[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32 (root@xenhv6) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Mon Feb 22 16:10:30 CET 2010 [ 0.000000] Command line: root=/dev/sda6 ro console=tty0 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 000000000009c400 (usable) [ 0.000000] Xen: 000000000009c400 - 0000000000100000 (reserved) [ 0.000000] Xen: 0000000000100000 - 000000007d8ed000 (usable) [ 0.000000] Xen: 000000007d8ed000 - 000000007d99d000 (reserved) [ 0.000000] Xen: 000000007d99d000 - 000000007f68f000 (usable) [ 0.000000] Xen: 000000007f68f000 - 000000007f6df000 (reserved) [ 0.000000] Xen: 000000007f6df000 - 000000007f7df000 (ACPI NVS) [ 0.000000] Xen: 000000007f7df000 - 000000007f7ff000 (ACPI data) [ 0.000000] Xen: 000000007f7ff000 - 000000007f800000 (usable) [ 0.000000] Xen: 000000007f800000 - 0000000090000000 (reserved) [ 0.000000] Xen: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] Xen: 00000000fec80000 - 00000000fec81000 (reserved) [ 0.000000] Xen: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] Xen: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] Xen: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.5 present. [ 0.000000] last_pfn = 0x7f800 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-000000007f800000 [ 0.000000] 0000000000 - 007f800000 page 4k [ 0.000000] kernel direct mapping tables up to 7f800000 @ 100000-4ff000 [ 0.000000] RAMDISK: 019ff000 - 02590200 [ 0.000000] ACPI: RSDP 00000000000fdfd0 00024 (v02 IBM ) [ 0.000000] ACPI: XSDT 000000007f7fe120 0008C (v01 IBM THURLEY 00000000 01000013) [ 0.000000] ACPI: FACP 000000007f7fb000 000F4 (v04 IBM THURLEY 00000000 IBM 01000013) [ 0.000000] ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default 16 (20090903/tbfadt-607) [ 0.000000] ACPI: DSDT 000000007f7f8000 02772 (v01 IBM THURLEY 00000003 IBM 01000013) [ 0.000000] ACPI: FACS 000000007f735000 00040 [ 0.000000] ACPI: TCPA 000000007f7fd000 00064 (v00 00000000 00000000) [ 0.000000] ACPI: APIC 000000007f7f7000 000DE (v02 IBM THURLEY 00000000 IBM 01000013) [ 0.000000] ACPI: MCFG 000000007f7f6000 0003C (v01 IBM THURLEY 00000001 IBM 01000013) [ 0.000000] ACPI: SLIC 000000007f7f5000 00176 (v01 IBM THURLEY 00000000 IBM 01000013) [ 0.000000] ACPI: HPET 000000007f7f4000 00038 (v01 IBM THURLEY 00000001 IBM 01000013) [ 0.000000] ACPI: SRAT 000000007f7f3000 001A8 (v02 IBM THURLEY 00000001 IBM 01000013) [ 0.000000] ACPI: SLIT 000000007f7f2000 00030 (v01 IBM THURLEY 00000000 IBM 01000013) [ 0.000000] ACPI: SSDT 000000007f7f1000 00113 (v02 IBM CPUSCOPE 00004000 IBM 01000013) [ 0.000000] ACPI: SSDT 000000007f7ef000 01EA4 (v02 IBM PSTATEPM 00004000 IBM 01000013) [ 0.000000] ACPI: SSDT 000000007f7ee000 00832 (v02 IBM CPUCSTAT 00004000 IBM 01000013) [ 0.000000] ACPI: ERST 000000007f7ed000 00230 (v01 IBM THURLEY 00000001 IBM 01000013) [ 0.000000] ACPI: 000000007f7ec000 000C8 (v01 IBM THURLEY 00000001 IBM 01000013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 2 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 4 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 6 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 16 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 18 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 20 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 22 -> Node 1 [ 0.000000] SRAT: PXM 0 -> APIC 1 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 3 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 5 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 7 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 17 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 19 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 21 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 23 -> Node 1 [ 0.000000] SRAT: Node 0 PXM 0 0-80000000 [ 0.000000] SRAT: Node 0 PXM 0 100000000-480000000 [ 0.000000] SRAT: Node 1 PXM 1 480000000-880000000 [ 0.000000] NUMA: Using 31 for the hash shift. [ 0.000000] Bootmem setup node 0 0000000000000000-000000007f800000 [ 0.000000] NODE_DATA [0000000000008000 - 0000000000016fff] [ 0.000000] bootmap [0000000000017000 - 0000000000026eff] pages 10 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 007f800000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0002992000 - 00029ab000] XEN PAGETABLES ==> [0002992000 - 00029ab000] [ 0.000000] #2 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #3 [0001000000 - 00019de758] TEXT DATA BSS ==> [0001000000 - 00019de758] [ 0.000000] #4 [00019ff000 - 0002590200] RAMDISK ==> [00019ff000 - 0002590200] [ 0.000000] #5 [0002591000 - 0002992000] XEN START INFO ==> [0002591000 - 0002992000] [ 0.000000] #6 [00019df000 - 00019df478] BRK ==> [00019df000 - 00019df478] [ 0.000000] #7 [0000100000 - 00004e3000] PGTABLE ==> [0000100000 - 00004e3000] [ 0.000000] #8 [0000001000 - 0000001030] ACPI SLIT ==> [0000001000 - 0000001030] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009c [ 0.000000] 0: 0x00000100 -> 0x0007d8ed [ 0.000000] 0: 0x0007d99d -> 0x0007f68f [ 0.000000] 0: 0x0007f7ff -> 0x0007f800 [ 0.000000] On node 0 totalpages: 521596 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 998 pages reserved [ 0.000000] DMA zone: 2942 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7084 pages used for memmap [ 0.000000] DMA32 zone: 510516 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x588 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x11] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x13] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x15] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x17] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-0 [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 9, version 0, address 0xfec80000, GSI 24-24 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 2 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ERROR: Unable to locate IOAPIC for GSI 9 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 280 [ 0.000000] Allocating PCI resources starting at 90000000 (gap: 90000000:6ec00000) [ 0.000000] Booting paravirtualized kernel on Xen [ 0.000000] Xen version: 4.0.0-rc4 (preserve-AD) (dom0) [ 0.000000] NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:2 nr_node_ids:2 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800029be000 s84376 r8192 d22120 u114688 [ 0.000000] pcpu-alloc: s84376 r8192 d22120 u114688 alloc=28*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.073022] trying to map vcpu_info 0 at ffff8800029c9020, mfn 4769c9, offset 32 [ 0.073026] cpu 0 using vcpu_info at ffff8800029c9020 [ 0.073027] trying to map vcpu_info 1 at ffff8800029e5020, mfn 4769e5, offset 32 [ 0.073030] cpu 1 using vcpu_info at ffff8800029e5020 [ 0.073031] Xen: using vcpu_info placement [ 0.073035] Built 1 zonelists in Node order, mobility grouping on. Total pages: 513458 [ 0.073037] Policy zone: DMA32 [ 0.073039] Kernel command line: root=/dev/sda6 ro