I tried 3.4.2 with the same 2 dom0's and it doesnt even boot fully.
One hangs completely and the other goes really really slooow. The
working machine is in production so i cant try 4.0 :(
- chris
On Fri, May 14, 2010 at 5:34 PM, Pasi Kärkkäinen <pasik@xxxxxx> wrote:
> On Fri, May 14, 2010 at 05:26:22PM -0400, chris wrote:
>> My guests are HVM so thats not really possible. Yes the machine with
>> 3.4.2 has a hardware IOMMU.
>>
>
> What if you install Xen 4.0 to the other machine?
> Or Xen 3.4.2 to this machine?
>
> Does it work then?
>
> Trying to figure out if it's hardware/BIOS related,
> or Xen version related.
>
> -- Pasi
>
>> - chris
>>
>> On Fri, May 14, 2010 at 5:25 PM, Sander Eikelenboom
>> <linux@xxxxxxxxxxxxxx> wrote:
>> > Hello chris,
>> >
>> > But does the other machine have an IOMMU on 3.4.2 ?
>> > I passthrough a few USB controllers my self, but the machine doesn't have
>> > a hardware IOMMU,
>> > so it uses the SWIOTLB changed by Konrad to work with Xen and let the DMA
>> > of the USB controllers work.
>> > It's working on xen-4.0.1-testing, xen-next pvops kernel from a few weeks
>> > ago, various domU kernel.
>> > One domU kernel is a 2.6.33 from Konrad's tree, with patched and
>> > backported xhci support from 2.6.34.
>> >
>> > So perhaps you could try with the IOMMU off, see if it makes a difference,
>> > and would point the problem to the IOMMU more specifically.
>> > Oh yes, what pci backend mode have you choosen in your dom0 kernel config ?
>> > You have 3 options, virtual, passthrough or slot.
>> > I allways tend to use passthrough, don't know it it makes a big difference
>> > though, but at least all functions get registered under the same device id
>> > in the guest.
>> >
>> >
>> >
>> > --
>> >
>> > Sander
>> >
>> >
>> >
>> > Friday, May 14, 2010, 9:46:01 PM, you wrote:
>> >
>> >> I added a pci sound card and interestingly that works. I'm digging
>> >> around for another pci-e device to try to identify if its all pci-e or
>> >> only this device. Strange this is that I have a few other machines
>> >> with this same usb controller which is working on 3.4.2.
>> >
>> >> *scratches head*
>> >
>> >> - chris
>> >
>> >> On Fri, May 14, 2010 at 3:21 PM, Pasi Kärkkäinen <pasik@xxxxxx> wrote:
>> >>> On Fri, May 14, 2010 at 03:18:02PM -0400, chris wrote:
>> >>>> It is a multifunction device, a pci-e usb controller, so I assumed all
>> >>>> them had to be passed through. I just changed it to only 02:00.0 and
>> >>>> same thing
>> >>>>
>> >>>> test-box2:~# cat /etc/xen/vm-five.cfg | grep pci
>> >>>> pci = ['02:00.0']
>> >>>> test-box2:~# xm create /etc/xen/vm-five.cfg
>> >>>> Using config file "/etc/xen/vm-five.cfg".
>> >>>> Error: Failed to assign device to IOMMU
>> >>>> (0000:02:00.0@100,msitranslate=1,power_mgmt=0)
>> >>>>
>> >>>
>> >>> Hmm.. weird.
>> >>>
>> >>> Two things to try:
>> >>>
>> >>> 1) Try passthru some other device (which is just a single pci id)
>> >>> 2) Try passthru that pci-e usb controller to Linux PV guest and see if
>> >>> that works
>> >>>
>> >>> -- Pasi
>> >>>
>> >>>>
>> >>>> On Fri, May 14, 2010 at 3:11 PM, Pasi Kärkkäinen <pasik@xxxxxx> wrote:
>> >>>> > On Fri, May 14, 2010 at 03:05:49PM -0400, chris wrote:
>> >>>> >> Pasi,
>> >>>> >>
>> >>>> >> Tried latest stable/2.6.32.x per your advice, no change. Anyone on
>> >>>> >> xen-devel that can help me troubleshoot further? Everything looks
>> >>>> >> right, can't figure out why vt-d is not working but it must be some
>> >>>> >> kind of bug :(
>> >>>> >>
>> >>>> >
>> >>>> > Did you try the suggestion said earlier.. try to just passthru the
>> >>>> > first pci device?
>> >>>> >
>> >>>> > -- Pasi
>> >>>> >
>> >>>> >> test-box2:~# uname -a
>> >>>> >> Linux test-box2 2.6.32.12 #1 SMP Fri May 14 13:40:05 EDT 2010 x86_64
>> >>>> >> GNU/Linux
>> >>>> >>
>> >>>> >> test-box2:~# xm info | grep virt_caps
>> >>>> >> virt_caps : hvm hvm_directio
>> >>>> >>
>> >>>> >> test-box2:~# xm pci-list-assignable-devices
>> >>>> >> 0000:02:00.0
>> >>>> >> 0000:02:00.1
>> >>>> >> 0000:02:00.2
>> >>>> >>
>> >>>> >> test-box2:~# xm create /etc/xen/vm-five.cfg
>> >>>> >> Using config file "/etc/xen/vm-five.cfg".
