| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
RE: AW: [Xen-devel] Re: [Xen-users] Re: Xen 4.0 - Support for Citrix WHQ
Presumably the tools are creating a /local/domain/3/console/0
entry if you don’t specify VNC; it’s another example of the same issue you saw
before.
The Citrix PV drivers are not routinely tested on xen-unstable; you
need to tweak your tools to give them the environment they expect (which is
that the only thing under /local/domain/XXX/device are vbd and vif nodes).
Paul
From: Giovanni Bellac
[mailto:giovannib1979@xxxxxxxxx]
Sent: 07 September 2010 11:40
To: Ian Campbell
Cc: xen-devel@xxxxxxxxxxxxxxxxxxx; xen-users@xxxxxxxxxxxxxxxxxxx; Paul
Durrant
Subject: AW: AW: [Xen-devel] Re: [Xen-users] Re: Xen 4.0 - Support for
Citrix WHQL-certified Windows PV drivers
Hello Ian
there is no "vfb" in the .sxp
Here is it:
(Node: XEN 4.0.1 + 2.6.32.21 pvops)
I have found out one interesting point, I have described it under the config
file.
name = 'windows'
kernel = '/usr/lib/xen/boot/hvmloader'
builder = 'hvm'
device_model = '/usr/lib64/xen/bin/qemu-dm'
memory = 4096
vcpus=4
acpi=1
apic=1
vif = [ 'bridge=eth0' ]
disk = [ 'phy:/dev/vserv/windows,hda,w',
'file:/root/SW_DVD5_Windows_Svr_DC_EE_SE_Web_2008R2_64-bit_German_X15-59762.ISO,hdc:cdrom,r'
]
boot='c'
usbdevice='tablet'
vnc=1
vncunused=0
vnclisten = '10.10.10.137'
vncdisplay=2
vncconsole=1
vncpasswd=''
vncviewer=0
sdl=0
stdvga=0
serial='pty'
ne2000 = "0"
on_reboot = 'restart'
on_crash = 'restart'
After removing all statements with "vnc" out of the sxp file and
restarting the windows domU, I get in the qemu logs:
XENUTIL: WARNING: CloseFrontend: timed out in XenbusWaitForBackendStateChange:
/local/domain/0/backend/console/3/0 in state INITIALISING; retry.
Now it is not vfb, it is CONSOLE.
Best regards
Gio
Von: Ian Campbell
<Ian.Campbell@xxxxxxxxxx>
An: Giovanni Bellac <giovannib1979@xxxxxxxxx>
CC: Paul Durrant <Paul.Durrant@xxxxxxxxxx>;
"xen-devel@xxxxxxxxxxxxxxxxxxx" <xen-devel@xxxxxxxxxxxxxxxxxxx>;
"xen-users@xxxxxxxxxxxxxxxxxxx" <xen-users@xxxxxxxxxxxxxxxxxxx>
Gesendet: Dienstag, den 7. September 2010, 11:57:13 Uhr
Betreff: Re: AW: [Xen-devel] Re: [Xen-users] Re: Xen 4.0 - Support for
Citrix WHQL-certified Windows PV drivers
On Tue, 2010-09-07 at 08:53 +0100, Giovanni Bellac wrote:
> Hello
>
> > Since these is actually no fe driver for vfb, I suggest you just
> make sure this node does not exist.
>
> sorry, but I do not understand that 100%
> I have one domU with one LVM partition created. There is no other domU
> or LVM partition on this system.
vfb is the virtual frame buffer.
The frontend/backend protocol for VFB is a different to most other
device types and is incompatible with the Windows PV drivers.
You should remove any "vfb" configuration items from your domain
configuration file, I think.
Ian.
|
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
|
|
| |
|
Home