[ 4.167633] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 4.167633] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 4.174682] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus numbe r 8 [ 4.176978] uhci_hcd 0000:00:1d.2: detected 2 ports [ 4.178027] uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000d000 [ 4.179663] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 4.180587] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 4.180587] usb usb8: Product: UHCI Host Controller [ 4.180587] usb usb8: Manufacturer: Linux 2.6.30-rc3-tip uhci_hcd [ 4.180587] usb usb8: SerialNumber: 0000:00:1d.2 [ 4.186112] usb usb8: configuration #1 chosen from 1 choice [ 4.187610] hub 8-0:1.0: USB hub found [ 4.188407] hub 8-0:1.0: 2 ports detected [ 4.189516] usbcore: registered new interface driver usblp [ 4.190502] Initializing USB Mass Storage driver... [ 4.193649] usbcore: registered new interface driver usb-storage [ 4.194636] USB Mass Storage support registered. [ 4.195963] usbcore: registered new interface driver libusual [ 4.197310] PNP: No PS/2 controller found. Probing ports directly. [ 4.202494] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 4.203260] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 4.206193] mice: PS/2 mouse device common for all mice [ 4.208395] rtc_cmos 00:03: RTC can wake from S4 [ 4.210069] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 4.211590] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 4.212842] xen_allocate_pirq: returning irq 18 for gsi 18 [ 4.213798] xen_set_ioapic_routing: irq 18 gsi 18 vector 18 ioapic 0 pin 18 t riggering 1 polarity 1 (XEN) ioapic_guest_write: apic=0, pin=18, irq=18 (XEN) ioapic_guest_write: new_entry=0001a9c8 (XEN) ioapic_guest_write: old_entry=0000a9c8 pirq=18 (XEN) ioapic_guest_write: Attempt to modify IO-APIC pin for in-use IRQ! [ 4.213798] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.218195] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-d evel@xxxxxxxxxx [ 4.221855] cpuidle: using governor ladder [ 4.222839] cpuidle: using governor menu [ 4.226406] usbcore: registered new interface driver hiddev [ 4.227821] usbcore: registered new interface driver usbhid [ 4.228808] usbhid: v2.6:USB HID core driver [ 4.230139] Advanced Linux Sound Architecture Driver Version 1.0.19. [ 4.236664] xen_set_ioapic_routing: irq 22 gsi 22 vector 22 ioapic 0 pin 22 t riggering 1 polarity 1 [ 4.237352] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 2 2 [ 4.348371] input: HDA Intel Line In at Ext Rear Jack as /devices/pci0000:00/ 0000:00:1b.0/input/input3 [ 4.351493] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/000 0:00:1b.0/input/input4 [ 4.354517] input: HDA Intel Mic at Ext Rear Jack as /devices/pci0000:00/0000 :00:1b.0/input/input5 [ 4.358568] input: HDA Intel Line Out at Ext Rear Jack as /devices/pci0000:00 /0000:00:1b.0/input/input6 [ 4.361663] input: HDA Intel Line Out at Ext Rear Jack as /devices/pci0000:00 /0000:00:1b.0/input/input7 [ 4.366012] input: HDA Intel Line Out at Ext Rear Jack as /devices/pci0000:00 /0000:00:1b.0/input/input8 [ 4.369175] input: HDA Intel Line Out at Ext Rear Jack as /devices/pci0000:00 /0000:00:1b.0/input/input9 [ 4.372298] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/ 0000:00:1b.0/input/input10 [ 4.387374] ALSA device list: [ 4.388357] #0: HDA Intel at 0xffa70000 irq 22 [ 4.390040] Netfilter messages via NETLINK v0.30. [ 4.391035] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 4.392672] ctnetlink v0.93: registering with nfnetlink. [ 4.395988] ip_tables: (C) 2000-2006 Netfilter Core Team [ 4.406047] TCP cubic registered [ 4.407016] Initializing XFRM netlink socket [ 4.408701] NET: Registered protocol family 10 [ 4.413230] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 4.420162] IPv6 over IPv4 tunneling driver [ 4.423136] NET: Registered protocol family 17 [ 4.425958] RPC: Registered udp transport module. [ 4.426695] RPC: Registered tcp transport module. [ 4.428580] IO APIC resources couldn't be allocated. [ 4.430309] registered taskstats version 1 [ 4.431226] Magic number: 14:280:108 [ 4.432116] usbmon usbmon4: hash matches [ 4.433660] Freeing unused kernel memory: 528k freed [ 4.434500] Write protecting the kernel read-only data: 7900k [ 4.470072] usb 7-1: new low speed USB device using uhci_hcd and address 2 [ 4.635680] usb 7-1: New USB device found, idVendor=0603, idProduct=00f2 [ 4.636645] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.636645] usb 7-1: Product: USB Keyboard [ 4.636645] usb 7-1: Manufacturer: NOVATEK [ 4.641016] usb 7-1: configuration #1 chosen from 1 choice [ 4.660085] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.1/u sb7/7-1/7-1:1.0/input/input11 [ 4.662615] generic-usb 0003:0603:00F2.0001: input,hidraw0: USB HID v1.10 Key board [NOVATEK USB Keyboard] on usb-0000:00:1d.1-1/input0 [ 4.699756] input: NOVATEK USB Keyboard as /devices/pci0000:00/0000:00:1d.1/u sb7/7-1/7-1:1.1/input/input12 [ 4.702418] generic-usb 0003:0603:00F2.0002: input,hiddev96,hidraw1: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:1d.1-1/input1 [ 4.866595] ehci_hcd: version magic '2.6.31.12 SMP mod_unload ' should be '2. 