>> >>>> >> Error: Failed to assign device to IOMMU
>> >>>> >> (0000:02:00.0@100,msitranslate=1,power_mgmt=0)
>> >>>> >>
>> >>>> >> test-box2:~# cat /etc/xen/vm-five.cfg | grep -v '#'
>> >>>> >> kernel = '/usr/lib/xen/boot/hvmloader'
>> >>>> >> builder = 'hvm'
>> >>>> >> memory = '1792'
>> >>>> >> device_model='/usr/lib/xen/bin/qemu-dm'
>> >>>> >> disk = [ 'phy:/dev/storage/vm-five,ioemu:hda,w',
>> >>>> >> 'phy:/dev/sr0,ioemu:hdc:cdrom,r'
>> >>>> >> ]
>> >>>> >> name = 'vm-five'
>> >>>> >> vif = ['type=ioemu, bridge=eth0, mac=00:16:3D:37:A1:42']
>> >>>> >> boot='dc'
>> >>>> >> cpus='0-1'
>> >>>> >> vcpus=2
>> >>>> >> acpi=1
>> >>>> >> ahci=1
>> >>>> >> vnc=1
>> >>>> >> sdl=0
>> >>>> >> timer_mode=1
>> >>>> >> usb=1
>> >>>> >> usbdevice='tablet'
>> >>>> >> localtime=1
>> >>>> >> pci = ['02:00.0','02:00.1','02:00.2']
>> >>>> >>
>> >>>> >> On Thu, May 13, 2010 at 2:28 PM, chris <tknchris@xxxxxxxxx> wrote:
>> >>>> >> > Forwarding to xen-devel. Can't seem to get VT-d working with xen4
>> >>>> >> > from
>> >>>> >> > tarball on xen.org 2.6.31.13 pv_ops dom0. On pasi's advice I tried
>> >>>> >> > switching to stable/2.6.32.x branch for dom0 and that doesnt even
>> >>>> >> > build. Did something change recently thats breaking compilation?
>> >>>> >> >
>> >>>> >> > Attached is xen dmesg with iommu=verbose loglvl=all
>> >>>> >> > guest_loglvl=all,
>> >>>> >> > and dom0 dmesg from 2.6.31.x
>> >>>> >> >
>> >>>> >> > Any ideas on why VT-d is not working on this board? Initialization
>> >>>> >> > looks good, xen reports hvm_directio capability, everything says
>> >>>> >> > VT-d
>> >>>> >> > should work until domain is created.
>> >>>> >> >
>> >>>> >> > Any ideas why stable/2.6.32.x wont build?
>> >>>> >> >
>> >>>> >> > - chris
>> >>>> >> >
>> >>>> >> > On Thu, May 13, 2010 at 2:07 PM, chris <tknchris@xxxxxxxxx> wrote:
>> >>>> >> >> I redid it with oldconfig which I didn't think would help and same
>> >>>> >> >> thing. I guess this tree is broken? Can someone else try and see
>> >>>> >> >> if
>> >>>> >> >> they can build it? Ugh, whata day :)
>> >>>> >> >>
>> >>>> >> >> On Thu, May 13, 2010 at 1:58 PM, Pasi Kärkkäinen <pasik@xxxxxx>
>> >>>> >> >> wrote:
>> >>>> >> >>> On Thu, May 13, 2010 at 01:55:25PM -0400, chris wrote:
>> >>>> >> >>>> I used the default config on the wiki which you created. Steps
>> >>>> >> >>>> I took were:
>> >>>> >> >>>>
>> >>>> >> >>>> # make clean distclean
>> >>>> >> >>>> # wget -O .config
>> >>>> >> >>>> "http://pasik.reaktio.net/xen/pv_ops-dom0-debug/config-2.6.32.10-pvops-dom0-xen-stable-x86_64";
>> >>>> >> >>>
>> >>>> >> >>> You should do "make oldconfig" at this point.
>> >>>> >> >>>
>> >>>> >> >>>> # make -j8 bzImage
>> >>>> >> >>>> (blah blah)
>> >>>> >> >>>> LD vmlinux.o
>> >>>> >> >>>> MODPOST vmlinux.o
>> >>>> >> >>>> WARNING: modpost: Found 7 section mismatch(es).
>> >>>> >> >>>> To see full details build your kernel with:
>> >>>> >> >>>> 'make CONFIG_DEBUG_SECTION_MISMATCH=y'
>> >>>> >> >>>> GEN .version
>> >>>> >> >>>> CHK include/linux/compile.h
>> >>>> >> >>>> UPD include/linux/compile.h
>> >>>> >> >>>> CC init/version.o
>> >>>> >> >>>> LD init/built-in.o
>> >>>> >> >>>> LD .tmp_vmlinux1
>> >>>> >> >>>> drivers/built-in.o: In function `do_hvm_suspend':
>> >>>> >> >>>> /mnt/tmp/linux-2.6-xen/drivers/xen/manage.c:124: undefined
>> >>>> >> >>>> reference
>> >>>> >> >>>> to `xenbus_suspend'
>> >>>> >> >>>> /mnt/tmp/linux-2.6-xen/drivers/xen/manage.c:138: undefined
>> >>>> >> >>>> reference
>> >>>> >> >>>> to `xenbus_resume'
>> >>>> >> >>>> make: *** [.tmp_vmlinux1] Error 1
>> >>>> >> >>>>
>> >>>> >> >>>
>> >>>> >> >>> Hmm.. weird. I wonder if something has changed recently or
>> >>>> >> >>> what's going on in here..