console=tty0 [ 0.073054] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.073358] Initializing CPU#0 [ 0.080631] DMA: Placing 64MB software IO TLB between ffff8800049bc000 - ffff8800089bc000 [ 0.080634] DMA: software IO TLB at phys 0x49bc000 - 0x89bc000 [ 0.080636] xen_swiotlb_fixup: buf=ffff8800049bc000 size=67108864 [ 0.098714] xen_swiotlb_fixup: buf=ffff880008a1c000 size=32768 [ 0.104842] Memory: 1961136k/2088960k available (3308k kernel code, 2576k absent, 125248k reserved, 5155k data, 596k init) [ 0.104909] Hierarchical RCU implementation. [ 0.104913] NR_IRQS:768 [ 0.104994] xen: registering gsi 0 triggering 1 polarity 0 [ 0.104998] xen: --> irq=0 [ 0.105000] Already setup the GSI :0 [ 0.105005] xen: registering gsi 1 triggering 1 polarity 0 [ 0.105008] xen: --> irq=1 [ 0.105009] Already setup the GSI :1 [ 0.105011] xen: registering gsi 2 triggering 1 polarity 0 [ 0.105014] xen: --> irq=2 [ 0.105015] Already setup the GSI :2 [ 0.105017] xen: registering gsi 3 triggering 1 polarity 0 [ 0.105020] xen: --> irq=3 [ 0.105021] Already setup the GSI :3 [ 0.105023] xen: registering gsi 4 triggering 1 polarity 0 [ 0.105026] xen: --> irq=4 [ 0.105027] Already setup the GSI :4 [ 0.105029] xen: registering gsi 5 triggering 1 polarity 0 [ 0.105032] xen: --> irq=5 [ 0.105033] Already setup the GSI :5 [ 0.105035] xen: registering gsi 6 triggering 1 polarity 0 [ 0.105038] xen: --> irq=6 [ 0.105039] Already setup the GSI :6 [ 0.105041] xen: registering gsi 7 triggering 1 polarity 0 [ 0.105044] xen: --> irq=7 [ 0.105045] Already setup the GSI :7 [ 0.105047] xen: registering gsi 8 triggering 1 polarity 0 [ 0.105050] xen: --> irq=8 [ 0.105051] Already setup the GSI :8 [ 0.105053] xen: registering gsi 9 triggering 1 polarity 0 [ 0.105056] xen: --> irq=9 [ 0.105057] Already setup the GSI :9 [ 0.105059] xen: registering gsi 10 triggering 1 polarity 0 [ 0.105062] xen: --> irq=10 [ 0.105063] Already setup the GSI :10 [ 0.105065] xen: registering gsi 11 triggering 1 polarity 0 [ 0.105068] xen: --> irq=11 [ 0.105069] Already setup the GSI :11 [ 0.105071] xen: registering gsi 12 triggering 1 polarity 0 [ 0.105074] xen: --> irq=12 [ 0.105075] Already setup the GSI :12 [ 0.105077] xen: registering gsi 13 triggering 1 polarity 0 [ 0.105081] xen: --> irq=13 [ 0.105082] Already setup the GSI :13 [ 0.105085] xen: registering gsi 14 triggering 1 polarity 0 [ 0.105088] xen: --> irq=14 [ 0.105089] Already setup the GSI :14 [ 0.105091] xen: registering gsi 15 triggering 1 polarity 0 [ 0.105094] xen: --> irq=15 [ 0.105095] Already setup the GSI :15 [ 0.113214] Console: colour VGA+ 80x25 [ 0.123898] console [tty0] enabled [ 0.123986] Xen: using vcpuop timer interface [ 0.123985] installing Xen timer for CPU 0 [ 0.124063] Detected 2933.472 MHz processor. [ 0.124133] Calibrating delay loop (skipped), value calculated using timer frequency.. 5866.94 BogoMIPS (lpj=11733888) [ 0.124306] Security Framework initialized [ 0.124377] SELinux: Disabled at boot. [ 0.124782] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.125314] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.125550] Mount-cache hash table entries: 256 [ 0.125722] Initializing cgroup subsys ns [ 0.125788] Initializing cgroup subsys cpuacct [ 0.125854] Initializing cgroup subsys devices [ 0.125952] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.126062] CPU: L2 cache: 256K [ 0.126124] CPU: L3 cache: 8192K [ 0.126188] CPU 0/0x0 -> Node 0 [ 0.126251] CPU: Unsupported number of siblings 16 [ 0.126303] Performance Events: unsupported p6 CPU model 26 no PMU driver, software events only. [ 0.133742] SMP alternatives: switching to UP code [ 0.160569] ACPI: Core revision 20090903 [ 0.166525] installing Xen timer for CPU 1 [ 0.166612] SMP alternatives: switching to SMP code [ 0.000006] Initializing CPU#1 [ 0.000039] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.000041] CPU: L2 cache: 256K [ 0.000042] CPU: L3 cache: 8192K [ 0.000045] CPU 1/0x0 -> Node 0 [ 0.000047] CPU: Unsupported number of siblings 16 [ 0.192736] Brought up 2 CPUs [ 0.193185] CPU0 attaching sched-domain: [ 0.193188] domain 0: span 0-1 level CPU [ 0.193190] groups: 0 1 [ 0.193194] domain 1: span 0-1 level NODE [ 0.193197] groups: 0-1 (cpu_power = 2048) [ 0.193202] CPU1 attaching sched-domain: [ 0.193203] domain 0: span 0-1 level CPU [ 0.193205] groups: 1 0 [ 0.193209] domain 1: span 0-1 level NODE [ 0.193211] groups: 0-1 (cpu_power = 2048) [ 0.194021] Grant table initialized [ 0.194153] NET: Registered protocol family 16 [ 0.194605] xenbus_probe_init ok [ 0.195076] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.195165] ACPI: bus type pci registered [ 0.195517] PCI: MCFG configuration 0: base 80000000 segment 0 buses 0 - 255 [ 0.195588] PCI: MCFG area at 80000000 reserved in E820 [ 0.235202] PCI: Using MMCONFIG at 80000000 - 8fffffff [ 0.235272] PCI: Using configuration type 1 for base access [ 0.239660] bio: create slab at 0 [ 0.240611] ACPI: EC: Look up EC in DSDT [ 0.249599] ACPI: Interpreter enabled [ 0.249665] ACPI: (supports S0 S5) [ 0.249823] ACPI: Using IOAPIC for interrupt routing [ 0.259350] ACPI Warning: Incorrect checksum in table [ ] - 95, should be D9 (20090903/tbutils-314) [ 0.259607] ACPI: No dock devices found. [ 0.259894] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.260151] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 0.260222] pci 0000:00:00.0: PME# disabled [ 0.260405] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.260476] pci 0000:00:01.0: PME# disabled [ 0.260659] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.260731] pci 0000:00:02.0: PME# disabled [ 0.260917] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.260991] pci 0000:00:03.0: PME# disabled [ 0.261186] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 0.261257] pci 0000:00:07.0: PME# disabled [ 0.262134] pci 0000:00:16.0: reg 10 64bit mmio: [0x9fb00000-0x9fb03fff] [ 0.262251] pci 0000:00:16.1: reg 10 64bit mmio: [0x9fb04000-0x9fb07fff] [ 0.262367] pci 0000:00:16.2: reg 10 64bit mmio: [0x9fb08000-0x9fb0bfff] [ 0.262483] pci 0000:00:16.3: reg 10 64bit mmio: [0x9fb0c000-0x9fb0ffff] [ 0.262599] pci 0000:00:16.4: reg 10 64bit mmio: [0x9fb10000-0x9fb13fff] [ 0.262715] pci 0000:00:16.5: reg 10 64bit mmio: [0x9fb14000-0x9fb17fff] [ 0.262831] pci 0000:00:16.6: reg 10 64bit mmio: [0x9fb18000-0x9fb1bfff] [ 0.262947] pci 0000:00:16.7: reg 10 64bit mmio: [0x9fb1c000-0x9fb1ffff] [ 0.263097] pci 0000:00:1a.0: reg 20 io port: [0x30a0-0x30bf] [ 0.263213] pci 0000:00:1a.1: reg 20 io port: [0x3080-0x309f] [ 0.263334] pci 0000:00:1a.7: reg 10 32bit mmio: [0x9fb21400-0x9fb217ff] [ 0.263422] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.263494] pci 0000:00:1a.7: PME# disabled [ 0.263668] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.263739] pci 0000:00:1c.0: PME# disabled [ 0.263914] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.263987] pci 0000:00:1c.4: