.447520] ACPI: Interpreter enabled
> [ 0.447523] ACPI: (supports S0 S1 S3 S4 S5)
> [ 0.447539] ACPI: Using IOAPIC for interrupt routing
> [ 0.447606] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 -
> 255
> [ 0.458906] PCI: MCFG area at e0000000 reserved in ACPI motherboard
> resources
> [ 0.470851] PCI: Using MMCONFIG at e0000000 - efffffff
> [ 0.496070] ACPI: PCI Root Bridge [PCI0] (0000:00)
> [ 0.500771] PCI: Transparent bridge - 0000:00:09.0
> [ 0.501341] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> [ 0.501682] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBB0._PRT]
> [ 0.501898] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
> [ 0.502068] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
> [ 0.502230] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
> [ 0.502391] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
> [ 0.502551] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
> [ 0.523244] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.523244] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.523244] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.523569] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.525530] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *7
> [ 0.525866] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.526188] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.526509] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.526829] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.527150] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.527470] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.527791] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.528113] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.528434] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.528754] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.529078] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.529398] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.529719] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.530040] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.530361] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.530682] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.531002] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.531325] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.531646] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.531971] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *10
> [ 0.532292] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.532613] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.532878] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.533202] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.533533] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.533854] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.534175] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0,
> disabled.
> [ 0.534500] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *9
> [ 0.534826] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *15
> [ 0.535150] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *15
> [ 0.535476] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *9
> [ 0.535797] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *0,
> disabled.
> [ 0.536123] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
> [ 0.536447] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *11
> [ 0.536772] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
> [ 0.537156] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0,
> disabled.
> [ 0.537507] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *10
> [ 0.537832] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *11
> [ 0.538158] ACPI: PCI Interrupt Link [LRP0] (IRQs 20 21 22 23) *10
> [ 0.538483] ACPI: PCI Interrupt Link [LRP1] (IRQs 20 21 22 23) *0,
> disabled.
> [ 0.538805] ACPI: PCI Interrupt Link [LRP2] (IRQs 20 21 22 23) *0,
> disabled.
> [ 0.539133] ACPI: PCI Interrupt Link [LRP3] (IRQs 20 21 22 23) *11
> [ 0.539462] ACPI: PCI Interrupt Link [LRP4] (IRQs 20 21 22 23) *9
> [ 0.539788] ACPI: PCI Interrupt Link [LRP5] (IRQs 20 21 22 23) *15
> [ 0.540118] ACPI: PCI Interrupt Link [LRP6] (IRQs 20 21 22 23) *14
> [ 0.540903] Linux Plug and Play Support v0.97 (c) Adam Belay
> [ 0.540903] pnp: PnP ACPI init
> [ 0.540903] ACPI: bus type pnp registered
> [ 0.540903] pnp 00:00: parse allocated resources
> [ 0.540903] pnp 00:00: add io 0xcf8-0xcff flags 0x1
> [ 0.540903] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
> [ 0.540903] pnp 00:01: parse allocated resources
> [ 0.540903] pnp 00:01: add dma 4 flags 0x4
> [ 0.540903] pnp 00:01: add io 0x0-0xf flags 0x1
> [ 0.540903] pnp 00:01: add io 0x81-0x83 flags 0x1
> [ 0.540903] pnp 00:01: add io 0x87-0x87 flags 0x1
> [ 0.540903] pnp 00:01: add io 0x89-0x8b flags 0x1
> [ 0.540903] pnp 00:01: add io 0x8f-0x8f flags 0x1
> [ 0.540903] pnp 00:01: add io 0xc0-0xdf flags 0x1