>> >>>> >> >>>
>> >>>> >> >>> -- Pasi
>> >>>> >> >>>
>> >>>> >> >>>>
>> >>>> >> >>>> On Thu, May 13, 2010 at 11:47 AM, Pasi Kärkkäinen
>> >>>> >> >>>> <pasik@xxxxxx> wrote:
>> >>>> >> >>>> > On Thu, May 13, 2010 at 11:33:57AM -0400, chris wrote:
>> >>>> >> >>>> >> Successfully grabbed the sources and failed to build:
>> >>>> >> >>>> >>
>> >>>> >> >>>> >> LD .tmp_vmlinux1
>> >>>> >> >>>> >> drivers/built-in.o: In function `do_hvm_suspend':
>> >>>> >> >>>> >> /mnt/tmp/linux-2.6-xen/drivers/xen/manage.c:124: undefined
>> >>>> >> >>>> >> reference
>> >>>> >> >>>> >> to `xenbus_suspend'
>> >>>> >> >>>> >> /mnt/tmp/linux-2.6-xen/drivers/xen/manage.c:138: undefined
>> >>>> >> >>>> >> reference
>> >>>> >> >>>> >> to `xenbus_resume'
>> >>>> >> >>>> >> make: *** [.tmp_vmlinux1] Error 1
>> >>>> >> >>>> >>
>> >>>> >> >>>> >> :(
>> >>>> >> >>>> >>
>> >>>> >> >>>> >
>> >>>> >> >>>> > Try the example .config files provided on the wiki page.
>> >>>> >> >>>> >
>> >>>> >> >>>> > -- Pasi
>> >>>> >> >>>> >
>> >>>> >> >>>> >> On Thu, May 13, 2010 at 10:14 AM, Pasi Kärkkäinen
>> >>>> >> >>>> >> <pasik@xxxxxx> wrote:
>> >>>> >> >>>> >> > On Thu, May 13, 2010 at 10:12:56AM -0400, chris wrote:
>> >>>> >> >>>> >> >> Pasi,
>> >>>> >> >>>> >> >>
>> >>>> >> >>>> >> >> How do I pull those kernel sources you referenced? I see
>> >>>> >> >>>> >> >> it mentioned
>> >>>> >> >>>> >> >> on http://wiki.xensource.com/xenwiki/XenParavirtOps but
>> >>>> >> >>>> >> >> no details on
>> >>>> >> >>>> >> >> how to retrieve it.
>> >>>> >> >>>> >> >>
>> >>>> >> >>>> >> >
>> >>>> >> >>>> >> > The instructions are there if you read it carefully..
>> >>>> >> >>>> >> > There's the topic of how to switch branches.
>> >>>> >> >>>> >> >
>> >>>> >> >>>> >> > -- Pasi
>> >>>> >> >>>> >> >
>> >>>> >> >>>> >> >> - chris
>> >>>> >> >>>> >> >>
>> >>>> >> >>>> >> >> On Thu, May 13, 2010 at 8:29 AM, Pasi Kärkkäinen
>> >>>> >> >>>> >> >> <pasik@xxxxxx> wrote:
>> >>>> >> >>>> >> >> > On Wed, May 12, 2010 at 08:41:34PM -0400, chris wrote:
>> >>>> >> >>>> >> >> >> When reading the vtdhowto I noticed the ability to set
>> >>>> >> >>>> >> >> >> iommu=verbose.
>> >>>> >> >>>> >> >> >> Here is that output, I don't know if it helps at all
>> >>>> >> >>>> >> >> >> to figure out
>> >>>> >> >>>> >> >> >> what is wrong.
>> >>>> >> >>>> >> >> >>
>> >>>> >> >>>> >> >> >
>> >>>> >> >>>> >> >> > That seems to be OK:
>> >>>> >> >>>> >> >> >
>> >>>> >> >>>> >> >> > (XEN) I/O virtualisation enabled
>> >>>> >> >>>> >> >> > (XEN) I/O virtualisation for PV guests disabled
>> >>>> >> >>>> >> >> >
>> >>>> >> >>>> >> >> > So hmm.. I wonder if it's related to MSI stuff?
>> >>>> >> >>>> >> >> > You could try xen.git xen/stable-2.6.32.x branch
>> >>>> >> >>>> >> >> > instead and see if that makes a difference..