PME# disabled [ 0.264143] pci 0000:00:1d.0: reg 20 io port: [0x3060-0x307f] [ 0.264257] pci 0000:00:1d.1: reg 20 io port: [0x3040-0x305f] [ 0.264373] pci 0000:00:1d.2: reg 20 io port: [0x3020-0x303f] [ 0.264492] pci 0000:00:1d.7: reg 10 32bit mmio: [0x9fb21000-0x9fb213ff] [ 0.264580] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.264654] pci 0000:00:1d.7: PME# disabled [ 0.264994] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07] [ 0.265003] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03] [ 0.265011] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07] [ 0.265019] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03] [ 0.265027] pci 0000:00:1f.2: reg 20 io port: [0x30f0-0x30ff] [ 0.265036] pci 0000:00:1f.2: reg 24 io port: [0x30e0-0x30ef] [ 0.265115] pci 0000:00:1f.3: reg 10 64bit mmio: [0x9fb21800-0x9fb218ff] [ 0.265137] pci 0000:00:1f.3: reg 20 io port: [0x3000-0x301f] [ 0.265212] pci 0000:00:1f.5: reg 10 io port: [0x3108-0x310f] [ 0.265220] pci 0000:00:1f.5: reg 14 io port: [0x3124-0x3127] [ 0.265228] pci 0000:00:1f.5: reg 18 io port: [0x3100-0x3107] [ 0.265237] pci 0000:00:1f.5: reg 1c io port: [0x3120-0x3123] [ 0.265245] pci 0000:00:1f.5: reg 20 io port: [0x30d0-0x30df] [ 0.265253] pci 0000:00:1f.5: reg 24 io port: [0x30c0-0x30cf] [ 0.265379] pci 0000:0b:00.0: reg 10 64bit mmio: [0x9a000000-0x9bffffff] [ 0.265467] pci 0000:0b:00.0: PME# supported from D0 D3hot D3cold [ 0.265539] pci 0000:0b:00.0: PME# disabled [ 0.265683] pci 0000:0b:00.1: reg 10 64bit mmio: [0x9c000000-0x9dffffff] [ 0.265770] pci 0000:0b:00.1: PME# supported from D0 D3hot D3cold [ 0.265841] pci 0000:0b:00.1: PME# disabled [ 0.265975] pci 0000:00:01.0: bridge 32bit mmio: [0x9a000000-0x9dffffff] [ 0.266055] pci 0000:10:00.0: reg 10 64bit mmio: [0x96000000-0x97ffffff] [ 0.266137] pci 0000:10:00.0: PME# supported from D0 D3hot D3cold [ 0.266214] pci 0000:10:00.0: PME# disabled [ 0.266362] pci 0000:10:00.1: reg 10 64bit mmio: [0x98000000-0x99ffffff] [ 0.266449] pci 0000:10:00.1: PME# supported from D0 D3hot D3cold [ 0.266525] pci 0000:10:00.1: PME# disabled [ 0.266660] pci 0000:00:02.0: bridge 32bit mmio: [0x96000000-0x99ffffff] [ 0.266742] pci 0000:15:00.0: reg 10 64bit mmio: [0x92000000-0x93ffffff] [ 0.266831] pci 0000:15:00.0: PME# supported from D0 D3hot D3cold [ 0.266905] pci 0000:15:00.0: PME# disabled [ 0.267052] pci 0000:15:00.1: reg 10 64bit mmio: [0x94000000-0x95ffffff] [ 0.267141] pci 0000:15:00.1: PME# supported from D0 D3hot D3cold [ 0.267215] pci 0000:15:00.1: PME# disabled [ 0.267352] pci 0000:00:03.0: bridge 32bit mmio: [0x92000000-0x95ffffff] [ 0.267408] pci 0000:1a:00.0: reg 10 io port: [0x2200-0x22ff] [ 0.267425] pci 0000:1a:00.0: reg 14 64bit mmio: [0x9fa00000-0x9fa03fff] [ 0.267457] pci 0000:1a:00.0: reg 30 32bit mmio pref: [0xfffc0000-0xffffffff] [ 0.267563] pci 0000:1a:00.1: reg 10 io port: [0x2000-0x20ff] [ 0.267580] pci 0000:1a:00.1: reg 14 64bit mmio: [0x9fa04000-0x9fa07fff] [ 0.267611] pci 0000:1a:00.1: reg 30 32bit mmio pref: [0xfffc0000-0xffffffff] [ 0.267732] pci 0000:00:07.0: bridge io port: [0x2000-0x2fff] [ 0.267737] pci 0000:00:07.0: bridge 32bit mmio: [0x9fa00000-0x9fafffff] [ 0.267798] pci 0000:01:00.0: reg 10 io port: [0x1000-0x10ff] [ 0.267817] pci 0000:01:00.0: reg 14 64bit mmio: [0x9f940000-0x9f943fff] [ 0.267835] pci 0000:01:00.0: reg 1c 64bit mmio: [0x9f900000-0x9f93ffff] [ 0.267854] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfffc0000-0xffffffff] [ 0.267905] pci 0000:01:00.0: supports D1 D2 [ 0.267980] pci 0000:00:1c.0: bridge io port: [0x1000-0x1fff] [ 0.267986] pci 0000:00:1c.0: bridge 32bit mmio: [0x9f900000-0x9f9fffff] [ 0.268152] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold [ 0.268224] pci 0000:06:00.0: PME# disabled [ 0.268374] pci 0000:00:1c.4: bridge 32bit mmio: [0x9f000000-0x9f8fffff] [ 0.268382] pci 0000:00:1c.4: bridge 64bit mmio pref: [0x9e000000-0x9effffff] [ 0.268450] pci 0000:07:00.0: reg 10 32bit mmio pref: [0x9e000000-0x9effffff] [ 0.268462] pci 0000:07:00.0: reg 14 32bit mmio: [0x9f800000-0x9f803fff] [ 0.268474] pci 0000:07:00.0: reg 18 32bit mmio: [0x9f000000-0x9f7fffff] [ 0.268646] pci 0000:06:00.0: bridge 32bit mmio: [0x9f000000-0x9f8fffff] [ 0.268653] pci 0000:06:00.0: bridge 32bit mmio pref: [0x9e000000-0x9effffff] [ 0.268741] pci 0000:00:1e.0: transparent bridge [ 0.268867] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.269340] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.269397] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT] [ 0.269458] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI7._PRT] [ 0.283760] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.284547] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.285341] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [ 0.286143] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.286903] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.287755] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.288522] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.289296] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.290261] xenbus_probe_backend_init bus registered ok [ 0.290401] xenbus_probe_frontend_init bus registered ok [ 0.290472] xen_balloon: Initialising balloon driver with page order 0. [ 0.290848] vgaarb: device added: PCI:0000:07:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.290942] vgaarb: loaded [ 0.291316] SCSI subsystem initialized [ 0.291575] usbcore: registered new interface driver usbfs [ 0.291775] usbcore: registered new interface driver hub [ 0.291957] usbcore: registered new device driver usb [ 0.292385] PCI: Using ACPI for IRQ routing [ 0.292855] Switching to clocksource xen [ 0.102356] pnp: PnP ACPI init [ 0.102439] ACPI: bus type pnp registered [ 0.103831] xen: registering gsi 8 triggering 1 polarity 0 [ 0.103833] xen_allocate_pirq: returning irq 8 for gsi 8 [ 0.103901] xen: --> irq=8 [ 0.103903] Already setup the GSI :8 [ 0.104087] xen: registering gsi 13 triggering 1 polarity 0 [ 0.104089] xen_allocate_pirq: returning irq 13 for gsi 13 [ 0.104157] xen: --> irq=13 [ 0.104210] Already setup the GSI :13 [ 0.297635] xen: registering gsi 4 triggering 1 polarity 0 [ 0.297637] xen_allocate_pirq: returning irq 4 for gsi 4 [ 0.297704] xen: --> irq=4 [ 0.297706] Already setup the GSI :4 [ 0.298078] xen: registering gsi 3 triggering 1 polarity 0 [ 0.298081] xen_allocate_pirq: returning irq 3 for gsi 3 [ 0.298149] xen: --> irq=3 [ 0.298151] Already setup the GSI :3 [ 0.298847] pnp: PnP ACPI: found 13 devices [ 0.298912] ACPI: ACPI bus type pnp unregistered [ 0.298985] system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved [ 0.299059] system 00:06: ioport range 0x400-0x43f has been reserved [ 0.299128] system 00:06: ioport range 0x440-0x45f has been reserved [ 0.299199] system 00:06: ioport range 0x460-0x47f has been reserved [ 0.299268] system 00:06: ioport range 0x580-0x5ff has been