> [ 0.540915] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
> [ 0.540926] pnp 00:02: parse allocated resources
> [ 0.540930] pnp 00:02: add io 0x61-0x61 flags 0x1
> [ 0.544903] pnp 00:02: Plug and Play ACPI device, IDs PNP0800 (active)
> [ 0.544903] pnp 00:03: parse allocated resources
> [ 0.544903] pnp 00:03: add io 0xf0-0xff flags 0x1
> [ 0.544903] pnp 00:03: add irq 13 flags 0x1
> [ 0.544903] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
> [ 0.544903] pnp 00:04: parse allocated resources
> [ 0.544903] pnp 00:04: add io 0x10-0x1f flags 0x1
> [ 0.544903] pnp 00:04: add io 0x22-0x3f flags 0x1
> [ 0.544903] pnp 00:04: add io 0x44-0x4d flags 0x1
> [ 0.544903] pnp 00:04: add io 0x50-0x5f flags 0x1
> [ 0.544903] pnp 00:04: add io 0x62-0x63 flags 0x1
> [ 0.544903] pnp 00:04: add io 0x65-0x6f flags 0x1
> [ 0.544903] pnp 00:04: add io 0x72-0x7f flags 0x1
> [ 0.544903] pnp 00:04: add io 0x80-0x80 flags 0x1
> [ 0.544903] pnp 00:04: add io 0x84-0x86 flags 0x1
> [ 0.544903] pnp 00:04: add io 0x88-0x88 flags 0x1
> [ 0.544903] pnp 00:04: add io 0x8c-0x8e flags 0x1
> [ 0.544903] pnp 00:04: add io 0x90-0x9f flags 0x1
> [ 0.544903] pnp 00:04: add io 0xa2-0xbf flags 0x1
> [ 0.544903] pnp 00:04: add io 0xe0-0xef flags 0x1
> [ 0.544903] pnp 00:04: add io 0x4d0-0x4d1 flags 0x1
> [ 0.544903] pnp 00:04: add io 0x800-0x80f flags 0x1
> [ 0.544903] pnp 00:04: add io 0x4000-0x407f flags 0x1
> [ 0.544903] pnp 00:04: add io 0x4080-0x40ff flags 0x1
> [ 0.544903] pnp 00:04: add io 0x4400-0x447f flags 0x1
> [ 0.544903] pnp 00:04: add io 0x4480-0x44ff flags 0x1
> [ 0.544903] pnp 00:04: add io 0x4800-0x487f flags 0x1
> [ 0.544903] pnp 00:04: add io 0x4880-0x48ff flags 0x1
> [ 0.544903] pnp 00:04: add mem 0x0-0xffffffffffffffff flags 0x10000000
> [ 0.544903] pnp 00:04: add mem 0xfefe2000-0xfefe3fff flags 0x0
> [ 0.544903] pnp 00:04: add mem 0xfefe1000-0xfefe1fff flags 0x0
> [ 0.544903] pnp 00:04: add mem 0xfee01000-0xfeefffff flags 0x0
> [ 0.544903] pnp 00:04: PNP0c02: calling
> quirk_system_pci_resources+0x0/0x15c
> [ 0.544903] pnp 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.544903] pnp 00:05: parse allocated resources
> [ 0.544903] pnp 00:05: add mem 0xfed00000-0xfed00fff flags 0x1
> [ 0.544903] pnp 00:05: add irq 8 flags 0x1
> [ 0.544903] pnp 00:05: Plug and Play ACPI device, IDs PNP0103 (active)
> [ 0.544903] pnp 00:06: parse allocated resources
> [ 0.544903] pnp 00:06: add io 0x70-0x71 flags 0x1
> [ 0.544903] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
> [ 0.544903] pnp 00:07: parse allocated resources
> [ 0.544903] pnp 00:07: add mem 0xfec00000-0xfec00fff flags 0x0
> [ 0.544903] pnp 00:07: add mem 0xfee00000-0xfee00fff flags 0x0
> [ 0.544903] pnp 00:07: PNP0c02: calling
> quirk_system_pci_resources+0x0/0x15c
> [ 0.544903] pnp 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.544903] pnp 00:08: parse allocated resources
> [ 0.544903] pnp 00:08: add io 0x60-0x60 flags 0x1
> [ 0.544903] pnp 00:08: add io 0x64-0x64 flags 0x1
> [ 0.544903] pnp 00:08: add irq 1 flags 0x1
> [ 0.548903] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b
> (active)
> [ 0.548903] pnp 00:09: parse allocated resources
> [ 0.548903] pnp 00:09: add irq 12 flags 0x1
> [ 0.548903] pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13
> (active)
> [ 0.548903] pnp 00:0a: parse allocated resources
> [ 0.548903] pnp 00:0a: add io 0x0-0xffffffffffffffff flags 0x10000001
> [ 0.548903] pnp 00:0a: add io 0xa00-0xa0f flags 0x1
> [ 0.548903] pnp 00:0a: add io 0xa10-0xa1f flags 0x1
> [ 0.548903] pnp 00:0a: add io 0xa20-0xa2f flags 0x1
> [ 0.548903] pnp 00:0a: add io 0xa30-0xa3f flags 0x1
> [ 0.548903] pnp 00:0a: PNP0c02: calling
> quirk_system_pci_resources+0x0/0x15c
> [ 0.548903] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.548903] pnp 00:0b: parse allocated resources
> [ 0.548903] pnp 00:0b: add mem 0xe0000000-0xefffffff flags 0x0
> [ 0.548903] pnp 00:0b: PNP0c02: calling
> quirk_system_pci_resources+0x0/0x15c
> [ 0.548903] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.548903] pnp 00:0c: parse allocated resources
> [ 0.548903] pnp 00:0c: add mem 0x0-0x9ffff flags 0x1
> [ 0.548903] pnp 00:0c: add mem 0xc0000-0xcffff flags 0x0
> [ 0.548903] pnp 00:0c: add mem 0xe0000-0xfffff flags 0x0
> [ 0.548903] pnp 00:0c: add mem 0x100000-0xcfffffff flags 0x1
> [ 0.548903] pnp 00:0c: add mem 0xfec00000-0xffffffff flags 0x0
> [ 0.548903] pnp 00:0c: PNP0c01: calling
> quirk_system_pci_resources+0x0/0x15c
> [ 0.548903] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
> [ 0.554581] pnp: PnP ACPI: found 13 devices
> [ 0.554581] ACPI: ACPI bus type pnp unregistered
> [ 0.554581] usbcore: registered new interface driver usbfs
> [ 0.554581] usbcore: registered new interface driver hub
> [ 0.554581] usbcore: registered new device driver usb
> [ 0.554581] PCI: Using ACPI for IRQ routing
> [ 0.571245] PCI-GART: No AMD northbridge found.