>> >>>> >> >>>> >> >> >
>> >>>> >> >>>> >> >> > -- Pasi
>> >>>> >> >>>> >> >> >
>> >>>> >> >>>> >> >> >>
>> >>>> >> >>>> >> >> >> ---------- Forwarded message ----------
>> >>>> >> >>>> >> >> >> From: chris <tknchris@xxxxxxxxx>
>> >>>> >> >>>> >> >> >> Date: Wed, May 12, 2010 at 5:28 PM
>> >>>> >> >>>> >> >> >> Subject: Xen4 / Intel DX58SO Mobo / VT-d not working
>> >>>> >> >>>> >> >> >> To: Xen-Users List <xen-users@xxxxxxxxxxxxxxxxxxx>
>> >>>> >> >>>> >> >> >>
>> >>>> >> >>>> >> >> >>
>> >>>> >> >>>> >> >> >> Hello,
>> >>>> >> >>>> >> >> >>
>> >>>> >> >>>> >> >> >> I've previously been successful with Xen4 and VT-d on
>> >>>> >> >>>> >> >> >> other systems. I
>> >>>> >> >>>> >> >> >> am having trouble getting VT-d passthrough working to
>> >>>> >> >>>> >> >> >> a WinXP domain
>> >>>> >> >>>> >> >> >> with DX58SO (Q45) motherboard and i7 930 CPU. VT-d is
>> >>>> >> >>>> >> >> >> enabled in bios,
>> >>>> >> >>>> >> >> >> xm info shows hvm_directio capability, I have iommu=1
>> >>>> >> >>>> >> >> >> set, I have the
>> >>>> >> >>>> >> >> >> devices bound to pciback on dom0 cmdline, xm
>> >>>> >> >>>> >> >> >> pci-list-assignable-devices shows the devices as
>> >>>> >> >>>> >> >> >> assignable. When I
>> >>>> >> >>>> >> >> >> attempt to start the VM I get the error:
>> >>>> >> >>>> >> >> >>
>> >>>> >> >>>> >> >> >> Error: Failed to assign device to IOMMU
>> >>>> >> >>>> >> >> >> (0000:02:00.0@100,msitranslate=1,power_mgmt=0)
>> >>>> >> >>>> >> >> >>
>> >>>> >> >>>> >> >> >> Below is all the information I can think of that would
>> >>>> >> >>>> >> >> >> be useful to
>> >>>> >> >>>> >> >> >> help debug it:
>> >>>> >> >>>> >> >> >>
>> >>>> >> >>>> >> >> >> BIOS VT-d Enabled:
>> >>>> >> >>>> >> >> >> http://i43.tinypic.com/nl3a5e.jpg
>> >>>> >> >>>> >> >> >> http://i42.tinypic.com/nqvlu1.jpg
>> >>>> >> >>>> >> >> >>
>> >>>> >> >>>> >> >> >> grub entry:
>> >>>> >> >>>> >> >> >>
>> >>>> >> >>>> >> >> >> title Xen 4.0.0 / Debian GNU/Linux, kernel
>> >>>> >> >>>> >> >> >> 2.6.31.13
>> >>>> >> >>>> >> >> >> root (hd0,0)
>> >>>> >> >>>> >> >> >> kernel /boot/xen-4.0.0.gz iommu=1
>> >>>> >> >>>> >> >> >> dom0_mem=256M
>> >>>> >> >>>> >> >> >> dom0_max_vcpus=1 dom0_vcpus_pin=true
>> >>>> >> >>>> >> >> >> module /boot/vmlinuz-2.6.31.13 root=/dev/md0
>> >>>> >> >>>> >> >> >> ro console=tty0
>> >>>> >> >>>> >> >> >> xen-pciback.permissive
>> >>>> >> >>>> >> >> >> xen-pciback.hide=(02:00.0)(02:00.1)(02:00.2)(04:00.0)(04:00.1)(04:00.2)(07:00.0)(07:00.1)(07:00.2)(09:00.0)(09:00.1)(09:00.2)
>> >>>> >> >>>> >> >> >> module /boot/initrd.img-2.6.31.13
>> >>>> >> >>>> >> >> >>
>> >>>> >> >>>> >> >> >> # xm pci-list-assignable-devices
>> >>>> >> >>>> >> >> >> 0000:09:00.0
>> >>>> >> >>>> >> >> >> 0000:09:00.1
>> >>>> >> >>>> >> >> >> 0000:09:00.2
>> >>>> >> >>>> >> >> >> 0000:07:00.0
>> >>>> >> >>>> >> >> >> 0000:07:00.1
>> >>>> >> >>>> >> >> >> 0000:07:00.2
>> >>>> >> >>>> >> >> >> 0000:04:00.0
>> >>>> >> >>>> >> >> >> 0000:04:00.1
>> >>>> >> >>>> >> >> >> 0000:04:00.2
>> >>>> >> >>>> >> >> >> 0000:02:00.0
>> >>>> >> >>>> >> >> >> 0000:02:00.1
>> >>>> >> >>>> >> >> >> 0000:02:00.2
>> >>>> >> >>>> >> >> >>
>> >>>> >> >>>> >> >> >> # xm info
>> >>>> >> >>>> >> >> >> host : test-box2
>> >>>> >> >>>> >> >> >> release : 2.6.31.13
>> >>>> >> >>>> >> >> >> version : #2 SMP Wed May 12 14:11:37
>> >>>> >> >>>> >> >> >> EDT 2010
>> >>>> >> >>>> >> >> >> machine : x86_64
>> >>>> >> >>>> >> >> >> nr_cpus : 8
>> >>>> >> >>>> >> >> >> nr_nodes : 1
>> >>>> >> >>>> >> >> >> cores_per_socket : 4
>> >>>> >> >>>> >> >> >> threads_per_core : 2
>> >>>> >> >>>> >> >> >> cpu_mhz : 2800
>> >>>> >> >>>> >> >> >> hw_caps :
>> >>>> >> >>>> >> >> >> bfebfbff:28100800:00000000:00001b40:0098e3bd:00000000:00000001:00000000
>> >>>> >> >>>> >> >> >> virt_caps : hvm hvm_directio
>> >>>> >> >>>> >> >> >> total_memory : 7950
>> >>>> >> >>>> >> >> >> free_memory : 7812
>> >>>> >> >>>> >> >> >> node_to_cpu : node0:0-7
>> >>>> >> >>>> >> >> >> node_to_memory : node0:7812
>> >>>> >> >>>> >> >> >> node_to_dma32_mem : node0:3249
>> >>>> >> >>>> >> >> >> max_node_id : 0
>> >>>> >> >>>> >> >> >> xen_major : 4
>> >>>> >> >>>> >> >> >> xen_minor : 0
>> >>>> >> >>>> >> >> >> xen_extra : .0
>> >>>> >> >>>> >> >> >> xen_caps : xen-3.0-x86_64
>> >>>> >> >>>> >> >> >> xen-3.0-x86_32p hvm-3.0-x86_32
>> >>>> >> >>>> >> >> >> hvm-3.0-x86_32p hvm-3.0-x86_64
>> >>>> >> >>>> >> >> >> xen_scheduler : credit
>> >>>> >> >>>> >> >> >> xen_pagesize : 4096
>> >>>> >> >>>> >> >> >> platform_params : virt_start=0xffff800000000000
>> >>>> >> >>>> >> >> >> xen_changeset : unavailable
>> >>>> >> >>>> >> >> >> xen_commandline : iommu=1 dom0_mem=256M
>> >>>> >> >>>> >> >> >> dom0_max_vcpus=1
>> >>>> >> >>>> >> >> >> dom0_vcpus_pin=true
>> >>>> >> >>>> >> >> >> cc_compiler : gcc version 4.3.2 (Debian
>> >>>> >> >>>> >> >> >> 4.3.2-1.1)
>> >>>> >> >>>> >> >> >> cc_compile_by : root
>> >>>> >> >>>> >> >> >> cc_compile_domain :
>> >>>> >> >>>> >> >> >> cc_compile_date : Thu May 6 13:41:25 EDT 2010
>> >>>> >> >>>> >> >> >> xend_config_format : 4
>> >>>> >> >>>> >> >> >>
>> >>>> >> >>>> >> >> >> # xm create vm-five.cfg
>> >>>> >> >>>> >> >> >> Using config file "./vm-five.cfg".