reserved [ 0.299337] system 00:06: ioport range 0x5e0-0x5ff has been reserved [ 0.299407] system 00:06: ioport range 0xcf9-0xcf9 could not be reserved [ 0.299480] system 00:0a: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.299551] system 00:0a: iomem range 0xfec00000-0xfecfffff could not be reserved [ 0.299636] system 00:0a: iomem range 0xfee00000-0xfeefffff could not be reserved [ 0.299721] system 00:0a: iomem range 0x80000000-0x8fffffff has been reserved [ 0.299796] system 00:0a: iomem range 0xffc00000-0xffffffff has been reserved [ 0.299866] system 00:0a: iomem range 0xfeb00000-0xfebfffff has been reserved [ 0.299936] system 00:0a: iomem range 0xfe710000-0xfe711fff has been reserved [ 0.300007] system 00:0a: iomem range 0xfe800000-0xfe9fffff has been reserved [ 0.300078] system 00:0a: iomem range 0xfc000000-0xfcffffff has been reserved [ 0.300148] system 00:0a: iomem range 0xfea00000-0xfeafffff has been reserved [ 0.300221] system 00:0b: ioport range 0xca0-0xca1 has been reserved [ 0.300290] system 00:0b: ioport range 0xca4-0xca9 has been reserved [ 0.300360] system 00:0b: ioport range 0xcaa-0xcab has been reserved [ 0.300430] system 00:0b: ioport range 0xcac-0xccb has been reserved [ 0.300500] system 00:0c: ioport range 0xca2-0xca2 has been reserved [ 0.300569] system 00:0c: ioport range 0xca3-0xca3 has been reserved [ 0.305305] PM-Timer failed consistency check (0x0xffffff) - aborting. [ 0.305395] pci 0000:1a:00.0: BAR 6: no parent found for of device [0xfffc0000-0xffffffff] [ 0.305483] pci 0000:1a:00.1: BAR 6: no parent found for of device [0xfffc0000-0xffffffff] [ 0.305571] pci 0000:01:00.0: BAR 6: no parent found for of device [0xfffc0000-0xffffffff] [ 0.305751] pci 0000:00:01.0: PCI bridge, secondary bus 0000:0b [ 0.305822] pci 0000:00:01.0: IO window: disabled [ 0.305894] pci 0000:00:01.0: MEM window: 0x9a000000-0x9dffffff [ 0.305965] pci 0000:00:01.0: PREFETCH window: disabled [ 0.306035] pci 0000:00:02.0: PCI bridge, secondary bus 0000:10 [ 0.306102] pci 0000:00:02.0: IO window: disabled [ 0.306172] pci 0000:00:02.0: MEM window: 0x96000000-0x99ffffff [ 0.306243] pci 0000:00:02.0: PREFETCH window: disabled [ 0.306314] pci 0000:00:03.0: PCI bridge, secondary bus 0000:15 [ 0.306381] pci 0000:00:03.0: IO window: disabled [ 0.306451] pci 0000:00:03.0: MEM window: 0x92000000-0x95ffffff [ 0.306522] pci 0000:00:03.0: PREFETCH window: disabled [ 0.306592] pci 0000:00:07.0: PCI bridge, secondary bus 0000:1a [ 0.306662] pci 0000:00:07.0: IO window: 0x2000-0x2fff [ 0.306734] pci 0000:00:07.0: MEM window: 0x9fa00000-0x9fafffff [ 0.306808] pci 0000:00:07.0: PREFETCH window: 0x90000000-0x900fffff [ 0.306881] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 [ 0.306951] pci 0000:00:1c.0: IO window: 0x1000-0x1fff [ 0.307022] pci 0000:00:1c.0: MEM window: 0x9f900000-0x9f9fffff [ 0.307093] pci 0000:00:1c.0: PREFETCH window: 0x90100000-0x902fffff [ 0.307165] pci 0000:06:00.0: PCI bridge, secondary bus 0000:07 [ 0.307233] pci 0000:06:00.0: IO window: disabled [ 0.307307] pci 0000:06:00.0: MEM window: 0x9f000000-0x9f8fffff [ 0.307379] pci 0000:06:00.0: PREFETCH window: 0x9e000000-0x9effffff [ 0.307452] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:06 [ 0.307520] pci 0000:00:1c.4: IO window: disabled [ 0.307592] pci 0000:00:1c.4: MEM window: 0x9f000000-0x9f8fffff [ 0.307663] pci 0000:00:1c.4: PREFETCH window: 0x0000009e000000-0x0000009effffff [ 0.307754] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:1f [ 0.307822] pci 0000:00:1e.0: IO window: disabled [ 0.307892] pci 0000:00:1e.0: MEM window: disabled [ 0.307961] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.308040] xen: registering gsi 28 triggering 0 polarity 1 [ 0.308044] xen: --> irq=28 [ 0.308073] pci 0000:00:01.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28 [ 0.308146] pci 0000:00:01.0: setting latency timer to 64 [ 0.308155] xen: registering gsi 29 triggering 0 polarity 1 [ 0.308158] xen: --> irq=29 [ 0.308184] pci 0000:00:02.0: PCI INT A -> GSI 29 (level, low) -> IRQ 29 [ 0.308257] pci 0000:00:02.0: setting latency timer to 64 [ 0.308267] xen: registering gsi 24 triggering 0 polarity 1 [ 0.308270] xen: --> irq=24 [ 0.308296] pci 0000:00:03.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 [ 0.308368] pci 0000:00:03.0: setting latency timer to 64 [ 0.308378] xen: registering gsi 30 triggering 0 polarity 1 [ 0.308381] xen: --> irq=30 [ 0.308408] pci 0000:00:07.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30 [ 0.308481] pci 0000:00:07.0: setting latency timer to 64 [ 0.308492] xen: registering gsi 16 triggering 0 polarity 1 [ 0.308495] xen: --> irq=16 [ 0.308520] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.308593] pci 0000:00:1c.0: setting latency timer to 64 [ 0.308603] xen: registering gsi 16 triggering 0 polarity 1 [ 0.308605] xen_allocate_pirq: returning irq 16 for gsi 16 [ 0.308672] xen: --> irq=16 [ 0.308673] Already setup the GSI :16 [ 0.308738] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.308812] pci 0000:00:1c.4: setting latency timer to 64 [ 0.308825] xen: registering gsi 16 triggering 0 polarity 1 [ 0.308827] xen_allocate_pirq: returning irq 16 for gsi 16 [ 0.308894] xen: --> irq=16 [ 0.308896] Already setup the GSI :16 [ 0.308960] pci 0000:06:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.309034] pci 0000:06:00.0: setting latency timer to 64 [ 0.309045] pci 0000:00:1e.0: setting latency timer to 64 [ 0.309049] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.309051] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.309053] pci_bus 0000:0b: resource 1 mem: [0x9a000000-0x9dffffff] [ 0.309055] pci_bus 0000:10: resource 1 mem: [0x96000000-0x99ffffff] [ 0.309057] pci_bus 0000:15: resource 1 mem: [0x92000000-0x95ffffff] [ 0.309059] pci_bus 0000:1a: resource 0 io: [0x2000-0x2fff] [ 0.309061] pci_bus 0000:1a: resource 1 mem: [0x9fa00000-0x9fafffff] [ 0.309063] pci_bus 0000:1a: resource 2 pref mem [0x90000000-0x900fffff] [ 0.309065] pci_bus 0000:01: resource 0 io: [0x1000-0x1fff] [ 0.309067] pci_bus 0000:01: resource 1 mem: [0x9f900000-0x9f9fffff] [ 0.309069] pci_bus 0000:01: resource 2 pref mem [0x90100000-0x902fffff] [ 0.309071] pci_bus 0000:06: resource 1 mem: [0x9f000000-0x9f8fffff] [ 0.309072] pci_bus 0000:06: resource 2 pref mem [0x9e000000-0x9effffff] [ 0.309074] pci_bus 0000:07: resource 1 mem: [0x9f000000-0x9f8fffff] [ 0.309076] pci_bus 0000:07: resource 2 pref mem [0x9e000000-0x9effffff] [ 0.309078] pci_bus 0000:1f: resource 3 io: [0x00-0xffff] [ 0.309080] pci_bus 0000:1f: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.309148] NET: Registered protocol family 2 [ 0.316521] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.317343] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.318175] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.318401] TCP: Hash tables configured (established 262144 bind 65536) [ 0.318470] TCP