Hi!
I'm trying to get the Debian packages of Xen 4.0.1rc3 and kernel 2.6.32 pvops
running on my Ubuntu Lucid box, with this grub config:
menuentry 'Ubuntu GNU/Linux, with Linux 2.6.32-5-xen-amd64 and XEN 4.0-amd64'
--class ubuntu --class gnu-linux --class gnu --class os --class xen {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set 4c5defc6-bb8f-42c4-9082-38de2ce0b1ba
echo 'Loading Linux 2.6.32-5-xen-amd64 ...'
multiboot /xen-4.0-amd64.gz dom0_mem=1024M sync_console com2=57600,8n1
console=com2
module /vmlinuz-2.6.32-5-xen-amd64 placeholder
root=UUID=79a7dfd5-53c9-402f-8621-4970f8af2a88 ro console=hvc0 nomodeset
earlyprintk=xen
echo 'Loading initial ramdisk ...'
module /initrd.img-2.6.32-5-xen-amd64
}
The old config ( Xen 3.2.1 ) used ttyS1 as console, which worked fine.
This is the output of the boot ( it just hangs after the last line ( instead of
showing the boot prompt?) ):
(XEN) Xen version 4.0.1-rc3 (Debian 4.0.1~rc3-1) (waldi@xxxxxxxxxx) (gcc
version 4.4.4 (Debian 4.4.4-5) ) Wed Jun 30 14:32:51 UTC 2010
(XEN) Console output is synchronous.
(XEN) Command line: sync_console loglvl=all guest_loglvl=all com2=57600
console=com2
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 2 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 1 MBR signatures
(XEN) Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 00000000000a0000 (usable)
(XEN) 0000000000100000 - 00000000cfb50000 (usable)
(XEN) 00000000cfb50000 - 00000000cfb66000 (reserved)
(XEN) 00000000cfb66000 - 00000000cfb85c00 (ACPI data)
(XEN) 00000000cfb85c00 - 00000000d0000000 (reserved)
(XEN) 00000000e0000000 - 00000000f0000000 (reserved)
(XEN) 00000000fe000000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000230000000 (usable)
(XEN) ACPI: RSDP 000F2160, 0024 (r2 DELL )
(XEN) ACPI: XSDT 000F21FC, 0084 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: FACP CFB83524, 00F4 (r3 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: DSDT CFB66000, 4996 (r1 DELL PE_SC3 1 INTL 20050624)
(XEN) ACPI: FACS CFB85C00, 0040
(XEN) ACPI: APIC CFB83078, 009E (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: SPCR CFB83130, 0050 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: HPET CFB83184, 0038 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: MCFG CFB831C0, 003C (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: WD__ CFB83200, 0134 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: SLIC CFB83338, 0176 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: ERST CFB6AB18, 0210 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: HEST CFB6AD28, 027C (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: BERT CFB6A998, 0030 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: EINJ CFB6A9C8, 0150 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: TCPA CFB834BC, 0064 (r2 DELL PE_SC3 1 DELL 1)
(XEN) System RAM: 8186MB (8383424kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-0000000230000000
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000fe710
(XEN) DMI 2.5 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x808
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0]
(XEN) ACPI: wakeup_vec[cfb85c0c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 6:15 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
(XEN) Processor #6 6:15 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
(XEN) Processor #1 6:15 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled)
(XEN) Processor #7 6:15 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] disabled)
(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: IOAPIC (id[0x09] address[0xfec81000] gsi_base[64])
(XEN) IOAPIC[1]: apic_id 9, version 32, address 0xfec81000, GSI 64-87
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 2 I/O APICs
(XEN) ACPI: HPET id: 0x8086a201 base: 0xfed00000
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
(XEN) PCI: MCFG area at e0000000 reserved in E820
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 1995.042 MHz processor.
(XEN) Initing memory sharing.
(XEN) VMX: Supported advanced features:
(XEN) - APIC TPR shadow
(XEN) - MSR direct-access bitmap
(XEN) HVM: ASIDs disabled.
(XEN) HVM: VMX enabled
(XEN) Intel machine check reporting enabled
(XEN) I/O virtualisation disabled
(XEN) Total of 4 processors activated.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) checking TSC synchronization across 4 CPUs: passed.
(XEN) Platform timer is 14.318MHz HPET
�(XEN) Allocated console ring of 32 KiB.