>> >>>> >> >>>> >> >> >> Error: Failed to assign device to IOMMU
>> >>>> >> >>>> >> >> >> (0000:02:00.0@100,msitranslate=1,power_mgmt=0)
>> >>>> >> >>>> >> >> >>
>> >>>> >> >>>> >> >> >> I feel like I'm missing something really obvious but
>> >>>> >> >>>> >> >> >> I've been at it
>> >>>> >> >>>> >> >> >> for a while now and have run out of brain power.
>> >>>> >> >>>> >> >> >> Anyone have any idea
>> >>>> >> >>>> >> >> >> what might be wrong?
>> >>>> >> >>>> >> >> >>
>> >>>> >> >>>> >> >> >> - chris
>> >>>> >> >>>> >> >> >
>> >>>> >> >>>> >> >> >> __ __ _ _ ___ ___
>> >>>> >> >>>> >> >> >> \ \/ /___ _ __ | || | / _ \ / _ \
>> >>>> >> >>>> >> >> >> \ // _ \ \047_ \ | || |_| | | | | | |
>> >>>> >> >>>> >> >> >> / \ __/ | | | |__ _| |_| | |_| |
>> >>>> >> >>>> >> >> >> /_/\_\___|_| |_| |_|(_)___(_)___/
>> >>>> >> >>>> >> >> >>
>> >>>> >> >>>> >> >> >> (XEN) Xen version 4.0.0 (root@) (gcc version 4.3.2
>> >>>> >> >>>> >> >> >> (Debian 4.3.2-1.1) ) Thu May 6 13:41:25 EDT 2010
>> >>>> >> >>>> >> >> >> (XEN) Latest ChangeSet: unavailable
>> >>>> >> >>>> >> >> >> (XEN) Command line: iommu=verbose dom0_mem=256M
>> >>>> >> >>>> >> >> >> dom0_max_vcpus=1 dom0_vcpus_pin=true
>> >>>> >> >>>> >> >> >> (XEN) Video information:
>> >>>> >> >>>> >> >> >> (XEN) VGA is text mode 80x25, font 8x16
>> >>>> >> >>>> >> >> >> (XEN) VBE/DDC methods: none; EDID transfer time: 0
>> >>>> >> >>>> >> >> >> seconds
>> >>>> >> >>>> >> >> >> (XEN) EDID info not retrieved because no DDC
>> >>>> >> >>>> >> >> >> retrieval method detected
>> >>>> >> >>>> >> >> >> (XEN) Disc information:
>> >>>> >> >>>> >> >> >> (XEN) Found 2 MBR signatures
>> >>>> >> >>>> >> >> >> (XEN) Found 2 EDD information structures
>> >>>> >> >>>> >> >> >> (XEN) Xen-e820 RAM map:
>> >>>> >> >>>> >> >> >> (XEN) 0000000000000000 - 000000000008f000 (usable)
>> >>>> >> >>>> >> >> >> (XEN) 000000000008f000 - 0000000000090000 (reserved)
>> >>>> >> >>>> >> >> >> (XEN) 0000000000090000 - 000000000009ec00 (usable)
>> >>>> >> >>>> >> >> >> (XEN) 000000000009ec00 - 00000000000a0000 (reserved)
>> >>>> >> >>>> >> >> >> (XEN) 00000000000e0000 - 0000000000100000 (reserved)
>> >>>> >> >>>> >> >> >> (XEN) 0000000000100000 - 00000000cf4bd000 (usable)
>> >>>> >> >>>> >> >> >> (XEN) 00000000cf4bd000 - 00000000cf4bf000 (reserved)
>> >>>> >> >>>> >> >> >> (XEN) 00000000cf4bf000 - 00000000cf4c2000 (usable)
>> >>>> >> >>>> >> >> >> (XEN) 00000000cf4c2000 - 00000000cf7bf000 (ACPI NVS)
>> >>>> >> >>>> >> >> >> (XEN) 00000000cf7bf000 - 00000000cf7df000 (usable)
>> >>>> >> >>>> >> >> >> (XEN) 00000000cf7df000 - 00000000cf7ff000 (ACPI data)
>> >>>> >> >>>> >> >> >> (XEN) 00000000cf7ff000 - 00000000cf800000 (usable)
>> >>>> >> >>>> >> >> >> (XEN) 00000000cf800000 - 00000000d0000000 (reserved)
>> >>>> >> >>>> >> >> >> (XEN) 00000000f8000000 - 00000000fd000000 (reserved)
>> >>>> >> >>>> >> >> >> (XEN) 00000000ffe00000 - 0000000100000000 (reserved)
>> >>>> >> >>>> >> >> >> (XEN) 0000000100000000 - 0000000230000000 (usable)
>> >>>> >> >>>> >> >> >> (XEN) ACPI: RSDP 000FE020, 0024 (r2 INTEL )
>> >>>> >> >>>> >> >> >> (XEN) ACPI: XSDT CF7FE120, 0074 (r1 INTEL DX58SO
>> >>>> >> >>>> >> >> >> 11F6 1000013)
>> >>>> >> >>>> >> >> >> (XEN) ACPI: FACP CF7FD000, 00F4 (r3 INTEL DX58SO
>> >>>> >> >>>> >> >> >> 11F6 MSFT 100000D)
>> >>>> >> >>>> >> >> >> (XEN) ACPI Warning (tbfadt-0444): Optional field
>> >>>> >> >>>> >> >> >> "Pm2ControlBlock" has zero address or length:
>> >>>> >> >>>> >> >> >> 0000000000000450/0 [20070126]
>> >>>> >> >>>> >> >> >> (XEN) ACPI: DSDT CF7F8000, 4641 (r2 INTEL DX58SO
>> >>>> >> >>>> >> >> >> 11F6 MSFT 100000D)
>> >>>> >> >>>> >> >> >> (XEN) ACPI: FACS CF728000, 0040
>> >>>> >> >>>> >> >> >> (XEN) ACPI: APIC CF7F7000, 0138 (r2 INTEL DX58SO
>> >>>> >> >>>> >> >> >> 11F6 MSFT 100000D)
>> >>>> >> >>>> >> >> >> (XEN) ACPI: WDDT CF7F6000, 0040 (r1 INTEL DX58SO
>> >>>> >> >>>> >> >> >> 11F6 MSFT 100000D)
>> >>>> >> >>>> >> >> >> (XEN) ACPI: MCFG CF7F5000, 003C (r1 INTEL DX58SO
>> >>>> >> >>>> >> >> >> 11F6 MSFT 100000D)