> [ 0.571253] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
> [ 0.571257] hpet0: 4 64-bit timers, 25000000 Hz
> [ 0.575216] ACPI: RTC can wake from S4
> [ 0.578101] Switched to high resolution mode on CPU 0
> [ 0.578546] Switched to high resolution mode on CPU 1
> [ 0.578551] Switched to high resolution mode on CPU 3
> [ 0.579207] Switched to high resolution mode on CPU 2
> [ 0.590046] pnp: the driver 'system' has been registered
> [ 0.590059] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
> [ 0.590062] system 00:04: ioport range 0x800-0x80f has been reserved
> [ 0.590064] system 00:04: ioport range 0x4000-0x407f has been reserved
> [ 0.590067] system 00:04: ioport range 0x4080-0x40ff has been reserved
> [ 0.590070] system 00:04: ioport range 0x4400-0x447f has been reserved
> [ 0.590072] system 00:04: ioport range 0x4480-0x44ff has been reserved
> [ 0.590075] system 00:04: ioport range 0x4800-0x487f has been reserved
> [ 0.590077] system 00:04: ioport range 0x4880-0x48ff has been reserved
> [ 0.590080] system 00:04: iomem range 0xfefe2000-0xfefe3fff has been
> reserved
> [ 0.590083] system 00:04: iomem range 0xfefe1000-0xfefe1fff has been
> reserved
> [ 0.590085] system 00:04: iomem range 0xfee01000-0xfeefffff has been
> reserved
> [ 0.590087] system 00:04: driver attached
> [ 0.590094] system 00:07: iomem range 0xfec00000-0xfec00fff could not be
> reserved
> [ 0.590096] system 00:07: iomem range 0xfee00000-0xfee00fff could not be
> reserved
> [ 0.590099] system 00:07: driver attached
> [ 0.590105] system 00:0a: ioport range 0xa00-0xa0f has been reserved
> [ 0.590108] system 00:0a: ioport range 0xa10-0xa1f has been reserved
> [ 0.590110] system 00:0a: ioport range 0xa20-0xa2f has been reserved
> [ 0.590112] system 00:0a: ioport range 0xa30-0xa3f has been reserved
> [ 0.590115] system 00:0a: driver attached
> [ 0.590120] system 00:0b: iomem range 0xe0000000-0xefffffff has been
> reserved
> [ 0.590122] system 00:0b: driver attached
> [ 0.590127] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
> [ 0.590130] system 00:0c: iomem range 0xc0000-0xcffff has been reserved
> [ 0.590133] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
> [ 0.590135] system 00:0c: iomem range 0x100000-0xcfffffff could not be
> reserved
> [ 0.590138] system 00:0c: iomem range 0xfec00000-0xffffffff could not be
> reserved
> [ 0.590140] system 00:0c: driver attached
> [ 0.593429] PCI: Bridge: 0000:00:09.0
> [ 0.593429] IO window: disabled.
> [ 0.593429] MEM window: disabled.
> [ 0.593429] PREFETCH window: disabled.
> [ 0.593429] PCI: Bridge: 0000:00:0c.0
> [ 0.593429] IO window: e000-efff
> [ 0.593429] MEM window: 0xfa000000-0xfeafffff
> [ 0.593429] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
> [ 0.593429] PCI: Bridge: 0000:00:15.0
> [ 0.593429] IO window: disabled.
> [ 0.593429] MEM window: disabled.
> [ 0.593429] PREFETCH window: disabled.
> [ 0.593429] PCI: Bridge: 0000:00:16.0
> [ 0.593429] IO window: disabled.
> [ 0.593429] MEM window: disabled.
> [ 0.593429] PREFETCH window: disabled.
