WARNING - OLD ARCHIVES

This is an archived copy of the Xen.org mailing list, which we have preserved to ensure that existing links to archives are not broken. The live archive, which contains the latest emails, can be found at http://lists.xen.org/
   
 
 
Xen 
 
Home Products Support Community News
 
   
 

xen-users

Re: [Xen-users] Did anyone succeeded in installing xen 4.0.0 on Debian L

On Wed, Sep 08, 2010 at 08:03:46AM +0000, Meister Schieber wrote:
>    From: Pasi Kärkkäinen <pasik@xxxxxx>
>    > What domU kernel are you using? Does it have xen-pcifront?
> 
>    I first used not a own domU kernel (dom0 Kernel: 2.6.32-5-xen-amd64). This
>    did not wirk, the netowrk came up and got down immediately:
>    [  260.736409] e1000: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow
>    Control: RX/TX
>    DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 5
>    [  261.552116] e1000: eth1 NIC Link is Down
>    [  264.768408] e1000: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow
>    Control: RX/TX
>    [  265.580116] e1000: eth1 NIC Link is Down
>    DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 8
>    [  267.200418] e1000: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow
>    Control: RX/TX
>    [  268.012111] e1000: eth1 NIC Link is Down
>    [  269.632409] e1000: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow
>    Control: RX/TX
>    [  270.444115] e1000: eth1 NIC Link is Down
> 
>    I then followd the instructions on [1]http://wiki.debian.org/PyGrub and
>    used the 2.6.18 kernel, but this did not change anything.
>

How much memory does your domU have? If more than 3 GB, try with 2GB or less.


 
>    > What does "lspci" show in the domU?
> 
>    domU:~# lspci
>    00:00.0 Ethernet controller: Intel Corporation 82541PI Gigabit Ethernet
>    Controller (rev 05)
> 
>    > What pci related do you have in the domU dmesg?
>    domU:~# dmesg | grep -i pci
>    [    0.000000] Allocating PCI resources starting at 8000000 (gap:
>    8000000:f8000000)
>    [    0.013875] PCI: setting up Xen PCI frontend stub
>    [    0.185563] pcifront pci-0: Installing PCI frontend
>    [    0.185826] pcifront pci-0: Creating PCI Frontend Bus 0000:00
>    [    0.189811] pci 0000:00:00.0: reg 10 32bit mmio:
>    [0xfeac0000-0xfeadffff]
>    [    0.189811] pci 0000:00:00.0: reg 14 32bit mmio:
>    [0xfeaa0000-0xfeabffff]
>    [    0.189811] pci 0000:00:00.0: reg 18 io port: [0xb400-0xb43f]
>    [    0.189811] pci 0000:00:00.0: reg 30 32bit mmio pref:
>    [0xfea80000-0xfea9ffff]
>    [    0.189811] pcifront pci-0: claiming resource 0000:00:00.0/0
>    [    0.189811] pcifront pci-0: claiming resource 0000:00:00.0/1
>    [    0.189811] pcifront pci-0: claiming resource 0000:00:00.0/2
>    [    0.189811] pcifront pci-0: claiming resource 0000:00:00.0/6
>    [    0.234504] sysfs: cannot create duplicate filename
>    '/devices/pci-0/pci0000:00/0000:00:00.0/config'
>    [    0.236132]  [<ffffffff811a5303>] ?
>    pci_create_sysfs_dev_files+0x46/0x356
>    [    0.236132]  [<ffffffff8119e702>] ? pci_bus_add_device+0x32/0x39
>    [    0.236132]  [<ffffffff8119e733>] ? pci_bus_add_devices+0x2a/0x11e
>    [    0.236132]  [<ffffffff812fbdc1>] ? pcifront_scan_root+0x19f/0x1c4
>    [    0.236132]  [<ffffffff812f8e84>] ?
>    pcifront_backend_changed+0x176/0x4e3
>    [    0.732604] e1000 0000:00:00.0: Xen PCI enabling IRQ: 17
>    [    0.998732] e1000: 0000:00:00.0: e1000_probe: (PCI:33MHz:32-bit)
>    00:0e:0c:b9:9b:4a
> 

What's the mode you're using for xen pci backend driver in dom0 kernel? 

-- Pasi


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users

<Prev in Thread] Current Thread [Next in Thread>