>> >>>> >> >>>> >> >> >> (XEN) ACPI: ASF! CF7F4000, 00AC (r32 INTEL DX58SO
>> >>>> >> >>>> >> >> >> 11F6 MSFT 100000D)
>> >>>> >> >>>> >> >> >> (XEN) ACPI: HPET CF7F3000, 0038 (r1 INTEL DX58SO
>> >>>> >> >>>> >> >> >> 11F6 MSFT 100000D)
>> >>>> >> >>>> >> >> >> (XEN) ACPI: SSDT CF7E2000, E134 (r1 INTEL SSDT PM
>> >>>> >> >>>> >> >> >> 11F6 MSFT 100000D)
>> >>>> >> >>>> >> >> >> (XEN) ACPI: DMAR CF7DF000, 0140 (r1 INTEL DX58SO
>> >>>> >> >>>> >> >> >> 11F6 MSFT 100000D)
>> >>>> >> >>>> >> >> >> (XEN) ACPI: WDTT CF7F1000, 020C (r2 INTEL DX58SO
>> >>>> >> >>>> >> >> >> 11F6 MSFT 100000D)
>> >>>> >> >>>> >> >> >> (XEN) ACPI: ASPT CF7F2000, 0034 (r4 INTEL PerfTune
>> >>>> >> >>>> >> >> >> 11F6 MSFT 100000D)
>> >>>> >> >>>> >> >> >> (XEN) System RAM: 7950MB (8140820kB)
>> >>>> >> >>>> >> >> >> (XEN) Domain heap initialised
>> >>>> >> >>>> >> >> >> (XEN) Processor #0 7:10 APIC version 21
>> >>>> >> >>>> >> >> >> (XEN) Processor #2 7:10 APIC version 21
>> >>>> >> >>>> >> >> >> (XEN) Processor #4 7:10 APIC version 21
>> >>>> >> >>>> >> >> >> (XEN) Processor #6 7:10 APIC version 21
>> >>>> >> >>>> >> >> >> (XEN) Processor #1 7:10 APIC version 21
>> >>>> >> >>>> >> >> >> (XEN) Processor #3 7:10 APIC version 21
>> >>>> >> >>>> >> >> >> (XEN) Processor #5 7:10 APIC version 21
>> >>>> >> >>>> >> >> >> (XEN) Processor #7 7:10 APIC version 21
>> >>>> >> >>>> >> >> >> (XEN) IOAPIC[0]: apic_id 8, version 32, address
>> >>>> >> >>>> >> >> >> 0xfec00000, GSI 0-23
>> >>>> >> >>>> >> >> >> (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:679: Host address width 39
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:694: found ACPI_DMAR_DRHD:
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:398: dmaru->address = fe711000
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1b.0
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:694: found ACPI_DMAR_DRHD:
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:398: dmaru->address = fe710000
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:340: IOAPIC: f0:1f.7
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:411: flags: INCLUDE_ALL
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR:
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.0
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:571: RMRR region: base_addr e9000
>> >>>> >> >>>> >> >> >> end_address e9fff
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR:
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.1
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:571: RMRR region: base_addr ea000
>> >>>> >> >>>> >> >> >> end_address eafff
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR:
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.2
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:571: RMRR region: base_addr eb000
>> >>>> >> >>>> >> >> >> end_address ebfff
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR:
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.0
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:571: RMRR region: base_addr e6000
>> >>>> >> >>>> >> >> >> end_address e6fff
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR:
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.1
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:571: RMRR region: base_addr e7000
>> >>>> >> >>>> >> >> >> end_address e7fff
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR:
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1a.2
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:571: RMRR region: base_addr e8000
>> >>>> >> >>>> >> >> >> end_address e8fff
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:699: found ACPI_DMAR_RMRR:
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:334: endpoint: 0:1d.0
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]dmar.c:571: RMRR region: base_addr ec000
>> >>>> >> >>>> >> >> >> end_address eefff
>> >>>> >> >>>> >> >> >> (XEN) Using scheduler: SMP Credit Scheduler (credit)
>> >>>> >> >>>> >> >> >> (XEN) Detected 2800.125 MHz processor.