> [ 0.593429] PCI: Bridge: 0000:00:17.0
> [ 0.593429] IO window: disabled.
> [ 0.593429] MEM window: 0xfeb00000-0xfebfffff
> [ 0.593429] PREFETCH window: disabled.
> [ 0.593429] PCI: Bridge: 0000:00:18.0
> [ 0.593429] IO window: disabled.
> [ 0.593429] MEM window: disabled.
> [ 0.593429] PREFETCH window: disabled.
> [ 0.593429] PCI: Setting latency timer of device 0000:00:09.0 to 64
> [ 0.593429] ACPI: PCI Interrupt Link [LRP0] enabled at IRQ 23
> [ 0.593429] ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LRP0] -> GSI 23
> (level, low) -> IRQ 23
> [ 0.593430] PCI: Setting latency timer of device 0000:00:0c.0 to 64
> [ 0.593430] ACPI: PCI Interrupt Link [LRP3] enabled at IRQ 22
> [ 0.593430] ACPI: PCI Interrupt 0000:00:15.0[A] -> Link [LRP3] -> GSI 22
> (level, low) -> IRQ 22
> [ 0.593430] PCI: Setting latency timer of device 0000:00:15.0 to 64
> [ 0.593430] ACPI: PCI Interrupt Link [LRP4] enabled at IRQ 21
> [ 0.593430] ACPI: PCI Interrupt 0000:00:16.0[A] -> Link [LRP4] -> GSI 21
> (level, low) -> IRQ 21
> [ 0.593430] PCI: Setting latency timer of device 0000:00:16.0 to 64
> [ 0.593430] ACPI: PCI Interrupt Link [LRP5] enabled at IRQ 20
> [ 0.593430] ACPI: PCI Interrupt 0000:00:17.0[A] -> Link [LRP5] -> GSI 20
> (level, low) -> IRQ 20
> [ 0.593430] PCI: Setting latency timer of device 0000:00:17.0 to 64
> [ 0.593430] ACPI: PCI Interrupt Link [LRP6] enabled at IRQ 23
> [ 0.593430] ACPI: PCI Interrupt 0000:00:18.0[A] -> Link [LRP6] -> GSI 23
> (level, low) -> IRQ 23
> [ 0.593430] PCI: Setting latency timer of device 0000:00:18.0 to 64
> [ 0.593430] NET: Registered protocol family 2
> [ 0.642185] IP route cache hash table entries: 262144 (order: 9, 2097152
> bytes)
> [ 0.644364] TCP established hash table entries: 524288 (order: 11, 8388608
> bytes)
> [ 0.648894] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> [ 0.649453] TCP: Hash tables configured (established 524288 bind 65536)
> [ 0.649456] TCP reno registered
> [ 0.658058] NET: Registered protocol family 1
> [ 0.658160] checking if image is initramfs... it is
> [ 1.186404] Freeing initrd memory: 7350k freed
> [ 1.191507] audit: initializing netlink socket (disabled)
> [ 1.191507] type=2000 audit(1294606162.172:1): initialized
> [ 1.201065] Total HugeTLB memory allocated, 0
> [ 1.201065] VFS: Disk quotas dquot_6.5.1
> [ 1.201065] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [ 1.201065] msgmni has been set to 16015
> [ 1.201065] Block layer SCSI generic (bsg) driver version 0.4 loaded
> (major 253)
> [ 1.201065] io scheduler noop registered
> [ 1.201065] io scheduler anticipatory registered
> [ 1.201065] io scheduler deadline registered
> [ 1.201065] io scheduler cfq registered (default)
> [ 1.272051] pci 0000:02:00.0: Boot video device
> [ 1.272968] PCI: Setting latency timer of device 0000:00:0c.0 to 64
> [ 1.272968] assign_interrupt_mode Found MSI capability
> [ 1.272968] Allocate Port Service[0000:00:0c.0:pcie00]
> [ 1.272968] PCI: Setting latency timer of device 0000:00:15.0 to 64
> [ 1.272968] assign_interrupt_mode Found MSI capability
> [ 1.272968] Allocate Port Service[0000:00:15.0:pcie00]
> [ 1.272968] PCI: Setting latency timer of device 0000:00:16.0 to 64
> [ 1.272968] assign_interrupt_mode Found MSI capability
> [ 1.272968] Allocate Port Service[0000:00:16.0:pcie00]
> [ 1.272968] PCI: Setting latency timer of device 0000:00:17.0 to 64
> [ 1.272968] assign_interrupt_mode Found MSI capability
> [ 1.272968] Allocate Port Service[0000:00:17.0:pcie00]
> [ 1.272968] PCI: Setting latency timer of device 0000:00:18.0 to 64
> [ 1.273122] assign_interrupt_mode Found MSI capability
> [ 1.273122] Allocate Port Service[0000:00:18.0:pcie00]
> [ 1.278234] hpet_resources: 0xfed00000 is busy
> [ 1.278234] Linux agpgart interface v0.103
> [ 1.278234] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
> sharing enabled
> [ 1.278234] pnp: the driver 'serial' has been registered
> [ 1.282230] brd: module loaded
> [ 1.282230] input: Macintosh mouse button emulation as /class/input/input0
> [ 1.282230] pnp: the driver 'i8042 kbd' has been registered
> [ 1.282230] i8042 kbd 00:08: driver attached
> [ 1.282230] pnp: the driver 'i8042 aux' has been registered
> [ 1.282230] i8042 aux 00:09: driver attached
> [ 1.282230] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64
> irq 1,12
> [ 1.282230] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 1.282230] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 1.302218] mice: PS/2 mouse device common for all mice
> [ 1.302218] pnp: the driver 'rtc_cmos' has been registered
> [ 1.302218] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
> [ 1.302218] rtc0: alarms up to one year, y3k
> [ 1.302218] rtc_cmos 00:06: driver attached
> [ 1.302218] cpuidle: using governor ladder
> [ 1.302218] cpuidle: using governor menu
> [ 1.302218] No iBFT detected.