6.30-rc3-tip SMP mod_unload ' [ 4.870773] ohci_hcd: version magic '2.6.31.12 SMP mod_unload ' should be '2. 6.30-rc3-tip SMP mod_unload ' [ 4.875282] uhci_hcd: version magic '2.6.31.12 SMP mod_unload ' should be '2. 6.30-rc3-tip SMP mod_unload ' [ 4.892417] scsi_mod: version magic '2.6.31.12 SMP mod_unload ' should be '2. 6.30-rc3-tip SMP mod_unload ' [ 4.896594] sd_mod: version magic '2.6.31.12 SMP mod_unload ' should be '2.6. 30-rc3-tip SMP mod_unload ' [ 4.902025] libata: version magic '2.6.31.12 SMP mod_unload ' should be '2.6. 30-rc3-tip SMP mod_unload ' [ 4.907591] pata_acpi: version magic '2.6.31.12 SMP mod_unload ' should be '2 .6.30-rc3-tip SMP mod_unload ' [ 7.413066] ata_piix: version magic '2.6.31.12 SMP mod_unload ' should be '2. 6.30-rc3-tip SMP mod_unload ' [ 9.919044] ata_generic: version magic '2.6.31.12 SMP mod_unload ' should be '2.6.30-rc3-tip SMP mod_unload ' [ 9.924079] ahci: version magic '2.6.31.12 SMP mod_unload ' should be '2.6.30 -rc3-tip SMP mod_unload ' [ 12.430218] scsi_wait_scan: version magic '2.6.31.12 SMP mod_unload ' should be '2.6.30-rc3-tip SMP mod_unload ' [ 12.479117] kjournald starting. Commit interval 5 seconds [ 12.479138] EXT3-fs: mounted filesystem with writeback data mode. losetup: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) loop: can't get info on device /osmin.img: Inappropriate ioctl for device Usage: mount -V : print version mount -h : print this help mount : list mounted filesystems mount -l : idem, including volume labels So far the informational part. Next the mounting. The command is `mount [-t fstype] something somewhere'. Details found in /etc/fstab may be omitted. mount -a [-t|-O] ... : mount all stuff from /etc/fstab mount device : mount device at the known place mount directory : mount known device here mount -t type dev dir : ordinary mount command Note that one does not really mount a device, one mounts a filesystem (of the given type) found on the device. One can also mount an already visible directory tree elsewhere: mount --bind olddir newdir or move a subtree: mount --move olddir newdir One can change the type of mount containing the directory dir: mount --make-shared dir mount --make-slave dir mount --make-private dir mount --make-unbindable dir One can change the type of all the mounts in a mount subtree containing the directory dir: mount --make-rshared dir mount --make-rslave dir mount --make-rprivate dir mount --make-runbindable dir A device can be given by name, say /dev/hda1 or /dev/cdrom, or by label, using -L label or by uuid, using -U uuid . Other options: [-nfFrsvw] [-o options] [-p passwdfd]. For many more details, say man 8 mount . losetup: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) loop: can't open device /squashfs.osmin/osmin: No such file or directory umount: /squashfs.osmin: not mounted losetup: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) loop: can't get info on device /sysroot/LiveOS/squashfs.img: Inappropriate ioctl for device Usage: mount -V : print version mount -h : print this help mount : list mounted filesystems mount -l : idem, including volume labels So far the informational part. Next the mounting. The command is `mount [-t fstype] something somewhere'. Details found in /etc/fstab may be omitted. mount -a [-t|-O] ... : mount all stuff from /etc/fstab mount device : mount device at the known place mount directory : mount known device here mount -t type dev dir : ordinary mount command Note that one does not really mount a device, one mounts a filesystem (of the given type) found on the device. One can also mount an already visible directory tree elsewhere: mount --bind olddir newdir or move a subtree: mount --move olddir newdir One can change the type of mount containing the directory dir: mount --make-shared dir mount --make-slave dir mount --make-private dir mount --make-unbindable dir One can change the type of all the mounts in a mount subtree containing the directory dir: mount --make-rshared dir mount --make-rslave dir mount --make-rprivate dir mount --make-runbindable dir A device can be given by name, say /dev/hda1 or /dev/cdrom, or by label, using -L label or by uuid, using -U uuid . Other options: [-nfFrsvw] [-o options] [-p passwdfd]. For many more details, say man 8 mount . losetup: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) loop: can't open device /squashfs/LiveOS/ext3fs.img: No such file or directory umount: /squashfs: not mounted losetup: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) loop: can't get info on device /overlay: Inappropriate ioctl for device Usage: blockdev -V blockdev --report [devices] blockdev [-v|-q] commands devices Available commands: --getsz get size in 