reno registered [ 0.318615] NET: Registered protocol family 1 [ 0.318846] pci 0000:07:00.0: Boot video device [ 0.318881] Trying to unpack rootfs image as initramfs... [ 0.326511] Freeing initrd memory: 11844k freed [ 0.328756] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.328832] DMA: Placing 64MB software IO TLB between ffff8800049bc000 - ffff8800089bc000 [ 0.328918] DMA: software IO TLB at phys 0x49bc000 - 0x89bc000 [ 0.330657] audit: initializing netlink socket (disabled) [ 0.330738] type=2000 audit(1267394157.580:1): initialized [ 0.331046] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.331299] VFS: Disk quotas dquot_6.5.2 [ 0.331389] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.331685] msgmni has been set to 3853 [ 0.139391] alg: No test for stdrng (krng) [ 0.332206] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.332303] io scheduler noop registered [ 0.332368] io scheduler anticipatory registered [ 0.332434] io scheduler deadline registered [ 0.332522] io scheduler cfq registered (default) [ 0.332898] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.333239] pcieport 0000:00:02.0: setting latency timer to 64 [ 0.333573] pcieport 0000:00:03.0: setting latency timer to 64 [ 0.333906] pcieport 0000:00:07.0: setting latency timer to 64 [ 0.334293] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.334678] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.334985] Firmware did not grant requested _OSC control [ 0.334987] aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support [ 0.334993] Firmware did not grant requested _OSC control [ 0.334995] aer 0000:00:02.0:pcie02: AER service couldn't init device: no _OSC support [ 0.335000] Firmware did not grant requested _OSC control [ 0.335002] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support [ 0.335007] Firmware did not grant requested _OSC control [ 0.335009] aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support [ 0.335273] Event-channel device installed. [ 0.338069] blktap_device_init: blktap device major 254 [ 0.338140] blktap_ring_init: blktap ring major: 252 [ 0.338907] registering netback [ 0.344980] hpet_acpi_add: no address or irqs in _CRS [ 0.345122] Linux agpgart interface v0.103 [ 0.345192] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.345536] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.345878] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.346600] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.347036] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.350121] brd: module loaded [ 0.351014] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v2.0.2 (Aug 21, 2009) [ 0.351116] xen: registering gsi 28 triggering 0 polarity 1 [ 0.351119] xen_allocate_pirq: returning irq 28 for gsi 28 [ 0.351186] xen: --> irq=28 [ 0.351188] Already setup the GSI :28 [ 0.351255] bnx2 0000:0b:00.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28 [ 0.351329] bnx2 0000:0b:00.0: setting latency timer to 64 [ 0.351509] bnx2 0000:0b:00.0: firmware: using built-in firmware bnx2/bnx2-mips-09-5.0.0.j3.fw [ 0.351597] bnx2 0000:0b:00.0: firmware: using built-in firmware bnx2/bnx2-rv2p-09-5.0.0.j3.fw [ 0.351876] eth0: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem 9a000000, IRQ 28, node addr e4:1f:13:2f:b0:48 [ 0.351987] xen: registering gsi 40 triggering 0 polarity 1 [ 0.351992] xen: --> irq=40 [ 0.352021] bnx2 0000:0b:00.1: PCI INT B -> GSI 40 (level, low) -> IRQ 40 [ 0.352095] bnx2 0000:0b:00.1: setting latency timer to 64 [ 0.352271] bnx2 0000:0b:00.1: firmware: using built-in firmware bnx2/bnx2-mips-09-5.0.0.j3.fw [ 0.352359] bnx2 0000:0b:00.1: firmware: using built-in firmware bnx2/bnx2-rv2p-09-5.0.0.j3.fw [ 0.352649] eth1: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem 9c000000, IRQ 40, node addr e4:1f:13:2f:b0:4a [ 0.352761] xen: registering gsi 29 triggering 0 polarity 1 [ 0.352763] xen_allocate_pirq: returning irq 29 for gsi 29 [ 0.352830] xen: --> irq=29 [ 0.352831] Already setup the GSI :29 [ 0.352897] bnx2 0000:10:00.0: PCI INT A -> GSI 29 (level, low) -> IRQ 29 [ 0.352971] bnx2 0000:10:00.0: setting latency timer to 64 [ 0.353147] bnx2 0000:10:00.0: firmware: using built-in firmware bnx2/bnx2-mips-09-5.0.0.j3.fw [ 0.353233] bnx2 0000:10:00.0: firmware: using built-in firmware bnx2/bnx2-rv2p-09-5.0.0.j3.fw [ 0.353509] eth2: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem 96000000, IRQ 29, node addr e4:1f:13:40:43:ac [ 0.353617] xen: registering gsi 41 triggering 0 polarity 1 [ 0.353621] xen: --> irq=41 [ 0.353649] bnx2 0000:10:00.1: PCI INT B -> GSI 41 (level, low) -> IRQ 41 [ 0.353722] bnx2 0000:10:00.1: setting latency timer to 64 [ 0.353898] bnx2 0000:10:00.1: firmware: using built-in firmware bnx2/bnx2-mips-09-5.0.0.j3.fw [ 0.353983] bnx2 0000:10:00.1: firmware: using built-in firmware bnx2/bnx2-rv2p-09-5.0.0.j3.fw [ 0.354267] eth3: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem 98000000, IRQ 41, node addr e4:1f:13:40:43:ae [ 0.354376] xen: registering gsi 24 triggering 0 polarity 1 [ 0.354378] xen_allocate_pirq: returning irq 24 for gsi 24 [ 0.354444] xen: --> irq=24 [ 0.354446] Already setup the GSI :24 [ 0.354510] bnx2 0000:15:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 [ 0.354583] bnx2 0000:15:00.0: setting latency timer to 64 [ 0.354758] bnx2 0000:15:00.0: firmware: using built-in firmware bnx2/bnx2-mips-09-5.0.0.j3.fw [ 0.354845] bnx2 0000:15:00.0: firmware: using built-in firmware bnx2/bnx2-rv2p-09-5.0.0.j3.fw [ 0.355133] eth4: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem 92000000, IRQ 24, node addr 00:10:18:57:92:3c [ 0.355243] xen: registering gsi 34 triggering 0 polarity 1 [ 0.355246] xen: --> irq=34 [ 0.355274] bnx2 0000:15:00.1: PCI INT B -> GSI 34 (level, low) -> IRQ 34 [ 0.355349] bnx2 0000:15:00.1: setting latency timer to 64 [ 0.355525] bnx2 0000:15:00.1: firmware: using built-in firmware bnx2/bnx2-mips-09-5.0.0.j3.fw [ 0.355612] bnx2 0000:15:00.1: firmware: using built-in firmware bnx2/bnx2-rv2p-09-5.0.0.j3.fw [ 0.355907] eth5: Broadcom NetXtreme II BCM5709 1000Base-T (C0) PCI Express found at mem 94000000, IRQ 34, node addr 00:10:18:57:92:3e [ 0.356354] PNP: No PS/2 controller found. Probing ports directly. [ 0.604710] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.604988] mice: PS/2 mouse device common for all mice [ 0.605136] Driver 'rtc_cmos' needs updating - please use bus_type methods [ 0.605232] rtc_cmos 00:02: RTC can wake from S4 [ 0.605386] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.605523] rtc0: alarms up to one month, y3k, 242 bytes nvram [ 0.605711] device-mapper: uevent: version 1.0.3 [ 0.605910] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx [ 0.606010] cpuidle: using governor ladder [ 0.606077] cpuidle: using governor menu [ 0.606148] No iBFT detected. [ 0.606434] TCP cubic registered [ 0.606501] NET: Registered protocol family 17 [ 0.606800] registered taskstats version 1 [ 0.608123] rtc_cmos 00:02: setting system clock to 2010-02-28 21:55:57 UTC (1267394157) [ 0.608218] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.608290] EDD information not available. [ 0.608451] Freeing unused kernel memory: 596k freed [ 0.839903] QLogic Fibre Channel HBA Driver: 8.03.01-k6 [ 0.840024] xen: registering gsi 30 triggering 0 polarity 1 [ 0.840026] xen_allocate_pirq: returning irq 30 for gsi 30 [ 0.840093] xen: --> irq=30 [ 0.840095] Already setup the GSI :30 [ 0.840162] qla2xxx 0000:1a:00.