>> >>>> >> >>>> >> >> >> (XEN) Initing memory sharing.
>> >>>> >> >>>> >> >> >> (XEN) VMX: Supported advanced features:
>> >>>> >> >>>> >> >> >> (XEN) - APIC MMIO access virtualisation
>> >>>> >> >>>> >> >> >> (XEN) - APIC TPR shadow
>> >>>> >> >>>> >> >> >> (XEN) - Extended Page Tables (EPT)
>> >>>> >> >>>> >> >> >> (XEN) - Virtual-Processor Identifiers (VPID)
>> >>>> >> >>>> >> >> >> (XEN) - Virtual NMI
>> >>>> >> >>>> >> >> >> (XEN) - MSR direct-access bitmap
>> >>>> >> >>>> >> >> >> (XEN) HVM: ASIDs enabled.
>> >>>> >> >>>> >> >> >> (XEN) HVM: VMX enabled
>> >>>> >> >>>> >> >> >> (XEN) HVM: Hardware Assisted Paging detected.
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1078: drhd->address = fe711000
>> >>>> >> >>>> >> >> >> iommu->reg = ffff82c3fff57000
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1080: cap = c9008010e60262 ecap =
>> >>>> >> >>>> >> >> >> f0207a
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1078: drhd->address = fe710000
>> >>>> >> >>>> >> >> >> iommu->reg = ffff82c3fff56000
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1080: cap = c90780106f0462 ecap =
>> >>>> >> >>>> >> >> >> f020fa
>> >>>> >> >>>> >> >> >> (XEN) Intel VT-d Snoop Control not supported.
>> >>>> >> >>>> >> >> >> (XEN) Intel VT-d DMA Passthrough not supported.
>> >>>> >> >>>> >> >> >> (XEN) Intel VT-d Queued Invalidation supported.
>> >>>> >> >>>> >> >> >> (XEN) Intel VT-d Interrupt Remapping supported.
>> >>>> >> >>>> >> >> >> (XEN) I/O virtualisation enabled
>> >>>> >> >>>> >> >> >> (XEN) I/O virtualisation for PV guests disabled
>> >>>> >> >>>> >> >> >> (XEN) Total of 8 processors activated.
>> >>>> >> >>>> >> >> >> (XEN) ENABLING IO-APIC IRQs
>> >>>> >> >>>> >> >> >> (XEN) -> Using new ACK method
>> >>>> >> >>>> >> >> >> (XEN) TSC is reliable, synchronization unnecessary
>> >>>> >> >>>> >> >> >> (XEN) Platform timer is 14.318MHz HPET
>> >>>> >> >>>> >> >> >> (XEN) Allocated console ring of 16 KiB.
>> >>>> >> >>>> >> >> >> (XEN) Brought up 8 CPUs
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:0.0
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:10.0
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:10.1
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:14.0
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:14.1
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:14.2
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:14.3
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:19.0
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1a.0
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1a.1
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1a.2
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1a.7
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 0:1b.0
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1d.0
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1d.1
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1d.2
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1d.7
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.0
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.2
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.3
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 0:1f.5
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 2:0.0
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 2:0.1
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 2:0.2
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 4:0.0
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 4:0.1
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 4:0.2
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = 5:0.0
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 7:0.0
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 7:0.1
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 7:0.2
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 9:0.0
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 9:0.1
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 9:0.2
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1325: d0:PCIe: map bdf = a:0.0
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = b:3.0
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = b:3.1
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = b:3.2
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = b:3.3
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = b:3.4
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = b:3.5
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = b:3.6
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = b:3.7
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:0.0
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:0.1
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:2.0
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:2.1
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:3.0
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:3.1
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:3.4
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:4.0
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:4.1
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:4.2
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:4.3
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:5.0
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:5.1
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:5.2
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:5.3
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:6.0
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:6.1
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:6.2
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:1332: d0:PCI: map bdf = 3f:6.3
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:695: iommu_enable_translation:
>> >>>> >> >>>> >> >> >> iommu->reg = ffff82c3fff57000
>> >>>> >> >>>> >> >> >> (XEN) [VT-D]iommu.c:695: iommu_enable_translation:
>> >>>> >> >>>> >> >> >> iommu->reg = ffff82c3fff56000
>> >>>> >> >>>> >> >> >> (XEN) *** LOADING DOMAIN 0 ***
>> >>>> >> >>>> >> >> >> (XEN) Xen kernel: 64-bit, lsb, compat32
>> >>>> >> >>>> >> >> >> (XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000
>> >>>> >> >>>> >> >> >> -> 0x26ae000
>> >>>> >> >>>> >> >> >> (XEN) PHYSICAL MEMORY ARRANGEMENT:
>> >>>> >> >>>> >> >> >> (XEN) Dom0 alloc.:
>> >>>> >> >>>> >> >> >> 0000000210000000->0000000220000000
>> >>>> >> >>>> >> >> >> (XEN) VIRTUAL MEMORY ARRANGEMENT:
>> >>>> >> >>>> >> >> >> (XEN) Loaded kernel:
>> >>>> >> >>>> >> >> >> ffffffff81000000->ffffffff826ae000
>> >>>> >> >>>> >> >> >> (XEN) Init. ramdisk:
>> >>>> >> >>>> >> >> >> ffffffff826ae000->ffffffff8f4de600
>> >>>> >> >>>> >> >> >> (XEN) Phys-Mach map:
>> >>>> >> >>>> >> >> >> ffffffff8f4df000->ffffffff8f55f000
>> >>>> >> >>>> >> >> >> (XEN) Start info:
>> >>>> >> >>>> >> >> >> ffffffff8f55f000->ffffffff8f55f4b4
>> >>>> >> >>>> >> >> >> (XEN) Page tables:
>> >>>> >> >>>> >> >> >> ffffffff8f560000->ffffffff8f5df000
>> >>>> >> >>>> >> >> >> (XEN) Boot stack:
>> >>>> >> >>>> >> >> >> ffffffff8f5df000->ffffffff8f5e0000
>> >>>> >> >>>> >> >> >> (XEN) TOTAL:
>> >>>> >> >>>> >> >> >> ffffffff80000000->ffffffff8f800000
>> >>>> >> >>>> >> >> >> (XEN) ENTRY ADDRESS: ffffffff81a10860
>> >>>> >> >>>> >> >> >> (XEN) Dom0 has maximum 1 VCPUs
>> >>>> >> >>>> >> >> >> (XEN) Scrubbing Free RAM:
>> >>>> >> >>>> >> >> >> ..............................................................................done.
