Re: [Xen-users] no bridge is shown by ifconfig on Xen Debian

[Tapas Mishra <mightydreams@xxxxxxxxx>]

xenserver:~# brctl show
bridge name     bridge id               STP enabled     interfaces
eth2            8000.0026b9824238       no              peth2
                                                        vif1.0
                                                        vif2.0
                                                        vif3.0
                                                        vif4.0


It is showing eth2 that is what is my problem is I am running xen 3.2
and if I refer to that doc it should be xen-br0 since they are
mentioning that bridge name will be same as the interface name if it
is xen 3.3 or above.

On Sun, Apr 11, 2010 at 12:08 AM, Grant McWilliams
<grantmasterflash@xxxxxxxxx> wrote:
>
> On Sat, Apr 10, 2010 at 10:06 AM, Tapas Mishra <mightydreams@xxxxxxxxx>
> wrote:
>>
>> You are right but the problem is
>> this wiki page
>> http://wiki.xensource.com/xenwiki/XenNetworking
>> see just Ctrl+F following
>> "default bridge name in xen 3.2"
>>
>> in the blue heading network-bridge
>> point number 6 says
>>
>> "peth0 and vif0.0 are attached to bridge xenbr0. Please notice that in
>> xen 3.3, the default bridge name is the same than the interface it is
>> attached to. Eg: bridge name eth0, eth1 or ethX.VlanID "
>>
>>
>> note above they are saying in xen 3.3 default bridge name is same as
>> ethernet the interface is attached to I am using xen 3.2
>> so it should be xen-br0
>>
>> my problem is I want to rename the default bridge eth2 for an experiment.
>> Which I am unable to.
>>
>
> Humor me and copy and paste the output of brctl show please. Reading the
> docs may not be the best way to guess what actually is happening. Doing a
> brctl show will tell you in one second.
>
>
> Grant McWilliams
>



-- 
Tapas
http://news.gmane.org/gmane.comp.emulators.xen.user
+91 8971248477

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users