512-byte sectors --setro set read-only --setrw set read-write --getro get read-only --getss get logical block (sector) size --getpbsz get physical block (sector) size --getiomin get minimum I/O size --getioopt get optimal I/O size --getalignoff get alignment offset --getmaxsect get max sectors per request --getbsz get blocksize --setbsz BLOCKSIZE set blocksize --getsize get 32-bit sector count --getsize64 get size in bytes --setra READAHEAD set readahead --getra get readahead --setfra FSREADAHEAD set filesystem readahead --getfra get filesystem readahead --flushbufs flush buffers --rereadpt reread partition table Invalid format on line 1 of table on stdin Command failed No root device found losetup: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) loop: can't get info on device /osmin.img: Inappropriate ioctl for device Usage: mount -V : print version mount -h : print this help mount : list mounted filesystems mount -l : idem, including volume labels So far the informational part. Next the mounting. The command is `mount [-t fstype] something somewhere'. Details found in /etc/fstab may be omitted. mount -a [-t|-O] ... : mount all stuff from /etc/fstab mount device : mount device at the known place mount directory : mount known device here mount -t type dev dir : ordinary mount command Note that one does not really mount a device, one mounts a filesystem (of the given type) found on the device. One can also mount an already visible directory tree elsewhere: mount --bind olddir newdir or move a subtree: mount --move olddir newdir One can change the type of mount containing the directory dir: mount --make-shared dir mount --make-slave dir mount --make-private dir mount --make-unbindable dir One can change the type of all the mounts in a mount subtree containing the directory dir: mount --make-rshared dir mount --make-rslave dir mount --make-rprivate dir mount --make-runbindable dir A device can be given by name, say /dev/hda1 or /dev/cdrom, or by label, using -L label or by uuid, using -U uuid . Other options: [-nfFrsvw] [-o options] [-p passwdfd]. For many more details, say man 8 mount . losetup: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) loop: can't open device /squashfs.osmin/osmin: No such file or directory umount: /squashfs.osmin: not mounted losetup: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) loop: can't get info on device /sysroot/LiveOS/squashfs.img: Inappropriate ioctl for device Usage: mount -V : print version mount -h : print this help mount : list mounted filesystems mount -l : idem, including volume labels So far the informational part. Next the mounting. The command is `mount [-t fstype] something somewhere'. Details found in /etc/fstab may be omitted. mount -a [-t|-O] ... : mount all stuff from /etc/fstab mount device : mount device at the known place mount directory : mount known device here mount -t type dev dir : ordinary mount command Note that one does not really mount a device, one mounts a filesystem (of the given type) found on the device. One can also mount an already visible directory tree elsewhere: mount --bind olddir newdir or move a subtree: mount --move olddir newdir One can change the type of mount containing the directory dir: mount --make-shared dir mount --make-slave dir mount --make-private dir mount --make-unbindable dir One can change the type of all the mounts in a mount subtree containing the directory dir: mount --make-rshared dir mount --make-rslave dir mount --make-rprivate dir mount --make-runbindable dir A device can be given by name, say /dev/hda1 or /dev/cdrom, or by label, using -L label or by uuid, using -U uuid . Other options: [-nfFrsvw] [-o options] [-p passwdfd]. For many more details, say man 8 mount . losetup: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) loop: can't open device /squashfs/LiveOS/ext3fs.img: No such file or directory umount: /squashfs: not mounted losetup: Could not find any loop device. Maybe this kernel does not know about the loop device? (If so, recompile or `modprobe loop'.) loop: can't get info on device /overlay: Inappropriate ioctl for device Usage: blockdev -V blockdev --report [devices] blockdev [-v|-q] commands devices Available commands: --getsz get size in 512-byte sectors --setro set read-only --setrw set read-write --getro get read-only --getss get logical block (sector) size --getpbsz get physical block (sector) size --getiomin get minimum I/O size --getioopt get optimal I/O size --getalignoff get alignment offset --getmaxsect get max sectors per request --getbsz get blocksize --setbsz BLOCKSIZE set blocksize --getsize get 32-bit sector count --getsize64 get size in bytes --setra READAHEAD set readahead --getra get readahead --setfra FSREADAHEAD set filesystem readahead --getfra get filesystem readahead --flushbufs flush buffers --rereadpt reread partition table Invalid format on line 1 of table on stdin Command failed No root device found