> [ 1.302563] TCP cubic registered
> [ 1.302563] NET: Registered protocol family 17
> [ 1.302563] registered taskstats version 1
> [ 1.302563] rtc_cmos 00:06: setting system clock to 2011-01-09 20:49:22
> UTC (1294606162)
> [ 1.302563] Freeing unused kernel memory: 392k freed
> [ 1.326091] input: AT Translated Set 2 keyboard as /class/input/input1
> [ 1.379078] ACPI: SSDT CFFAE3A0, 01F3 (r1 DpgPmm P001Ist 11 INTL
> 20051117)
> [ 1.379078] ACPI: ACPI0007:00 is registered as cooling_device0
> [ 1.379078] ACPI: Processor [P001] (supports 8 throttling states)
> [ 1.379078] ACPI: SSDT CFFAE5A0, 01F3 (r1 DpgPmm P002Ist 12 INTL
> 20051117)
> [ 1.379078] ACPI: ACPI0007:01 is registered as cooling_device1
> [ 1.379078] ACPI: SSDT CFFAE7A0, 01F3 (r1 DpgPmm P003Ist 12 INTL
> 20051117)
> [ 1.379078] ACPI: ACPI0007:02 is registered as cooling_device2
> [ 1.379337] ACPI: SSDT CFFAE9A0, 01F3 (r1 DpgPmm P004Ist 12 INTL
> 20051117)
> [ 1.383072] ACPI: ACPI0007:03 is registered as cooling_device3
> [ 1.383072] ACPI: LNXTHERM:01 is registered as thermal_zone0
> [ 1.383072] ACPI: Thermal Zone [THRM] (33 C)
> [ 1.555546] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
> [ 1.555549] ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [LUB2] -> GSI 22
> (level, low) -> IRQ 22
> [ 1.555565] PCI: Setting latency timer of device 0000:00:04.1 to 64
> [ 1.555568] ehci_hcd 0000:00:04.1: EHCI Host Controller
> [ 1.556086] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus
> number 1
> [ 1.556086] ehci_hcd 0000:00:04.1: debug port 1
> [ 1.556086] PCI: cache line size of 32 is not supported by device
> 0000:00:04.1
> [ 1.556086] ehci_hcd 0000:00:04.1: irq 22, io mem 0xf9f7ec00
> [ 1.556731] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI)
> Driver
> [ 1.560731] No dock devices found.
> [ 1.564883] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10
> Dec 2004
> [ 1.564968] usb usb1: configuration #1 chosen from 1 choice
> [ 1.564995] hub 1-0:1.0: USB hub found
> [ 1.565003] hub 1-0:1.0: 6 ports detected
> [ 1.568731] SCSI subsystem initialized
> [ 1.580731] libata version 3.00 loaded.
