| |
|
 |
|
 |
|
|
|
| |
|
|
xen-users
Re: [Xen-users] AsteriskNOW on Xen Choppiness
Hi,
I've a 'very stable' domU (PV) working with Asterisk + FreePBX + 2BRI
Digium Clone Card (PCi-E) in a Xen 3.4.2 from sources with Debian
Lenny 2.6.26 for dom0/domU and pci-passthrough (uf!)
The system works well for two months and seems very stable with
medium-full load. It's based in a very cheap motherboard from ASUS and
an AMD x2 processor.
J.
2010/2/5 Ian Murray <murrayie@xxxxxxxxxxx>:
> I'll Reply to both Ian and Ben....
>
>
>
>
>> Ian Tobin said the following:
>> > Hi,
>> >
>> > Just curious, are you using this for IP related calls only, no analogue
>> > etc?
>> >
>
> Just IP, but I did use an X100p clone with PCI-passthrough. When the car dis
> not present, it is saying that it is using the dummy timer. When in and
> passed through, it recognises it and configures it.
>
>
>> >
>> If you are using Zaptel hardware for an analogue line (ie a TDM400 or similar
>> card) you will not get the interrupt performance required for reasonable call
>> quality. I fought this long and hard a couple years ago. There is a
>> utility, I
>> forget its name off-hand, that will test the interrupt performance for the
>> Zaptel hardware. voip-info.org should have information on it.
>
> Although the zt hardware was present for timing purposes, no calls went over
> it though. I will abandon my plans to use a domU with a TDMA clone, using
> passthrough.
>
>>
>> If you are in a pure voip situation, where all call traffic is handled over
>> the
>> network and not with hardware interfaces, you should be able to use a DomU
>> without much difficulty. The one gotcha is that you will need to use the
>> dummy
>> Zaptel timing device for conference calling and music on hold to work
>> properly.
>
> Fine for me, but my brother's setup needs hardware, so will probably go
> bare-metal for that. Ho hum
>
> Thanks for the previous replies,
>
> Ian
>
>
>
>
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
>
--
_____________________________________________
Francisco Javier Funes Nieto [esencia@xxxxxxxxx]
CANONIGOS
Servicios Informáticos para PYMES.
Cl. Cruz 2, 1º Oficina 7
Tlf: 958.536759 / 661134556
Fax: 958.521354
GRANADA - 18002
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
|
|
| |
|
Home