(XEN) microcs
(XEN) HPET: 3 timers in total, 0 timers will be used for broadcast
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x16c1000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000224000000->0000000228000000 (2022129 pages to be
allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff816c1000
(XEN) Init. ramdisk: ffffffff816c1000->ffffffff82f15c00
(XEN) Phys-Mach map: ffffffff82f16000->ffffffff83ea3788
(XEN) Start info: ffffffff83ea4000->ffffffff83ea44b4
(XEN) Page tables: ffffffff83ea5000->ffffffff83ec8000
(XEN) Boot stack: ffffffff83ec8000->ffffffff83ec9000
(XEN) TOTAL: ffffffff80000000->ffffffff84000000
(XEN) ENTRY ADDRESS: ffffffff81501200
(XEN) Dom0 has maximum 4 VCPUs
(XEN) Scrubbing Free RAM: .done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) **********************************************
(XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS
(XEN) ******* This option is intended to aid debugging of Xen by ensuring
(XEN) ******* that all output is synchronously delivered on the serial line.
(XEN) ******* However it can introduce SIGNIFICANT latencies and affect
(XEN) ******* timekeeping. It is NOT recommended for production use!
(XEN) **********************************************
(XEN) 3... 2... 1...
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to
Xen)
(XEN) Freed 176kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-xen-amd64 (Debian 2.6.32-15)
(ben@xxxxxxxxxxxxxxx) (gcc version 4.3.5 (Debian 4.3.5-1) ) #1 SMP Tue Jun 1
06:38:33 UTC 2010
[ 0.000000] Command line: root=UUID=79a7dfd5-53c9-402f-8621-4970f8af2a88 ro
console=hvc0 nomodeset earlyprintk=xen
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] xen_release_chunk: looking at area pfn d0000-e0000: 65536 pages
freed
[ 0.000000] xen_release_chunk: looking at area pfn f0000-fe000: 57344 pages
freed
[ 0.000000] released 122880 pages of unused memory
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved)
[ 0.000000] Xen: 0000000000100000 - 00000000cfb50000 (usable)
[ 0.000000] Xen: 00000000cfb50000 - 00000000cfb66000 (reserved)
[ 0.000000] Xen: 00000000cfb66000 - 00000000cfb85c00 (ACPI data)
[ 0.000000] Xen: 00000000cfb85c00 - 00000000d0000000 (reserved)
[ 0.000000] Xen: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] Xen: 00000000fe000000 - 0000000100000000 (reserved)
[ 0.000000] Xen: 0000000100000000 - 00000001f1af1000 (usable)
[ 0.000000] bootconsole [xenboot0] enabled
[ 0.000000] DMI 2.5 present.
[ 0.000000] last_pfn = 0x1f1af1 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x50100070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xcfb50 max_arch_pfn = 0x400000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cfb50000
[ 0.000000] init_memory_mapping: 0000000100000000-00000001f1af1000
[ 0.000000] RAMDISK: 016c1000 - 02f15c00
[ 0.000000] ACPI: RSDP 00000000000f2160 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000000f21fc 00084 (v01 DELL PE_SC3 00000001
DELL 00000001)
[ 0.000000] ACPI: FACP 00000000cfb83524 000F4 (v03 DELL PE_SC3 00000001
DELL 00000001)
[ 0.000000] ACPI: DSDT 00000000cfb66000 04996 (v01 DELL PE_SC3 00000001
INTL 20050624)
[ 0.000000] ACPI: FACS 00000000cfb85c00 00040
[ 0.000000] ACPI: APIC 00000000cfb83078 0009E (v01 DELL PE_SC3 00000001
DELL 00000001)
[ 0.000000] ACPI: SPCR 00000000cfb83130 00050 (v01 DELL PE_SC3 00000001
DELL 00000001)
[ 0.000000] ACPI: HPET 00000000cfb83184 00038 (v01 DELL PE_SC3 00000001
DELL 00000001)
[ 0.000000] ACPI: MCFG 00000000cfb831c0 0003C (v01 DELL PE_SC3 00000001
DELL 00000001)
[ 0.000000] ACPI: WD__ 00000000cfb83200 00134 (v01 DELL PE_SC3 00000001
DELL 00000001)
[ 0.000000] ACPI: SLIC 00000000cfb83338 00176 (v01 DELL PE_SC3 00000001
DELL 00000001)
[ 0.000000] ACPI: ERST 00000000cfb6ab18 00210 (v01 DELL PE_SC3 00000001
DELL 00000001)
[ 0.000000] ACPI: HEST 00000000cfb6ad28 0027C (v01 DELL PE_SC3 00000001
DELL 00000001)
[ 0.000000] ACPI: BERT 00000000cfb6a998 00030 (v01 DELL PE_SC3 00000001
DELL 00000001)
[ 0.000000] ACPI: EINJ 00000000cfb6a9c8 00150 (v01 DELL PE_SC3 00000001
DELL 00000001)