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30 [ 0.840266] qla2xxx 0000:1a:00.0: Found an ISP2432, irq 30, iobase 0xffffc90000370000 [ 1.036472] megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008 [ 1.036564] megasas: 0x1000:0x0079:0x1014:0x03b2: bus 1:slot 0:func 0 [ 1.036692] xen: registering gsi 16 triggering 0 polarity 1 [ 1.036694] xen_allocate_pirq: returning irq 16 for gsi 16 [ 1.036760] xen: --> irq=16 [ 1.036762] Already setup the GSI :16 [ 1.036830] megaraid_sas 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.036922] megaraid_sas 0000:01:00.0: setting latency timer to 64 [ 0.844582] qla2xxx 0000:1a:00.0: Configuring PCI space... [ 0.844657] qla2xxx 0000:1a:00.0: setting latency timer to 64 [ 0.860169] megasas: FW now in Ready state [ 0.876003] libata version 3.00 loaded. [ 0.878525] ata_piix 0000:00:1f.2: version 2.13 [ 0.878540] xen: registering gsi 16 triggering 0 polarity 1 [ 0.878543] xen_allocate_pirq: returning irq 16 for gsi 16 [ 0.878610] xen: --> irq=16 [ 0.878612] Already setup the GSI :16 [ 0.878678] ata_piix 0000:00:1f.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.878758] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.879083] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.879577] scsi2 : ata_piix [ 0.879724] scsi3 : ata_piix [ 0.879813] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30f0 irq 14 [ 0.879887] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30f8 irq 15 [ 0.879975] xen: registering gsi 21 triggering 0 polarity 1 [ 0.879981] xen: --> irq=21 [ 0.880012] ata_piix 0000:00:1f.5: PCI INT C -> GSI 21 (level, low) -> IRQ 21 [ 0.880088] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.880410] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 0.913086] scsi1 : LSI SAS based MegaRAID driver [ 0.913632] scsi4 : ata_piix [ 0.914403] scsi5 : ata_piix [ 0.914496] ata3: SATA max UDMA/133 cmd 0x3108 ctl 0x3124 bmdma 0x30d0 irq 21 [ 0.914570] ata4: SATA max UDMA/133 cmd 0x3100 ctl 0x3120 bmdma 0x30d8 irq 21 [ 0.939338] qla2xxx 0000:1a:00.0: Configure NVRAM parameters... [ 0.975842] qla2xxx 0000:1a:00.0: Verifying loaded RISC code... [ 0.988967] qla2xxx 0000:1a:00.0: firmware: requesting ql2400_fw.bin [ 0.994591] qla2xxx 0000:1a:00.0: FW: Loading via request-firmware... [ 1.219953] qla2xxx 0000:1a:00.0: Allocated (64 KB) for EFT... [ 1.220197] qla2xxx 0000:1a:00.0: Allocated (1285 KB) for firmware dump... [ 1.243065] ata4: SATA link down (SStatus 0 SControl 300) [ 1.446771] ata3: SATA link down (SStatus 0 SControl 300) [ 1.254282] scsi0 : qla2xxx [ 1.254452] qla2xxx 0000:1a:00.0: [ 1.254453] QLogic Fibre Channel HBA Driver: 8.03.01-k6 [ 1.254454] QLogic QLE2462 - PCI-Express Dual Channel 4Gb Fibre Channel HBA [ 1.254455] ISP2432: PCIe (2.5GT/s x4) @ 0000:1a:00.0 hdma-, host#=0, fw=5.03.02 (496) [ 1.254770] xen: registering gsi 37 triggering 0 polarity 1 [ 1.254775] xen: --> irq=37 [ 1.254804] qla2xxx 0000:1a:00.1: PCI INT B -> GSI 37 (level, low) -> IRQ 37 [ 1.254909] qla2xxx 0000:1a:00.1: Found an ISP2432, irq 37, iobase 0xffffc90000378000 [ 1.255361] qla2xxx 0000:1a:00.1: Configuring PCI space... [ 1.255433] qla2xxx 0000:1a:00.1: setting latency timer to 64 [ 1.287963] qla2xxx 0000:1a:00.1: Configure NVRAM parameters... [ 1.323626] qla2xxx 0000:1a:00.1: Verifying loaded RISC code... [ 1.336926] qla2xxx 0000:1a:00.1: FW: Loading via request-firmware... [ 1.694302] qla2xxx 0000:1a:00.0: LIP reset occurred (f7f7). [ 1.532067] ata2.00: SATA link down (SStatus 0 SControl 300) [ 1.532154] ata2.01: SATA link down (SStatus 0 SControl 300) [ 1.563917] qla2xxx 0000:1a:00.1: Allocated (64 KB) for EFT... [ 1.564161] qla2xxx 0000:1a:00.1: Allocated (1285 KB) for firmware dump... [ 1.579966] scsi6 : qla2xxx [ 1.580200] qla2xxx 0000:1a:00.1: [ 1.580200] QLogic Fibre Channel HBA Driver: 8.03.01-k6 [ 1.580201] QLogic QLE2462 - PCI-Express Dual Channel 4Gb Fibre Channel HBA [ 1.580202] ISP2432: PCIe (2.5GT/s x4) @ 0000:1a:00.1 hdma-, host#=6, fw=5.03.02 (496) [ 1.779728] qla2xxx 0000:1a:00.0: LOOP UP detected (4 Gbps). [ 1.868479] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.868566] ata1.01: SATA link down (SStatus 0 SControl 300) [ 1.868648] ata1.01: link offline, clearing class 3 to NONE [ 1.876622] ata1.00: ATAPI: HL-DT-STDVDRAM GT30N, IS09, max UDMA/100 [ 1.892628] ata1.00: configured for UDMA/100 [ 1.701451] scsi: waiting for bus probes to complete ... [ 2.288968] scsi: waiting for bus probes to complete ... [ 6.781979] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GT30N IS09 PQ: 0 ANSI: 5 [ 6.782338] scsi 0:0:0:0: Direct-Access IBM 1726-4xx FAStT 0617 PQ: 0 ANSI: 5 [ 6.782546] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 6.594403] sd 0:0:0:0: [sda] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB) [ 6.787419] sd 0:0:0:0: [sda] Write Protect is off [ 6.787499] sd 0:0:0:0: [sda] Mode Sense: 77 00 10 08 [ 6.787880] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA [ 6.789253] sda: sda2 [ 6.792671] sd 0:0:0:0: [sda] Attached SCSI disk [ 7.079413] kjournald starting. Commit interval 5 seconds [ 6.887149] EXT3-fs: mounted filesystem with writeback data mode. [ 7.695303] udevd version 125 started [ 8.101720] input: Power Button as /class/input/input0 [ 8.101815] ACPI: Power Button [PWRF] [ 8.449623] dca service started, version 1.12.1 [ 8.473441] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 8.473551] xen: registering gsi 16 triggering 0 polarity 1 [ 8.473554] xen_allocate_pirq: returning irq 16 for gsi 16 [ 8.473621] xen: --> irq=16 [ 8.473623] Already setup the GSI :16 [ 8.473690] ioatdma 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8.473780] ioatdma 0000:00:16.0: setting latency timer to 64 [ 8.287737] uhci_hcd: USB Universal Host Controller Interface driver [ 8.311693] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 8.311765] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 8.381303] xen: registering gsi 17 triggering 0 polarity 1 [ 8.381310] xen: --> irq=17 [ 8.381343] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 8.381428] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 8.381432] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 8.381518] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 8.381690] uhci_hcd 0000:00:1a.0: irq 17, io base 0x000030a0 [ 8.381822] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 