> [ 1.673459] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> [ 1.673459] usb usb1: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 1.673459] usb usb1: Product: EHCI Host Controller
> [ 1.673459] usb usb1: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd
> [ 1.673459] usb usb1: SerialNumber: 0000:00:04.1
> [ 1.673459] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 21
> [ 1.673459] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [UB12] -> GSI 21
> (level, low) -> IRQ 21
> [ 1.673459] PCI: Setting latency timer of device 0000:00:06.1 to 64
> [ 1.673459] ehci_hcd 0000:00:06.1: EHCI Host Controller
> [ 1.673459] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus
> number 2
> [ 1.673459] ehci_hcd 0000:00:06.1: debug port 1
> [ 1.673459] PCI: cache line size of 32 is not supported by device
> 0000:00:06.1
> [ 1.673459] ehci_hcd 0000:00:06.1: irq 21, io mem 0xf9f7e800
> [ 1.689454] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00, driver 10
> Dec 2004
> [ 1.689512] usb usb2: configuration #1 chosen from 1 choice
> [ 1.689537] hub 2-0:1.0: USB hub found
> [ 1.689543] hub 2-0:1.0: 6 ports detected
> [ 1.792316] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
> [ 1.792319] usb usb2: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 1.792321] usb usb2: Product: EHCI Host Controller
> [ 1.792323] usb usb2: Manufacturer: Linux 2.6.26-2-amd64 ehci_hcd
> [ 1.792324] usb usb2: SerialNumber: 0000:00:06.1
> [ 1.793464] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20
> [ 1.793464] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LUB0] -> GSI 20
> (level, low) -> IRQ 20
> [ 1.793464] PCI: Setting latency timer of device 0000:00:04.0 to 64
> [ 1.793464] ohci_hcd 0000:00:04.0: OHCI Host Controller
> [ 1.793464] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus
> number 3
> [ 1.793464] ohci_hcd 0000:00:04.0: irq 20, io mem 0xf9f7f000
> [ 1.855515] usb usb3: configuration #1 chosen from 1 choice
> [ 1.855538] hub 3-0:1.0: USB hub found
> [ 1.855544] hub 3-0:1.0: 6 ports detected
> [ 1.957533] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
> [ 1.957536] usb usb3: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 1.957538] usb usb3: Product: OHCI Host Controller
> [ 1.957540] usb usb3: Manufacturer: Linux 2.6.26-2-amd64 ohci_hcd
> [ 1.957541] usb usb3: SerialNumber: 0000:00:04.0
> [ 1.961464] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 23
> [ 1.961464] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [UB11] -> GSI 23
> (level, low) -> IRQ 23
> [ 1.961464] PCI: Setting latency timer of device 0000:00:06.0 to 64
> [ 1.961464] ohci_hcd 0000:00:06.0: OHCI Host Controller
> [ 1.961464] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus
> number 4
> [ 1.961464] ohci_hcd 0000:00:06.0: irq 23, io mem 0xf9f7d000
> [ 2.015521] usb usb4: configuration #1 chosen from 1 choice
> [ 2.015543] hub 4-0:1.0: USB hub found
> [ 2.015549] hub 4-0:1.0: 6 ports detected
> [ 2.105477] usb 2-3: new high speed USB device using ehci_hcd and address 2
> [ 2.117542] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
> [ 2.117545] usb usb4: New USB device strings: Mfr=3, Product=2,
> SerialNumber=1
> [ 2.117547] usb usb4: Product: OHCI Host Controller
> [ 2.117549] usb usb4: Manufacturer: Linux 2.6.26-2-amd64 ohci_hcd
> [ 2.117550] usb usb4: SerialNumber: 0000:00:06.0
> [ 2.121473] forcedeth: Reverse Engineered nForce ethernet driver. Version
> 0.61.
> [ 2.121473] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
> [ 2.121473] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] -> GSI 22
> (level, low) -> IRQ 22
> [ 2.121473] PCI: Setting latency timer of device 0000:00:0a.0 to 64
> [ 2.270386] usb 2-3: config 1 interface 1 altsetting 0 endpoint 0x83 has
> an invalid bInterval 30, changing to 8
> [ 2.275186] usb 2-3: configuration #1 chosen from 1 choice
> [ 2.278384] usb 2-3: New USB device found, idVendor=0bda, idProduct=0152
> [ 2.278384] usb 2-3: New USB device strings: Mfr=1, Product=2,
> SerialNumber=3
> [ 2.278384] usb 2-3: Product: USB2.0-CRW
> [ 2.278384] usb 2-3: Manufacturer: Generic
> [ 2.278384] usb 2-3: SerialNumber: 20060413092100000
> [ 2.300419] Initializing USB Mass Storage driver...