[ 0.000000] ACPI: TCPA 00000000cfb834bc 00064 (v02 DELL PE_SC3 00000001
DELL 00000001)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000001f1af1000
[ 0.000000] Bootmem setup node 0 0000000000000000-00000001f1af1000
[ 0.000000] NODE_DATA [0000000000008000 - 000000000000ffff]
[ 0.000000] bootmap [0000000000010000 - 000000000004e35f] pages 3f
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 01f1af1000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000
- 0000001000]
[ 0.000000] #1 [0003ea5000 - 0003ec8000] XEN PAGETABLES ==> [0003ea5000
- 0003ec8000]
[ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000
- 0000008000]
[ 0.000000] #3 [0001000000 - 00016a0594] TEXT DATA BSS ==> [0001000000
- 00016a0594]
[ 0.000000] #4 [00016c1000 - 0002f15c00] RAMDISK ==> [00016c1000
- 0002f15c00]
[ 0.000000] #5 [0002f16000 - 0003ea5000] XEN START INFO ==> [0002f16000
- 0003ea5000]
[ 0.000000] #6 [00016a1000 - 00016a12d9] BRK ==> [00016a1000
- 00016a12d9]
[ 0.000000] #7 [0000100000 - 000075d000] PGTABLE ==> [0000100000
- 000075d000]
[ 0.000000] #8 [0003ec8000 - 000465a000] PGTABLE ==> [0003ec8000
- 000465a000]
[ 0.000000] found SMP MP-table at [ffff8800000fe710] fe710
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x001f1af1
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x000cfb50
[ 0.000000] 0: 0x00100000 -> 0x001f1af1
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
�ɕ��ѕɕ͕�ٕ����[ 0.160651] PCI: Using MMCONFIG at e0000000 -
efffffff�ɕ���ѕɕ�muA
[ 0.164001] PCI: Using configuration type 1 for base access
[ 0.164001] PCI: Dell PowerEdge 2950 detected, enabling pci=bfsort.
[ 0.164746] bio: create slab <bio-0> at 0
[ 0.168647] ERROR: Unable to locate IOAPIC for GSI 9
[ 0.175501] ACPI Error (psargs-0359): [CDW1] Namespace lookup failure,
AE_NOT_FOUND
[ 0.176001] ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_._OSC] (Node ffff8801f142e6e0), AE_NOT_FOUND
[ 0.176235] ACPI: BIOS _OSI(Linux) query ignored
[ 0.180491] ACPI: Interpreter enabled
[ 0.184001] ACPI: (supports S0 S4 S5)
[ 0.184001] ACPI: Using IOAPIC for interrupt routing
[ 0.192142] ACPI: No dock devices found.
[ 0.196627] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.200001] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[ 0.200001] pci 0000:00:00.0: PME# disabled
[ 0.200001] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.200001] pci 0000:00:02.0: PME# disabled
[ 0.200001] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.200001] pci 0000:00:03.0: PME# disabled
[ 0.200136] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.204001] pci 0000:00:04.0: PME# disabled
[ 0.204001] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
[ 0.204001] pci 0000:00:05.0: PME# disabled
[ 0.204001] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.204001] pci 0000:00:06.0: PME# disabled
[ 0.204001] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.204001] pci 0000:00:07.0: PME# disabled
[ 0.204388] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.208001] pci 0000:00:1c.0: PME# disabled
[ 0.208001] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.208001] pci 0000:00:1d.7: PME# disabled
[ 0.210334] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 0.212001] pci 0000:06:00.0: PME# disabled
[ 0.212001] pci 0000:06:00.3: PME# supported from D0 D3hot D3cold
[ 0.212001] pci 0000:06:00.3: PME# disabled
[ 0.212001] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You
can enable it with 'pcie_aspm=force'
[ 0.212001] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
[ 0.212001] pci 0000:07:00.0: PME# disabled
[ 0.212001] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You
can enable it with 'pcie_aspm=force'
[ 0.212001] pci 0000:07:01.0: PME# supported from D0 D3hot D3cold
[ 0.212001] pci 0000:07:01.0: PME# disabled
[ 0.212001] pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You
can enable it with 'pcie_aspm=force'
[ 0.212001] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[ 0.212001] pci 0000:08:00.0: PME# disabled
[ 0.212001] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device.
