I'm using the Zentyal, as a PVM domU.
First I install the Ubuntu 10.04 as a minimum virtual machine, after that I install the Zentyal and if all goes fine, I convert the domU from HVM do PVM.
On 8 December 2010 12:39, Chris Friesen <chris.friesen@xxxxxxxxxxxxxxxxxx> wrote:
I believe Smoothwall is a custom built Linux distro, not based off of any others.
And, as far as I know, it can't be run para-virtualized. I would be very interested if someone found a way to make it so.
ChrisOn Tue, Dec 7, 2010 at 10:22 AM, James Pifer <jep@xxxxxxxxxxxxxxxx> wrote:
Is anyone here running Smoothwall Appliance as a VM in Xen? We're
running it right now, but it's running fully virtualized instead of
para-virtualized. Anyone know if it can run as a PV?
It crashed yesterday with only a 100 user sessions on it. Not much in
the log except:
[2010-12-06 15:03:31 7341] WARNING (image:559) domain prxy3: device model failure: pid 22922: malfunctioning (closed sentinel), killed; see /var/log/xen/qemu-dm-prxy3.log
[2010-12-06 15:03:31 7341] WARNING (XendDomainInfo:2106) Domain has crashed: name=prxy3 id=15.
Our management package restarted the VM but found this
in /var/log/xen/qemu-dm-prxy3.log (see memory error at bottom):
cat /var/log/xen/qemu-dm-prxy3.log.1
domid: 15
config qemu network with xen bridge for tap15.0 br0
Watching /local/domain/0/device-model/15/logdirty/cmd
Watching /local/domain/0/device-model/15/command
qemu_map_cache_init nr_buckets = 10000 size 4194304
/usr/src/packages/BUILD/xen-4.0.0-testing/tools/ioemu-dir/hw/xen_blktap.c:715: Init blktap pipes
shared page at pfn feffd
buffered io page at pfn feffb
Guest uuid = 3b2ac74f-2845-17f5-70da-ac85c19d63df
Time offset set -198
populating video RAM at ff000000
mapping video RAM from ff000000
Register xen platform.
Done register platform.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
xs_read(/local/domain/0/device-model/15/xen_extended_power_mgmt): read error
xs_read(): vncpasswd get error. /vm/3b2ac74f-2845-17f5-70da-ac85c19d63df/vncpasswd.
Log-dirty: no command yet.
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
xs_read(/local/domain/15/log-throttling): read error
qemu: ignoring not-understood drive `/local/domain/15/log-throttling'
medium change watch on `/local/domain/15/log-throttling' - unknown device, ignored
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
I/O request not ready: 0, ptr: 0, port: 0, data: 0, count: 0, size: 0
cirrus vga map change while on lfb mode
mapping vram to f0000000 - f0400000
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is rw state.
platform_fixed_ioport: changed ro/rw state of ROM memory area. now is ro state.
Time offset set -199, added offset -1
Time offset set -200, added offset -1
Time offset set -201, added offset -1
Time offset set -202, added offset -1
I/O request not ready: 0, ptr: 0, port: 1f48, data: 4ed0ef16, count: 1, size: 4
I/O request not ready: 0, ptr: 0, port: 1f48, data: 981753e2, count: 1, size: 4
Time offset set -203, added offset -1
Time offset set -204, added offset -1
Time offset set -205, added offset -1
Time offset set -206, added offset -1
Time offset set -207, added offset -1
Time offset set -208, added offset -1
I/O request not ready: 0, ptr: 0, port: c110, data: 8a03c, count: 1, size: 4
I/O request not ready: 0, ptr: 0, port: c110, data: 8a5ea, count: 1, size: 4
xc_map_foreign_batch: mmap failed: Cannot allocate memory
xc_map_foreign_bulk error 12
I'm not sure what flavor of linux it's running as I did not build the
VM. It's running 32bit kernel 2.6.16.60-6-smp.
Any ideas?
Thanks,
James
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home