8.381895] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.381988] usb usb1: Product: UHCI Host Controller [ 8.382067] usb usb1: Manufacturer: Linux 2.6.32 uhci_hcd [ 8.382135] usb usb1: SerialNumber: 0000:00:1a.0 [ 8.382257] usb usb1: configuration #1 chosen from 1 choice [ 8.382350] hub 1-0:1.0: USB hub found [ 8.382428] hub 1-0:1.0: 2 ports detected [ 8.382576] xen: registering gsi 19 triggering 0 polarity 1 [ 8.382579] xen: --> irq=19 [ 8.382608] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 8.382706] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 8.382712] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 8.382795] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 2 [ 8.382924] ehci_hcd 0000:00:1a.7: debug port 1 [ 8.386891] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 8.386945] ehci_hcd 0000:00:1a.7: irq 19, io mem 0x9fb21400 [ 8.400840] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 8.400929] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 8.401013] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.401104] usb usb2: Product: EHCI Host Controller [ 8.401175] usb usb2: Manufacturer: Linux 2.6.32 ehci_hcd [ 8.401250] usb usb2: SerialNumber: 0000:00:1a.7 [ 8.401356] usb usb2: configuration #1 chosen from 1 choice [ 8.401448] hub 2-0:1.0: USB hub found [ 8.401527] hub 2-0:1.0: 6 ports detected [ 8.624272] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 8.450885] xen: registering gsi 17 triggering 0 polarity 1 [ 8.450888] xen_allocate_pirq: returning irq 17 for gsi 17 [ 8.450955] xen: --> irq=17 [ 8.450956] Already setup the GSI :17 [ 8.451022] ioatdma 0000:00:16.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 8.451111] ioatdma 0000:00:16.1: setting latency timer to 64 [ 8.652207] input: PC Speaker as /class/input/input1 [ 8.742857] xen: registering gsi 18 triggering 0 polarity 1 [ 8.742865] xen: --> irq=18 [ 8.742901] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 8.742979] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 8.742983] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 8.743058] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3 [ 8.743220] uhci_hcd 0000:00:1a.1: irq 18, io base 0x00003080 [ 8.743351] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 8.743422] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.743509] usb usb3: Product: UHCI Host Controller [ 8.743577] usb usb3: Manufacturer: Linux 2.6.32 uhci_hcd [ 8.743645] usb usb3: SerialNumber: 0000:00:1a.1 [ 8.743756] usb usb3: configuration #1 chosen from 1 choice [ 8.743846] hub 3-0:1.0: USB hub found [ 8.743921] hub 3-0:1.0: 2 ports detected [ 8.551977] xen: registering gsi 17 triggering 0 polarity 1 [ 8.551981] xen_allocate_pirq: returning irq 17 for gsi 17 [ 8.552054] xen: --> irq=17 [ 8.552056] Already setup the GSI :17 [ 8.552121] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 8.552206] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 8.552210] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 8.552284] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 [ 8.552414] ehci_hcd 0000:00:1d.7: debug port 1 [ 8.556361] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 8.556384] ehci_hcd 0000:00:1d.7: irq 17, io mem 0x9fb21000 [ 8.568418] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 8.568510] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 8.568585] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.568674] usb usb4: Product: EHCI Host Controller [ 8.568744] usb usb4: Manufacturer: Linux 2.6.32 ehci_hcd [ 8.568814] usb usb4: SerialNumber: 0000:00:1d.7 [ 8.568926] usb usb4: configuration #1 chosen from 1 choice [ 8.569017] hub 4-0:1.0: USB hub found [ 8.569095] hub 4-0:1.0: 6 ports detected [ 8.761417] xen: registering gsi 22 triggering 0 polarity 1 [ 8.761421] xen: --> irq=22 [ 8.761451] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 8.570031] xen: registering gsi 18 triggering 0 polarity 1 [ 8.570035] xen_allocate_pirq: returning irq 18 for gsi 18 [ 8.570115] xen: --> irq=18 [ 8.570117] Already setup the GSI :18 [ 8.570187] ioatdma 0000:00:16.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 8.570275] ioatdma 0000:00:16.2: setting latency timer to 64 [ 8.861959] xen: registering gsi 17 triggering 0 polarity 1 [ 8.861964] xen_allocate_pirq: returning irq 17 for gsi 17 [ 8.862037] xen: --> irq=17 [ 8.862039] Already setup the GSI :17 [ 8.862105] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 8.862181] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 8.862185] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 8.862260] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 8.862373] uhci_hcd 0000:00:1d.0: irq 17, io base 0x00003060 [ 8.862491] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 8.862562] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.862647] usb usb5: Product: UHCI Host Controller [ 8.862714] usb usb5: Manufacturer: Linux 2.6.32 uhci_hcd [ 8.862783] usb usb5: SerialNumber: 0000:00:1d.0 [ 8.862887] usb usb5: configuration #1 chosen from 1 choice [ 8.862975] hub 5-0:1.0: USB hub found [ 8.863048] hub 5-0:1.0: 2 ports detected [ 8.671121] xen: registering gsi 19 triggering 0 polarity 1 [ 8.671125] xen_allocate_pirq: returning irq 19 for gsi 19 [ 8.671203] xen: --> irq=19 [ 8.671205] Already setup the GSI :19 [ 8.671271] ioatdma 0000:00:16.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 8.671357] ioatdma 0000:00:16.3: setting latency timer to 64 [ 8.963010] xen: registering gsi 18 triggering 0 polarity 1 [ 8.963014] xen_allocate_pirq: returning irq 18 for gsi 18 [ 8.963090] xen: --> irq=18 [ 8.963091] Already setup the GSI :18 [ 8.963157] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 8.963236] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 8.963240] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 8.963312] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 8.963424] uhci_hcd 0000:00:1d.1: irq 18, io base 0x00003040 [ 8.963553] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 8.963624] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.963709] usb usb6: Product: UHCI Host Controller [ 8.963775] usb usb6: Manufacturer: Linux 2.6.32 uhci_hcd [ 8.963843] usb usb6: SerialNumber: 0000:00:1d.1 [ 8.963944] usb usb6: configuration #1 chosen from 1 choice [ 8.964031] hub 6-0:1.0: USB hub found [ 8.964106] hub 6-0:1.0: 2 ports detected [ 8.772216] xen: registering gsi 16 triggering 0 polarity 1 [ 8.772220] xen_allocate_pirq: returning irq 16 for gsi 16 [ 8.772298] xen: --> irq=16 [ 8.772300] Already setup the GSI :16 [ 8.772368] ioatdma 0000:00:16.