> [ 2.801910] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr
> 00:22:68:3a:6a:b7
> [ 2.801914] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt timirq gbit
> lnktim msi desc-v3
> [ 2.801910] ahci 0000:00:0b.0: version 3.0
> [ 2.801910] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 21
> [ 2.801910] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LSA0] -> GSI 21
> (level, low) -> IRQ 21
> [ 2.950553] usb 3-4: new low speed USB device using ohci_hcd and address 2
> [ 3.169044] usb 3-4: configuration #1 chosen from 1 choice
> [ 3.169044] usb 3-4: New USB device found, idVendor=04eb, idProduct=e030
> [ 3.169044] usb 3-4: New USB device strings: Mfr=1, Product=2,
> SerialNumber=0
> [ 3.169044] usb 3-4: Product: Media Center Interface
> [ 3.169044] usb 3-4: Manufacturer: Device
> [ 3.517035] usb 4-4: new low speed USB device using ohci_hcd and address 2
> [ 3.905098] usb 4-4: configuration #1 chosen from 1 choice
> [ 3.922229] usb 4-4: New USB device found, idVendor=04eb, idProduct=e033
> [ 3.922231] usb 4-4: New USB device strings: Mfr=1, Product=2,
> SerialNumber=3
> [ 3.922233] usb 4-4: Product: eHome Infrared Transceiver
> [ 3.922235] usb 4-4: Manufacturer: Northstar System Corp.
> [ 3.922236] usb 4-4: SerialNumber: SN:CIR-00080612011700000000
> [ 3.922229] usbcore: registered new interface driver hiddev
> [ 3.925096] scsi0 : SCSI emulation for USB Mass Storage devices
> [ 3.925096] usb-storage: device found at 2
> [ 3.925096] usb-storage: waiting for device to settle before scanning
> [ 4.086730] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f
> impl RAID mode
> [ 4.086734] ahci 0000:00:0b.0: flags: 64bit ncq sntf led pmp pio slum part
> [ 4.086737] PCI: Setting latency timer of device 0000:00:0b.0 to 64
> [ 4.090205] scsi1 : ahci
> [ 4.090703] scsi2 : ahci
> [ 4.090703] scsi3 : ahci
> [ 4.090703] scsi4 : ahci
> [ 4.090703] scsi5 : ahci
> [ 4.090703] scsi6 : ahci
> [ 4.090703] ata1: SATA max UDMA/133 abar m8192@0xf9f72000 port 0xf9f72100
> irq 1274
> [ 4.090703] ata2: SATA max UDMA/133 abar m8192@0xf9f72000 port 0xf9f72180
> irq 1274
> [ 4.090703] ata3: SATA max UDMA/133 abar m8192@0xf9f72000 port 0xf9f72200
> irq 1274
> [ 4.090703] ata4: SATA max UDMA/133 abar m8192@0xf9f72000 port 0xf9f72280
> irq 1274
> [ 4.090703] ata5: SATA max UDMA/133 abar m8192@0xf9f72000 port 0xf9f72300
> irq 1274
> [ 4.090703] ata6: SATA max UDMA/133 abar m8192@0xf9f72000 port 0xf9f72380
> irq 1274
> [ 4.657854] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 4.659284] ata1.00: ATA-8: WDC WD6400AAKS-22A7B2, 01.03B01, max UDMA/133
> [ 4.659284] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32)
> [ 4.659284] ata1.00: configured for UDMA/133
> [ 5.142274] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 5.142984] ata2.00: ATAPI: HL-DT-ST DVDRAM GH15F, EG00, max UDMA/100
> [ 5.142984] ata2.00: configured for UDMA/100
> [ 5.467117] ata3: SATA link down (SStatus 0 SControl 300)
> [ 6.082425] ata4: SATA link down (SStatus 0 SControl 300)
> [ 6.405773] ata5: SATA link down (SStatus 0 SControl 300)
> [ 6.725774] ata6: SATA link down (SStatus 0 SControl 300)
> [ 7.115290] scsi 1:0:0:0: Direct-Access ATA WDC WD6400AAKS-2 01.0
> PQ: 0 ANSI: 5
> [ 7.115290] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GH15F EG00
> PQ: 0 ANSI: 5
> [ 7.123737] ACPI: PCI Interrupt Link [LN5A] enabled at IRQ 19
> [ 7.123737] ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LN5A] -> GSI 19
> (level, low) -> IRQ 19
> [ 7.123737] PCI: Setting latency timer of device 0000:05:00.0 to 64
> [ 7.450413] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]
> MMIO=[febff800-febfffff] Max Packet=[2048] IR/IT contexts=[4/4]
> [ 7.467156] Driver 'sd' needs updating - please use bus_type methods
> [ 7.467156] sd 1:0:0:0: [sda] 1250263728 512-byte hardware sectors (640135
> MB)
> [ 7.467156] sd 1:0:0:0: [sda] Write Protect is off
> [ 7.467156] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 7.467156] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled,
> doesn't support DPO or FUA
> [ 7.467156] sd 1:0:0:0: [sda] 1250263728 512-byte hardware sectors (640135
> MB)
> [ 7.467156] sd 1:0:0:0: [sda] Write Protect is off
> [ 7.467156] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 7.467156] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled,