>> >>>> >> >>>> >> >> >> (XEN) Xen trace buffers: disabled
>> >>>> >> >>>> >> >> >> (XEN) Std. Loglevel: Errors and warnings
>> >>>> >> >>>> >> >> >> (XEN) Guest Loglevel: Nothing (Rate-limited: Errors
>> >>>> >> >>>> >> >> >> and warnings)
>> >>>> >> >>>> >> >> >> (XEN) Xen is relinquishing VGA console.
>> >>>> >> >>>> >> >> >> (XEN) *** Serial input -> DOM0 (type \047CTRL-a\047
>> >>>> >> >>>> >> >> >> three times to switch input to Xen)
>> >>>> >> >>>> >> >> >> (XEN) Freed 164kB init memory.
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=0, irq=0
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=000109f0
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=00010000 pirq=0
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC
>> >>>> >> >>>> >> >> >> pin for in-use IRQ!
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=2, irq=0
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=000109f0
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=000009f0 pirq=0
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC
>> >>>> >> >>>> >> >> >> pin for in-use IRQ!
>> >>>> >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 3 already mapped
>> >>>> >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 4 already mapped
>> >>>> >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 5 already mapped
>> >>>> >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 6 already mapped
>> >>>> >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 7 already mapped
>> >>>> >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 8 already mapped
>> >>>> >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 9 already mapped
>> >>>> >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 10 already mapped
>> >>>> >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 11 already mapped
>> >>>> >> >>>> >> >> >> (XEN) irq.c:1445: dom0: pirq 0 or irq 12 already mapped
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=0, irq=0
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=000009f0
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=00010000 pirq=0
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC
>> >>>> >> >>>> >> >> >> pin for in-use IRQ!
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=18, irq=18
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9c0
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9c0 pirq=18
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC
>> >>>> >> >>>> >> >> >> pin for in-use IRQ!
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=19, irq=19
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9c8
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9c8 pirq=19
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC
>> >>>> >> >>>> >> >> >> pin for in-use IRQ!
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=23, irq=23
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a929
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a929 pirq=23
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC
>> >>>> >> >>>> >> >> >> pin for in-use IRQ!
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=19, irq=19
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9c8
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9c8 pirq=19
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC
>> >>>> >> >>>> >> >> >> pin for in-use IRQ!
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=18, irq=18
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9c0
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9c0 pirq=18
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC
>> >>>> >> >>>> >> >> >> pin for in-use IRQ!
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=16, irq=16
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9b0
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9b0 pirq=16
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC
>> >>>> >> >>>> >> >> >> pin for in-use IRQ!
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=16, irq=16
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9b0
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9b0 pirq=16
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC
>> >>>> >> >>>> >> >> >> pin for in-use IRQ!
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=19, irq=19
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9c8
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9c8 pirq=19
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC
>> >>>> >> >>>> >> >> >> pin for in-use IRQ!
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: apic=0, pin=18, irq=18
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: new_entry=0001a9c0
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: old_entry=0000a9c0 pirq=18
>> >>>> >> >>>> >> >> >> (XEN) ioapic_guest_write: Attempt to modify IO-APIC
>> >>>> >> >>>> >> >> >> pin for in-use IRQ!
>> >>>> >> >>>> >> >> >
>> >>>> >> >>>> >> >> >> _______________________________________________
>> >>>> >> >>>> >> >> >> Xen-users mailing list
>> >>>> >> >>>> >> >> >> Xen-users@xxxxxxxxxxxxxxxxxxx
>> >>>> >> >>>> >> >> >> http://lists.xensource.com/xen-users
>> >>>> >> >>>> >> >> >
>> >>>> >> >>>> >> >
>> >>>> >> >>>> >
>> >>>> >> >>>
>> >>>> >> >>
>> >>>> >> >
>> >>>> >
>> >>>
>> >
>> >
>> >
>> >
>> >
>> > --
>> > Best regards,
>> > Sander mailto:linux@xxxxxxxxxxxxxx
>> >
>> >
>
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel
|
Home