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8.772457] ioatdma 0000:00:16.4: setting latency timer to 64 [ 9.064099] xen: registering gsi 19 triggering 0 polarity 1 [ 9.064103] xen_allocate_pirq: returning irq 19 for gsi 19 [ 9.064182] xen: --> irq=19 [ 9.064184] Already setup the GSI :19 [ 9.064255] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 9.064334] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 9.064338] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 9.064413] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 9.064532] uhci_hcd 0000:00:1d.2: irq 19, io base 0x00003020 [ 9.064654] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 9.064723] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 9.064808] usb usb7: Product: UHCI Host Controller [ 9.064874] usb usb7: Manufacturer: Linux 2.6.32 uhci_hcd [ 9.064941] usb usb7: SerialNumber: 0000:00:1d.2 [ 9.065041] usb usb7: configuration #1 chosen from 1 choice [ 9.065128] hub 7-0:1.0: USB hub found [ 9.065207] hub 7-0:1.0: 2 ports detected [ 8.873494] xen: registering gsi 17 triggering 0 polarity 1 [ 8.873498] xen_allocate_pirq: returning irq 17 for gsi 17 [ 8.873575] xen: --> irq=17 [ 8.873577] Already setup the GSI :17 [ 8.873645] ioatdma 0000:00:16.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 8.873738] ioatdma 0000:00:16.5: setting latency timer to 64 [ 8.973382] xen: registering gsi 18 triggering 0 polarity 1 [ 8.973384] xen_allocate_pirq: returning irq 18 for gsi 18 [ 8.973452] xen: --> irq=18 [ 8.973454] Already setup the GSI :18 [ 8.973520] ioatdma 0000:00:16.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 8.973607] ioatdma 0000:00:16.6: setting latency timer to 64 [ 8.992408] usb 4-4: new high speed USB device using ehci_hcd and address 3 [ 9.073258] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 9.074117] xen: registering gsi 19 triggering 0 polarity 1 [ 9.074121] xen_allocate_pirq: returning irq 19 for gsi 19 [ 9.074188] xen: --> irq=19 [ 9.074190] Already setup the GSI :19 [ 9.074255] ioatdma 0000:00:16.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 9.081765] ioatdma 0000:00:16.7: setting latency timer to 64 [ 9.338136] usb 4-4: New USB device found, idVendor=090c, idProduct=1000 [ 9.338220] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 9.338291] usb 4-4: Product: USB Flash Disk [ 9.338357] usb 4-4: Manufacturer: General [ 9.338422] usb 4-4: SerialNumber: 4810010000135621 [ 9.338536] usb 4-4: configuration #1 chosen from 1 choice [ 9.353195] Initializing USB Mass Storage driver... [ 9.354761] scsi7 : SCSI emulation for USB Mass Storage devices [ 9.355086] usbcore: registered new interface driver usb-storage [ 9.355157] USB Mass Storage support registered. [ 9.357184] usb-storage: device found at 3 [ 9.357186] usb-storage: waiting for device to settle before scanning [ 9.635332] usb 5-2: new full speed USB device using uhci_hcd and address 2 [ 9.818287] usb 5-2: New USB device found, idVendor=04b3, idProduct=4010 [ 9.818370] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9.818444] usb 5-2: Product: RNDIS/CDC ETHER [ 9.818513] usb 5-2: Manufacturer: IBM [ 9.818633] usb 5-2: configuration #1 chosen from 2 choices [ 10.063244] usb 7-2: new low speed USB device using uhci_hcd and address 2 [ 10.239433] usb 7-2: New USB device found, idVendor=0a81, idProduct=0101 [ 10.239513] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 10.239583] usb 7-2: Product: USB Keyboard [ 10.239647] usb 7-2: Manufacturer: CHESEN [ 10.239751] usb 7-2: configuration #1 chosen from 1 choice [ 10.087948] usbcore: registered new interface driver hiddev [ 10.294601] input: CHESEN USB Keyboard as /class/input/input2 [ 10.294712] generic-usb 0003:0A81:0101.0001: input,hidraw0: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:1d.2-2/input0 [ 10.323447] input: CHESEN USB Keyboard as /class/input/input3 [ 10.323553] generic-usb 0003:0A81:0101.0002: input,hidraw1: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:1d.2-2/input1 [ 10.323661] usbcore: registered new interface driver usbhid [ 10.323729] usbhid: v2.6:USB HID core driver [ 14.359298] usb-storage: device scan complete [ 14.168125] scsi 7:0:0:0: Direct-Access General USB Flash Disk 1100 PQ: 0 ANSI: 0 CCS [ 14.168899] sd 7:0:0:0: Attached scsi generic sg2 type 0 [ 14.169829] sd 7:0:0:0: [sdb] 3915776 512-byte logical blocks: (2.00 GB/1.86 GiB) [ 14.362516] sd 7:0:0:0: [sdb] Write Protect is off [ 14.362599] sd 7:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 14.362601] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 14.365220] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 14.365301] sdb: sdb1 [ 14.370712] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 14.370782] sd 7:0:0:0: [sdb] Attached SCSI removable disk [ 23.934309] qla2xxx 0000:1a:00.1: Cable is unplugged... [ 24.979655] EXT3 FS on sda6, internal journal [ 25.917323] loop: module loaded [ 26.173606] Open vSwitch 0.99.2, built Feb 23 2010 16:45:01 [ 26.185013] Open vSwitch Bridge Compatibility, built Feb 23 2010 16:45:00 [ 29.136035] kjournald starting. Commit interval 5 seconds [ 28.945415] EXT3 FS on sdb1, internal journal [ 28.945539] EXT3-fs: mounted filesystem with writeback data mode. [ 29.138764] kjournald starting. Commit interval 5 seconds [ 28.947013] EXT3 FS on dm-3, internal journal [ 28.947136] EXT3-fs: mounted filesystem with writeback data mode. [ 29.140524] kjournald starting. Commit interval 5 seconds [ 28.948792] EXT3 FS on dm-1, internal journal [ 28.948914] EXT3-fs: mounted filesystem with writeback data mode. [ 29.142300] kjournald starting. Commit interval 5 seconds [ 28.950620] EXT3 FS on dm-2, internal journal [ 28.950742] EXT3-fs: mounted filesystem with writeback data mode. [ 29.020559] Adding 1949688k swap on /dev/mapper/vg1-swap. Priority:-1 extents:1 across:1949688k [ 29.609951] device xenbr0 entered promiscuous mode [ 29.627710] device xenbr1 entered promiscuous mode [ 29.628308] device eth0 entered promiscuous mode [ 29.628397] device eth1 entered promiscuous mode [ 29.628483] device eth2 entered promiscuous mode [ 29.628564] device eth3 entered promiscuous mode [ 29.614962] bnx2: eth5: using MSIX [ 31.010185] NET: Registered protocol family 10 [ 31.010593] lo: Disabled Privacy Extensions [ 31.011836] ADDRCONF(NETDEV_UP): eth5: link is not ready [ 31.438127] bnx2: eth5 NIC Copper Link is Up, 100 Mbps full duplex [ 31.438519] ADDRCONF(NETDEV_CHANGE): eth5: link becomes ready [ 32.309412] xenbus_probe wake_waiting [ 32.309474] xenbus_probe wake_waiting [ 32.315872] XENBUS: Unable to read cpu state [ 32.316025] XENBUS: Unable to read cpu state [ 32.316279] xenbus_probe_devices backend [ 32.316429] xenbus_probe_devices failed xenbus_directory [ 32.316482] backend_probe_and_watch devices probed ok [ 32.316618] backend_probe_and_watch watch add ok ok [ 32.316671] backend_probe_and_watch all done [ 32.316721] xenbus_probe_devices device [ 32.319452] xenbus_probe_devices failed xenbus_directory [ 32.319506] frontend_probe_and_watch devices probed ok [ 32.319727] frontend_probe_and_watch watch add ok ok [ 32.319780] frontend_probe_and_watch all done [ 42.106622] eth5: no IPv6 routers present