ѕɕ�mu��͍���ձ�Ʌ�ѥ����ѽ��ɕ���ѕɕ�mu��͍���ձ�ɑ�������ɕ���ѕɕ�mu��͍���ձ�ɍ��ɕ���ѕɕ�����ձ��[
2.000578] registerink
[ 2.008960] hpet_acpi_add: no address or irqs in _CRS
[ 2.018891] Linux agpgart interface v0.103
[ 2.022872] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.040002] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.052383] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.063614] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[ 2.079015] PNP: No PS/2 controller found. Probing ports directly.
[ 2.094082] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.100509] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.114153] mice: PS/2 mouse device common for all mice
[ 2.124669] rtc_cmos 00:04: RTC can wake from S4
[ 2.134029] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.146336] rtc0: alarms up to one day, y3k, 242 bytes nvram
[ 2.157751] cpuidle: using governor ladder
[ 2.161723] cpuidle: using governor menu
[ 2.161723] No iBFT detected.
[ 2.161723] TCP cubic registered
[ 2.186841] NET: Registered protocol family 10
[ 2.196290] lo: Disabled Privacy Extensions
[ 2.204774] Mobile IPv6
[ 2.208660] NET: Registered protocol family 17
[ 2.208660] registered taskstats version 1
[ 2.231833] rtc_cmos 00:04: setting system clock to 2010-07-22 14:15:10 UTC
(1279808110)
[ 2.247862] Initalizing network drop monitor service
[ 2.257950] Freeing unused kernel memory: 592k freed
[ 2.261870] Write protecting the kernel read-only data: 4308k
Loading, please wait...
[ 2.325588] udev: starting version 151
Begin: Loading essential drivers... ...
[ 2.353363] md: linear personality registered for level -1
[ 2.387106] md: multipath personality registered for level -4
[ 2.434279] SCSI subsystem initialized
[ 2.443603] megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
[ 2.455173] megasas: 0x1028:0x0015:0x1028:0x1f03: bus 2:slot 14:func 0
[ 2.468322] megaraid_sas 0000:02:0e.0: PCI INT A -> GSI 78 (level, low) ->
IRQ 78
[ 2.483911] usbcore: registered new interface driver usbfs
[ 2.494752] megasas: FW now in Ready state
[ 2.494775] usbcore: registered new interface driver hub
[ 2.503248] usbcore: registered new device driver usb
[ 2.509798] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.511435] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 2.511454] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.511482] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 1
[ 2.511552] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000dce0
[ 2.519362] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.519365] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 2.519367] usb usb1: Product: UHCI Host Controlle[ 6.218176] bnx2: Can't
load firmware file "bnx2/bnx2-mips-06-5.0.0.j3.fw"
[ 6.715448] bnx2: Can't load firmware file "bnx2/bnx2-mips-06-5.0.0.j3.fw"
fsck from util-linux-ng 2.17.2
fsck from util-linux-ng 2.17.2
/dev/sda3: clean, 71193/640848 files, 671783/2558351 blocks
/dev/sda1: Superblock last write time is in the future.
(by less than a day, probably due to the hardware clock being incorrectly
set). FIXED.
/dev/sda1: clean, 206/24096 files, 28673/96356 blocks
init: ureadahead-other main process (559) terminated with status 4
If I'm not mistaken, this must have something to do with the console output not
being available? I've made a hvc0 entry in upstart/inittab, so the device
should be there.. The firmware for the NIC shouldn't cause the boot to fail
either... Does anyone have any ideas that might help me out here? :)
Thanks a lot in advance!
Kind regards,
Bart Verwilst
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
Home