> doesn't support DPO or FUA
> [ 7.467156] sda:<4>Driver 'sr' needs updating - please use bus_type
> methods
> [ 7.484514] sda1 sda2
> [ 7.484644] sd 1:0:0:0: [sda] Attached SCSI disk
> [ 7.712076] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2
> cdda tray
> [ 7.712076] Uniform CD-ROM driver Revision: 3.20
> [ 7.712076] sr 2:0:0:0: Attached scsi CD-ROM sr0
> [ 7.721070] sd 1:0:0:0: Attached scsi generic sg0 type 0
> [ 7.721070] sr 2:0:0:0: Attached scsi generic sg1 type 5
> [ 9.251645] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00995efa00016c20]
> [ 11.721065] usb-storage: device scan complete
> [ 11.721065] scsi 0:0:0:0: Direct-Access Generic- Compact Flash 1.00
> PQ: 0 ANSI: 0 CCS
> [ 12.310563] sd 0:0:0:0: [sdb] Attached SCSI removable disk
> [ 12.310563] sd 0:0:0:0: Attached scsi generic sg2 type 0
> [ 17.887389] usbhid: timeout initializing reports
> [ 17.887444] hiddev96hidraw0: USB HID v1.11 Device [Generic USB2.0-CRW] on
> usb-0000:00:06.1-3
> [ 17.887477] usbcore: registered new interface driver usb-storage
> [ 17.887480] USB Mass Storage support registered.
> [ 18.452265] input: Device Media Center Interface as /class/input/input2
> [ 18.475646] input,hiddev97,hidraw1: USB HID v1.10 Keyboard [Device Media
> Center Interface] on usb-0000:00:04.0-4
> [ 18.483608] hiddev98hidraw2: USB HID v1.10 Device [Device Media Center
> Interface] on usb-0000:00:04.0-4
> [ 18.483626] usbcore: registered new interface driver usbhid
> [ 18.483629] usbhid: v2.6:USB HID core driver
> [ 18.559424] device-mapper: uevent: version 1.0.3
> [ 18.559458] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised:
> dm-devel@xxxxxxxxxx
> [ 18.682017] PM: Starting manual resume from disk
> [ 18.753394] kjournald starting. Commit interval 5 seconds
> [ 18.753394] EXT3-fs: mounted filesystem with ordered data mode.
> [ 19.766553] udevd version 125 started
> [ 20.072797] input: Power Button (FF) as /class/input/input3
> [ 20.165593] ACPI: Power Button (FF) [PWRF]
> [ 20.167337] input: Power Button (CM) as /class/input/input4
> [ 20.231290] ACPI: Power Button (CM) [PWRB]
> [ 20.233467] ACPI: WMI: Mapper loaded
> [ 20.381495] input: PC Speaker as /class/input/input5
> [ 20.398514] Error: Driver 'pcspkr' is already registered, aborting...
> [ 20.412651] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20
> [ 20.412654] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LAZA] -> GSI 20
> (level, low) -> IRQ 20
> [ 20.412672] PCI: Setting latency timer of device 0000:00:08.0 to 64
> [ 22.555585] EXT3 FS on dm-0, internal journal
> [ 23.159449] loop: module loaded
> [ 23.709327] Adding 24023032k swap on /dev/mapper/xenhost-swap_1.
> Priority:-1 extents:1 across:24023032k
> xenhost:~#
>
>
>
>
>
> From: vchampion@xxxxxxxxx
> Date: Sun, 9 Jan 2011 10:13:30 +0300
> Subject: Re: [Xen-users] (no subject)
> To: sawozny@xxxxxxxxxxx
> CC: Xen-users@xxxxxxxxxxxxxxxxxxx
>
> Hi!
>
>
> On which state the loading of xen kernel stops? What are you seeing on
> display in that moment?
> Can you put dmesg here?
>
>
> 2011/1/9 Scott A. Wozny <sawozny@xxxxxxxxxxx>
>
>
> OK, so after several weeks of trying to get various versions of Xen running
> of various distributions, I'm starting to wonder if I've got a hardware
> compatibility problem and as the system never really boots with the Xen
> kernel I've got no log files to tell me where the problem is. I was
> wondering if there's a way to compile from source with debug turned on,
> particularly for early boot problems, and where those logs get stored.
>
> In my research, it seems like everyone who has had problems getting Xen
> running has fixed it through errors reported during the compile process and
> correcting source files to match but I've been poring through the thousands
> of lines of output produced by the various makes I've been doing in different
> distro and source combinations and I can't find anything that says "You have
> a problem here". They just compile cleanly and then don't boot.
>
> Any and all suggestions would be greatly appreciated.
>
> Thanks,
>
> Scott
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
>
>
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home